Linux设备模型(九) - bus/device/device_driver/class

一,设备驱动模型

1,概述

在前面写的驱动中,我们发现编写驱动有个固定的模式只有往里面套代码就可以了,它们之间的大致流程可以总结如下:

  • 实现入口函数xxx_init()和卸载函数xxx_exit()

  • 申请设备号 register_chrdev_region()

  • 初始化字符设备,cdev_init函数、cdev_add函数

  • 硬件初始化,如时钟寄存器配置使能,GPIO设置为输入输出模式等。

  • 构建file_operation结构体内容,实现硬件各个相关的操作

  • 在终端上使用mknod根据设备号来进行创建设备文件(节点) (也可以在驱动使用class_create创建设备类、在类的下面device_create创建设备节点)

因此,在Linux开发驱动,只要能够掌握了这些“套路”,开发一个驱动便不是难事。但是,如果我们将硬件的信息都写进了驱动里了, 根据某个硬件编写的驱动只要修改了一下引脚接口,这个驱动代码就得重新修改才能使用,这显然是不合理的。

那有没有合适的解决方案呢?答案是肯定的:

Linux引入了设备驱动模型分层的概念, 将我们编写的驱动代码分成:设备与驱动。

  • 设备负责提供硬件资源

  • 驱动代码负责去使用这些设备提供的硬件资源

  • 总线将它们联系起来

这样子就构成以下图形中的关系:

在实际操作上:

  • 每次有新设备device添加时,bus就会去匹配合适的驱动

  • 每次有新驱动driver添加时,bus就会去匹配合适的设备

  • 这样device代表的硬件设置就和driver代表的软件设计解耦了

当然实际中,同一总线下的设备有很多,驱动也有很多,在总线上管理着两个链表,分别管理着设备和驱动,当我们向系统注册一个驱动时,便会向驱动的管理链表插入我们的新驱动, 同样当我们向系统注册一个设备时,便会向设备的管理链表插入我们的新设备。

在插入的同时总线会执行一个匹配方法对新插入的设备/驱动进行匹配,在匹配成功的时候会调用驱动中的初始化方法,在移除设备或驱动时会调用注销方法。

以上只是设备驱动模型的机制 。

2,设备驱动模型初始化

从内核启动到driver_init()的流程:

start_kernel(void) // msm_kernel\init\main.carch_call_rest_init();rest_init();kernel_thread(kernel_init, NULL, CLONE_FS);kernel_init_freeable();do_basic_setup();driver_init();

driver_init()调用流程:

msm_kernel\drivers\base\init.c
/**
* driver_init - initialize driver model.
*
* Call the driver model init functions to initialize their
* subsystems. Called early from init/main.c.
*/
void __init driver_init(void)
{/* These are the core pieces */devtmpfs_init();devices_init(); //初始化 devices_kset, /sys/devices/buses_init(); //初始化bus_kset, /sys/bus/classes_init(); //初始化class_kset, /sys/class firmware_init();hypervisor_init();/* These are also core pieces, but must come after the* core core pieces.*/of_core_init(); //初始化of_ksetplatform_bus_init(); //注册platform_bus device和platform_bus_type buscpu_dev_init();memory_dev_init();container_dev_init();
}

二,总线的注册

在Linux设备模型中,Bus(总线)是一类特殊的设备,它是连接处理器和其它设备之间的通道(channel)。为了方便设备模型的实现,内核规定,系统中的每个设备都要连接在一个Bus上,这个Bus可以是一个内部Bus、虚拟Bus或者Platform Bus。内核通过struct bus_type结构,抽象Bus。

1,struct bus_type结构体

/**
* struct bus_type - The bus type of the device
*
* @name:    The name of the bus.
* @dev_name:    Used for subsystems to enumerate devices like ("foo%u", dev->id).
* @dev_root:    Default device to use as the parent.
* @bus_groups:    Default attributes of the bus.
* @dev_groups:    Default attributes of the devices on the bus.
* @drv_groups: Default attributes of the device drivers on the bus.
* @match:    Called, perhaps multiple times, whenever a new device or driver
*        is added for this bus. It should return a positive value if the
*        given device can be handled by the given driver and zero
*        otherwise. It may also return error code if determining that
*        the driver supports the device is not possible. In case of
*        -EPROBE_DEFER it will queue the device for deferred probing.
* @uevent:    Called when a device is added, removed, or a few other things
*        that generate uevents to add the environment variables.
* @probe:    Called when a new device or driver add to this bus, and callback
*        the specific driver's probe to initial the matched device.
* @sync_state:    Called to sync device state to software state after all the
*        state tracking consumers linked to this device (present at
*        the time of late_initcall) have successfully bound to a
*        driver. If the device has no consumers, this function will
*        be called at late_initcall_sync level. If the device has
*        consumers that are never bound to a driver, this function
*        will never get called until they do.
* @remove:    Called when a device removed from this bus.
* @shutdown:    Called at shut-down time to quiesce the device.
*
* @online:    Called to put the device back online (after offlining it).
* @offline:    Called to put the device offline for hot-removal. May fail.
*
* @suspend:    Called when a device on this bus wants to go to sleep mode.
* @resume:    Called to bring a device on this bus out of sleep mode.
* @num_vf:    Called to find out how many virtual functions a device on this
*        bus supports.
* @dma_configure:    Called to setup DMA configuration on a device on
*            this bus.
* @pm:        Power management operations of this bus, callback the specific
*        device driver's pm-ops.
* @iommu_ops:  IOMMU specific operations for this bus, used to attach IOMMU
*              driver implementations to a bus and allow the driver to do
*              bus-specific setup
* @p:        The private data of the driver core, only the driver core can
*        touch this.
* @lock_key:    Lock class key for use by the lock validator
* @need_parent_lock:    When probing or removing a device on this bus, the
*            device core should lock the device's parent.
*
* A bus is a channel between the processor and one or more devices. For the
* purposes of the device model, all devices are connected via a bus, even if
* it is an internal, virtual, "platform" bus. Buses can plug into each other.
* A USB controller is usually a PCI device, for example. The device model
* represents the actual connections between buses and the devices they control.
* A bus is represented by the bus_type structure. It contains the name, the
* default attributes, the bus' methods, PM operations, and the driver core's
* private data.
*/
struct bus_type {const char        *name; //总线的名字,在syfs中以目录的形式存在例如,/sys/bus/i2cconst char        *dev_name; //子系统枚举设备时的名字struct device        *dev_root;const struct attribute_group **bus_groups; //bus属性集const struct attribute_group **dev_groups; //device属性集const struct attribute_group **drv_groups; //driver属性集int (*match)(struct device *dev, struct device_driver *drv); /* bus提供的match函数, 一个由具体的bus driver实现的回调函数。当任何属于该Bus的device或者device_driver添加到内核时,内核都会调用该接口 */int (*uevent)(struct device *dev, struct kobj_uevent_env *env); /* 一个由具体的bus driver实现的回调函数。当任何属于该Bus的device,发生添加、移除或者其它动作时,Bus模块的核心逻辑就会调用该接口,以便bus driver能够修改环境变量 */int (*probe)(struct device *dev); /* bus提供的probe函数, 如果需要probe(其实就是初始化)指定的device话,需要保证该device所在的bus是被初始化过、确保能正确工作的。这就要就在执行device_driver的probe前,先执行它的bus的probe */void (*sync_state)(struct device *dev);int (*remove)(struct device *dev);void (*shutdown)(struct device *dev);int (*online)(struct device *dev);int (*offline)(struct device *dev);int (*suspend)(struct device *dev, pm_message_t state);int (*resume)(struct device *dev);int (*num_vf)(struct device *dev);int (*dma_configure)(struct device *dev);const struct dev_pm_ops *pm;const struct iommu_ops *iommu_ops;struct subsys_private *p; //bus的私有成员struct lock_class_key lock_key;bool need_parent_lock;ANDROID_KABI_RESERVE(1);ANDROID_KABI_RESERVE(2);ANDROID_KABI_RESERVE(3);ANDROID_KABI_RESERVE(4);
};

bus私有成员结构体,这个结构就是集合了一些bus模块需要使用的私有数据:

/**
* struct subsys_private - structure to hold the private to the driver core portions of the bus_type/class structure.
*
* @subsys - the struct kset that defines this subsystem
* @devices_kset - the subsystem's 'devices' directory
* @interfaces - list of subsystem interfaces associated
* @mutex - protect the devices, and interfaces lists.
*
* @drivers_kset - the list of drivers associated
* @klist_devices - the klist to iterate over the @devices_kset
* @klist_drivers - the klist to iterate over the @drivers_kset
* @bus_notifier - the bus notifier list for anything that cares about things
*                 on this bus.
* @bus - pointer back to the struct bus_type that this structure is associated
*        with.
*
* @glue_dirs - "glue" directory to put in-between the parent device to
*              avoid namespace conflicts
* @class - pointer back to the struct class that this structure is associated
*          with.
*
* This structure is the one that is the actual kobject allowing struct
* bus_type/class to be statically allocated safely.  Nothing outside of the
* driver core should ever touch these fields.
*/
struct subsys_private {struct kset subsys; //bus内嵌的kset,代表其自身 eg: /sys/bus/i2c,kset是一个特殊的kobject,用来集合相似的kobject,它在sysfs中也会以目录的形式体现struct kset *devices_kset; //属于subsys kset, eg: /sys/bus/i2c/devicesstruct list_head interfaces;struct mutex mutex;struct kset *drivers_kset; //属于subsys kset, eg: /sys/bus/i2c/driversstruct klist klist_devices; //本bus包含的所有设备struct klist klist_drivers; //本bus包含的所有driverstruct blocking_notifier_head bus_notifier;unsigned int drivers_autoprobe:1; //device与driver是否自动probestruct bus_type *bus; //回指到bus_typestruct kset glue_dirs;struct class *class;
};

2,bus_register()流程

3,关键代码流程分析

int bus_register(struct bus_type *bus)
{int retval;struct subsys_private *priv;struct lock_class_key *key = &bus->lock_key;priv = kzalloc(sizeof(struct subsys_private), GFP_KERNEL); //为struct subsys_private分配空间if (!priv)return -ENOMEM;priv->bus = bus; //私有成员的bus回指该busbus->p = priv; //初始化bus->p,即其私有属性BLOCKING_INIT_NOTIFIER_HEAD(&priv->bus_notifier);retval = kobject_set_name(&priv->subsys.kobj, "%s", bus->name); //设置该bus的名字,bus是kset的封装if (retval)goto out;priv->subsys.kobj.kset = bus_kset; //bus_ket即为所有bus的总起始端点,本bus从属于bus_ket,/sys/bus/priv->subsys.kobj.ktype = &bus_ktype; //属性操作级别统一为bus_ktypepriv->drivers_autoprobe = 1; //device与driver自动进行proberetval = kset_register(&priv->subsys); //注册kset,创建目录结构以及层级关系 /sys/bus/i2c/if (retval)goto out;retval = bus_create_file(bus, &bus_attr_uevent); //当前bus下生成uevent attribute文件 /sys/bus/i2c/ueventif (retval)goto bus_uevent_fail;priv->devices_kset = kset_create_and_add("devices", NULL, //初始化bus目录下的devices目录,里面级联了该bus下的设备,仍然以ket为原型&priv->subsys.kobj); // /sys/bus/i2c/devicesif (!priv->devices_kset) {retval = -ENOMEM;goto bus_devices_fail;}priv->drivers_kset = kset_create_and_add("drivers", NULL, //初始化bus目录下的drivers目录,里面级联了该bus下设备的driver&priv->subsys.kobj); // /sys/bus/i2c/driversif (!priv->drivers_kset) {retval = -ENOMEM;goto bus_drivers_fail;}INIT_LIST_HEAD(&priv->interfaces);__mutex_init(&priv->mutex, "subsys mutex", key);klist_init(&priv->klist_devices, klist_devices_get, klist_devices_put); //初始化klist_devices里的操作函数成员 klist_init(&priv->klist_drivers, NULL, NULL); //klist_drivers里的操作函数置空retval = add_probe_files(bus); /* 增加drivers_autoprobe和drivers_probe属性文件,/sys/bus/i2c/drivers_probe, /sys/bus/i2c/drivers_autoprobe */if (retval)goto bus_probe_files_fail;retval = bus_add_groups(bus, bus->bus_groups); //增加bus默认的属性文件, const struct attribute_group **bus_groups;if (retval)goto bus_groups_fail;pr_debug("bus: '%s': registered\n", bus->name);return 0;bus_groups_fail:remove_probe_files(bus);
bus_probe_files_fail:kset_unregister(bus->p->drivers_kset);
bus_drivers_fail:kset_unregister(bus->p->devices_kset);
bus_devices_fail:bus_remove_file(bus, &bus_attr_uevent);
bus_uevent_fail:kset_unregister(&bus->p->subsys);
out:kfree(bus->p);bus->p = NULL;return retval;
}

由此可见,bus又是kset的封装,bus_register主要完成了其私有成员priv的初始化,并初始化了其下的两个目录devices和drivers,及其属性文件,bus有个自己的根目录也就是bus有个起始端点,是bus_kset,经过此番的注册,bus目录下将会出现我们注册的bus,并且其下会有device和driver两个子目录,代表它下面的driver和device链表。

三,设备的注册

1,struct device 结构体

/**
* struct device - The basic device structure
* @parent:    The device's "parent" device, the device to which it is attached.
*         In most cases, a parent device is some sort of bus or host
*         controller. If parent is NULL, the device, is a top-level device,
*         which is not usually what you want.
* @p:        Holds the private data of the driver core portions of the device.
*         See the comment of the struct device_private for detail.
* @kobj:    A top-level, abstract class from which other classes are derived.
* @init_name:    Initial name of the device.
* @type:    The type of device.
*         This identifies the device type and carries type-specific
*         information.
* @mutex:    Mutex to synchronize calls to its driver.
* @lockdep_mutex: An optional debug lock that a subsystem can use as a
*         peer lock to gain localized lockdep coverage of the device_lock.
* @bus:    Type of bus device is on.
* @driver:    Which driver has allocated this
* @platform_data: Platform data specific to the device.
*         Example: For devices on custom boards, as typical of embedded
*         and SOC based hardware, Linux often uses platform_data to point
*         to board-specific structures describing devices and how they
*         are wired.  That can include what ports are available, chip
*         variants, which GPIO pins act in what additional roles, and so
*         on.  This shrinks the "Board Support Packages" (BSPs) and
*         minimizes board-specific #ifdefs in drivers.
* @driver_data: Private pointer for driver specific info.
* @links:    Links to suppliers and consumers of this device.
* @power:    For device power management.
*        See Documentation/driver-api/pm/devices.rst for details.
* @pm_domain:    Provide callbacks that are executed during system suspend,
*         hibernation, system resume and during runtime PM transitions
*         along with subsystem-level and driver-level callbacks.
* @em_pd:    device's energy model performance domain
* @pins:    For device pin management.
*        See Documentation/driver-api/pinctl.rst for details.
* @msi_list:    Hosts MSI descriptors
* @msi_domain: The generic MSI domain this device is using.
* @numa_node:    NUMA node this device is close to.
* @dma_ops:    DMA mapping operations for this device.
* @dma_mask:    Dma mask (if dma'ble device).
* @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all
*         hardware supports 64-bit addresses for consistent allocations
*         such descriptors.
* @bus_dma_limit: Limit of an upstream bridge or bus which imposes a smaller
*        DMA limit than the device itself supports.
* @dma_range_map: map for DMA memory ranges relative to that of RAM
* @dma_parms:    A low level driver may set these to teach IOMMU code about
*         segment limitations.
* @dma_pools:    Dma pools (if dma'ble device).
* @dma_mem:    Internal for coherent mem override.
* @cma_area:    Contiguous memory area for dma allocations
* @archdata:    For arch-specific additions.
* @of_node:    Associated device tree node.
* @fwnode:    Associated device node supplied by platform firmware.
* @devt:    For creating the sysfs "dev".
* @id:        device instance
* @devres_lock: Spinlock to protect the resource of the device.
* @devres_head: The resources list of the device.
* @knode_class: The node used to add the device to the class list.
* @class:    The class of the device.
* @groups:    Optional attribute groups.
* @release:    Callback to free the device after all references have
*         gone away. This should be set by the allocator of the
*         device (i.e. the bus driver that discovered the device).
* @iommu_group: IOMMU group the device belongs to.
* @iommu:    Per device generic IOMMU runtime data
*
* @offline_disabled: If set, the device is permanently online.
* @offline:    Set after successful invocation of bus type's .offline().
* @of_node_reused: Set if the device-tree node is shared with an ancestor
*              device.
* @state_synced: The hardware state of this device has been synced to match
*          the software state of this device by calling the driver/bus
*          sync_state() callback.
* @dma_coherent: this particular device is dma coherent, even if the
*        architecture supports non-coherent devices.
* @dma_ops_bypass: If set to %true then the dma_ops are bypassed for the
*        streaming DMA operations (->map_* / ->unmap_* / ->sync_*),
*        and optionall (if the coherent mask is large enough) also
*        for dma allocations.  This flag is managed by the dma ops
*        instance from ->dma_supported.
*
* At the lowest level, every device in a Linux system is represented by an
* instance of struct device. The device structure contains the information
* that the device model core needs to model the system. Most subsystems,
* however, track additional information about the devices they host. As a
* result, it is rare for devices to be represented by bare device structures;
* instead, that structure, like kobject structures, is usually embedded within
* a higher-level representation of the device.
*/
struct device {struct kobject kobj; //该数据结构对应的struct kobject,代表自身struct device        *parent; //该设备的父设备,一般是该设备所从属的bus、controller等设备struct device_private    *p; //一个用于struct device的私有数据结构指针const char        *init_name; /* initial name of the device */ /* 任何注册到内核中的设备,都必须有一个合法的名称,可以在初始化时给出,也可以由内核根据“bus name + device ID”的方式创造 */const struct device_type *type;struct bus_type    *bus;        /* type of bus device is on */struct device_driver *driver;    /* which driver has allocated thisdevice */void        *platform_data;    /* Platform specific data, devicecore doesn't touch it */void        *driver_data;    /* Driver data, set and get withdev_set_drvdata/dev_get_drvdata */
#ifdef CONFIG_PROVE_LOCKINGstruct mutex        lockdep_mutex;
#endifstruct mutex        mutex;    /* mutex to synchronize calls to* its driver.*/struct dev_links_info    links;struct dev_pm_info    power;struct dev_pm_domain    *pm_domain;#ifdef CONFIG_ENERGY_MODELstruct em_perf_domain    *em_pd;
#endif#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAINstruct irq_domain    *msi_domain;
#endif
#ifdef CONFIG_PINCTRLstruct dev_pin_info    *pins;
#endif
#ifdef CONFIG_GENERIC_MSI_IRQstruct list_head    msi_list;
#endif
#ifdef CONFIG_DMA_OPSconst struct dma_map_ops *dma_ops;
#endifu64        *dma_mask;    /* dma mask (if dma'able device) */u64        coherent_dma_mask;/* Like dma_mask, but foralloc_coherent mappings asnot all hardware supports64 bit addresses for consistentallocations such descriptors. */u64        bus_dma_limit;    /* upstream dma constraint */const struct bus_dma_region *dma_range_map;struct device_dma_parameters *dma_parms;struct list_head    dma_pools;    /* dma pools (if dma'ble) */#ifdef CONFIG_DMA_DECLARE_COHERENTstruct dma_coherent_mem    *dma_mem; /* internal for coherent memoverride */
#endif
#ifdef CONFIG_DMA_CMAstruct cma *cma_area;        /* contiguous memory area for dmaallocations */
#endif/* arch specific additions */struct dev_archdata    archdata;struct device_node    *of_node; /* associated device tree node */struct fwnode_handle    *fwnode; /* firmware device node */#ifdef CONFIG_NUMAint        numa_node;    /* NUMA node this device is close to */
#endifdev_t            devt;    /* dev_t, creates the sysfs "dev" */ /* 该变量主要用于在sys文件系统中,为每个具有设备号的device,创建/sys/dev/* 下的对应目录 */u32            id;    /* device instance */spinlock_t        devres_lock;struct list_head    devres_head;struct class        *class; //该设备属于哪个classconst struct attribute_group **groups;    /* optional groups */ /* 该设备的默认attribute集合。将会在设备注册时自动在sysfs中创建对应的文件 */void    (*release)(struct device *dev);struct iommu_group    *iommu_group;struct dev_iommu    *iommu;bool            offline_disabled:1;bool            offline:1;bool            of_node_reused:1;bool            state_synced:1;
#if defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE) || \defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU) || \defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL)bool            dma_coherent:1;
#endif
#ifdef CONFIG_DMA_OPS_BYPASSbool            dma_ops_bypass : 1;
#endifANDROID_KABI_RESERVE(1);ANDROID_KABI_RESERVE(2);ANDROID_KABI_RESERVE(3);ANDROID_KABI_RESERVE(4);ANDROID_KABI_RESERVE(5);ANDROID_KABI_RESERVE(6);ANDROID_KABI_RESERVE(7);ANDROID_KABI_RESERVE(8);
};

设备的私有属性结构:

/**
* struct device_private - structure to hold the private to the driver core portions of the device structure.
*
* @klist_children - klist containing all children of this device
* @knode_parent - node in sibling list
* @knode_driver - node in driver list
* @knode_bus - node in bus list
* @knode_class - node in class list
* @deferred_probe - entry in deferred_probe_list which is used to retry the
*    binding of drivers which were unable to get all the resources needed by
*    the device; typically because it depends on another driver getting
*    probed first.
* @async_driver - pointer to device driver awaiting probe via async_probe
* @device - pointer back to the struct device that this structure is
* associated with.
* @dead - This device is currently either in the process of or has been
*    removed from the system. Any asynchronous events scheduled for this
*    device should exit without taking any action.
*
* Nothing outside of the driver core should ever touch these fields.
*/
struct device_private {struct klist klist_children; //包含的子设备struct klist_node knode_parent; //父级挂接点struct klist_node knode_driver; //driver list挂接点struct klist_node knode_bus; //bus list挂接点struct klist_node knode_class; //class list挂接点struct list_head deferred_probe;struct device_driver *async_driver;char *deferred_probe_reason;struct device *device; //回指向该设备u8 dead:1;
};

2,device_register()流程

清晰分解图:

3,关键代码流程分析

/* device_initialize */

void device_initialize(struct device *dev)
{dev->kobj.kset = devices_kset; //device kobject属于devices_ksetkobject_init(&dev->kobj, &device_ktype); //初始化这个kobj并建立层次关系以及属性文件,此时是放到了总的device文件目录下面INIT_LIST_HEAD(&dev->dma_pools);mutex_init(&dev->mutex);
#ifdef CONFIG_PROVE_LOCKINGmutex_init(&dev->lockdep_mutex);
#endiflockdep_set_novalidate_class(&dev->mutex);spin_lock_init(&dev->devres_lock);INIT_LIST_HEAD(&dev->devres_head);device_pm_init(dev);set_dev_node(dev, -1);
#ifdef CONFIG_GENERIC_MSI_IRQINIT_LIST_HEAD(&dev->msi_list);
#endifINIT_LIST_HEAD(&dev->links.consumers);INIT_LIST_HEAD(&dev->links.suppliers);INIT_LIST_HEAD(&dev->links.defer_sync);dev->links.status = DL_DEV_NO_DRIVER;
}

/* device_add */

int device_add(struct device *dev)
{struct device *parent;struct kobject *kobj;struct class_interface *class_intf;int error = -EINVAL;struct kobject *glue_dir = NULL;dev = get_device(dev);if (!dev)goto done;if (!dev->p) {error = device_private_init(dev); //初始化dev的私有成员及其链表操作函数if (error)goto done;}/** for statically allocated devices, which should all be converted* some day, we need to initialize the name. We prevent reading back* the name, and force the use of dev_name()*/if (dev->init_name) {dev_set_name(dev, "%s", dev->init_name); //设置kobject的名字,kobj->name = sdev->init_name = NULL;}/* subsystems can specify simple device enumeration */if (!dev_name(dev) && dev->bus && dev->bus->dev_name)dev_set_name(dev, "%s%u", dev->bus->dev_name, dev->id); //如果kobj的名字为空,则使用总线名字+设备的ID组合当做设备名字if (!dev_name(dev)) {error = -EINVAL;goto name_error; //如果dev的名字还是空则退出,必须有正确的设备名字才能被注册}pr_debug("device: '%s': %s\n", dev_name(dev), __func__);parent = get_device(dev->parent);kobj = get_device_parent(dev, parent); //获取父亲节点if (IS_ERR(kobj)) {error = PTR_ERR(kobj);goto parent_error;}if (kobj)dev->kobj.parent = kobj;/* use parent numa_node */if (parent && (dev_to_node(dev) == NUMA_NO_NODE))set_dev_node(dev, dev_to_node(parent));/* first, register with generic layer. *//* we require the name to be set before, and pass NULL */error = kobject_add(&dev->kobj, dev->kobj.parent, NULL); //初始化kobj与其父亲节点的连接,在父亲dev的目录下会创建该device的sysfs path,并设置kobj->state_in_sysfs为1,表示该设备已被注册if (error) {glue_dir = get_glue_dir(dev);goto Error;}/* notify platform of device entry */error = device_platform_notify(dev, KOBJ_ADD);if (error)goto platform_error;error = device_create_file(dev, &dev_attr_uevent); //产生uevent属性文件,/sys/devices/llcc-pmu/ueventif (error)goto attrError;error = device_add_class_symlinks(dev); //在dev的path创建一些符号链接,具体链接上述流程图中有示例if (error)goto SymlinkError;error = device_add_attrs(dev); //在dev的path添加一些属性文件if (error)goto AttrsError;error = bus_add_device(dev); //把设备添加到busif (error)goto BusError;error = dpm_sysfs_add(dev);if (error)goto DPMError;device_pm_add(dev);if (MAJOR(dev->devt)) {error = device_create_file(dev, &dev_attr_dev);if (error)goto DevAttrError;error = device_create_sys_dev_entry(dev);if (error)goto SysEntryError;devtmpfs_create_node(dev);}/* Notify clients of device addition.  This call must come* after dpm_sysfs_add() and before kobject_uevent().*/if (dev->bus)blocking_notifier_call_chain(&dev->bus->p->bus_notifier,BUS_NOTIFY_ADD_DEVICE, dev);kobject_uevent(&dev->kobj, KOBJ_ADD); //发送该设备被ADD的uevent消息 KOBJ_ADD/** Check if any of the other devices (consumers) have been waiting for* this device (supplier) to be added so that they can create a device* link to it.** This needs to happen after device_pm_add() because device_link_add()* requires the supplier be registered before it's called.** But this also needs to happen before bus_probe_device() to make sure* waiting consumers can link to it before the driver is bound to the* device and the driver sync_state callback is called for this device.*/if (dev->fwnode && !dev->fwnode->dev) {dev->fwnode->dev = dev;fw_devlink_link_device(dev);}bus_probe_device(dev); //为一个新的device探测driverif (parent)klist_add_tail(&dev->p->knode_parent,&parent->p->klist_children); //如果该设备有关联的父设备,将该设备挂接到父设备的children listif (dev->class) {mutex_lock(&dev->class->p->mutex);/* tie the class to the device */klist_add_tail(&dev->p->knode_class,&dev->class->p->klist_devices); //如果设备跟class关联,将设备挂接到class list/* notify any interfaces that the device is here */list_for_each_entry(class_intf,&dev->class->p->interfaces, node)if (class_intf->add_dev)class_intf->add_dev(dev, class_intf);mutex_unlock(&dev->class->p->mutex);}
done:put_device(dev); //减少device的引用计数return error;
SysEntryError:if (MAJOR(dev->devt))device_remove_file(dev, &dev_attr_dev);
DevAttrError:device_pm_remove(dev);dpm_sysfs_remove(dev);
DPMError:bus_remove_device(dev);
BusError:device_remove_attrs(dev);
AttrsError:device_remove_class_symlinks(dev);
SymlinkError:device_remove_file(dev, &dev_attr_uevent);
attrError:device_platform_notify(dev, KOBJ_REMOVE);
platform_error:kobject_uevent(&dev->kobj, KOBJ_REMOVE);glue_dir = get_glue_dir(dev);kobject_del(&dev->kobj);
Error:cleanup_glue_dir(dev, glue_dir);
parent_error:put_device(parent);
name_error:kfree(dev->p);dev->p = NULL;goto done;
}

/* bus_add_device */

int bus_add_device(struct device *dev)
{struct bus_type *bus = bus_get(dev->bus);int error = 0;if (bus) {pr_debug("bus: '%s': add device %s\n", bus->name, dev_name(dev));error = device_add_groups(dev, bus->dev_groups); //在该设备的sysfs目录中创建bus上默认的属性文件if (error)goto out_put;error = sysfs_create_link(&bus->p->devices_kset->kobj,&dev->kobj, dev_name(dev)); /* 调用sysfs_create_link接口,将该device在sysfs中的目录,链接到该bus的device目录下,eg: /sys/bus/platform/devices/soc:gpio_keys -> ../../../devices/platform/soc/soc:gpio_keys */if (error)goto out_groups;error = sysfs_create_link(&dev->kobj,&dev->bus->p->subsys.kobj, "subsystem"); /* 调用sysfs_create_link接口,在该device的sysfs中创建一个指向该设备所在bus目录的链接,取名为subsystem eg: /sys/devices/platform/soc/soc:gpio_keys/subsystem -> ../../../../bus/platform */if (error)goto out_subsys;klist_add_tail(&dev->p->knode_bus, &bus->p->klist_devices); //将该设备挂接到bus的device list链表}return 0;out_subsys:sysfs_remove_link(&bus->p->devices_kset->kobj, dev_name(dev));
out_groups:device_remove_groups(dev, bus->dev_groups);
out_put:bus_put(dev->bus);return error;
}

/*__device_attach */

static int __device_attach(struct device *dev, bool allow_async)
{int ret = 0;bool async = false;device_lock(dev);if (dev->p->dead) {goto out_unlock; //如果设备已经dead直接退出} else if (dev->driver) { //默认指定了driver就直接绑定if (device_is_bound(dev)) { //判断该设备是否已经driver绑定,这一点很重要,通过它,可以使同一个Driver,驱动相同名称的多个设备ret = 1;goto out_unlock; //如果设备已经绑定过驱动直接退出}ret = device_bind_driver(dev); //将一个driver与一个device绑定if (ret == 0)ret = 1;else {dev->driver = NULL;ret = 0;}} else {struct device_attach_data data = {.dev = dev,.check_async = allow_async,.want_async = false,};if (dev->parent)pm_runtime_get_sync(dev->parent);ret = bus_for_each_drv(dev->bus, NULL, &data,__device_attach_driver); //没有给设备指定driver就进行遍历匹配if (!ret && allow_async && data.have_async) {/** If we could not find appropriate driver* synchronously and we are allowed to do* async probes and there are drivers that* want to probe asynchronously, we'll* try them.*/dev_dbg(dev, "scheduling asynchronous probe\n");get_device(dev);async = true;} else {pm_request_idle(dev);}if (dev->parent)pm_runtime_put(dev->parent);}
out_unlock:device_unlock(dev);if (async)async_schedule_dev(__device_attach_async_helper, dev);return ret;
}

/* bus_for_each_drv */

int bus_for_each_drv(struct bus_type *bus, struct device_driver *start,void *data, int (*fn)(struct device_driver *, void *))
{struct klist_iter i;struct device_driver *drv;int error = 0;if (!bus)return -EINVAL;klist_iter_init_node(&bus->p->klist_drivers, &i,start ? &start->p->knode_bus : NULL); /* 从头开始遍历bus的driver链表,发现一个driver就调用fn即__device_attach_driver进行匹配 */while ((drv = next_driver(&i)) && !error)error = fn(drv, data);klist_iter_exit(&i);return error;
}

/* __device_attach_driver */

static int __device_attach_driver(struct device_driver *drv, void *_data)
{struct device_attach_data *data = _data;struct device *dev = data->dev;bool async_allowed;int ret;ret = driver_match_device(drv, dev); /* drv->bus->match(dev, drv)调用bus的match函数,检查device与driver是否匹配,device和device_driver必须具备相同的名称,内核才能完成匹配操作,进而调用device_driver中的相应接口。这里的同名,作用范围是同一个bus下的所有device和device_driver */if (ret == 0) {/* no match */return 0;} else if (ret == -EPROBE_DEFER) {dev_dbg(dev, "Device match requests probe deferral\n");driver_deferred_probe_add(dev);/** Device can't match with a driver right now, so don't attempt* to match or bind with other drivers on the bus.*/return ret;} else if (ret < 0) {dev_dbg(dev, "Bus failed to match device: %d\n", ret);return ret;} /* ret > 0 means positive match */async_allowed = driver_allows_async_probing(drv);if (async_allowed)data->have_async = true;if (data->check_async && async_allowed != data->want_async)return 0;return driver_probe_device(drv, dev); //device与driver匹配成功,将device与driver绑定
}

/* really_probe */

static int really_probe(struct device *dev, struct device_driver *drv)
{int ret = -EPROBE_DEFER;int local_trigger_count = atomic_read(&deferred_trigger_count);bool test_remove = IS_ENABLED(CONFIG_DEBUG_TEST_DRIVER_REMOVE) &&!drv->suppress_bind_attrs;ret = device_links_check_suppliers(dev);if (ret == -EPROBE_DEFER)driver_deferred_probe_add_trigger(dev, local_trigger_count);if (ret)return ret;atomic_inc(&probe_count);pr_debug("bus: '%s': %s: probing driver %s with device %s\n",drv->bus->name, __func__, drv->name, dev_name(dev));if (!list_empty(&dev->devres_head)) {dev_crit(dev, "Resources present before probing\n");ret = -EBUSY;goto done;}re_probe:dev->driver = drv; //将绑定的driver赋值给dev->driver/* If using pinctrl, bind pins now before probing */ret = pinctrl_bind_pins(dev);if (ret)goto pinctrl_bind_failed;if (dev->bus->dma_configure) {ret = dev->bus->dma_configure(dev);if (ret)goto probe_failed;}ret = driver_sysfs_add(dev); //创建driver与device之间的符号链接if (ret) {pr_err("%s: driver_sysfs_add(%s) failed\n",__func__, dev_name(dev));goto probe_failed;}if (dev->pm_domain && dev->pm_domain->activate) {ret = dev->pm_domain->activate(dev);if (ret)goto probe_failed;}if (dev->bus->probe) {         //如果bus有probe函数优先执行bus的probe函数,如果没有则执行驱动的probe函数ret = dev->bus->probe(dev);if (ret)goto probe_failed;} else if (drv->probe) {ret = drv->probe(dev);if (ret)goto probe_failed;}ret = device_add_groups(dev, drv->dev_groups); //创建属性文件,const struct attribute_group **dev_groupsif (ret) {dev_err(dev, "device_add_groups() failed\n");goto dev_groups_failed;}if (dev_has_sync_state(dev)) {ret = device_create_file(dev, &dev_attr_state_synced);if (ret) {dev_err(dev, "state_synced sysfs add failed\n");goto dev_sysfs_state_synced_failed;}}pinctrl_init_done(dev);if (dev->pm_domain && dev->pm_domain->sync)dev->pm_domain->sync(dev);driver_bound(dev); //将该设备挂接到driver的device list,一个driver可以对应于几个设备,因此driver同样有其设备链表,用于挂接可以操作的设备ret = 1;pr_debug("bus: '%s': %s: bound device %s to driver %s\n",drv->bus->name, __func__, dev_name(dev), drv->name);goto done;dev_sysfs_state_synced_failed:device_remove_groups(dev, drv->dev_groups);
dev_groups_failed:if (dev->bus->remove)dev->bus->remove(dev);else if (drv->remove)drv->remove(dev);
probe_failed:if (dev->bus)blocking_notifier_call_chain(&dev->bus->p->bus_notifier,BUS_NOTIFY_DRIVER_NOT_BOUND, dev);
pinctrl_bind_failed:device_links_no_driver(dev);devres_release_all(dev);arch_teardown_dma_ops(dev);kfree(dev->dma_range_map);dev->dma_range_map = NULL;driver_sysfs_remove(dev);dev->driver = NULL;dev_set_drvdata(dev, NULL);if (dev->pm_domain && dev->pm_domain->dismiss)dev->pm_domain->dismiss(dev);pm_runtime_reinit(dev);dev_pm_set_driver_flags(dev, 0);switch (ret) {case -EPROBE_DEFER:/* Driver requested deferred probing */dev_dbg(dev, "Driver %s requests probe deferral\n", drv->name);driver_deferred_probe_add_trigger(dev, local_trigger_count);break;case -ENODEV:case -ENXIO:pr_debug("%s: probe of %s rejects match %d\n",drv->name, dev_name(dev), ret);break;default:/* driver matched but the probe failed */pr_warn("%s: probe of %s failed with error %d\n",drv->name, dev_name(dev), ret);}/** Ignore errors returned by ->probe so that the next driver can try* its luck.*/ret = 0;
done:atomic_dec(&probe_count);wake_up_all(&probe_waitqueue);return ret;
}

/* driver_sysfs_add */

static int driver_sysfs_add(struct device *dev)
{int ret;if (dev->bus)blocking_notifier_call_chain(&dev->bus->p->bus_notifier,BUS_NOTIFY_BIND_DRIVER, dev);ret = sysfs_create_link(&dev->driver->p->kobj, &dev->kobj,kobject_name(&dev->kobj)); /* 在该设备绑定的bus下的driver目录中创建一个指向该device在sysfs下的目录,名字为设备的名字 eg: /sys/bus/platform/drivers/gpio-keys/soc:gpio_keys -> ../../../../devices/platform/soc/soc:gpio_keys */if (ret)goto fail;ret = sysfs_create_link(&dev->kobj, &dev->driver->p->kobj,"driver"); /* 在该device的sysfs目录下创建一个指向该设备绑定的bus下的driver目录的链接,名字为"driver", eg: /sys/devices/platform/soc/soc:gpio_keys/driver -> ../../../../bus/platform/drivers/gpio-keys  */if (ret)goto rm_dev;if (!IS_ENABLED(CONFIG_DEV_COREDUMP) || !dev->driver->coredump ||!device_create_file(dev, &dev_attr_coredump))return 0;sysfs_remove_link(&dev->kobj, "driver");rm_dev:sysfs_remove_link(&dev->driver->p->kobj,kobject_name(&dev->kobj));fail:return ret;
}

/* driver_bound */

static void driver_bound(struct device *dev)
{if (device_is_bound(dev)) {pr_warn("%s: device %s already bound\n",__func__, kobject_name(&dev->kobj));return;}pr_debug("driver: '%s': %s: bound to device '%s'\n", dev->driver->name,__func__, dev_name(dev));klist_add_tail(&dev->p->knode_driver, &dev->driver->p->klist_devices); //将该设备挂接到driver的device listdevice_links_driver_bound(dev);device_pm_check_callbacks(dev);/** Make sure the device is no longer in one of the deferred lists and* kick off retrying all pending devices*/driver_deferred_probe_del(dev);driver_deferred_probe_trigger();if (dev->bus)blocking_notifier_call_chain(&dev->bus->p->bus_notifier,BUS_NOTIFY_BOUND_DRIVER, dev);kobject_uevent(&dev->kobj, KOBJ_BIND); //device与driver已经绑定,发出该设备的KOBJ_BIND uevent消息
}

device注册主要是在devices_kset的目录中创建了属于该设备的目录结构,并将该设备挂接在bus的device list中,然后遍历bus的driver list,为该设备查找匹配的驱动,当匹配成功之后将device与driver绑定,一个device只能与一个driver对应,一个driver能驱动多个device,整个过程中还伴随着一些属性文件的创建,通过这些属性文件可以直接读写设备的信息,以及一些符号链接的创建,通过这些符号链接class/bus/device/driver可以关联在一起,bus下的device会指向实际的sysfs下的device,bus下的driver也会指向实际的sysfs下的device,sysfs下的device也会有名字为driver指向bus下driver的软链接,class下也有指向实际的sysfs下的device的链接。

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处:http://www.mzph.cn/news/719350.shtml

如若内容造成侵权/违法违规/事实不符,请联系多彩编程网进行投诉反馈email:809451989@qq.com,一经查实,立即删除!

相关文章

Spring源码:手写SpringDI

我们是在实现了SpringIOC的基础上&#xff0c;进行拓展&#xff0c;IOC实现源码可以查看&#xff1a;手写SpringIOC 文章目录 一、分析二、实现1、构造注入1&#xff09;分析2&#xff09;版本1BeanReferenceBeanDefinitionGenericBeanDefinitionDefaultBeanFactory1、改造构造…

ES入门六:Suggesters Api实践

都是负担在很多app上&#xff0c;当我们输入某些内容时候&#xff0c;它会立即做一些补全操作&#xff0c;如果我想实现上述的需求&#xff0c;我们就可以使用ES提供的Suggesters Api。那Suggesters是如何做到的那&#xff1f;简单来说&#xff0c;Suggesters会将输入的文本拆分…

【网站项目】167固定资产管理系统

&#x1f64a;作者简介&#xff1a;拥有多年开发工作经验&#xff0c;分享技术代码帮助学生学习&#xff0c;独立完成自己的项目或者毕业设计。 代码可以私聊博主获取。&#x1f339;赠送计算机毕业设计600个选题excel文件&#xff0c;帮助大学选题。赠送开题报告模板&#xff…

谁才是“内卷”之王?众多洗地机品牌哪家清洁力最强?清洁最干净?

在如今快节奏的生活中&#xff0c;家庭清洁工作愈发显得繁琐而耗时。添可洗地机凭借其高效的一体化清洁功能和智能化操作&#xff0c;为现代家庭生活带来了极大的便利。面对众多款品牌洗地机型号&#xff0c;消费者不禁会问&#xff1a;哪家洗地机清洁力最强&#xff1f;在性能…

解决tomcat双击startup.bat一闪而过的问题

这种问题可能是tomcat找不到你的jdk环境配置路径 1、首先在tomcat的bin文件夹找到startup.bat 和catalina.bat两个文件 2、startup.bat用记事本打开 在末尾添加pause 3、保存修改&#xff0c;双击startup.bat如果出现这种问题&#xff0c;就是找不到jdk路径 4、用记事本打开ca…

STM32CubeMX实战教程: TIM6、TIM7 - 基本定时器

目录 一、基本定时器的作用 二、常用型号的TIM时钟频率 三、CubeMX配置 四、编写执行代码 一、基本定时器的作用 基本定时器&#xff0c;主要用于实现定时和计数功能。作用包括&#xff1a; 定时功能&#xff1a;可以产生周期性的中断&#xff0c;用于实现定时任务。例如&…

什么是Docker容器?

Docker是一种轻量级的虚拟化技术&#xff0c;同时是一个开源的应用容器运行环境搭建平台&#xff0c;可以让开发者以便捷方式打包应用到一个可移植的容器中&#xff0c;然后安装至任何运行Linux或Windows等系统的服务器上。相较于传统虚拟机&#xff0c;Docker容器提供轻量化的…

linux安装mysql5.7

linux安装mysql5.7 一、下载mysql5.7二、解压包介绍三、上传包到linux四、卸载mariadb五、安装mysql六、修改权限七、启动mysql八、使用过navicat创作不易&#xff0c;笔记不易&#xff0c;如觉不错&#xff0c;请三连&#xff0c;谢谢~~ 一、下载mysql5.7 去mysql官方下载&am…

MES系统在离散制造企业中的功能解析

随着信息技术的快速发展和制造业的转型升级&#xff0c;MES在离散制造企业中的作用日益凸显。MES系统不仅提高了生产效率和产品质量&#xff0c;还优化了资源配置&#xff0c;增强了企业的市场竞争力。 一、生产管理功能 MES系统能够实时监控生产现场的各种数据&#xff0c;包…

二叉搜索树题目:将有序数组转换为二叉搜索树

文章目录 题目标题和出处难度题目描述要求示例数据范围 解法思路和算法证明代码复杂度分析 题目 标题和出处 标题&#xff1a;将有序数组转换为二叉搜索树 出处&#xff1a;108. 将有序数组转换为二叉搜索树 难度 4 级 题目描述 要求 给定整数数组 nums \texttt{nums}…

15 easy 141. 环形链表

法1&#xff1a;快慢指针法&#xff1a; //给你一个链表的头节点 head &#xff0c;判断链表中是否有环。 // // 如果链表中有某个节点&#xff0c;可以通过连续跟踪 next 指针再次到达&#xff0c;则链表中存在环。 为了表示给定链表中的环&#xff0c;评测系统内部使用整数…

Python爬虫副业真的可行吗?

首先回答你&#xff0c;是可行的&#xff0c;python爬虫能当副业&#xff0c;副业的方式比较多&#xff0c;等下我会讲几种。 那学到哪个层次可以接单呢&#xff1f;主要看你是接什么样的单&#xff0c;爬一些资料&#xff0c;视频这种简单的学一两个月就没什么问题&#xff0…

第一天 走进Docker的世界

第一天 走进Docker的世界 介绍docker的前世今生&#xff0c;了解docker的实现原理&#xff0c;以Django项目为例&#xff0c;带大家如何编写最佳的Dockerfile构建镜像。通过本章的学习&#xff0c;大家会知道docker的概念及基本操作&#xff0c;并学会构建自己的业务镜像&…

一文读懂Persistence One- 如何将Restaking带入Cosmos

Persistence One正在将Restaking引入Cosmos。用户将能够通过pSTAKE、Stride、Quicksilver和Milkyway将Liquid Staked Tokens&#xff08;如ATOM、TIA、DYDX等&#xff09;存入Persistence One&#xff0c;对其进行Restaking&#xff0c;从而安全地连接更多区块链&#xff0c;首…

MySQL:数据库中有哪些锁

1、全局锁 加上全局锁后整个数据库就处于只读状态了&#xff0c;这时其他线程执行以下操作&#xff0c;都会被阻塞&#xff1a; 对数据的增删改操作&#xff0c;比如 insert、delete、update等语句&#xff1b;对表结构的更改操作&#xff0c;比如 alter table、drop table 等…

Android APK包反编译为java文件教程

方法 流程&#xff1a; test.apk -> smali文件 -> dex文件 -> jar文件 ->java 文件 将APK包解压为 smail文件 下载 apktool工具 apktool.jar 将 test.apk 和 apktool.jar放同一目录下&#xff0c;并执行以下命令 java -jar apktool.jar d -f xxx.apk -o xxx(解…

【如何像网吧一样弄个游戏菜单在家里】

GGmenu 个人家庭版游戏、应用管理 桌面图标管理器

[环境配置]ssh连接报错“kex_exchange_identification: read: Connection reset by peer”

已经被VScode ssh毒死好几次了&#xff0c;都是执行命令意外中断&#xff0c;然后又VSCode里连不上、本机Terminal也连不上了。。。 重启远程服务器&#xff0c;VSCode可以连上了&#xff0c; 系统ssh还是不行&#xff0c;报错“kex_exchange_identification: read: Connecti…

Java学习笔记002——类的修饰符

在Java语言中&#xff0c;类的访问修饰符决定了其它类能够访问该类的方式。类有如下4种访问修饰符&#xff0c;在创建类时用于类的声明&#xff1a; 1、public: 当一个类被声明为public时&#xff0c;它可以从任何其他类中被访问&#xff0c;无论这些类位于哪个包中。通常&am…

数字化转型导师坚鹏:BLM证券公司数字化转型战略

BLM证券公司数字化转型战略 ——以BLM模型为核心&#xff0c;实现知行果合一 课程背景&#xff1a; 很多证券公司存在以下问题&#xff1a; 不知道如何系统地制定证券公司数字化转型战略&#xff1f; 不清楚其它证券公司数字化转型战略是如何制定的&#xff1f; 不知道…