配置链路聚合的目的：冗余、负载均衡

假如需要做链路聚合的2块网卡为eth1和eth2

man nmcli-examples

搜索模板Example 7(这是active/backup模式，一般round robin模式用的最多。)

$ nmcli con add type team con-name Team1 ifname Team1 config team1-master-json.conf

$ nmcli con add type ethernet con-name Team1-slave1 ifname em1 master Team1

$ nmcli con add type ethernet con-name Team1-slave2 ifname em2 master Team1

man teamd. conf

搜索runner,找到这一行

"runner": {"name": "activebackup"},

逻辑网卡定义为Team1，输入以下命令即可：

$ nmcli con add type team con-name Team1 ifname Team1 config '{"runner": {"name": "activebackup"}}'

$ nmcli con add type ethernet con-name Team1-slave1 ifname eth1 master Team1

$ nmcli con add type ethernet con-name Team1-slave2 ifname eth2 master Team1

接下来为Team1添加IP配置即可。

标签：聚合,name,nmcli,Team1,centos7,add,链路,ifname,con

来源： https://www.cnblogs.com/ValyrianSteel/p/12745229.html