airpods2使用
Just bought yourself or received a new pair of AirPods or AirPods Pro? Welcome to the truly wireless earphones life. Setting up AirPods is quite straightforward, but here’s how to customize and get the most of your AirPods or AirPods Pro.
刚买了自己还是收到了新的AirPods或AirPods Pro？ 欢迎来到真正的无线耳机生活。 设置AirPods非常简单，但是以下是自定义并充分利用AirPods或AirPods Pro的方法。
如何将AirPods或AirPods Pro与iPhone和iPad配对 (How to Pair Your AirPods or AirPods Pro to iPhone and iPad)
Pairing your new headphones is as simple as it gets. After you unbox your AirPods, hold them near your unlocked iPhone and iPad and flick the case open.
配对新耳机就这么简单。 拆开AirPods的包装后，将它们放在未锁定的iPhone和iPad旁边，然后轻拂盒子。
Then, press and hold the “Setup” button, which is at the back of the AirPods case. In a couple of seconds, you’ll see a connection prompt on your iPhone or iPad.
然后，按住AirPods盒背面的“设置”按钮。 几秒钟后，您将在iPhone或iPad上看到连接提示。
If the prompt doesn’t appear automatically, try holding the physical button on the back of the case for several moments to enable pairing mode.
如果提示没有自动出现，请尝试按住机箱背面的物理按钮片刻以启用配对模式。
Next, all you have to do is tap the “Connect” button.
接下来，您要做的就是点击“连接”按钮。
If you’re using second-generation AirPods or AirPods Pro, you’ll also receive a prompt asking if you want to enable the Hey Siri functionality or if you want Siri to read messages out to you aloud.
如果您使用的是第二代AirPods或AirPods Pro，还会收到一条提示，询问您是否要启用Hey Siri功能或是否要Siri大声读出消息。
Once you tap the “Done” button, your AirPods will be connected and paired. You should now see battery life information in the pop-up message.
一旦点击“完成”按钮，您的AirPods将被连接并配对。 现在，您应该在弹出消息中看到电池寿命信息。
If you’re signed in to iCloud, your AirPods will be automatically paired with all of your Apple devices (including iPhone, iPad, Mac, and Apple Watch).
如果您登录到iCloud，您的AirPods将自动与您所有的Apple设备(包括iPhone，iPad，Mac和Apple Watch)配对。
如何知道您的AirPods或AirPods Pro充电状态 (How to Know Your AirPods or AirPods Pro Charge Status)
When you flip open your AirPods case, you’ll see a status light in between the two AirPods. For the AirPods Pro and AirPods Wireless Charging Case, the status light is on the front of the case. Tap on the case to see the status.
翻转打开AirPods机壳时，您会在两个AirPods之间看到状态指示灯。 对于AirPods Pro和AirPods无线充电盒，状态灯在盒的前面。 点击案例以查看状态。
This light basically tells you what’s going on with your AirPods or AirPods Pro. Here’s what everything represents:
该指示灯基本上可以告诉您AirPods或AirPods Pro的状况。 一切代表以下内容：
Amber light (with AirPods attached): AirPods are charging.
琥珀色指示灯(已连接AirPods)： AirPods正在充电。
Amber light (without AirPods attached): Less than full charge remaining in AirPods case.
琥珀色指示灯(未连接AirPods)：电量不足，AirPods盒中的剩余电量仍然不足。
No light: Your AirPods are out of battery and need to be charged.
不亮：您的AirPods电池电量已耗尽，需要充电。
Flashing white light: AirPods are ready to connect.
白灯闪烁： AirPods已准备就绪，可以连接。
Flashing amber light: There’s a pairing error and AirPods might need to be reset.
琥珀色指示灯闪烁：出现配对错误，可能需要重置AirPods。
如何自定义您的AirPods或AirPods Pro (How to Customize Your AirPods or AirPods Pro)
Once you’ve paired, connected, and started using your AirPods, it’s time to customize them. On your iPhone or iPad, head to Settings > Bluetooth and tap the “i” button next to your AirPods.
配对，连接并开始使用AirPods之后，就可以自定义它们了。 在您的iPhone或iPad上，前往“设置”>“蓝牙”，然后点击AirPods旁边的“ i”按钮。
Here, first, tap the “Name” option to rename your AirPods.
在这里，首先，点击“名称”选项以重命名您的AirPods 。
Type in the new name and then tap the “Done” button found on the keyboard. Tap the “Back” button to go back to the AirPods menu.
输入新名称，然后点击键盘上的“完成”按钮。 点击“返回”按钮，返回到AirPods菜单。
Next, let’s customize the AirPods’ double-tap gesture. While the default option brings up Siri, you can replace it with Play/Pause, Next Track, Previous Track actions, or disable it altogether.
接下来，让我们自定义AirPods的双击手势。 当默认选项显示Siri时，您可以将其替换为播放/暂停，下一曲目，上一曲目动作，或者将其完全禁用。
Tap the “Left” or the “Right” option and then choose a new action from the menu.
点击“左”或“右”选项，然后从菜单中选择一个新动作。
If you’re using AirPods Pro, you’ll have a different set of options. The AirPods Pro doesn’t have an ear-tap feature. Instead, you squeeze the stem of the AirPod to invoke an action.
如果您使用的是AirPods Pro，将有不同的选项集。 AirPods Pro没有耳塞功能。 相反，您可以挤压AirPod的杆来调用动作。
Under the “Press And Hold AirPods” section, choose the “Left” or the “Right” option to customize it.
在“按住AirPods”部分下，选择“左”或“右”选项进行自定义。
From here, you can choose Noise Cancellation, Transparency mode, or you can turn the feature off altogether.
在这里，您可以选择“噪音消除”，“透明”模式，也可以完全关闭此功能。
If you don’t like the fact that AirPods automatically stop playback when you remove them from your ear, you can disable the feature by tapping on the toggle next to “Automatic Ear Detection.”
如果您不喜欢将AirPods从耳朵上移开后会自动停止播放的事实，则可以通过点击“自动耳朵检测”旁边的开关来禁用该功能。
如何将AirPods或AirPods Pro与Mac配对 (How to Pair AirPods or AirPods Pro with Mac)
If you’ve already paired your AirPods or AirPods Pro with your iPhone or iPad, they’ll automatically be paired with your Mac as well (as long as you’re using your iCloud account on all devices).
如果您已经将AirPods或AirPods Pro与iPhone或iPad配对，则它们也会自动与Mac配对(只要您在所有设备上都使用iCloud帐户)。
To connect to AirPods that are already paired, all you have to do is open the Bluetooth menu, select your AirPods, and then click the “Connect” option.
要连接已配对的AirPods，您要做的就是打开“蓝牙”菜单，选择您的AirPods，然后单击“连接”选项。
You can also pair AirPods directly to your Mac. To do this, go to System Preferences > Bluetooth. Here, make sure that Bluetooth is enabled and then press and hold the “Setup” button on your AirPods charging case.
您还可以将AirPods直接与Mac配对。 为此，请转到系统偏好设置>蓝牙。 在这里，请确保已启用蓝牙，然后按住AirPods充电盒上的“设置”按钮。
After a couple of seconds, you’ll see your AirPods in the Devices list. Here, simply click the “Connect” button.
几秒钟后，您将在“设备”列表中看到AirPods。 在这里，只需单击“连接”按钮。
You can now connect or disconnect your AirPods from the Bluetooth menu.
现在，您可以从蓝牙菜单连接或断开AirPods的连接。
如何在Apple Watch上使用AirPods或AirPods Pro (How to Use AirPods or AirPods Pro with Apple Watch)
If you’ve paired your AirPods with your iPhone, they’ll be paired to your Apple Watch as well.
如果您已将AirPods与iPhone配对，它们也将与Apple Watch配对。
To use AirPods or AirPods Pro directly with your Apple Watch, go to the wearable’s Control Center, tap the “AirPlay” button, and choose your AirPods.
若要直接在Apple Watch上使用AirPods或AirPods Pro，请转到可穿戴设备的控制中心，点击“ AirPlay”按钮，然后选择您的AirPods。
You can also bypass your iPhone and pair your AirPods directly to your Apple Watch from the Settings app.
您还可以绕过iPhone，并通过“设置”应用程序将AirPods直接与Apple Watch配对。
如何查找丢失的AirPods或AirPods Pro (How to Find Lost AirPods or AirPods Pro)
Apple’s Find My AirPods tool is directly integrated into the new Find My app on the iPhone. As long as you’re using the Find My iPhone feature, you can use it to track your lost AirPods, too (from the Find My app or from the iCloud website).
Apple的“查找我的AirPods”工具直接集成到iPhone上新的“查找我的”应用程序中。 只要您使用“查找我的iPhone”功能，就可以使用它来跟踪丢失的AirPods(通过“查找我的应用程序”或iCloud网站)。
To find your lost AirPods or AirPods Pro, open the “Find My” app and choose your AirPods.
要查找丢失的AirPods或AirPods Pro，请打开“查找我”应用并选择您的AirPods。
From here, you can see the last location where they were connected. If you see a green dot, it means your AirPods are online. A gray dot means that they are offline. Either they are out of range or the battery has died.
从这里，您可以看到它们连接的最后位置。 如果您看到一个绿点，则表明您的AirPods处于在线状态。 灰色点表示它们已脱机。 它们超出范围或电池已耗尽。
If you see a green dot, you can play a sound to look for the AirPods nearby. If you can see the last location, tap the “Directions” button to navigate to it.
如果看到绿点，则可以播放声音以寻找附近的AirPods。 如果您可以看到最后一个位置，请点击“方向”按钮导航到该位置。
如何在iPhone或iPad上手动连接到AirPods或AirPods Pro (How to Manually Connect to AirPods or AirPods Pro on iPhone or iPad)
AirPods are supposed to work magically. You put them in your ear, and they’re automatically paired with your iPhone or iPad (whichever is your most recently used device).
AirPods应该可以神奇地工作。 将它们放在耳边，它们会自动与您的iPhone或iPad(无论是最近使用的设备)配对。
But sometimes, it just doesn’t work. In times like these, when your AirPods or AirPods Pro are already in your ears and the case is back in your pocket, you can use the Control Center.
但是有时候，它只是行不通的。 在这种情况下，当您的AirPods或AirPods Pro已经在您的耳朵中并且手提箱放回口袋时，您可以使用Control Center。
Here, tap the “AirPlay” shortcut from the Now Playing control.
在这里，点击“正在播放”控件中的“ AirPlay”快捷方式。
From here, choose your AirPods to switch to them.
从这里，选择您的AirPods来切换到它们。
You can do this from the AirPlay menu from anywhere in the operating system, such as from the lock screen widget or the Music app.
您可以从操作系统中任何位置的AirPlay菜单中执行此操作，例如从锁屏小部件或“音乐”应用程序中执行。
如何检查AirPods或AirPods Pro电池寿命 (How to Check AirPods or AirPods Pro Battery Life)
You can check your AirPods battery life from your Apple devices in a couple of ways.
您可以通过两种方法从Apple设备检查AirPods电池寿命。
The easiest way is to bring up Siri and asking the virtual assistant something like, “AirPods battery?” and having it read out to you.
最简单的方法是打开Siri并询问虚拟助手，例如“ AirPods电池？” 并向您朗读。
You can also add the Batteries widget to the Today View on iPhone or iPad. From the Today View (swipe paste the left-most Home screen), scroll to the bottom of the list, and then tap the “Edit” button.
您还可以将“电池”小部件添加到iPhone或iPad上的“今日视图”。 在“今日视图”中(滑动粘贴最左侧的主屏幕)，滚动到列表的底部，然后点击“编辑”按钮。
From there, tap the “+” button next to the “Batteries” option to enable the widget.
从那里，点击“电池”选项旁边的“ +”按钮以启用小部件。
Rearrange the widgets if you want, and then tap the “Done” button.
如果需要，可以重新排列小部件，然后点击“完成”按钮。
Now, you’ll be able to see the battery life of your AirPods when they’re connected to your iPhone or iPad.
现在，当AirPods连接到iPhone或iPad时，您将可以看到它们的电池寿命。
如何一次使用两个AirPods或AirPods Pro (How to Use Two AirPods or AirPods Pro at Once)
If you’re running iOS 13 or iPadOS 13 and above, you can use two sets of AirPods or AirPods Pro with your iPhone or iPad at the same time.
如果您运行的是iOS 13或iPadOS 13及更高版本，则可以同时将两组AirPods或AirPods Pro与iPhone或iPad一起使用。
There are two ways to do this. The first method is fairly simple. All you have to do is pair the second set of AirPods to your iPhone or iPad following the same process as explained previously.
有两种方法可以做到这一点。 第一种方法相当简单。 您所要做的就是按照与前面所述相同的过程将第二组AirPods与iPhone或iPad配对。
From there, you’ll be able to select the second pair of AirPods from the AirPlay menu (found in Control Center) to start playback for both devices.
从那里，您将能够从AirPlay菜单(位于控制中心中)中选择第二对AirPods，以开始为这两个设备播放。
The second option doesn’t require you to pair the second set of AirPods. Using the new Audio Sharing feature in iOS 13.1 and iPadOS 13.1, you can share the audio to a friend’s AirPods via their iPhone or iPad.
第二个选项不需要您配对第二组AirPods。 使用iOS 13.1和iPadOS 13.1中新的音频共享功能，您可以通过朋友的iPhone或iPad将音频共享给他们的AirPods。
To do this, go to the AirPlay menu from the Control Center (or from the media app that you’re using) and tap the “Share Audio” button.
为此，请从控制中心(或您正在使用的媒体应用程序)转到AirPlay菜单，然后点击“共享音频”按钮。
Now, bring the other iPhone or iPad near your device (with the AirPods connected to them). Once you see their device, tap the “Share Audio” button.
现在，将另一部iPhone或iPad靠近您的设备(已连接AirPods)。 看到他们的设备后，请点击“共享音频”按钮。
Once the device is connected, tap the “checkmark” next to it to start playing audio on both devices.
连接设备后，请点击其旁边的“对勾”以开始在两个设备上播放音频。
如何更新AirPods或AirPods Pro固件 (How to Update AirPods or AirPods Pro Firmware)
To update your AirPods firmware, start by first connecting your AirPods to a power source and then pair them with your iPhone or iPad. As long as your device is nearby, it will automatically download and install any firmware updates in the background.
要更新AirPods固件，请首先将AirPods连接到电源，然后将其与iPhone或iPad配对。 只要您的设备在附近，它将自动在后台下载并安装任何固件更新。
Sadly, there is no interface or confirmation for this process. What you can do is check if your AirPods are running the latest firmware. But to do that, first, you have to check online for the latest firmware version.
可悲的是，此过程没有界面或确认。 您可以做的是检查AirPods是否正在运行最新的固件。 但是要做到这一点，首先，您必须在线检查最新的固件版本。
Next, go to Settings > General > About and select your AirPods. Here, take note of the firmware version to see if you have the latest version installed.
接下来，转到设置>常规>关于，然后选择您的AirPods。 在这里，记下固件版本以查看是否安装了最新版本。
Once you start using your AirPods regularly, you’ll notice that they tend to get dirty quite quickly. Here’s how to easily clean your icky AirPods.
一旦您开始定期使用AirPods，您会发现它们往往会很快变脏。 这是如何轻松清洁您讨厌的AirPods的方法。
翻译自: https://www.howtogeek.com/676744/how-to-use-your-airpods-and-airpods-pro-the-complete-guide/
airpods2使用
