传统的RNN模型简介

RNN

先上图

这图看起来莫名其妙，想拿着跟CNN对比着学第一眼看上去有点摸不着头脑，其实我们可以把每一个时刻的图展开来，如下

其中，为了简化计算，我们默认每一个隐层参数相同，这样看来RNN的结构就比较简单了，相比较CNN来说，RNN引入了更多的时序信息。

LSTM

在训练 RNN 时，每个时间步的输出都依赖于之前时间步的状态，这种依赖关系形成了一个链式结构。当反向传播时，梯度需要通过多个时间步传播回去，由于链式法则的存在，这个过程中梯度会多次进行乘法运算。如果这些乘法运算的结果小于1，梯度就会随着时间步的增加逐渐衰减，最终可能消失到几乎为零，就会导致梯度消失。RNN 中常用的激活函数如 Sigmoid 或者 tanh 函数，它们的输出范围都在 (0, 1) 或者 (-1, 1) 之间。在反向传播时，如果梯度在这些函数的导数范围内，则可以稳定地传播；但如果超出了这个范围，梯度可能会指数级增长或减少，导致梯度爆炸。而且这些在处理长序列时特别容易发生，因此，出现了RNN的改良版，LSTM。

先看图：

谈到LSTM就无法避免的提及它的三个门和最上面的记忆单元

1. 记忆单元：记忆单元是LSTM的核心，用于存储信息。它可以看作是一条信息通道，贯穿整个 LSTM单元链条，允许信息直接传递，减少信息丢失。

2. 遗忘门：遗忘门决定哪些信息需要从记忆单元中删除。它通过sigmoid函数（将当前输入和前一时刻的隐藏状态作为输入）输出一个0到1之间的值。接近0的值表示需要遗忘的信息，接近1的值表示需要保留的信息。

   $$f_t=\sigma (W_f\cdot [h_{t-1},x_t]+b_f)$$

3. 输入门： 输入门决定哪些新的信息需要添加到记忆单元中。它由两个部分组成：一个sigmoid层决定哪些值将被更新；一个tanh层生成新的候选值向量。

   $$i_t=\sigma (W_i\cdot [h_{t-1},x_t]+b_i)$$

   $${\tilde{C}}_t=\tanh (W_C\cdot [h_{t-1},x_t]+b_C)$$

4. 输出门：输出门决定记忆单元的哪些部分将被输出作为当前时刻的隐藏状态。它通过sigmoid层和tanh层来实现。

   $$o_t=\sigma (W_o\cdot [h_{t-1},x_t]+b_o)$$

   $$h_t=o_t\ast \tanh (C_t)$$
   LSTM的工作流程如下

5. 遗忘阶段：计算遗忘门的值，以确定当前记忆单元状态中需要遗忘的部分。
   $$C_t=f_t\ast C_{t-1}$$

6. 输入阶段：计算输入门的值，并生成新的候选记忆内容。
   $$C_t=C_t+i_t\ast {\tilde{C}}_t$$

7. 更新记忆单元：结合遗忘门和输入门的输出，更新当前记忆单元的状态。

8. 输出阶段：计算输出门的值，并生成新的隐藏状态。
   完整公式流程：

$$f_t=\sigma (W_f\cdot [h_{t-1},x_t]+b_f)$$

$$i_t=\sigma (W_i\cdot [h_{t-1},x_t]+b_i)$$

$${\tilde{C}}_t=\tanh (W_C\cdot [h_{t-1},x_t]+b_C)$$

$$C_t=f_t\ast C_{t-1}+i_t\ast {\tilde{C}}_t$$

$$o_t=\sigma (W_o\cdot [h_{t-1},x_t]+b_o)$$

$$h_t=o_t\ast \tanh (C_t)$$

GRU

LSTM固然很强，解决了RNN对于长序列模型表现很拉跨的难题，但是仔细查看LSTM的过程就会发现，相对于RNN来说他引入了太多的参数，很容易就过拟合和训练时间大大加长，因此，GRU改进这一问题

1. 更新门：更新门控制着前一时间步的信息和当前时间步的新信息之间的混合。它通过sigmoid函数决定有多少过去的信息需要保留，以及有多少新的信息需要添加。

   $$z_t=\sigma (W_z\cdot [h_{t-1},x_t]+b_z)$$

2. 重置门：重置门控制着前一时间步的隐藏状态在当前时间步中被遗忘的比例。它通过sigmoid函数决定有多少前一时间步的信息需要被重置。

   $$r_t=\sigma (W_r\cdot [h_{t-1},x_t]+b_r)$$

3. 候选隐藏状态：候选隐藏状态结合了重置门的结果，决定当前时间步的隐藏状态。

   $${\tilde{h}}_t=\tanh (W\cdot [r_t\ast h_{t-1},x_t]+b)$$

4. 隐藏状态：最终的隐藏状态是更新门和候选隐藏状态的组合。

   $$h_t=(1-z_t)\ast h_{t-1}+z_t\ast {\tilde{h}}_t$$

工作流程如下：

1. 重置阶段：计算重置门的值，以确定前一时间步的信息在当前时间步中被重置的比例。

   $$r_t=\sigma (W_r\cdot [h_{t-1},x_t]+b_r)$$

2. 更新阶段：计算更新门的值，以确定有多少信息从前一时间步保留到当前时间步。

   $$z_t=\sigma (W_z\cdot [h_{t-1},x_t]+b_z)$$

3. 候选隐藏状态阶段：计算候选隐藏状态，该状态结合了重置门的结果和当前输入信息。

   $${\tilde{h}}_t=\tanh (W\cdot [r_t\ast h_{t-1},x_t]+b)$$

4. 隐藏状态更新阶段：结合更新门和候选隐藏状态，更新当前时间步的隐藏状态。

   $$h_t=(1-z_t)\ast h_{t-1}+z_t\ast {\tilde{h}}_t$$

   完整工作流程

   $$z_t=\sigma (W_z\cdot [h_{t-1},x_t]+b_z)$$

   $$r_t=\sigma (W_r\cdot [h_{t-1},x_t]+b_r)$$

   $${\tilde{h}}_t=\tanh (W\cdot [r_t\ast h_{t-1},x_t]+b)$$

   $$h_t=(1-z_t)\ast h_{t-1}+z_t\ast {\tilde{h}}_t$$

使用传统RNN模型来进行人名分类

1. 准备工作

1. 要用到的数据集点此下载https://download.pytorch.org/tutorial/data.zip，备用地址，点击下载https://www.123pan.com/s/vgXtjv-BFU3v.html

2. 导入一些包和写一个读取数据的函数（这段代码不是重点，直接抄就行了，只需要记住几个关键的变量）

   category_lines: 人名类别与具体人名对应关系的字典，形式为{人名类别:[人名1，人名2，...]}
   all_categories：所有的类别构成的列表
   all_letters：所有的字符
   

   import torch
   from io import open
   import glob
   import os
   import unicodedata
   import string
   import random
   import time
   import math
   import torch.nn as nn
   import matplotlib.pyplot as pltdata_path = './data/names/'
   all_letters = string.ascii_letters + " .,;'"
   def unicodeToAscii(text):"""Converts a Unicode string to an ASCII string.Args:text (str): The Unicode string to convert.Returns:str: The ASCII string."""return ''.join([unicodedata.normalize('NFKD', char)for char in textif not unicodedata.combining(char)]).encode('ascii', 'ignore').decode('ascii')def readLines(filename):lines = open(filename, encoding='utf-8').read().strip().split('\n')return [unicodeToAscii(line) for line in lines]# 构建一个人名类别与具体人名对应关系的字典
   category_lines = {}# 构建所有类别的列表
   all_categories = []# 遍历所有的文件，使用glob.glob中可以利用正则表达式遍历
   for filename in glob.glob(data_path + '*.txt'):category = os.path.splitext(os.path.basename(filename))[0]all_categories.append(category)lines = readLines(filename)# 将类别与人名对应关系存储到字典中category_lines[category] = lines# 测试
   print(category_lines['Italian'][:5])
   

3. 字符无法直接被网络识别，因此要将其编码，这里使用最简单的one-hot编码，实现一个函数lineToTensor(line)，将输入的名字编码成张量

   def lineToTensor(line):# 首先初始化一个全0的张量，大小为len(line) * 1 * n_letters# 代表人名每个字母都用一个(1 * n_letters)的one-hot向量表示tensor = torch.zeros(len(line), 1, len(all_letters))# 遍历人名的每个字母, 并搜索其在所有字母中的位置，将其对应的位置置为1for li, letter in enumerate(line):tensor[li][0][all_letters.find(letter)] = 1return tensor
   # 测试
   line = "Bai"
   tensor = lineToTensor(line)
   print("line_tensor:", tensor)
   print("line_tensor_size:", tensor.size())
   

2. 模型搭建

1. 搭建RNN模型

   class RNN(nn.Module):def __init__(self, input_size, hidden_size, output_size, num_layers=1):super(RNN, self).__init__()# input_size: 输入数据的特征维度# hidden_size: RNN隐藏层的最后一个维度# output_size: RNN网络最后线性层的输出维度# num_layers: RNN网络的层数self.input_size = input_sizeself.hidden_size = hidden_sizeself.output_size = output_sizeself.num_layers = num_layersself.rnn = nn.RNN(input_size, hidden_size, num_layers)self.linear = nn.Linear(hidden_size, output_size)self.softmax = nn.LogSoftmax(dim=-1)def forward(self, input1, hidden):# input: 人名分类器中的输入张量，形状是1*n_letters# hidden: 代表隐藏层张量，形状是self.num_layers*1*hidden_size# 输入到RNN中的张量要求是三维张量，所以需要用unsqueeze()函数扩充维度input1 = input1.unsqueeze(0)rr, hn = self.rnn(input1, hidden)# 将RNN中获得的结果通过线性层变换和softmax函数输出return self.softmax(self.linear(rr)), hndef initHidden(self):# 初始化隐藏层张量，全0张量，维度是3return torch.zeros(self.num_layers, 1, self.hidden_size)
   

2. 搭建LSTM模型

   class LSTM(nn.Module):def __init__(self, input_size, hidden_size, output_size, num_layers=1):super(LSTM, self).__init__()self.input_size = input_sizeself.hidden_size = hidden_sizeself.output_size = output_sizeself.num_layers = num_layersself.lstm = nn.LSTM(input_size, hidden_size, num_layers)self.linear = nn.Linear(hidden_size, output_size)self.softmax = nn.LogSoftmax(dim=-1)def forward(self, input1, hidden, c):# 注意：LSTM网络的输入有三个张量，不能忘记细胞状态Cinput1 = input1.unsqueeze(0)rr, (hn, cn) = self.lstm(input1, (hidden, c))return self.softmax(self.linear(rr)), hn, cndef initHiddenAndC(self):c = hidden = torch.zeros(self.num_layers, 1, self.hidden_size)return hidden, c
   

3. 搭建GRU模型

   class GRU(nn.Module):def __init__(self, input_size, hidden_size, output_size, num_layers=1):super(GRU, self).__init__()self.input_size = input_sizeself.hidden_size = hidden_sizeself.output_size = output_sizeself.num_layers = num_layersself.gru = nn.GRU(input_size, hidden_size, num_layers)self.linear = nn.Linear(hidden_size, output_size)self.softmax = nn.LogSoftmax(dim=-1)def forward(self, input1, hidden):input1 = input1.unsqueeze(0)rr, hn = self.gru(input1, hidden)return self.softmax(self.linear(rr)), hndef initHidden(self):return torch.zeros(self.num_layers, 1, self.hidden_size)
   

3. 模型的实例化与训练

1. 定义一些参数以及实例化模型

   # 参数
   input_size = len(all_letters)
   n_hidden = 128
   output_size = n_categories
   input1 = lineToTensor('B').squeeze(0)
   hidden = c = torch.zeros(1, 1, n_hidden)rnn = RNN(input_size, n_hidden, output_size)
   lstm = LSTM(input_size, n_hidden, output_size)
   gru = GRU(input_size, n_hidden, output_size)# 测试
   rnn_output, rnn_hidden = rnn(input1, hidden)
   lstm_output, lstm_hidden, next_c = lstm(input1, hidden, c)
   gru_output, gru_hidden = gru(input1, hidden)# 打印输出信息
   print("rnn_output:", rnn_output)
   print("rnn_shape:", rnn_output.shape)
   print("********************************")
   print("lstm_output:", lstm_output)
   print("lstm_shape:", lstm_output.shape)
   print("********************************")
   print("gru_output:", gru_output)
   print("gru_shape:", gru_output.shape)
   

2. categoryFromOutput(output)函数功能为从模型输出中获取最大值和最大值的索引

   def categoryFromOutput(output):# 从输出中获取最大值和最大值的索引top_n, top_i = output.topk(1)category_i = top_i[0].item()return all_categories[category_i], category_i
   

3. randomTrainingExample()函数功能为随机选训练所需的数据

   def randomTrainingExample():# 随机选择一个类别category = random.choice(all_categories)# 从该类别中随机选择一个人名line = random.choice(category_lines[category])# 将人名转换为张量category_tensor = torch.tensor([all_categories.index(category)], dtype=torch.long)line_tensor = lineToTensor(line)return category, line, category_tensor, line_tensor
   

4. 构建训练函数

   # 构建传统RNN训练函数
   criterion = nn.NLLLoss()
   learning_rate = 0.005
   def trainRNN(category_tensor, line_tensor):hidden = rnn.initHidden()rnn.zero_grad()output = Nonefor i in range(line_tensor.size()[0]):output, hidden = rnn(line_tensor[i], hidden)# rnn对象由nn.RNN实例化得到，最终输出得到的是三维张量，为了满足category_tensor的维度要求，需要将其转换为二维张量loss = criterion(output.squeeze(0), category_tensor)loss.backward()# 更新参数for p in rnn.parameters():p.data.add_(-learning_rate, p.grad.data)return output, loss.item()def trainLSTM(category_tensor, line_tensor):hidden, c = lstm.initHiddenAndC()lstm.zero_grad()output = Nonefor i in range(line_tensor.size()[0]):output, hidden, c = lstm(line_tensor[i], hidden, c)loss = criterion(output.squeeze(0), category_tensor)loss.backward()for p in lstm.parameters():p.data.add_(-learning_rate, p.grad.data)return output, loss.item()def trainGRU(category_tensor, line_tensor):hidden = gru.initHidden()gru.zero_grad()output = Nonefor i in range(line_tensor.size()[0]):output, hidden = gru(line_tensor[i], hidden)loss = criterion(output.squeeze(0), category_tensor)loss.backward()for p in gru.parameters():p.data.add_(-learning_rate, p.grad.data)return output, loss.item()
   

5. 绘图的辅助函数timeSince(since)用于记录代码运行时间

   # 构建时间计算函数
   def timeSince(since):now = time.time()s = now - sincem = math.floor(s / 60)s -= m * 60return "%dm %ds" % (m, s)
   

6. 构建完整的训练函数

   # 训练轮次
   n_iters = 1000
   # 每隔print_every打印一次信息
   print_every = 50
   # 每个plot_every作为一次绘图采样点
   plot_every = 10
   def train(train_type_fn):# 每个制图间隔损失保存列表all_losses = []# 获得开始的时间戳start = time.time()current_loss = 0for iter in range(1, n_iters + 1):category, line, category_tensor, line_tensor = randomTrainingExample()output, loss = train_type_fn(category_tensor, line_tensor)current_loss += lossif iter % print_every == 0:guess, guess_i = categoryFromOutput(output)correct = "✓" if guess == category else "✗ (%s)" % categoryprint("%d %d%% (%s) %.4f %s / %s %s" % (iter, iter / n_iters * 100, timeSince(start), loss, line, guess, correct))if iter % plot_every == 0:all_losses.append(current_loss / plot_every)current_loss = 0return all_losses, int(time.time() - start)
   

7. 训练并绘图

   # 训练并制作对比图
   all_losses1, period1 = train(trainRNN)
   all_losses2, period2 = train(trainLSTM)
   all_losses3, period3 = train(trainGRU)plt.figure(0)
   plt.plot(all_losses1, label='RNN')
   plt.plot(all_losses2, color='red', label='LSTM')
   plt.plot(all_losses3, color='green', label='GRU')
   plt.legend(loc='upper left')plt.figure(1)
   x_data = ['RNN', 'LSTM', 'GRU']
   y_data = [period1, period2, period3]
   plt.bar(range(len(x_data)), y_data, color='green', tick_label=x_data)
   

8. 为方便测试，训练轮次只设置了一千，图形跑出来看不是很清楚，以下为训练1e5次的效果

   

   

4. 构建评估函数和预测函数

1. 评估函数

   def evaluateRNN(line_tensor):output = Nonehidden = rnn.initHidden()for i in range(line_tensor.size()[0]):output, hidden = rnn(line_tensor[i], hidden)return output.squeeze(0)def evaluateLSTM(line_tensor):output = Nonehidden, c = lstm.initHiddenAndC()for i in range(line_tensor.size()[0]):output, hidden, c = lstm(line_tensor[i], hidden, c)return output.squeeze(0)def evaluateGRU(line_tensor):output = Nonehidden = gru.initHidden()for i in range(line_tensor.size()[0]):output, hidden = gru(line_tensor[i], hidden)return output.squeeze(0)
   

2. 预测函数

   def predict(input_line, evaluate, n_predictions=3):print("\n> %s" % input_line)with torch.no_grad():output = evaluate(lineToTensor(input_line))topv, topi = output.topk(n_predictions, 1, True)predictions = []for i in range(n_predictions):value = topv[0][i].item()category_index = topi[0][i].item()print("(%.2f) %s" % (value, all_categories[category_index]))predictions.append([value, all_categories[category_index]])# 测试
   for evaluate_fn in [evaluateRNN, evaluateLSTM, evaluateGRU]:predict('Dovesky', evaluate_fn)predict('Jackson', evaluate_fn)predict('Satoshi', evaluate_fn)

3. 完整代码版（方便复制来测试）

   import torch
   from io import open
   import glob
   import os
   import unicodedata
   import string
   import random
   import time
   import math
   import torch.nn as nn
   import matplotlib.pyplot as plt
   data_path = './data/names/'all_letters = string.ascii_letters + " .,;'"
   def unicodeToAscii(text):"""Converts a Unicode string to an ASCII string.Args:text (str): The Unicode string to convert.Returns:str: The ASCII string."""return ''.join([unicodedata.normalize('NFKD', char)for char in textif not unicodedata.combining(char)]).encode('ascii', 'ignore').decode('ascii')def readLines(filename):lines = open(filename, encoding='utf-8').read().strip().split('\n')return [unicodeToAscii(line) for line in lines]# 构建一个人名类别与具体人名对应关系的字典
   category_lines = {}# 构建所有类别的列表
   all_categories = []# 遍历所有的文件，使用glob.glob中可以利用正则表达式遍历
   for filename in glob.glob(data_path + '*.txt'):category = os.path.splitext(os.path.basename(filename))[0]all_categories.append(category)lines = readLines(filename)# 将类别与人名对应关系存储到字典中category_lines[category] = linesn_categories = len(all_categories)def lineToTensor(line):# 首先初始化一个全0的张量，大小为len(line) * 1 * n_letters# 代表人名每个字母都用一个(1 * n_letters)的one-hot向量表示tensor = torch.zeros(len(line), 1, len(all_letters))# 遍历人名的每个字母, 并搜索其在所有字母中的位置，将其对应的位置置为1for li, letter in enumerate(line):tensor[li][0][all_letters.find(letter)] = 1return tensorclass RNN(nn.Module):def __init__(self, input_size, hidden_size, output_size, num_layers=1):super(RNN, self).__init__()# input_size: 输入数据的特征维度# hidden_size: RNN隐藏层的最后一个维度# output_size: RNN网络最后线性层的输出维度# num_layers: RNN网络的层数self.input_size = input_sizeself.hidden_size = hidden_sizeself.output_size = output_sizeself.num_layers = num_layersself.rnn = nn.RNN(input_size, hidden_size, num_layers)self.linear = nn.Linear(hidden_size, output_size)self.softmax = nn.LogSoftmax(dim=-1)def forward(self, input1, hidden):# input: 人名分类器中的输入张量，形状是1*n_letters# hidden: 代表隐藏层张量，形状是self.num_layers*1*hidden_size# 输入到RNN中的张量要求是三维张量，所以需要用unsqueeze()函数扩充维度input1 = input1.unsqueeze(0)rr, hn = self.rnn(input1, hidden)# 将RNN中获得的结果通过线性层变换和softmax函数输出return self.softmax(self.linear(rr)), hndef initHidden(self):# 初始化隐藏层张量，全0张量，维度是3return torch.zeros(self.num_layers, 1, self.hidden_size)class LSTM(nn.Module):def __init__(self, input_size, hidden_size, output_size, num_layers=1):super(LSTM, self).__init__()self.input_size = input_sizeself.hidden_size = hidden_sizeself.output_size = output_sizeself.num_layers = num_layersself.lstm = nn.LSTM(input_size, hidden_size, num_layers)self.linear = nn.Linear(hidden_size, output_size)self.softmax = nn.LogSoftmax(dim=-1)def forward(self, input1, hidden, c):# 注意：LSTM网络的输入有三个张量，不能忘记细胞状态Cinput1 = input1.unsqueeze(0)rr, (hn, cn) = self.lstm(input1, (hidden, c))return self.softmax(self.linear(rr)), hn, cndef initHiddenAndC(self):c = hidden = torch.zeros(self.num_layers, 1, self.hidden_size)return hidden, cclass GRU(nn.Module):def __init__(self, input_size, hidden_size, output_size, num_layers=1):super(GRU, self).__init__()self.input_size = input_sizeself.hidden_size = hidden_sizeself.output_size = output_sizeself.num_layers = num_layersself.gru = nn.GRU(input_size, hidden_size, num_layers)self.linear = nn.Linear(hidden_size, output_size)self.softmax = nn.LogSoftmax(dim=-1)def forward(self, input1, hidden):input1 = input1.unsqueeze(0)rr, hn = self.gru(input1, hidden)return self.softmax(self.linear(rr)), hndef initHidden(self):return torch.zeros(self.num_layers, 1, self.hidden_size)# 参数
   input_size = len(all_letters)
   n_hidden = 128
   output_size = n_categories
   hidden = c = torch.zeros(1, 1, n_hidden)rnn = RNN(input_size, n_hidden, output_size)
   lstm = LSTM(input_size, n_hidden, output_size)
   gru = GRU(input_size, n_hidden, output_size)def categoryFromOutput(output):# 从输出中获取最大值和最大值的索引top_n, top_i = output.topk(1)category_i = top_i[0].item()return all_categories[category_i], category_i# category, category_i = categoryFromOutput(rnn_output)
   # print("category:", category)
   # print("category_i:", category_i)def randomTrainingExample():# 随机选择一个类别category = random.choice(all_categories)# 从该类别中随机选择一个人名line = random.choice(category_lines[category])# 将人名转换为张量category_tensor = torch.tensor([all_categories.index(category)], dtype=torch.long)line_tensor = lineToTensor(line)return category, line, category_tensor, line_tensor# 构建传统RNN训练函数
   criterion = nn.NLLLoss()
   learning_rate = 0.005
   def trainRNN(category_tensor, line_tensor):hidden = rnn.initHidden()rnn.zero_grad()output = Nonefor i in range(line_tensor.size()[0]):output, hidden = rnn(line_tensor[i], hidden)# rnn对象由nn.RNN实例化得到，最终输出得到的是三维张量，为了满足category_tensor的维度要求，需要将其转换为二维张量loss = criterion(output.squeeze(0), category_tensor)loss.backward()# 更新参数for p in rnn.parameters():p.data.add_(-learning_rate, p.grad.data)return output, loss.item()def trainLSTM(category_tensor, line_tensor):hidden, c = lstm.initHiddenAndC()lstm.zero_grad()output = Nonefor i in range(line_tensor.size()[0]):output, hidden, c = lstm(line_tensor[i], hidden, c)loss = criterion(output.squeeze(0), category_tensor)loss.backward()for p in lstm.parameters():p.data.add_(-learning_rate, p.grad.data)return output, loss.item()def trainGRU(category_tensor, line_tensor):hidden = gru.initHidden()gru.zero_grad()output = Nonefor i in range(line_tensor.size()[0]):output, hidden = gru(line_tensor[i], hidden)loss = criterion(output.squeeze(0), category_tensor)loss.backward()for p in gru.parameters():p.data.add_(-learning_rate, p.grad.data)return output, loss.item()# 构建时间计算函数
   def timeSince(since):now = time.time()s = now - sincem = math.floor(s / 60)s -= m * 60return "%dm %ds" % (m, s)# 完整的训练函数
   device = torch.device("cuda" if torch.cuda.is_available() else "cpu")
   n_iters = 1000
   print_every = 50
   plot_every = 10
   def train(train_type_fn):# 每个制图间隔损失保存列表all_losses = []# 获得开始的时间戳start = time.time()current_loss = 0for iter in range(1, n_iters + 1):category, line, category_tensor, line_tensor = randomTrainingExample()output, loss = train_type_fn(category_tensor, line_tensor)current_loss += lossif iter % print_every == 0:guess, guess_i = categoryFromOutput(output)correct = "✓" if guess == category else "✗ (%s)" % categoryprint("%d %d%% (%s) %.4f %s / %s %s" % (iter, iter / n_iters * 100, timeSince(start), loss, line, guess, correct))if iter % plot_every == 0:all_losses.append(current_loss / plot_every)current_loss = 0return all_losses, int(time.time() - start)# 训练并制作对比图
   all_losses1, period1 = train(trainRNN)
   all_losses2, period2 = train(trainLSTM)
   all_losses3, period3 = train(trainGRU)plt.figure(0)
   plt.plot(all_losses1, label='RNN')
   plt.plot(all_losses2, color='red', label='LSTM')
   plt.plot(all_losses3, color='green', label='GRU')
   plt.legend(loc='upper left')plt.figure(1)
   x_data = ['RNN', 'LSTM', 'GRU']
   y_data = [period1, period2, period3]
   plt.bar(range(len(x_data)), y_data, color='green', tick_label=x_data)# 构建评估函数
   def evaluateRNN(line_tensor):output = Nonehidden = rnn.initHidden()for i in range(line_tensor.size()[0]):output, hidden = rnn(line_tensor[i], hidden)return output.squeeze(0)def evaluateLSTM(line_tensor):output = Nonehidden, c = lstm.initHiddenAndC()for i in range(line_tensor.size()[0]):output, hidden, c = lstm(line_tensor[i], hidden, c)return output.squeeze(0)def evaluateGRU(line_tensor):output = Nonehidden = gru.initHidden()for i in range(line_tensor.size()[0]):output, hidden = gru(line_tensor[i], hidden)return output.squeeze(0)# 构建预测函数
   def predict(input_line, evaluate, n_predictions=3):print("\n> %s" % input_line)with torch.no_grad():output = evaluate(lineToTensor(input_line))topv, topi = output.topk(n_predictions, 1, True)predictions = []for i in range(n_predictions):value = topv[0][i].item()category_index = topi[0][i].item()print("(%.2f) %s" % (value, all_categories[category_index]))predictions.append([value, all_categories[category_index]])# 调用试试
   for evaluate_fn in [evaluateRNN, evaluateLSTM, evaluateGRU]:predict('Dovesky', evaluate_fn)predict('Jackson', evaluate_fn)predict('Satoshi', evaluate_fn)