浅谈安科瑞智能照明系统在马来西亚国家石油公司项目的应用

摘要:随着社会经济的发展及网络技术、通信技术的提高,人们对照明设计提出了新的要求,它不仅要控制照明光源的发光时间、 亮度,而且与其它系统来配合不同的应用场合做出相应的灯光场景。本文介绍了马亚西亚石油公司智能照明项目的应用。

Abstract: With the development of economy and the improvement of network and communication technology, we propose new requirements for lighting design. It not only need to control the luminous time and lighting brightness , but also makes lighting scene with other systems in different applications. This article introduces the application of smart lighting control system of Malaysia Petroliam Nasional Bhd project.

关键字:智能照明系统;节能减排;照明控制;

Keywords: smart lighting system, energy saving, lighting control

0.项目概述

Project overview

马亚西亚国家石油公司位于首都吉隆坡,本次项目主要做该公司新建办公室智能照明控制,并用后来软件实现集中控制。

Malaysia Petroliam Nasional Bhd is located in the capital Kuala Lumpur. This project mainly deals with the smart lighting control of the office building, and realizes central control by a background system.

1.系统介绍

System introduction

Based on KNX bus technology, Acrel-BUS smart lighting control system originates from Europe and develops from the three bus control technologies for residences and buildings including EIB, Batibus and EHS, of which EIB (European Installation Bus) is the agent technology. It uses the dual-core shielded twisted pair as the bus cable to connect all control modules for system control.

The system can integrate various independent control functions and combine many advantages including comfort, flexibility, safety, energy conservation, economy, easy maintenance into one system. It is mainly used for the control areas of large pubic construction projects including residences and buildings.

2.国家石油公司照明系统图

Lighting system diagram of Petroliam Nasional Bhd office building

3.系统功能

System function

Manual control: smart panels and touchscreens installed in all areas can realize real time control of light on/off and brightness according to actual needs.

Auto control: sensors of different functions (e.g. illuminance transducers and human motion sensors) can realize automatic control of light based on external environment.

Scenario control: different scenarios can be preset for switching between them.

Time control: the system will automatically complete the light control according to the preset operation time to ensure minimum energy consumption in idle period.

Central control: for all controls, real time monitoring and effective control of the entire lighting area can be realized. It facilitates the control modes and saves labor and power.

Status feedback: the system can give feedback on the on/off function of lighting fixtures on the site.

System linkage: the lighting system can form system linkage with the property management system, the building automation system and the security &fire system.

4.系统界面

System screen

安科瑞智能照明监控系统针对国家石油公司公共照明区域进行智能控制。

智能照明公共照明控制界面见下图,主要实现公共照明控制,可统一控制,也可单独控制,控制状态可在界面上直接显示出来,同时可以设置各照明回路自动亮灭时间。

Acrel smart lighting system controls the public lighting area of Petroliam Nasional Bhd.

The lighting control system is shown in the figure below, mainly realizes public lighting control, which can be controlled centralize or independently. The control status can be directly displayed on the touch screen, and the automatically set the lighting circuits on-off time.

Smart lighting interface 1

Smart lighting interface 2

定时智能照明控制主界面见下图,特定区域根据时间段控制来自动控制公共区域的照明的通断。

The main interface of smart lighting control system is shown in the figure below. Special areas can automatically control the lighting on and off of public areas according to time period control.

定时控制界面示意图一

Timely control screen one

定时控制界面示意图二

Timely control screen two

5.系统结构 

System structure

依据国家石油公司照明情况分布情况,系统包括:站控管理层、现场设备层。系统网络结构如图所示:

According to the lighting distribution of Petroliam Nasional Bhd, the system includes: station control management layer and field equipment layer. The system network structure is shown as belows.

6.智能照明模块描述

Description of smart lighting control module:

The above is the structural typology diagram of Acrel-bus smart lighting control system. The system architecture adopts layered structure, advantageous mainly in the following three aspects:

1、Enhancing system reliability. As each area and each line is distributed with KNX power, the electric isolation enables other parts to continue with operation when something goes wrong with one part of the system.

2、The data communication within one line or one area will not affect communication in other areas.

3、During system commissioning and maintenance, a clear system structure will provides high maintenance efficiency .

Common Product Models

6.1Power module

Function description:

A standard power supply for the KNX/EIB system, coupling bus signals and monitoring currents in KNX/EIB systems. Besides, the power supply of this series provides an auxiliary DC voltage of 30V for the power supply of other peripheral equipment (e.g. touchscreens, IP gateways). The module can supply power to a maximum of 64 pieces of equipment with bus reset, overcurrent indication and short circuit protection.

6.2 Switch drive

Function description:

The switch drive is a drive used for switch control of equipment. It supports KNX bus protocol and has functions including logic, delay, preset, scenario and threshold switching.

6.3 0-10V dimming drive

Function description:

The 0-10V dimming module supports KNX bus protocol and is used to control dimming circuits. It has soft on/off functions. Each circuit can be called by 8 scenarios simultaneously to check circuit status. It is especially suitable for the dimming of incandescent lamps, LED lights and low voltage halogen lamps. It also has functions including on/off, scenario and status feedback.

6.4 SCR dimming module

Function description:

The SCR dimming module supports KNX bus protocol. As a dimming module, it cannot only control the connection and disconnection of the load through direct control of the connection and disconnection of input power, but also adjust input voltage by phase control to realize LED dimming. 

6.5Human motion and illuminance sensor

Function description:

The smart lighting sensor supports KNX bus protocol. It can sense external signals and physical conditions (such as light, infrared and microwave) and transmit the sensed information to other KNX modules (such as dimmers, switch drives) to realize its functions. It is mainly used for places in need of automatic control in the smart lighting control system including public passages, lobbies and garages.

6.6 Smart panel

The smart panel supports KNX bus protocol. It is used to receive the signals triggered by button press. It can realize on/off, dimming, scenario, curtain control, temperature adjustment, alarm function through the combination of short or long press and different parameter configuration.
Function description:

6.7 Dry contact input module

Function description:

The dry contact signal input module supports KNX bus protocol. It is used to receive external dry contact signal input. It can realize functions through different parameter configuration including on/off, dimming, scenario, curtain control, data transmission, count, temperature adjustment and alarm.

7.智能照明系统的意义

The meaning of smart lighting control system

  现代化的发展,越来越多的建筑已经使用上智能照明系统,智能照明系统不仅仅在功能上给予人们不一样的体验,更加适合人们的工作使用。现代的建筑大都使用了智能照明系统,比起老式的照明方式,现代化的智能照明系统更加的受欢迎;智能照明系统在建筑中的节能方式,通过加强管理节约成本、合理利于自然光源、照明系统资源共享等方式来实现资源的节约。智能照明系统的优点和实用性有很多,同时智能照明系统也在不断地发展完善,未来建筑将会全方面的使用智能照明系统来控制照明。

Nowadays with the development of modernization, more and more buildings have already used smart lighting system. Most modern office buildings use smart lighting system, which is more popular than the old-fashioned lighting system. The energy saving method of smart lighting system in the building can realize resource saving by strengthening management and cost saving, effectively benefiting natural light source and lighting system resource sharing. There are many advantages and practicability of smart lighting system, and smart lighting system is also developing and improving constantly. In the future, most building will use smart lighting system for lighting control.

安科瑞 缪阳扬

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处:http://www.mzph.cn/news/163473.shtml

如若内容造成侵权/违法违规/事实不符,请联系多彩编程网进行投诉反馈email:809451989@qq.com,一经查实,立即删除!

相关文章

tp8 使用rabbitMQ(2)工作队列

代码的参数说明在 第一小节的代码中,如果需要可移步到第一节中查看 工作队列 工作队列(又称:任务队列——Task Queues)是为了避免等待一些占用大量资源、时间的操作。当我们把任务(Task)当作消息发送到队列…

推荐一款png图片打包plist工具pngPackerGUI_V2.0

png图片打包plist工具,手把手教你使用pngPackerGUI_V2.0 此软件是在pngpacker_V1.1软件基础之后,开发的界面化操作软件,方便不太懂命令行的小白快捷上手使用。1.下载并解压缩软件,得到如下目录,双击打开 pngPackerGUI.…

使用paddleocr进行OCR文字识别

1 OCR介绍 OCR(Optical Character Recognition)即光学字符识别,是一种将不同类型的文档(如扫描的纸质文件、PDF文件或图像文件中的文本)转换成可编辑和可搜索的数据的技术。OCR技术能够识别和转换印刷或手写文字&…

Python接口自动化测试——如何搭建测试环境

前言 接口测试的方式有很多,比如可以用工具(jmeter,postman)之类,也可以自己写代码进行接口测试,工具的使用相对来说都比较简单,重点是要搞清楚项目接口的协议是什么,然后有针对性的进行选择&a…

NF是哪个国家品牌?韩国NF-耐福功放芯片介绍

NF是韩国一家专注于数字音频芯片领域公司旗下的数字功放IC品牌,2008年开始进入中国市场,ISweek工采网作为其代理商;在国内简称:韩国NF,又被称耐福、耐福NTP功放芯片;国内长虹、TCL、海信、小豹AI音箱、腾讯…

SQL进阶学习

1.[NISACTF 2022]join-us sql报错注入和联合注入 过滤: as IF rand() LEFT by updatesubstring handler union floor benchmark COLUMN UPDATE & sys.schema_auto_increment_columns && 11 database case AND right CAST FLOOR left updatexml DATABA…

selenium 简单案例 <批量下载文件> <网页自动化点击上报>

一、批量下载文件 网页分析 点击跳转到下载页面 from selenium import webdriver import timedef get_link_list():# 创建浏览器对象driver webdriver.Chrome(executable_pathrC:\Users\nlp_1\Desktop\chromedriver\chromedriver-win32\chromedriver.exe)url https://www…

微信报名怎么做_轻松便捷的数字化报名体验

微信报名:轻松便捷的数字化报名体验 在这个数字化时代,微信已经成为我们生活中不可或缺的一部分。它不仅仅是一个社交平台,更是一个功能强大的综合性工具。其中,微信报名功能更是给我们的生活带来了极大的便利。本文将详细介绍微…

Django之cookie和session

文章目录 Cookie的介绍Cookie的由来什么是CookieCookie原理Cookie覆盖浏览器查看Cookie 在Django中操作Cookie设置Cookie查询浏览器携带的Cookie删除Cookie Cookie校验登录sessionSession的由来Session设置查看、更新Session值删除Session值Seesion的其他方法Session的其他配置…

扩展外部eMMC存储

By Toradex胡珊逢 简介 存储器的嵌入式设备中扮演着重要角色,上面不仅安装有操作系统,同时也保存着应用程序和运行日志等。对于存储器如 eMMC,写入的数据量决定其使用寿命,对于有大量日志记录的应用,通常可以选用一个…

cefsharp119.4.30(cef119.4.3,Chromium119.0.6045.159)版本升级体验支持H264及其他多个H264版本

Cefsharp119.4.30,cef119.4.3,Chromium119.0.6045.159 此更新包括一个高优先级安全更新 This update includes a high priority security update. 说明:此版本119.4.3支持H264视频播放(需要联系我),其他版本。.NETFramework 4.6.2 NuGet Gallery | CefSharp.WinForms 119.…

运动规划Motion-Planning随笔

online verification技术 实时安全校验技术:留一手 首先计算能否通过刹车这种方式得到一条安全轨迹,(让速不让道),当刹车有可能碰撞到行人或其他车辆时,则判断变道是否会产生碰撞。如果能变道&#xff0…

「 系统设计 」 为什么要做架构分层?

「 系统设计 」 为什么要做架构分层? 参考&鸣谢 3.设计模式之分层思维:为什么要做代码分层架构? 从零开始学架构(八)分层架构和设计模式 架构模式之分层架构总结 文章目录 「 系统设计 」 为什么要做架构分层&…

IT支持团队的绩效指标和最佳实践

一名员工在远程时因笔记本问题寻求IT支持,尽管他们多次尝试排除故障,但由于缺乏专业知识,最终还是无法访问工作所需的应用程序。这时,他们需要一名专业的 IT 技术人员来指导他们,但他们只能等待有人注意到并回应他们的…

海报设计必备:揭秘5款炙手可热的设计工具

1.即时设计:能实现在线协作的海报设计软件 即时设计作为 2020 年上线的国产设计工具,目前已经有了超百万的注册用户,获得了广大设计师的一致好评。与其他传统海报设计软件相比,即时设计具有这几个优点:一是所有功能都…

Chrome 访问不了项目?10080端口 ERR_UNSAFE_PORT:问题原因 / 解决方案

文章目录 被禁用端口列表解决方法方法一、更换端口 / 使用代理 / 使用域名方法二、对浏览器下手WindowsMac 最近有客户反馈,在chrome浏览器中访问不了项目,其他浏览器都是正常的。 ?奇了怪了,难道客户对chrome做了什么操作&#x…

Docker | Docker入门安装

✅作者简介:大家好,我是Leo,热爱Java后端开发者,一个想要与大家共同进步的男人😉😉 🍎个人主页:Leo的博客 💞当前专栏:Docker系列 ✨特色专栏: My…

探索WebStorm 2023 Mac/win:最强大的JavaScript开发工具

在当今的软件开发领域,JavaScript已经成为了一种不可或缺的编程语言。而在众多的JavaScript开发工具中,WebStorm一直以其强大的功能和友好的用户界面脱颖而出。现在,我们迎来了全新的WebStorm 2023版本,它将带给开发者们更加出色的…

华中科技大学李松课题组,利用机器学习预测多孔材料水吸附等温线

多孔材料的水吸附等温线是一个非常重要的参数,但这一参数的获得并不容易。这是因为多孔材料种类过多、结构多元,通过实验和计算的方式获得水吸附等温线数据成本过高,耗时过长。 华中科技大学的李松课题组,建立了一个两步机器学习模…

可以在uni-app使用的类vconsole.js插件

兴致勃勃在uni-app项目引入调试工具vconsole.js结果真机调试页面空白 怎么办?! 别着急 paradox老师有方法 替代插件下载地址:直接下载插件并引入HbuilderXuni_modules插件 - 类Vconsole APP端调试工具 - HF调试器 - DCloud 插件市场 下载完成在main.js中引入&…