如何在PowerPoint中制作打字机或命令行动画

Adding quirky animations to your Microsoft PowerPoint presentation gives your slideshow a little extra life. Not only will adding a typewriter or command line animation entertain your audience, but it will also keep them focused on the text.

在您的Microsoft PowerPoint演示文稿中添加古怪的动画可以使幻灯片更加生动有趣。添加打字机或命令行动画不仅会吸引您的观众，而且还将使他们专注于文本。

创建打字机/命令行动画 (Creating a Typewriter/Command Line Animation)

The typewriter and command line animations are very similar. The only differentiating factor is text style. If you’re going with the vintage typewriter look, we recommend going with a 12pt Courier New font in black. For the command-line look, we recommend using a 12pt Lucida Console font in white (or green) over a black background. Since the animations are identical, we’ll go with the command-line style as our example here.

打字机和命令行动画非常相似。唯一的区别因素是文本样式。如果您要使用老式打字机外观，建议您使用12pt黑色的Courier New字体。对于命令行外观，我们建议在黑色背景上使用白色(或绿色)的12pt Lucida Console字体。由于动画是相同的，因此这里以命令行样式为例。

Go ahead and open PowerPoint and go to the slide where you want the animation.

继续并打开PowerPoint，然后转到需要动画的幻灯片。

You’ll need to make sure you’ve got a black background to work against if you’re going for the command-line look. Head over to the “Insert” tab and then click the “Shapes” button.

如果要使用命令行外观，则需要确保有黑色背景可以使用。转到“插入”选项卡，然后单击“形状”按钮。

A dropdown menu will appear. From the “Rectangles” group, select “Rectangle.”

将会出现一个下拉菜单。从“矩形”组中，选择“矩形”。

Click and drag your mouse on the slide to draw the shape. You could make the shape take up the entire slide or make it smaller if you’re demonstrating something on a smaller scale.

单击并在幻灯片上拖动鼠标以绘制形状。如果要以较小的比例演示某些内容，则可以使形状占据整个幻灯片或使其更小。

Head over to the shapes “Format” tab and select “Shape Fill” from the “Shape Styles” group.

转到形状的“格式”选项卡，然后从“形状样式”组中选择“形状填充”。

Select black from the drop-down menu.

从下拉菜单中选择黑色。

Do the same for the “Shape Outline.”

对“形状轮廓”执行相同的操作。

Finally, click and drag to size the shape the way you want it.

最后，单击并拖动以根据需要调整形状的大小。

In this example, we’re covering the entire slide.

在此示例中，我们将覆盖整个幻灯片。

Now it’s time to insert your text. Head over to the “Insert” tab and click the “Text Box” button.

现在是时候插入您的文本了。转到“插入”选项卡，然后单击“文本框”按钮。

Note: Yes, you could type text directly into the shape. But, using a text box gives you a little more control over exactly where that text appears.

注意：是的，您可以直接在形状中输入文本。但是，使用文本框可以使您更好地控制文本的确切位置。

Click and drag your mouse on the slide to draw the text box.

单击并在幻灯片上拖动鼠标以绘制文本框。

Make sure your font’s settings are correct for your respective animation. Since we’re doing the command-line animation for this example, we’ll select Lucida Console (1), 12pt font (2) and white (3).

确保您的字体设置对于您各自的动画是正确的。由于我们在此示例中执行命令行动画，因此我们将选择Lucida Console(1)，12pt字体(2)和白色(3)。

Go ahead and type the text you want. When you’re done, select the text box, switch to the “Animations” tab, and then select “Appear” from the “Animation” section.

继续输入所需的文本。完成后，选择文本框，切换到“动画”选项卡，然后从“动画”部分中选择“出现”。

On the same tab, click the “Animation Pane” button.

在同一选项卡上，单击“动画窗格”按钮。

The animation pane will appear on the right-hand side of the window. Select your animation and then click the arrow that appears.

动画窗格将出现在窗口的右侧。选择动画，然后单击出现的箭头。

From the drop-down menu, select “Effect Options.”

从下拉菜单中，选择“效果选项”。

In the window that appears, select the arrow next to “Animate text.” In the dropdown menu that appears, select “By letter.”

在出现的窗口中，选择“动画文本”旁边的箭头。在出现的下拉菜单中，选择“按字母排序”。

Next, enter 0.1 in the “seconds delay between letters” box and then click “OK.”

接下来，在“字母之间的秒数延迟”框中输入0.1，然后单击“确定”。

As a matter of good practice, check the animation to make sure it looks good.

作为一种好的做法，请检查动画以确保它看起来不错。

And that’s it. It’s a fun way to demonstrate commands during a presentation or to hold your audience’s attention with an old-fashioned typewriter animation.

就是这样。这是一种有趣的方式，可以在演示过程中演示命令或使用老式打字机动画来吸引听众的注意。