【NOI2016】国王饮水记【贪心】【斜率优化】【决策单调性】

传送门

首先比h1h_1h1小的肯定没用,直接无视

然后考虑合并的顺序

①在无限制的情况下,合并多个不如一个一个合并

a<b<ca<b<ca<b<c时,a+b2+c2>a+b+c3{{a+b \over 2}+c\over 2}>{{a+b+c}\over 3}22a+b+c>3a+b+c

②先合并小的比先合并大的优

整理一下,就是把>h1> h_1>h1的从小到大排序,然后每次把当前的和序列中靠前的若干个合并

显然是个斜率优化的模型

fk,nf_{k,n}fk,n表示前nnn个合并kkk次的最大值

fk,n=max⁡1≤i<nfi+Sn−Sin−i+1f_{k,n}=\max_{1\leq i<n}\frac{f_i+S_n-S_i}{n-i+1}fk,n=1i<nmaxni+1fi+SnSi

推一下式子发现很恶心

但注意到这个式子本身就是斜率的形式

可以看成所有(i−1,Si−fi)(i-1,S_i-f_i)(i1,Sifi)(n,Sn)(n,S_n)(n,Sn)的最大斜率

意识流一波,维护一个下凸壳,每次最优决策是过(n,Sn)(n,S_n)(n,Sn)的一条与凸壳切于端点的直线,可以三分一下……

注意到hhh严格单调增,所以(n,Sn)(n,S_n)(n,Sn)本身就组成了下凸壳

对于两个决策k1,k2k_1,k_2k1,k2,设iiik2k_2k2优于k1k_1k1(i,Si)(i,S_i)(i,Si),即(k1−1,Sk1−fk1),(k2−1,Sk2−fk2),(i,Si)(k_1-1,S_{k_1}-f_{k_1}),(k_2-1,S_{k_2}-f_{k_2}),(i,S_i)(k11,Sk1fk1),(k21,Sk2fk2),(i,Si)往上翘

在这里插入图片描述
如图,ki−1,i>kk2,ik_{i-1,i}>k_{k_2,i}ki1,i>kk2,i,又因为ki,i+1>ki−1,ik_{i,i+1}>k_{i-1,i}ki,i+1>ki1,i,所以对于i+1i+1i+1 k2k_2k2仍然更优

所以可以把k1k_1k1弹掉

这样可以做到O(nkp)O(nkp)O(nkp) 这里因为最多只能取n−1n-1n1次合并,所以n,kn,kn,k是同阶的

然后可以用低精度算dpdpdp并记录决策,最后用高精度算一次 复杂度O(nk+np)O(nk+np)O(nk+np)

// This is an empty program with decimal lib#include <cstdlib>
#include <cstring>
#include <string>
#include <cctype>
#include <cstdio>
// ---------- decimal lib start ----------const int PREC = 3500;class Decimal {public:Decimal();Decimal(const std::string &s);Decimal(const char *s);Decimal(int x);Decimal(long long x);Decimal(long double x);bool is_zero() const;// p (p > 0) is the number of digits after the decimal pointstd::string to_string(int p) const;long double to_double() const;friend Decimal operator + (const Decimal &a, const Decimal &b);friend Decimal operator + (const Decimal &a, int x);friend Decimal operator + (int x, const Decimal &a);friend Decimal operator + (const Decimal &a, long long x);friend Decimal operator + (long long x, const Decimal &a);friend Decimal operator + (const Decimal &a, long double x);friend Decimal operator + (long double x, const Decimal &a);friend Decimal operator - (const Decimal &a, const Decimal &b);friend Decimal operator - (const Decimal &a, int x);friend Decimal operator - (int x, const Decimal &a);friend Decimal operator - (const Decimal &a, long long x);friend Decimal operator - (long long x, const Decimal &a);friend Decimal operator - (const Decimal &a, long double x);friend Decimal operator - (long double x, const Decimal &a);friend Decimal operator * (const Decimal &a, int x);friend Decimal operator * (int x, const Decimal &a);friend Decimal operator / (const Decimal &a, int x);friend bool operator < (const Decimal &a, const Decimal &b);friend bool operator > (const Decimal &a, const Decimal &b);friend bool operator <= (const Decimal &a, const Decimal &b);friend bool operator >= (const Decimal &a, const Decimal &b);friend bool operator == (const Decimal &a, const Decimal &b);friend bool operator != (const Decimal &a, const Decimal &b);Decimal & operator += (int x);Decimal & operator += (long long x);Decimal & operator += (long double x);Decimal & operator += (const Decimal &b);Decimal & operator -= (int x);Decimal & operator -= (long long x);Decimal & operator -= (long double x);Decimal & operator -= (const Decimal &b);Decimal & operator *= (int x);Decimal & operator /= (int x);friend Decimal operator - (const Decimal &a);// These can't be calledfriend Decimal operator * (const Decimal &a, long double x);friend Decimal operator * (long double x, const Decimal &a);friend Decimal operator / (const Decimal &a, long double x);Decimal & operator *= (long double x);Decimal & operator /= (long double x);private:static const int len = PREC / 9 + 1;static const int mo = 1000000000;static void append_to_string(std::string &s, long long x);bool is_neg;long long integer;int data[len];void init_zero();void init(const char *s);
};Decimal::Decimal() {this->init_zero();
}Decimal::Decimal(const char *s) {this->init(s);
}Decimal::Decimal(const std::string &s) {this->init(s.c_str());
}Decimal::Decimal(int x) {this->init_zero();if (x < 0) {is_neg = true;x = -x;}integer = x;
}Decimal::Decimal(long long x) {this->init_zero();if (x < 0) {is_neg = true;x = -x;}integer = x;
}Decimal::Decimal(long double x) {this->init_zero();if (x < 0) {is_neg = true;x = -x;}integer = (long long)x;x -= integer;for (int i = 0; i < len; i++) {x *= mo;if (x < 0) x = 0;data[i] = (int)x;x -= data[i];}
}void Decimal::init_zero() {is_neg = false;integer = 0;memset(data, 0, len * sizeof(int));
}bool Decimal::is_zero() const {if (integer) return false;for (int i = 0; i < len; i++) {if (data[i]) return false;}return true;
}void Decimal::init(const char *s) {this->init_zero();is_neg = false;integer = 0;// find the first digit or the negative signwhile (*s != 0) {if (*s == '-') {is_neg = true;++s;break;} else if (*s >= 48 && *s <= 57) {break;}++s;}// read the integer partwhile (*s >= 48 && *s <= 57) {integer = integer * 10 + *s - 48;++s;}// read the decimal partif (*s == '.') {int pos = 0;int x = mo / 10;++s;while (pos < len && *s >= 48 && *s <= 57) {data[pos] += (*s - 48) * x;++s;x /= 10;if (x == 0) {++pos;x = mo / 10;}}}
}void Decimal::append_to_string(std::string &s, long long x) {if (x == 0) {s.append(1, 48);return;}char _[30];int cnt = 0;while (x) {_[cnt++] = x % 10;x /= 10;}while (cnt--) {s.append(1, _[cnt] + 48);}
}std::string Decimal::to_string(int p) const {std::string ret;if (is_neg && !this->is_zero()) {ret = "-";}append_to_string(ret, this->integer);ret.append(1, '.');for (int i = 0; i < len; i++) {// append data[i] as "%09d"int x = mo / 10;int tmp = data[i];while (x) {ret.append(1, 48 + tmp / x);tmp %= x;x /= 10;if (--p == 0) {break;}}if (p == 0) break;}if (p > 0) {ret.append(p, '0');}return ret;
}long double Decimal::to_double() const {long double ret = integer;long double k = 1.0;for (int i = 0; i < len; i++) {k /= mo;ret += k * data[i];}if (is_neg) {ret = -ret;}return ret;
}bool operator < (const Decimal &a, const Decimal &b) {if (a.is_neg != b.is_neg) {return a.is_neg && (!a.is_zero() || !b.is_zero());} else if (!a.is_neg) {// a, b >= 0if (a.integer != b.integer) {return a.integer < b.integer;}for (int i = 0; i < Decimal::len; i++) {if (a.data[i] != b.data[i]) {return a.data[i] < b.data[i];}}return false;} else {// a, b <= 0if (a.integer != b.integer) {return a.integer > b.integer;}for (int i = 0; i < Decimal::len; i++) {if (a.data[i] != b.data[i]) {return a.data[i] > b.data[i];}}return false;}
}bool operator > (const Decimal &a, const Decimal &b) {if (a.is_neg != b.is_neg) {return !a.is_neg && (!a.is_zero() || !b.is_zero());} else if (!a.is_neg) {// a, b >= 0if (a.integer != b.integer) {return a.integer > b.integer;}for (int i = 0; i < Decimal::len; i++) {if (a.data[i] != b.data[i]) {return a.data[i] > b.data[i];}}return false;} else {// a, b <= 0if (a.integer != b.integer) {return a.integer < b.integer;}for (int i = 0; i < Decimal::len; i++) {if (a.data[i] != b.data[i]) {return a.data[i] < b.data[i];}}return false;}
}bool operator <= (const Decimal &a, const Decimal &b) {if (a.is_neg != b.is_neg) {return a.is_neg || (a.is_zero() && b.is_zero());} else if (!a.is_neg) {// a, b >= 0if (a.integer != b.integer) {return a.integer < b.integer;}for (int i = 0; i < Decimal::len; i++) {if (a.data[i] != b.data[i]) {return a.data[i] < b.data[i];}}return true;} else {// a, b <= 0if (a.integer != b.integer) {return a.integer > b.integer;}for (int i = 0; i < Decimal::len; i++) {if (a.data[i] != b.data[i]) {return a.data[i] > b.data[i];}}return true;}
}bool operator >= (const Decimal &a, const Decimal &b) {if (a.is_neg != b.is_neg) {return !a.is_neg || (a.is_zero() && b.is_zero());} else if (!a.is_neg) {// a, b >= 0if (a.integer != b.integer) {return a.integer > b.integer;}for (int i = 0; i < Decimal::len; i++) {if (a.data[i] != b.data[i]) {return a.data[i] > b.data[i];}}return true;} else {// a, b <= 0if (a.integer != b.integer) {return a.integer < b.integer;}for (int i = 0; i < Decimal::len; i++) {if (a.data[i] != b.data[i]) {return a.data[i] < b.data[i];}}return true;}
}bool operator == (const Decimal &a, const Decimal &b) {if (a.is_zero() && b.is_zero()) return true;if (a.is_neg != b.is_neg) return false;if (a.integer != b.integer) return false;for (int i = 0; i < Decimal::len; i++) {if (a.data[i] != b.data[i]) return false;}return true;
}bool operator != (const Decimal &a, const Decimal &b) {return !(a == b);
}Decimal & Decimal::operator += (long long x) {if (!is_neg) {if (integer + x >= 0) {integer += x;} else {bool last = false;for (int i = len - 1; i >= 0; i--) {if (last || data[i]) {data[i] = mo - data[i] - last;last = true;} else {last = false;}}integer = -x - integer - last;is_neg = true;}} else {if (integer - x >= 0) {integer -= x;} else {bool last = false;for (int i = len - 1; i >= 0; i--) {if (last || data[i]) {data[i] = mo - data[i] - last;last = true;} else {last = false;}}integer = x - integer - last;is_neg = false;}}return *this;
}Decimal & Decimal::operator += (int x) {return *this += (long long)x;
}Decimal & Decimal::operator -= (int x) {return *this += (long long)-x;
}Decimal & Decimal::operator -= (long long x) {return *this += -x;
}Decimal & Decimal::operator /= (int x) {if (x < 0) {is_neg ^= 1;x = -x;}int last = integer % x;integer /= x;for (int i = 0; i < len; i++) {long long tmp = 1LL * last * mo + data[i];data[i] = tmp / x;last = tmp - 1LL * data[i] * x;}if (is_neg && integer == 0) {int i;for (i = 0; i < len; i++) {if (data[i] != 0) {break;}}if (i == len) {is_neg = false;}}return *this;
}Decimal & Decimal::operator *= (int x) {if (x < 0) {is_neg ^= 1;x = -x;} else if (x == 0) {init_zero();return *this;}int last = 0;for (int i = len - 1; i >= 0; i--) {long long tmp = 1LL * data[i] * x + last;last = tmp / mo;data[i] = tmp - 1LL * last * mo;}integer = integer * x + last;return *this;
}Decimal operator - (const Decimal &a) {Decimal ret = a;// -0 = 0if (!ret.is_neg && ret.integer == 0) {int i;for (i = 0; i < Decimal::len; i++) {if (ret.data[i] != 0) break;}if (i < Decimal::len) {ret.is_neg = true;}} else {ret.is_neg ^= 1;}return ret;
}Decimal operator + (const Decimal &a, int x) {Decimal ret = a;return ret += x;
}Decimal operator + (int x, const Decimal &a) {Decimal ret = a;return ret += x;
}Decimal operator + (const Decimal &a, long long x) {Decimal ret = a;return ret += x;
}Decimal operator + (long long x, const Decimal &a) {Decimal ret = a;return ret += x;
}Decimal operator - (const Decimal &a, int x) {Decimal ret = a;return ret -= x;
}Decimal operator - (int x, const Decimal &a) {return -(a - x);
}Decimal operator - (const Decimal &a, long long x) {Decimal ret = a;return ret -= x;
}Decimal operator - (long long x, const Decimal &a) {return -(a - x);
}Decimal operator * (const Decimal &a, int x) {Decimal ret = a;return ret *= x;
}Decimal operator * (int x, const Decimal &a) {Decimal ret = a;return ret *= x;
}Decimal operator / (const Decimal &a, int x) {Decimal ret = a;return ret /= x;
}Decimal operator + (const Decimal &a, const Decimal &b) {if (a.is_neg == b.is_neg) {Decimal ret = a;bool last = false;for (int i = Decimal::len - 1; i >= 0; i--) {ret.data[i] += b.data[i] + last;if (ret.data[i] >= Decimal::mo) {ret.data[i] -= Decimal::mo;last = true;} else {last = false;}}ret.integer += b.integer + last;return ret;} else if (!a.is_neg) {// a - |b|return a - -b;} else {// b - |a|return b - -a;}
}Decimal operator - (const Decimal &a, const Decimal &b) {if (!a.is_neg && !b.is_neg) {if (a >= b) {Decimal ret = a;bool last = false;for (int i = Decimal::len - 1; i >= 0; i--) {ret.data[i] -= b.data[i] + last;if (ret.data[i] < 0) {ret.data[i] += Decimal::mo;last = true;} else {last = false;}}ret.integer -= b.integer + last;return ret;} else {Decimal ret = b;bool last = false;for (int i = Decimal::len - 1; i >= 0; i--) {ret.data[i] -= a.data[i] + last;if (ret.data[i] < 0) {ret.data[i] += Decimal::mo;last = true;} else {last = false;}}ret.integer -= a.integer + last;ret.is_neg = true;return ret;}} else if (a.is_neg && b.is_neg) {// a - b = (-b) - (-a)return -b - -a;} else if (a.is_neg) {// -|a| - breturn -(-a + b);} else {// a - -|b|return a + -b;}
}Decimal operator + (const Decimal &a, long double x) {return a + Decimal(x);
}Decimal operator + (long double x, const Decimal &a) {return Decimal(x) + a;
}Decimal operator - (const Decimal &a, long double x) {return a - Decimal(x);
}Decimal operator - (long double x, const Decimal &a) {return Decimal(x) - a;
}Decimal & Decimal::operator += (long double x) {*this = *this + Decimal(x);return *this;
}Decimal & Decimal::operator -= (long double x) {*this = *this - Decimal(x);return *this;
}Decimal & Decimal::operator += (const Decimal &b) {*this = *this + b;return *this;
}Decimal & Decimal::operator -= (const Decimal &b) {*this = *this - b;return *this;
}// ---------- decimal lib end ----------
inline int read()
{int ans=0;char c=getchar();while (!isdigit(c)) c=getchar();while (isdigit(c)) ans=(ans<<3)+(ans<<1)+(c^48),c=getchar();return ans;
}
#include <algorithm>
#include <iostream>
#define MAXN 8005
using namespace std;
int s[MAXN],tot;
long double f[2][MAXN];
short key[MAXN][MAXN];
int q[MAXN],head,tail;
inline long double calc(int n,int i,int t){return (s[n]-s[i]+f[t^1][i])/(n-i+1);}
inline bool cmp(int i,int j,int k,int t){return (s[i]-f[t^1][i]-s[j]+f[t^1][j])*(i-k)<(s[i]-f[t^1][i]-s[k]+f[t^1][k])*(i-j);}
Decimal getans(int k,int n)
{if (!k) return s[1];return (s[n]-s[key[k][n]]+getans(k-1,key[k][n]))/(n-key[k][n]+1);
}
long double ans=0;
int pos;
int main()
{int n,k,p;n=read(),k=read(),p=read();s[tot=1]=read();for (int i=1;i<n;i++){int t=read();if (t>s[1]) s[++tot]=t;}n=tot;sort(s+1,s+n+1);if (k>=n) k=n-1;for (int i=1;i<=n;i++) s[i]+=s[i-1],f[0][i]=s[1];f[1][1]=s[1];for (int i=1,t=1;i<=k;i++,t^=1){head=1,tail=1;q[1]=1;for (int j=2;j<=n;j++){while (head<tail&&calc(j,q[head],t)<calc(j,q[head+1],t)) ++head;f[t][j]=calc(j,key[i][j]=q[head],t);while (head<tail&&cmp(j,q[tail],q[tail-1],t)) --tail;q[++tail]=j;}}cout<<getans(k,n).to_string(2*p);return 0;
}

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处:http://www.mzph.cn/news/315113.shtml

如若内容造成侵权/违法违规/事实不符,请联系多彩编程网进行投诉反馈email:809451989@qq.com,一经查实,立即删除!

相关文章

CF946D Timetable 背包dp + 思维转换

传送门 文章目录题意&#xff1a;思路&#xff1a;题意&#xff1a; n,m,k≤500n,m,k\le500n,m,k≤500 思路&#xff1a; 将其转换成背包的模型&#xff0c;就可以想出来一个很明显的dpdpdp状态&#xff1a;f[i][j]f[i][j]f[i][j]表示前iii行花费了jjj的最小代价&#xff0c;…

.NET开发框架(三)-高可用服务器端设计

我们对框架功能作了简述&#xff0c;演示视频请点击 这里查看 &#xff0c;本章节&#xff0c;我们专门讲解一下&#xff0c;如何在Window服务器下&#xff0c;设计高可用的框架。我们的框架设计采用的是Window版本的服务端设计&#xff1a;整体框架图如下&#xff0c;为什么我…

P1537 弹珠 背包可行性dp

传送门 文章目录题意&#xff1a;思路&#xff1a;题意&#xff1a; 思路&#xff1a; 疯狂水文章。 这个很明显是个背包&#xff0c;我们开一个布尔数组&#xff0c;之后枚举每组的个数&#xff0c;让后枚举1−61-61−6&#xff0c;再枚举容量kkk&#xff0c;注意顺序不能错了…

.NET Core 3.0中的WinForms创建集中式拉取请求中心

Windows 窗体&#xff08;或简称 WinForms&#xff09;&#xff0c;多年来被用于开发具有丰富和交互式界面的基于 Windows 的强大应用程序。各类企业对这些桌面应用程序的投入量非常巨大&#xff0c;每月有大约 240 万开发人员使用 Visual Studio 创建桌面式应用。利用和扩展现…

CF296B dp\容斥

传送门 文章目录题意&#xff1a;思路&#xff1a;题意&#xff1a; n≤1e5n\le1e5n≤1e5 思路&#xff1a; 求方案数基本就是考虑dpdpdp了&#xff0c;看到nnn这么大可以考虑一下分情况讨论的dpdpdp状态。 设f[i][j]f[i][j]f[i][j]表示到了第iii个&#xff0c;状态为jjj的方…

asp.net core 自定义异常处理中间件

Intro在 asp.net core 中全局异常处理&#xff0c;有时候可能不能满足我们的需要&#xff0c;可能就需要自己自定义一个中间件处理了&#xff0c;最近遇到一个问题&#xff0c;有一些异常&#xff0c;不希望记录错误日志&#xff0c;目前主要是用户请求取消导致的 TaskCanceled…

CF786B Legacy 线段树优化建图

传送门 文章目录题意&#xff1a;思路&#xff1a;题意&#xff1a; 实现如下连边后跑最短路。 思路&#xff1a; 优化建图板子题&#xff0c;优化思路就是将区间分割成若干个线段树上的线段&#xff0c;与线段树分治有点类似&#xff0c;由于有点向区间也有区间向点的边&a…

【ZJOI2015】幻想乡 Wi-Fi 搭建计划【几何】【贪心】【dp】

传送门 题意&#xff1a;一个x∈(−∞,∞),y∈[0,R]x\in(-\infin,\infin),y\in[0,R]x∈(−∞,∞),y∈[0,R]的矩形中有nnn个点&#xff0c;矩形外有mmm个半径均为RRR的圆&#xff0c;有独立的代价cic_ici​。求覆盖最多的点所需的最小代价。 n,m≤100n,m\leq100n,m≤100 显然先…

.NET架构开发应知应会

.NET程序是基于.NET framework、.NET Core、Mono、UWP【.NET实现】开发和运行的 &#xff0c;定义以上【.NET实现】的标准规范称为.NET StandardL1&#xff1a;.NET Standard.NET标准是一组API集合&#xff0c;由上层三种【.NET实现】的Basic Class Library实现&#xff0c;更正…

几个冷门字符串算法的学习笔记(最小表示法,exKMP,Lyndon Word)

所有下标均从1开始 最小表示法 给定一个串&#xff0c;求字典序最小的循环同构。 我们把串复制一遍接在后面&#xff0c;然后求出[1,N][1,N][1,N]开始的长为NNN的子串中最小的 先设i1,j2i1,j2i1,j2 然后暴力找出iii和jjj往后匹配的第一个不同的位置&#xff0c;记为ikikik…

.NET Core IdentityServer4实战 第Ⅴ章-单点登录

OiDc可以说是OAuth的改造版&#xff0c;在最初的OAuth中&#xff0c;我们需要先请求一下认证服务器获取下Access_token&#xff0c;然后根据Access_token去Get资源服务器, 况且OAuth1 和 2 完全不兼容&#xff0c;易用性差&#xff0c;而OIDC可以在登陆的时候就把信息返回给你&…

【CF594E】Cutting the Line 【贪心】【Lyndon Word】【扩展kmp】

传送门 题意&#xff1a;给一个字符串SSS和正整数kkk&#xff0c;将SSS分成最多kkk段&#xff0c;每段不变或翻转&#xff0c;使得最后的字典序最小。 ∣S∣≤5106|S|\leq5\times10^6∣S∣≤5106 发现不翻转可以看成拆成若干单字符分别翻转&#xff0c;所以先分析一下必须翻转…

一份好的工作总结才能帮你升职加薪

这里是Z哥的个人公众号每周五早8点 按时送达当然了&#xff0c;也会时不时加个餐&#xff5e;我的第「79」篇原创敬上最近有点忙&#xff0c;搬出之前攒的一篇文章来应急一下。一篇能助你挣更多钱的文章。好了&#xff0c;下面开始。我的读者们大部分是互联网行业的&#xff0c…

腾讯开源软件镜像站上线

腾讯开源软件镜像站(Tencent Open Source Mirror Site)已于近日上线&#xff0c;其官方名称为「腾讯云软件源」&#xff0c;由腾讯云提供支持。官方表示搭建此开源镜像站的目的在于宣传自由软件的价值&#xff0c;提高自由软件社区文化氛围&#xff0c;推广自由软件在国内的应用…

ASP.NET Core on K8S学习初探(2)

“ [LOG] ASP.NET Core on K8S Starting...”在上一篇《单节点环境搭建》中&#xff0c;通过Docker for Windows在Windows开发机中搭建了一个单节点的K8S环境&#xff0c;接下来就是动人心弦的部署ASP.NET Core API到K8S了。但是&#xff0c;在部署之前&#xff0c;我还是把基本…

Educational Codeforces Round 96 E. String Reversa 线段树模拟序列交换

传送门 文章目录题意&#xff1a;思路&#xff1a;题意&#xff1a; 思路&#xff1a; 与上一篇题解大同小异&#xff0c;无非就是不需要枚举排列了。 // Problem: E. String Reversal // Contest: Codeforces - Educational Codeforces Round 96 (Rated for Div. 2) // URL:…

ASP.NET Core on K8S学习初探(1)

“ [LOG] ASP.NET Core on K8S Starting...”01—写在之前当近期的一个App上线后&#xff0c;发现目前的docker实例&#xff08;应用服务BFF中台服务工具服务&#xff09;已经越来越多了&#xff0c;而我司目前没有专业的运维人员&#xff0c;发现运维的成本逐渐开始上来&#…

.NET Core IdentityServer4实战 第Ⅳ章-集成密码登陆模式

回顾下ClientCredentials模式&#xff0c;在ReSourceApi中定义了我们公开服务&#xff0c;第三方网站想要去访问ReSourceApi则需要在身份验证服务中获取toekn&#xff0c;根据token的内容&#xff0c;硬编码去访问公开服务&#xff08;ResApi&#xff09;,这个还是非常简单的&a…

Codeforces Round #656 (Div. 3) F. Removing Leaves 贪心 + 模拟

传送门 文章目录题意&#xff1a;思路&#xff1a;题意&#xff1a; 思路&#xff1a; 首先有一个贪心策略就是每次都找一个叶子节点最多的点&#xff0c;让后删掉他的kkk个叶子节点&#xff0c;现在我们就来考虑如何模拟这个过程。 我们整一个vector<set<int>>ve…

.NetCore中三种注入生命周期的思考

.NetCore彻底诠释了“万物皆可注入”这句话的含义&#xff0c;在.NetCore中到处可见注入的使用。因此core中也提供了三种注入方式的生命周期使用&#xff0c;分别是&#xff1a;AddTransient&#xff1a;每次请求&#xff0c;都获取一个新的实例。即使同一个请求获取多次也会是…