本示例使用的设备： WIFI/TCP/UDP/HTTP协议RFID液显网络读卡器可二次开发语音播报POE-淘宝网 (taobao.com)
#ifndef MAINWINDOW_H
#define MAINWINDOW_H#include <QMainWindow>
#include <QHostInfo>
#include <QNetworkInterface>
#include <QStringList>
#include <QUdpSocket>
#include <QException>QT_BEGIN_NAMESPACE
namespace Ui { class MainWindow; }
QT_END_NAMESPACEclass Setnetpara; // 前向声明class MainWindow : public QMainWindow
{Q_OBJECTpublic:MainWindow(QWidget *parent = nullptr);~MainWindow();private slots:void sockinit(); //初始化Socket Udpvoid listadditems(int ctr,QString listinfo); //显示通读报文void read_data(); //UDP端口接收数据void DisableSendAgain(QHostAddress ip,quint16 port,unsigned char buf[], qint64 len); //确认接收到数据void Analyze_c1(QHostAddress ip,quint16 port,unsigned char buf[], qint64 len); //解析读取M1卡卡号void Analyze_c3(QHostAddress ip,quint16 port,unsigned char buf[], qint64 len); //主动读取M1卡扇区数据的返回void Analyze_c5(QHostAddress ip,quint16 port,unsigned char buf[], qint64 len); //指定区号密钥读取M1卡扇区数据void Analyze_cd(QHostAddress ip,quint16 port,unsigned char buf[], qint64 len); //指定区号密钥写数据到M1卡扇区的返回void Analyze_d1(QHostAddress ip,quint16 port,unsigned char buf[], qint64 len); //解析读取ID卡卡号void Analyze_cf_df(QHostAddress ip,quint16 port,unsigned char buf[], qint64 len); //解析IC、ID卡离开读卡器void Analyze_f2(QHostAddress ip,quint16 port,unsigned char buf[], qint64 len); //解析设备开机、响应搜索指令的返回void Analyze_f6(QHostAddress ip,quint16 port,unsigned char buf[], qint64 len); //响应查询设备型号固件日期指令的返回void Analyze_a4(QHostAddress ip,quint16 port,unsigned char buf[], qint64 len); //查询wifi连接状态void Respondinfo(QString Dispinf,QHostAddress ip,quint16 port,QString DeviceNumber); //接收到设备信息立即回应void SendBuffAct();void on_PBSearch_clicked();void on_CBIP_currentIndexChanged(int index);void on_PBClear_clicked();void on_tableWidget_cellClicked(int row, int column);void on_PBEditpara_clicked();void on_PBSendDispBeep_clicked();void on_PBbeep_clicked();void on_PBSwitchOn_clicked();void on_PBSwitchOff_clicked();void on_PBSendDispTTS_clicked();void on_PBSendDispSpk_clicked();void on_PBReadCard_clicked();void on_PBWriteCard_clicked();void on_PBChangeKey_clicked();void on_PBSetRW_clicked();void on_PBcopylist_clicked();void on_pushButton_9_clicked();void on_pushButton_clicked();void on_pushButton_2_clicked();void on_pushButton_4_clicked();void on_pushButton_3_clicked();void on_pushButton_7_clicked();void on_pushButton_8_clicked();void on_pushButton_SetTCP_clicked();void on_pushButton_SetHttp_clicked();void on_pushButton_16_clicked();void on_PBClear_2_clicked();void on_radioButton_IP_toggled(bool checked);void on_pushButton_SetUp_clicked();void on_pushButton_Read_clicked();private:Ui::MainWindow *ui;QUdpSocket * udpSocket;
};
#endif // MAINWINDOW_H#include "mainwindow.h"
#include "ui_mainwindow.h"
#include <QDebug>
#include "QMessageBox"
#include <QUdpSocket>
#include <exception>
#include <QByteArray>
#include <QString>
#include <string>
#include <QTime>
#include <QStringList>
#include <QClipboard>bool listening=false; //sock侦听标志
QByteArray sendData; //发送数据缓冲
unsigned char readcardbuf[1024]; //接收M1卡扇区数据缓冲//获取本机所有网卡IP------------------------------------------------------------------------------------------------------
QStringList getAllIPAddresses() {QStringList ips;QList<QHostAddress> list = QNetworkInterface::allAddresses();for (int i = 0; i < list.size(); ++i) {QHostAddress address = list.at(i);// 检查是否为IPv4地址，并排除回环地址if (address.protocol() == QAbstractSocket::IPv4Protocol && address != QHostAddress::LocalHost) {ips << address.toString();}}return ips;
}//判断IP地址是否合法---------------------------------------------------------------------------------------------------------
bool isValidIP(const QString &ip) {QHostAddress address(ip);return address.protocol() != QAbstractSocket::UnknownNetworkLayerProtocol;
}//判断是否有效MAC------------------------------------------------------------------------------------------------------------
bool isValidMac(const QString &mac) {try{QStringList liststr = mac.split("-");for (int i=0 ;i<6;i++){bool ok;quint8 macb =liststr[i].toInt(&ok,16);if (!ok){return false;}}return true;}catch (QException& e) {return false;}
}//根据IP地址获取MAC----------------------------------------------------------------------------------------------------------
QString getMacByIp(const QString &ip) {QHostInfo info = QHostInfo::fromName(ip);foreach (const QHostAddress &address, info.addresses()) {if (address.protocol() == QAbstractSocket::IPv4Protocol) {foreach (const QNetworkInterface &interface, QNetworkInterface::allInterfaces()) {if (interface.flags().testFlag(QNetworkInterface::IsUp) && interface.flags().testFlag(QNetworkInterface::IsRunning)) {foreach (const QNetworkAddressEntry &entry, interface.addressEntries()) {if (entry.ip() == address) {return interface.hardwareAddress();}}}}}}return QString();
}//获取系统现时间-------------------------------------------------------------------------------------------------------------
QString getsystime(){QTime time = QTime::currentTime();QString timeStr = time.toString("hh:mm:ss.zzz");return timeStr;
}//获取系统日期时间-------------------------------------------------------------------------------------------------------------
QString getsysdatetime(){QDateTime currentDateTime = QDateTime::currentDateTime();QString dateTimeString = currentDateTime.toString("yy-MM-dd hh:mm:ss");return dateTimeString;
}//QByteArray转16进制QString------------------------------------------------------------------------------------------------
QString ByteArrayToHexString(QByteArray data){QString ret(data.toHex().toUpper());int len = ret.length()/2;for(int i=1;i<len;i++){ret.insert(2*i+i-1," ");}return ret;
}//检测输入数据是否为16进制数,将正确的16进制字符存入数组，并返回长度--------------------------------------------------------------------
static int checkhexdata(QString inputstr,unsigned char *databuf){QChar ch;QString writinf = inputstr.trimmed();QString writinf1 = "";int m = 0;int n = 0;char s;if(writinf.length()<1){return -1;}ch = writinf.at(0);s = writinf.at(0).toLatin1();for(int i=0; i<writinf.length() ; i++){ch = writinf.at(i);s = writinf.at(i).toLatin1();if((('0' <= s) && (s <= '9')) || (('A' <= s) && (s <= 'F')) || (('a' <= s) && (s <= 'f'))){writinf1 += ch;n++;if(n==2){bool ok;databuf[m++] = writinf1.toInt(&ok,16);writinf1 = "";n = 0;}}else if(s == ' '){}}return m;
}MainWindow::MainWindow(QWidget *parent): QMainWindow(parent), ui(new Ui::MainWindow)
{ ui->setupUi(this);ui->TEPort->setPlainText("39169"); //出厂默认39169端口ui->textEdit_remoiport->setText("255.255.255.255:39169");ui->textEdit_DeviceNumber->setText("00000");ui->textEdit_tts->setText("欢迎您使用我们的网络读卡器！");ui->textEdit_disp->setText("欢迎您使用我们的网络读卡器!");ui->spinBox_dispdelay->setValue(5);ui->spinBox_swit->setValue(30);ui->spinBox_voice->setValue(8);ui->textEdit_M1UID->setText("00000000");ui->textEdit_authkey->setText("FFFFFFFFFFFF");ui->textEdit_newkey->setText("FF FF FF FF FF FF FF 07 80 69 FF FF FF FF FF FF");ui->scrollArea->setVisible(false); ui->scrollArea->move(180,40);ui->scrollArea_wifi->setVisible(false);ui->scrollArea_wifi->move(250,130);ui->groupBox_dhcp->setVisible(false);QStringList ips = getAllIPAddresses(); foreach (QString ip, ips) {ui->CBIP->addItem(ip);}if(ui->CBIP->count()<1){QMessageBox::information(NULL, "提示", "未搜索到本机的网卡，系统不能正常运行！");delete ui;}sockinit();
}MainWindow::~MainWindow()
{delete ui;
}//通讯报文显示-----------------------------------------------------------------------------------------------------
void MainWindow::listadditems(int ctr,QString listinfo){switch (ctr){case 0:if(ui->listWidget->count()>10){ui->listWidget->clear();}ui->listWidget->addItem(listinfo);ui->listWidget->setCurrentRow(ui->listWidget->count()-1);break;case 1:ui->textEdit_msg->setText(listinfo);}
}//广播发送搜索所有在线的设备-------------------------------------------------------------------------------------------
void MainWindow::on_PBSearch_clicked()
{int n = ui->tableWidget->rowCount();//总行数for (int i = 0;i <= n;i++)ui->tableWidget->removeRow(0);//遍历删除第0行QHostAddress broadcastAddress("255.255.255.255");quint16 port1 = 39169;sendData.clear();sendData.append(0xA6);udpSocket->writeDatagram(sendData.constData(), sendData.size(), QHostAddress::Broadcast, port1); //搜索所有在线设备QString dispinf=getsystime()+" Send To: "+("255.255.255.255:"+QString::number(port1)+" ").mid(0,22)+"A6" ;listadditems(0,dispinf);sendData.clear();sendData.append(0xA8);udpSocket->writeDatagram(sendData.constData(), sendData.size(), QHostAddress::Broadcast, port1); //查询在线设备型号、固件日期dispinf=getsystime()+" Send To: "+("255.255.255.255:"+QString::number(port1)+" ").mid(0,22)+"A8" ;listadditems(0,dispinf);
}void MainWindow::sockinit(){ //初始化Socket UDP侦听端口try{if(!listening){QString ipstr=ui->CBIP->currentText();QHostAddress localeip(ipstr);quint16 port=ui->TEPort->toPlainText().toUInt();udpSocket =new QUdpSocket(this);udpSocket->bind(localeip,port); //udpSocket->bind(QHostAddress::Any,port); 这个方式是绑定所有网卡,这样发不出广播包connect(udpSocket, &QUdpSocket::readyRead, this,&MainWindow::read_data);listening=true;listadditems(0,getsystime()+" Sock已启动侦听"+ipstr+":"+ui->TEPort->toPlainText());}}catch(_exception){listening=false;udpSocket->close();listadditems(0,getsystime()+" Sock侦听已关闭！");}
}//Socket UDP端口接收数据---------------------------------------------------------------------------------------------------------
void MainWindow::read_data(){unsigned char databuff[1024] = {0};QHostAddress ip;quint16 port;qint64 buflen = udpSocket->readDatagram((char *)databuff, sizeof(databuff), &ip, &port);QString str;for (int i = 0; i < buflen; i++){str +=QString::asprintf("%02X ", databuff[i]);} QString dispinf=getsystime()+" Receive: "+(ip.toString()+":"+QString::number(port)+" ").mid(0,22)+str ;listadditems(0,dispinf);switch (databuff[0]){case 0xc1:Analyze_c1(ip, port,databuff,buflen); //解析读取IC卡卡号break;case 0xc3:Analyze_c3(ip, port,databuff,buflen); //主动读取M1卡扇区数据的返回break;case 0xc5:Analyze_c5(ip, port,databuff,buflen); //指定区号密钥读取M1扇区数据返回break;case 0xcd:Analyze_cd(ip, port,databuff,buflen); //指定区号密钥写数据到M1卡扇区返回break;case 0xd1:Analyze_d1(ip, port,databuff,buflen); //解析读取ID卡卡号break;case 0xcf:case 0xdf:Analyze_cf_df(ip, port,databuff,buflen); //解析IC、ID卡离开读卡器break;case 0xf2:Analyze_f2(ip, port,databuff,buflen); //在线设备响应搜索指令的返回、读卡器上电开机上传设备信息break;case 0xf6:Analyze_f6(ip, port,databuff,buflen); //在线设备响应查询型号、固件日期指令的返回break;case 0xa4:Analyze_a4(ip, port,databuff,buflen); //查询WIFI叁数的返回break;default:break;}
}//确认接收到的信息----------------------------------------------------------------------------------------------------------------
void MainWindow::DisableSendAgain(QHostAddress ip,quint16 port,unsigned char databuff[], qint64 buflen)
{QString SendHex=getsystime()+" Send To: "+(ip.toString()+":"+QString::number(port)+" ").mid(0,22)+"69 " ;sendData.clear();sendData.append(0x69);for (int i=1;i<9;i++){sendData.append(databuff[i]);SendHex=SendHex+QString::asprintf("%02X ", databuff[i]);}udpSocket->writeDatagram(sendData.constData(), sendData.size(), QHostAddress(ip), port); listadditems(0,SendHex+" 确定接收，不要再次发送此帧数据啦...");
}//解析读取IC卡卡号-------------------------------------------------------------------------------------------------------------------
void MainWindow::Analyze_c1(QHostAddress ip,quint16 port,unsigned char databuff[], qint64 buflen)
{DisableSendAgain(ip, port,databuff,buflen);//确认接收到的信息，否则同一信息读卡器会重发三次QString IPAddress=QString::asprintf("%d", databuff[1])+"."+QString::asprintf("%d", databuff[2])+"."+QString::asprintf("%d", databuff[3])+"."+QString::asprintf("%d", databuff[4]); //设备IP地址,广域网上使用，一般不对此IP回应，而是对数据流的 ip及端口 回应QString DeviceNumber=QString::asprintf("%05d",databuff[5]+databuff[6]*256); //设备自编机号QString FrameNumber=QString::asprintf("%05d",databuff[7]+databuff[8]*256); //数据包号QString CardnoHexZ=QString::asprintf("%02X%02X%02X%02X", databuff[10],databuff[11],databuff[12],databuff[13]); //16进制卡号正码QString CardnoHexF=QString::asprintf("%02X%02X%02X%02X", databuff[13],databuff[12],databuff[11],databuff[10]); //16进制卡号反码bool status;QString Cardno8H10D=QString::asprintf("%010u",CardnoHexF.toUInt(&status,16)); //转8H10D反码卡号QString SerialNumber=""; //设备全球唯一硬件序号for (int i=14;i<buflen;i++){SerialNumber=SerialNumber+QString::asprintf("%02X", databuff[i]);}QString DispInf="读取M1卡号,设备IP:"+IPAddress+",机号:"+DeviceNumber+",数据包号:"+FrameNumber+",16进制卡号:"+CardnoHexZ+",转8H10D反码:"+Cardno8H10D+",设备全球唯一序号:"+SerialNumber;listadditems(1,DispInf);ui->textEdit_M1UID->setText(CardnoHexZ);if(ui->checkBox_Resp->isChecked()){Respondinfo(getsysdatetime()+"卡号:"+Cardno8H10D,ip,port,DeviceNumber);} //回应驱动设备显示+蜂鸣响声
}//主动读取扇区数据的返回--------------------------------------------------------------------------------------------------------------
void MainWindow::Analyze_c3(QHostAddress ip,quint16 port,unsigned char databuff[], qint64 buflen)
{QString IPAddress=QString::asprintf("%d", databuff[1])+"."+QString::asprintf("%d", databuff[2])+"."+QString::asprintf("%d", databuff[3])+"."+QString::asprintf("%d", databuff[4]); //设备IP地址,广域网上使用，一般不对此IP回应，而是对数据流的 ip及端口 回应QString DeviceNumber=QString::asprintf("%05d",databuff[5]+databuff[6]*256); //设备自编机号QString CardnoHex="";for (int i=12;i<16;i++){CardnoHex=CardnoHex+QString::asprintf("%02X", databuff[i]);}int j=databuff[10]*48;int m=databuff[11]*48;for(int i=0;i<m;i++){readcardbuf[j+1]=databuff[16+i];}if((databuff[10]+databuff[11])>=databuff[9]){m=databuff[9]*48;QString DataHex="";for (int i=0;i<m;i++){DataHex=DataHex+QString::asprintf("%02X ",readcardbuf[i]);}ui->textEdit_data->setPlainText(DataHex);QString DispInf="读取M1卡扇区数据成功，设备IP："+IPAddress+",机号："+DeviceNumber+",16进制卡号："+CardnoHex;listadditems(1,DispInf);ui->textEdit_M1UID->setText(CardnoHex);if(ui->checkBox_Resp->isChecked()){Respondinfo(getsysdatetime()+"卡号:"+CardnoHex,ip,port,DeviceNumber);} //回应驱动设备显示+蜂鸣响声}
}//指定区号密钥读取M1扇区数据返回-----------------------------------------------------------------------------------------------------------
void MainWindow::Analyze_c5(QHostAddress ip,quint16 port,unsigned char databuff[], qint64 buflen)
{QString IPAddress=QString::asprintf("%d", databuff[1])+"."+QString::asprintf("%d", databuff[2])+"."+QString::asprintf("%d", databuff[3])+"."+QString::asprintf("%d", databuff[4]); //设备IP地址,广域网上使用，一般不对此IP回应，而是对数据流的 ip及端口 回应QString DeviceNumber=QString::asprintf("%05d",databuff[5]+databuff[6]*256); //设备自编机号QString CardnoHex=""; QString DispInf="";for (int i=8;i<12;i++){CardnoHex=CardnoHex+QString::asprintf("%02X", databuff[i]);}QString Sector=QString::asprintf("%d", databuff[12]); //扇区号DispInf="读取M1卡"+Sector+"扇区数据";switch (databuff[13]){case 0:{QString DataHex="";for (int i=0;i<48;i++){DataHex=DataHex+QString::asprintf("%02X ", databuff[i]);}DispInf=DispInf+"成功,设备IP:"+IPAddress+",机号:"+DeviceNumber+",16进制卡号:"+CardnoHex;ui->textEdit_data->setPlainText(DataHex);break;}case 8:DispInf=DispInf+"失败,设备IP:"+IPAddress+",机号:"+DeviceNumber+",没有卡片在感应区！";break;case 12:DispInf=DispInf+"失败,设备IP:"+IPAddress+",机号:"+DeviceNumber+",16进制卡号:"+CardnoHex+",卡密码认证失败！";break;default:DispInf=DispInf+"失败,设备IP:"+IPAddress+",机号:"+DeviceNumber+",错误代码："+QString::asprintf("%d", databuff[13]);break;}listadditems(1,DispInf);ui->textEdit_M1UID->setText(CardnoHex);if(ui->checkBox_Resp->isChecked()){Respondinfo(DispInf,ip,port,DeviceNumber);} //回应驱动设备显示+蜂鸣响声
}//指定区号密钥写数据到M1卡扇区返回状态---------------------------------------------------------------------------------------------------------
void MainWindow::Analyze_cd(QHostAddress ip,quint16 port,unsigned char databuff[], qint64 buflen)
{QString IPAddress=QString::asprintf("%d", databuff[2])+"."+QString::asprintf("%d", databuff[3])+"."+QString::asprintf("%d", databuff[4])+"."+QString::asprintf("%d", databuff[5]); //设备IP地址,广域网上使用，一般不对此IP回应，而是对数据流的 ip及端口 回应QString DeviceNumber=QString::asprintf("%05d",databuff[6]+databuff[7]*256); //设备自编机号QString CardnoHex="";for (int i=9;i<13;i++){CardnoHex=CardnoHex+QString::asprintf("%02X", databuff[i]); //16进制卡号}QString Sector=QString::asprintf("%d", databuff[13]); //扇区号QString Pages=QString::asprintf("%d", databuff[8]); //本次操作的扇区总数QString DispInf="";if(databuff[1]==0x3a){DispInf="修改M1卡"+Sector+"扇区密钥";}else if(databuff[1]==0x3d){DispInf="写数据到M1卡"+Sector+"扇区";}switch (databuff[14]){case 0:DispInf=DispInf+"成功,设备IP:"+IPAddress+",机号:"+DeviceNumber+",16进制卡号:"+CardnoHex;break;case 8:DispInf=DispInf+"失败,设备IP:"+IPAddress+",机号:"+DeviceNumber+",没有卡片在感应区！";break;case 12:DispInf=DispInf+"失败,设备IP:"+IPAddress+",机号:"+DeviceNumber+",16进制卡号:"+CardnoHex+",卡密码认证失败！";break;default:DispInf=DispInf+"失败,设备IP:"+IPAddress+",机号:"+DeviceNumber+",错误代码："+QString::asprintf("%d", databuff[13]);break;}listadditems(1,DispInf);if(ui->checkBox_Resp->isChecked()){Respondinfo(DispInf,ip,port,DeviceNumber);} //回应驱动设备显示+蜂鸣响声
}//解析读取ID卡卡号-----------------------------------------------------------------------------------------------------------------------
void MainWindow::Analyze_d1(QHostAddress ip,quint16 port,unsigned char databuff[], qint64 buflen)
{DisableSendAgain(ip, port,databuff,buflen);//确认接收到的信息，否则同一信息读卡器会重发三次QString IPAddress=QString::asprintf("%d", databuff[1])+"."+QString::asprintf("%d", databuff[2])+"."+QString::asprintf("%d", databuff[3])+"."+QString::asprintf("%d", databuff[4]); //设备IP地址,广域网上使用，一般不对此IP回应，而是对数据流的 ip及端口 回应QString DeviceNumber=QString::asprintf("%05d",databuff[5]+databuff[6]*256); //设备自编机号QString FrameNumber=QString::asprintf("%05d",databuff[7]+databuff[8]*256); //数据包号QString CardnoHexZ=QString::asprintf("%02X%02X%02X%02X%02X", databuff[9],databuff[10],databuff[11],databuff[12],databuff[13]); //16进制卡号正码，databuff[13]为厂商代码QString CardnoHexF=QString::asprintf("%02X%02X%02X%02X", databuff[12],databuff[11],databuff[10],databuff[9]); //16进制卡号反码,databuff[13]为厂商代码bool status;QString Cardno8H10D=QString::asprintf("%010u",CardnoHexF.toUInt(&status,16)); //转8H10D反码卡号QString SerialNumber=""; //设备全球唯一硬件序号for (int i=14;i<buflen;i++){SerialNumber=SerialNumber+QString::asprintf("%02X", databuff[i]);}QString DispInf="读取ID卡号,设备IP:"+IPAddress+",机号:"+DeviceNumber+",数据包号:"+FrameNumber+",16进制卡号:"+CardnoHexZ+",转8H10D反码:"+Cardno8H10D+",设备全球唯一序号:"+SerialNumber;listadditems(1,DispInf);if(ui->checkBox_Resp->isChecked()){Respondinfo(getsysdatetime()+"卡号:"+Cardno8H10D,ip,port,DeviceNumber);} //回应驱动设备显示+蜂鸣响声
}//解析IC\ID卡离开读卡器-----------------------------------------------------------------------------------------------------------------------------------
void MainWindow::Analyze_cf_df(QHostAddress ip,quint16 port,unsigned char databuff[], qint64 buflen)
{DisableSendAgain(ip, port,databuff,buflen);//确认接收到的信息，否则同一信息读卡器会重发三次QString IPAddress=QString::asprintf("%d", databuff[1])+"."+QString::asprintf("%d", databuff[2])+"."+QString::asprintf("%d", databuff[3])+"."+QString::asprintf("%d", databuff[4]); //设备IP地址,广域网上使用，一般不对此IP回应，而是对数据流的 ip及端口 回应QString DeviceNumber=QString::asprintf("%05d",databuff[5]+databuff[6]*256); //设备自编机号QString FrameNumber=QString::asprintf("%05d",databuff[7]+databuff[8]*256); //数据包号int infotype=databuff[9]; //数据说明，1表示只读取UID卡号int cardnolen=databuff[10]; //UID卡号长度QString CardnoHexZ=""; //16进制卡号正码for (int i=0;i<cardnolen;i++){CardnoHexZ=CardnoHexZ+QString::asprintf("%02X", databuff[11+i]);}QString CardnoHexF=CardnoHexZ.mid(6,2)+CardnoHexZ.mid(4,2)+CardnoHexZ.mid(2,2)+CardnoHexZ.mid(0,2); //16进制卡号反码bool status;QString Cardno8H10D=QString::asprintf("%010u",CardnoHexF.toUInt(&status,16)); //转8H10D反码卡号QString SerialNumber=""; //设备全球唯一硬件序号for (int i=11+cardnolen;i<buflen;i++){SerialNumber=SerialNumber+QString::asprintf("%02X", databuff[i]);}QString DispInf="";if(databuff[0]==0xcf){DispInf="M1卡离开读卡器,";}else{DispInf="ID卡离开读卡器,";}DispInf=DispInf+"设备IP:"+IPAddress+",机号:"+DeviceNumber+",数据包号:"+FrameNumber+",16进制卡号:"+CardnoHexZ+",转8H10D反码:"+Cardno8H10D+",设备全球唯一序号:"+SerialNumber;listadditems(1,DispInf);
}//在线设备响应搜索指令的返回、读卡器上电开机上传设备信息-------------------------------------------------------------------------------------------------------------------
void MainWindow::Analyze_f2(QHostAddress ip,quint16 port,unsigned char databuff[], qint64 buflen)
{QString IPAddress=QString::asprintf("%d", databuff[1])+"."+QString::asprintf("%d", databuff[2])+"."+QString::asprintf("%d", databuff[3])+"."+QString::asprintf("%d", databuff[4]); //设备IPQString mask=QString::asprintf("%d", databuff[5])+"."+QString::asprintf("%d", databuff[6])+"."+QString::asprintf("%d", databuff[7])+"."+QString::asprintf("%d", databuff[8]); //设备掩码QString PortStr=QString::asprintf("%05d",databuff[9]+databuff[10]*256); //通讯端口QString DeviceNumber=QString::asprintf("%05d",databuff[11]+databuff[12]*256); //设备自编机号QString GetWay=QString::asprintf("%d", databuff[13])+"."+QString::asprintf("%d", databuff[14])+"."+QString::asprintf("%d", databuff[15])+"."+QString::asprintf("%d", databuff[16]); //设备网关QString GetWayMAC=QString::asprintf("%02X", databuff[17])+"-"+QString::asprintf("%02X", databuff[18])+"-"+QString::asprintf("%02X", databuff[19])+"-"+QString::asprintf("%02X", databuff[20])+"-"+QString::asprintf("%02X", databuff[21])+"-"+QString::asprintf("%02X", databuff[22]); //设备网关MACQString ServerIp=QString::asprintf("%d", databuff[23])+"."+QString::asprintf("%d", databuff[24])+"."+QString::asprintf("%d", databuff[25])+"."+QString::asprintf("%d", databuff[26]); //远程服务器IPQString ServerMAC=QString::asprintf("%02X", databuff[27])+"-"+QString::asprintf("%02X", databuff[28])+"-"+QString::asprintf("%02X", databuff[29])+"-"+QString::asprintf("%02X", databuff[30])+"-"+QString::asprintf("%02X", databuff[31])+"-"+QString::asprintf("%02X", databuff[32]); //远程服务器MACQString MACPara=QString::asprintf("%d", databuff[33]); //MAC获取方式QString NetPara=QString::asprintf("%d", databuff[34]); //设备参数QString ModuleNumber=QString::asprintf("%d", databuff[35])+"-"+QString::asprintf("%d", databuff[36])+"-"+QString::asprintf("%d", databuff[37])+"-"+QString::asprintf("%d", databuff[38]); //网络模块编号QString STMAC="16-88-"+QString::asprintf("%02X", databuff[35])+"-"+QString::asprintf("%02X", databuff[36])+"-"+QString::asprintf("%02X", databuff[37])+"-"+QString::asprintf("%02X", databuff[38]); //STC版设备MACQString CHMAC=""; //CH系列设备MACQString SerialNumber=""; //唯一设备硬件序号for (int i=39;i<buflen;i++){SerialNumber=SerialNumber+QString::asprintf("%02X", databuff[i]);if (i<45){CHMAC=QString::asprintf("%02X", databuff[i])+CHMAC;if(i<44){CHMAC="-"+CHMAC;}}}int row = 0;ui->tableWidget->insertRow(row);QTableWidgetItem* item = new QTableWidgetItem;item->setText(DeviceNumber);ui->tableWidget->setItem(row,0, item);item = new QTableWidgetItem;item->setText(IPAddress);ui->tableWidget->setItem(row,1, item);item = new QTableWidgetItem;item->setText(mask);ui->tableWidget->setItem(row,2, item);item = new QTableWidgetItem;item->setText(PortStr);ui->tableWidget->setItem(row,3, item);item = new QTableWidgetItem;item->setText(GetWay);ui->tableWidget->setItem(row,4, item);item = new QTableWidgetItem;item->setText(GetWayMAC);ui->tableWidget->setItem(row,5, item);item = new QTableWidgetItem;item->setText(ServerIp);ui->tableWidget->setItem(row,6, item);item = new QTableWidgetItem;item->setText(ServerMAC);ui->tableWidget->setItem(row,7, item);item = new QTableWidgetItem;item->setText(MACPara);ui->tableWidget->setItem(row,8, item);item = new QTableWidgetItem;item->setText(NetPara);ui->tableWidget->setItem(row,9, item);item = new QTableWidgetItem;item->setText(ModuleNumber);ui->tableWidget->setItem(row,10, item);item = new QTableWidgetItem;item->setText(STMAC);ui->tableWidget->setItem(row,11, item);item = new QTableWidgetItem;item->setText(SerialNumber);ui->tableWidget->setItem(row,12, item);item = new QTableWidgetItem;item->setText(CHMAC);ui->tableWidget->setItem(row,13, item);for (int i=0;i<=13;i++){ui->tableWidget->resizeColumnToContents(i); //自动列宽}
}//响应查询设备型号固件日期指令的返回---------------------------------------------------------------------------------------------------
void MainWindow::Analyze_f6(QHostAddress ip,quint16 port,unsigned char databuff[], qint64 buflen)
{QString IPAddress=QString::asprintf("%d", databuff[1])+"."+QString::asprintf("%d", databuff[2])+"."+QString::asprintf("%d", databuff[3])+"."+QString::asprintf("%d", databuff[4]); //设备IPQString DeviceNumber=QString::asprintf("%05d",databuff[5]+databuff[6]*256); //设备自编机号int NameLen=databuff[7]; //设备型号名称长度QByteArray namebuf; //设备型号for (int i=0;i<NameLen;i++){namebuf.append(databuff[8+i]);}QString namestr=namebuf;int VersionDateLen=databuff[8 + NameLen]; //固件日期长度QByteArray verbuf; //固件日期for (int i=0;i<VersionDateLen;i++){verbuf.append(databuff[8 + NameLen + 1+i]);}QString verdatestr=verbuf;int rowCount = ui->tableWidget->rowCount();for (int row = 0; row < rowCount; ++row) {QTableWidgetItem *item = ui->tableWidget->item(row, 1);QString ipstr = item->text();if (IPAddress==ipstr){item = new QTableWidgetItem;item->setText(namestr);ui->tableWidget->setItem(row,14, item);ui->tableWidget->resizeColumnToContents(14); //自动列宽item = new QTableWidgetItem;item->setText(verdatestr);ui->tableWidget->setItem(row,15, item);ui->tableWidget->resizeColumnToContents(15); //自动列宽return;}}
}//查询wifi连接状态---------------------------------------------------------------------------------------------------------------------
void MainWindow::Analyze_a4(QHostAddress ip,quint16 port,unsigned char databuff[], qint64 buflen)
{QString IPAddress=QString::asprintf("%d", databuff[7])+"."+QString::asprintf("%d", databuff[8])+"."+QString::asprintf("%d", databuff[9])+"."+QString::asprintf("%d", databuff[10]); //设备IP地址,广域网上使用，一般不对此IP回应，而是对数据流的 ip及端口 回应ui->listWidget_wifi->addItem("WIFI的IP地址:"+IPAddress);QString mask=QString::asprintf("%d", databuff[11])+"."+QString::asprintf("%d", databuff[12])+"."+QString::asprintf("%d", databuff[13])+"."+QString::asprintf("%d", databuff[14]); //设备掩码ui->listWidget_wifi->addItem("WIFI子网掩码:"+mask);QString MACStr=QString::asprintf("%02X", databuff[15])+"-"+QString::asprintf("%02X", databuff[16])+"-"+QString::asprintf("%02X", databuff[17])+"-"+QString::asprintf("%02X", databuff[18])+"-"+QString::asprintf("%02X", databuff[19])+"-"+QString::asprintf("%02X", databuff[20]); //MAC地址ui->listWidget_wifi->addItem("WIFI_MAC地址:"+MACStr);QString GateWay=QString::asprintf("%d", databuff[21])+"."+QString::asprintf("%d", databuff[22])+"."+QString::asprintf("%d", databuff[23])+"."+QString::asprintf("%d", databuff[24]); //设备网关ui->listWidget_wifi->addItem("WIFI网关地址:"+GateWay);QString GatewayMAC=QString::asprintf("%02X", databuff[25])+"-"+QString::asprintf("%02X", databuff[26])+"-"+QString::asprintf("%02X", databuff[27])+"-"+QString::asprintf("%02X", databuff[28])+"-"+QString::asprintf("%02X", databuff[29])+"-"+QString::asprintf("%02X", databuff[30]); //网关MACui->listWidget_wifi->addItem("网关 MAC地址:"+GatewayMAC);switch (databuff[31]){case 0:ui->listWidget_wifi->addItem("WIFI网络状态:已连接wifi");break;case 1:ui->listWidget_wifi->addItem("WIFI网络状态:连接失败！");break;case 2:ui->listWidget_wifi->addItem("WIFI网络状态:已初始化！");break;default:ui->listWidget_wifi->addItem("WIFI网络状态:未初始化！");break;}QByteArray devname;for(int i=0 ;i<databuff[32];i++){devname.append(databuff[34+i]);}QString devnamestr=devname;ui->listWidget_wifi->addItem("读卡器 名称:"+devnamestr);QByteArray wifname;for(int i=0 ;i<databuff[33];i++){wifname.append(databuff[44+i]);}QString wifinamestr=wifname;ui->listWidget_wifi->addItem("WIFI热点名称:"+wifinamestr);
}//更换不同的网卡----------------------------------------------------------------------------------------------------
void MainWindow::on_CBIP_currentIndexChanged(int index)
{if (listening){disconnect(udpSocket, &QUdpSocket::readyRead, this,&MainWindow::read_data);udpSocket->close();listening=false;listadditems(0,getsystime()+" Sock侦听已关闭！");}sockinit();
}void MainWindow::on_PBClear_clicked()
{ui->listWidget->clear();ui->textEdit_msg->setText("");
}//在在线设备列表中选取一台设备IP端口
void MainWindow::on_tableWidget_cellClicked(int row, int column)
{int currentRow = ui->tableWidget->currentIndex().row();QString DeviceNumber = ui->tableWidget->item(currentRow,0)->text();QString IPAddress= ui->tableWidget->item(currentRow,1)->text();QString PortStr= ui->tableWidget->item(currentRow,3)->text();ui->textEdit_DeviceNumber->setText(DeviceNumber);ui->textEdit_remoiport->setText(IPAddress+":"+PortStr);ui->New_Nember->setText(DeviceNumber);ui->New_IP->setText(IPAddress);ui->New_ServerIP->setText( ui->tableWidget->item(currentRow,6)->text());ui->ServerMAC->setText( ui->tableWidget->item(currentRow,7)->text());ui->New_Mask->setText( ui->tableWidget->item(currentRow,2)->text());ui->New_Gateway->setText( ui->tableWidget->item(currentRow,4)->text());ui->GateWayMac->setText( ui->tableWidget->item(currentRow,5)->text());ui->New_Port->setText( ui->tableWidget->item(currentRow,3)->text());ui->Serial_Number->setText( ui->tableWidget->item(currentRow,10)->text());quint8 functionid=ui->tableWidget->item(currentRow,9)->text().toInt();if((functionid % 2)>0){ui->checkBox_beep->setChecked(true);}else{ui->checkBox_beep->setChecked(false);}functionid=functionid/2;if((functionid % 2)>0){ui->checkBox_dhcp->setChecked(true);}else{ui->checkBox_dhcp->setChecked(false);}functionid=functionid/2;ui->comboBox_out->setCurrentIndex(functionid % 2);functionid=functionid/2;functionid=functionid % 8;if (functionid<=4){ui->comboBox_in->setCurrentIndex(functionid);}else{ui->comboBox_in->setCurrentIndex(0);}quint8 automac=ui->tableWidget->item(currentRow,8)->text().toInt();switch (automac){case 0:ui->radioButton1->setChecked(false);ui->radioButton2->setChecked(true);ui->radioButton3->setChecked(false);ui->radioButton4->setChecked(true);break;case 1:ui->radioButton1->setChecked(true);ui->radioButton2->setChecked(false);ui->radioButton3->setChecked(false);ui->radioButton4->setChecked(true);break;case 2:ui->radioButton1->setChecked(false);ui->radioButton2->setChecked(true);ui->radioButton3->setChecked(true);ui->radioButton4->setChecked(false);break;default:ui->radioButton1->setChecked(true);ui->radioButton2->setChecked(false);ui->radioButton3->setChecked(true);ui->radioButton4->setChecked(false);break;}
}void MainWindow::on_PBEditpara_clicked()
{int currentRow = ui->tableWidget->currentIndex().row();if (currentRow<0){QMessageBox::critical(this, "警告", "请选择一台在线设备再执行此功能！", QMessageBox::Ok);}else{ui->scrollArea_wifi->setVisible(false);ui->scrollArea->setVisible(true);}
}//将sendData缓冲数据发送到指定的设备IP端口---------------------------------------------------------------------------------------
void MainWindow:: SendBuffAct()
{QString RemoIPort=ui->textEdit_remoiport->toPlainText();QStringList liststr = RemoIPort.split(":");QHostAddress Remoip(liststr[0]);quint16 Remoport=liststr[1].toUInt();udpSocket->writeDatagram(sendData.constData(), sendData.size(), QHostAddress(Remoip), Remoport);QString SendHex=getsystime()+" Send To: "+(Remoip.toString()+":"+QString::asprintf("%d",Remoport)+" ").mid(0,22);SendHex=SendHex+ByteArrayToHexString(sendData);listadditems(0,SendHex);
}//驱动设备蜂鸣响声+文字显示-------------------------------------------------------------------------------------------------
void MainWindow::on_PBSendDispBeep_clicked()
{sendData.clear();sendData.append(0x5A); //功能码quint16 devno=ui->textEdit_DeviceNumber->toPlainText().toUInt();sendData.append(devno % 256); //机号低位sendData.append(devno / 256); //机号高位，高低位都为0表示所有机sendData.append(ui->CBbeep->currentIndex()); //蜂鸣响声代码，255表示不响声sendData.append(ui->spinBox_dispdelay->value()); //文字显示时长，QString dispstr=ui->textEdit_disp->toPlainText()+" "; //加空格是为了确保满屏34位显示QByteArray Dispbyte=dispstr.toLocal8Bit();for(int i=0;i<34;i++){sendData.append(Dispbyte[i]);}SendBuffAct(); //将sendData缓冲数据发送到指定的设备IP端口
}//驱动设备蜂鸣响声-----------------------------------------------------------------------------------------------------------
void MainWindow::on_PBbeep_clicked()
{sendData.clear();sendData.append(0x96); //功能码quint16 devno=ui->textEdit_DeviceNumber->toPlainText().toUInt();sendData.append(devno % 256); //机号低位sendData.append(devno / 256); //机号高位，高低位都为0表示所有机sendData.append(ui->CBbeep->currentIndex()); //蜂鸣响声代码SendBuffAct(); //将sendData缓冲数据发送到指定的设备IP端口
}//驱动设备开启继电器----------------------------------------------------------------------------------------------------------
void MainWindow::on_PBSwitchOn_clicked()
{sendData.clear();sendData.append(0x78); //功能码quint16 devno=ui->textEdit_DeviceNumber->toPlainText().toUInt();sendData.append(devno % 256); //机号低位sendData.append(devno / 256); //机号高位，高低位都为0表示所有机QString swithno="F"+QString::asprintf("%d",ui->CBSwitch->currentIndex());bool status;sendData.append(swithno.toUInt(&status,16)); //选择继电器quint16 deltime=ui->spinBox_swit->value();sendData.append(deltime % 256); //开启延时低位sendData.append(deltime / 256); //开启延时高位SendBuffAct(); //将sendData缓冲数据发送到指定的设备IP端口
}//驱动设备关闭继电器----------------------------------------------------------------------------------------------------------
void MainWindow::on_PBSwitchOff_clicked()
{sendData.clear();sendData.append(0x78); //功能码quint16 devno=ui->textEdit_DeviceNumber->toPlainText().toUInt();sendData.append(devno % 256); //机号低位sendData.append(devno / 256); //机号高位，高低位都为0表示所有机QString swithno="E"+QString::asprintf("%d",ui->CBSwitch->currentIndex());bool status;sendData.append(swithno.toUInt(&status,16)); //选择继电器quint16 deltime=ui->spinBox_swit->value();sendData.append(deltime % 256); //延时低位sendData.append(deltime / 256); //延时高位SendBuffAct(); //将sendData缓冲数据发送到指定的设备IP端口
}//驱动设备显示文字+蜂鸣响声+播报TTS语音+开启继电器开关------------------------------------------------------------------------------
void MainWindow::on_PBSendDispTTS_clicked()
{if(ui->spinBox_voice->value()>16){ui->spinBox_voice->setValue(16);} //tts最大语音取值16QString strls="[v"+QString::asprintf("%d",ui->spinBox_voice->value())+"]";strls=strls+ui->textEdit_tts->toPlainText().trimmed();QByteArray SpeakArr=strls.toLocal8Bit(); //TS语音转换为Ansi码quint8 speakbytes=SpeakArr.size();quint8 dispbytes=34; //双行显示屏显示长度34，四行屏显示长度72sendData.clear();sendData.append(0x5c); //功能码quint16 devno=ui->textEdit_DeviceNumber->toPlainText().toUInt();sendData.append(devno % 256); //机号低位sendData.append(devno / 256); //机号高位，高低位都为0表示所有机sendData.append(ui->CBbeep->currentIndex()); //蜂鸣响声代码,取值255表示不响QString swithno="F"+QString::asprintf("%d",ui->CBSwitch->currentIndex());bool status;sendData.append(swithno.toUInt(&status,16)); //选择继电器quint16 deltime=ui->spinBox_swit->value();sendData.append(deltime % 256); //延时低位sendData.append(deltime / 256); //延时高位sendData.append(ui->spinBox_dispdelay->value()); //文字显示时长，quint8 begindisp =0; //在显示屏中的哪个位置开始显示，一般取0sendData.append(begindisp);sendData.append(dispbytes); //显示文字长度sendData.append(speakbytes); //tts语音长茺QString dispstr=ui->textEdit_disp->toPlainText()+" "; //加空格是为了确保满屏34位显示QByteArray Dispbyte=dispstr.toLocal8Bit();for(int i=0;i<dispbytes;i++){sendData.append(Dispbyte[i]); //显示信息}for(int i=0;i<speakbytes;i++){sendData.append(SpeakArr[i]); //TTS语音信息}sendData.append(0x55); //防干扰后缀sendData.append(0xaa);sendData.append(0x66);sendData.append(0x99);SendBuffAct(); //将sendData缓冲数据发送到指定的设备IP端口
}//驱动设备显示文字+蜂鸣响声+播报固定组合语音+开启继电器开关------------------------------------------------------------------------------
void MainWindow::on_PBSendDispSpk_clicked()
{QByteArray speakcode; //选择加入要播报的语音代码，最多可加入21个，各语音代码参看 语音列表栏speakcode.append(36);speakcode.append(1);speakcode.append(11);speakcode.append(2);speakcode.append(10);speakcode.append(3);speakcode.append(17);speakcode.append(4);speakcode.append(16);speakcode.append(5);speakcode.append(15);qint8 lensy=speakcode.size(); //语音代码长度quint8 begindisp =0; //在显示屏中的哪个位置开始显示，一般取0quint8 dispbytes=34; //双行显示屏显示长度34sendData.clear();sendData.append(0x5b); //功能码quint16 devno=ui->textEdit_DeviceNumber->toPlainText().toUInt();sendData.append(devno % 256); //机号低位sendData.append(devno / 256); //机号高位，高低位都为0表示所有机sendData.append(ui->CBbeep->currentIndex()); //蜂鸣响声代码,取值255表示不响QString swithno="F"+QString::asprintf("%d",ui->CBSwitch->currentIndex());bool status;sendData.append(swithno.toUInt(&status,16)); //选择继电器quint16 deltime=ui->spinBox_swit->value();sendData.append(deltime % 256); //延时低位sendData.append(deltime / 256); //延时高位sendData.append(ui->spinBox_dispdelay->value()); //文字显示时长，sendData.append(begindisp); //显示起始位置sendData.append(dispbytes); //显示字符串长度sendData.append(lensy); //语音代码条数QString dispstr=ui->textEdit_disp->toPlainText()+" "; //加空格是为了确保满屏34位显示QByteArray Dispbyte=dispstr.toLocal8Bit();for(int i=0;i<dispbytes;i++){sendData.append(Dispbyte[i]); //显示信息}for(int i=0;i<lensy;i++){sendData.append(speakcode[i]); //语音信息}sendData.append(0x55); //防干扰后缀sendData.append(0xaa);sendData.append(0x66);sendData.append(0x99);SendBuffAct(); //将sendData缓冲数据发送到指定的设备IP端口
}//指定扇区密钥读取M1卡扇区数据----------------------------------------------------------------------------------------
void MainWindow::on_PBReadCard_clicked()
{unsigned char cardnobuf[4]; //卡号unsigned char keybuf[6]; //密钥int keylen;int cardnolen;QString cardnostr ="00000000"; // ui->textEdit_M1UID->toPlainText().trimmed(); "00000000"表示可能操作感应区内任意卡，如要操作特定卡可指定卡号cardnolen=checkhexdata(cardnostr,cardnobuf);if(cardnolen<4){QMessageBox::critical(NULL, "提示", "请输入8位正确的16进制卡号！");ui->textEdit_M1UID->setFocus();return;}QString keyinf = ui->textEdit_authkey->toPlainText().trimmed();keylen=checkhexdata(keyinf,keybuf);if(keylen<6){QMessageBox::critical(NULL, "提示", "请输入12位正确的16进制卡密码！");ui->textEdit_authkey->setFocus();return;}sendData.clear();sendData.append(0x3b); //功能码quint16 devno=ui->textEdit_DeviceNumber->toPlainText().toUInt();sendData.append(devno % 256); //机号低位sendData.append(devno / 256); //机号高位，高低位都为0表示所有机sendData.append(0x01); //本次操作的区数for (int i=0 ;i<4;i++){ //指定读写的卡号，全为0 表示可读写任意卡sendData.append(cardnobuf[i]);}sendData.append(ui->CBPage->currentIndex()); //本次操作的扇区号sendData.append(ui->CBauth->currentIndex()); //为1以B密码来验证旧密码，为0以A密码来验证旧密码for (int i=0 ;i<6;i++){sendData.append(keybuf[i]); //认证密钥}SendBuffAct(); //将sendData缓冲数据发送到指定的设备IP端口
}//指定扇区密钥写入数据到M1卡扇区----------------------------------------------------------------------------------------
void MainWindow::on_PBWriteCard_clicked()
{unsigned char cardnobuf[4]; //卡号unsigned char keybuf[6]; //密钥unsigned char databuf[50]; //写卡数据int keylen;int cardnolen;int datalen;QString cardnostr ="00000000"; // ui->textEdit_M1UID->toPlainText().trimmed(); "00000000"表示可能操作感应区内任意卡，如要操作特定卡可指定卡号cardnolen=checkhexdata(cardnostr,cardnobuf);if(cardnolen<4){QMessageBox::critical(NULL, "提示", "请输入8位正确的16进制卡号！");ui->textEdit_M1UID->setFocus();return;}QString keyinf = ui->textEdit_authkey->toPlainText().trimmed();keylen=checkhexdata(keyinf,keybuf);if(keylen<6){QMessageBox::critical(NULL, "提示", "请输入12位正确的16进制卡密码！");ui->textEdit_authkey->setFocus();return;}QString datastr = ui->textEdit_data->toPlainText().trimmed();datalen=checkhexdata(datastr,databuf);if(datalen<48){int answ=QMessageBox::question (this, "警告", "有效的写卡数据不足一扇区48字节，是否要补0写入？", QMessageBox::Ok, QMessageBox::Cancel);if (answ !=1024){ui->textEdit_data->setFocus();return;}}sendData.clear();sendData.append(0x3d); //功能码quint16 devno=ui->textEdit_DeviceNumber->toPlainText().toUInt();sendData.append(devno % 256); //机号低位sendData.append(devno / 256); //机号高位，高低位都为0表示所有机sendData.append(0x01); //本次操作的区数for (int i=0 ;i<4;i++){ //指定读写的卡号，全为0 表示可读写任意卡sendData.append(cardnobuf[i]);}sendData.append(ui->CBPage->currentIndex()); //本次操作的扇区号sendData.append(ui->CBauth->currentIndex()); //为1以B密码来验证旧密码，为0以A密码来验证旧密码for (int i=0 ;i<6;i++){sendData.append(keybuf[i]); //认证密钥}for (int i=0 ;i<48;i++){sendData.append(databuf[i]); //写卡数据}sendData.append(0x55); //防干扰后缀sendData.append(0xaa);sendData.append(0x66);sendData.append(0x99);SendBuffAct(); //将sendData缓冲数据发送到指定的设备IP端口
}//修改M1卡扇区密钥-------------------------------------------------------------------------------------------------
void MainWindow::on_PBChangeKey_clicked()
{int answ=QMessageBox::question (this, "警告", "执行此操作前请记住卡片新密钥，否则卡片将报废！是否继续？", QMessageBox::Ok, QMessageBox::Cancel);if (answ !=1024){ui->textEdit_data->setFocus();return;}unsigned char cardnobuf[4]; //卡号unsigned char keybuf[6]; //密钥unsigned char newkeybuf[20]; //新密钥int keylen;int cardnolen;int newkeylen;QString cardnostr ="00000000"; // ui->textEdit_M1UID->toPlainText().trimmed(); "00000000"表示可能操作感应区内任意卡，如要操作特定卡可指定卡号cardnolen=checkhexdata(cardnostr,cardnobuf);if(cardnolen<4){QMessageBox::critical(NULL, "提示", "请输入8位正确的16进制卡号！");ui->textEdit_M1UID->setFocus();return;}QString keyinf = ui->textEdit_authkey->toPlainText().trimmed();keylen=checkhexdata(keyinf,keybuf);if(keylen<6){QMessageBox::critical(NULL, "提示", "请输入12位正确的16进制卡密码！");ui->textEdit_authkey->setFocus();return;}QString newkey = ui->textEdit_newkey->toPlainText().trimmed();newkeylen=checkhexdata(newkey,newkeybuf);if(newkeylen<16){QMessageBox::critical(NULL, "提示", "请输16进制 6字节A密码+4字节控制位+6字节B密码 ！");ui->textEdit_newkey->setFocus();return;}sendData.clear();sendData.append(0x3a); //功能码quint16 devno=ui->textEdit_DeviceNumber->toPlainText().toUInt();sendData.append(devno % 256); //机号低位sendData.append(devno / 256); //机号高位，高低位都为0表示所有机sendData.append(0x01); //本次操作的区数for (int i=0 ;i<4;i++){ //指定读写的卡号，全为0 表示可读写任意卡sendData.append(cardnobuf[i]);}sendData.append(ui->CBPage->currentIndex()); //本次操作的扇区号quint8 auth=ui->CBauth->currentIndex(); //为1以B密码来验证旧密码，为0以A密码来验证旧密码auth=auth+ui->ChangeKey->currentIndex()*2; //修改A、B、控制位sendData.append(auth);for (int i=0 ;i<6;i++){sendData.append(keybuf[i]); //认证密钥}for (int i=0 ;i<16;i++){sendData.append(newkeybuf[i]); //新A密钥、控制位、B密钥}sendData.append(0x55); //防干扰后缀sendData.append(0xaa);sendData.append(0x66);sendData.append(0x99);SendBuffAct(); //将sendData缓冲数据发送到指定的设备IP端口
}void MainWindow::on_PBSetRW_clicked()
{unsigned char keybuf[6]; //密钥int keylen;QString keyinf = ui->textEdit_authkey->toPlainText().trimmed();keylen=checkhexdata(keyinf,keybuf);if(keylen<6){QMessageBox::critical(NULL, "提示", "请输入12位正确的16进制卡密码！");ui->textEdit_authkey->setFocus();return;}quint8 Sector= ui->CBPage->currentIndex(); //扇区号quint8 pages;int answ=QMessageBox::information (this, "提示", "按 OK 键把读写器设为主动读取"+QString::asprintf("%d",Sector)+"扇区数据，按 No 键将读写器设为只读卡号不读扇区数据，按 Cancel 退出本次操作。", QMessageBox::Ok | QMessageBox::No | QMessageBox::Cancel);if (answ==QMessageBox::No){pages=0;sendData.clear();sendData.append(0x4b); //功能码quint16 devno=ui->textEdit_DeviceNumber->toPlainText().toUInt();sendData.append(devno % 256); //机号低位sendData.append(devno / 256); //机号高位，高低位都为0表示所有机sendData.append(pages); //本次操作的区数sendData.append(0x55); //防干扰后缀sendData.append(0xaa);sendData.append(0x66);sendData.append(0x99);SendBuffAct(); //将sendData缓冲数据发送到指定的设备IP端口}else if(answ==QMessageBox::Ok){pages=1;sendData.clear();sendData.append(0x4b); //功能码quint16 devno=ui->textEdit_DeviceNumber->toPlainText().toUInt();sendData.append(devno % 256); //机号低位sendData.append(devno / 256); //机号高位，高低位都为0表示所有机sendData.append(pages); //主动读取的扇区数，如果要开通几个扇区这里就填几if (ui->CBauth->currentIndex()==0){Sector=Sector+128;}sendData.append(Sector); //扇区号及密码认证类型for (int i=0;i<6;i++){sendData.append(keybuf[i]); //扇区认证密钥} //如果读多个扇区也按此结构加入，可以开通全部的16个扇区sendData.append(0x55); //防干扰后缀sendData.append(0xaa);sendData.append(0x66);sendData.append(0x99);SendBuffAct(); //将sendData缓冲数据发送到指定的设备IP端口}
}void MainWindow::on_PBcopylist_clicked()
{QString listinf;int row=ui->listWidget->count();if (row<1){return;}else{for (int i=0;i<row;i++){QListWidgetItem *item = ui->listWidget->item(i);listinf=listinf+item->text()+"\n";}QClipboard *clipboard = QApplication::clipboard();clipboard->setText(listinf);QMessageBox::information(this, "提示", "显示数据报文已拷贝到剪切板");}
}//接收到刷卡数据立即回应--------------------------------------------------------------------------
void MainWindow::Respondinfo(QString Dispinf,QHostAddress ip,quint16 port,QString DeviceNumber)
{QByteArray RespBuff;RespBuff.append(0x5A); //功能码quint16 devno=DeviceNumber.toUInt();RespBuff.append(devno % 256); //机号低位RespBuff.append(devno / 256); //机号高位，高低位都为0表示所有机RespBuff.append(ui->CBbeep->currentIndex()); //蜂鸣响声代码，255表示不响声RespBuff.append(ui->spinBox_dispdelay->value()); //文字显示时长，QString dispstr=Dispinf+" "; //加空格是为了确保满屏34位显示QByteArray Dispbyte=dispstr.toLocal8Bit();for(int i=0;i<34;i++){RespBuff.append(Dispbyte[i]);}udpSocket->writeDatagram(RespBuff.constData(), RespBuff.size(), QHostAddress(ip), port);QString SendHex=getsystime()+" Send To: "+(ip.toString()+":"+QString::asprintf("%d",port)+" ").mid(0,22);SendHex=SendHex+ByteArrayToHexString(RespBuff);listadditems(0,SendHex);
}void MainWindow::on_pushButton_9_clicked()
{ui->scrollArea->setVisible(false);
}void MainWindow::on_pushButton_clicked()
{ui->New_ServerIP->setText(ui->CBIP->currentText().trimmed());
}void MainWindow::on_pushButton_2_clicked()
{ui->New_ServerIP->setText("255.255.255.255");ui->ServerMAC->setText("FF-FF-FF-FF-FF-FF");ui->radioButton1->setChecked(true);ui->radioButton2->setChecked(false);
}void MainWindow::on_pushButton_4_clicked()
{ui->New_ServerIP->setText("119.29.167.63");ui->ServerMAC->setText("FF-FF-FF-FF-FF-FF");ui->radioButton1->setChecked(true);ui->radioButton2->setChecked(false);
}void MainWindow::on_pushButton_3_clicked()
{QString serverip=ui->CBIP->currentText().trimmed();ui->New_ServerIP->setText(serverip);QString servermac=getMacByIp(serverip);servermac=servermac.replace(":","-");if(servermac==""){servermac="FF-FF-FF-FF-FF-FF";}ui->ServerMAC->setText(servermac);
}void MainWindow::on_pushButton_7_clicked()
{QString gateway=ui->New_Gateway->text().trimmed();QString gatemac=getMacByIp(gateway);gatemac=gatemac.replace(":","-");if (gatemac==""){gatemac="FF-FF-FF-FF-FF-FF";}ui->GateWayMac->setText(gatemac);
}void MainWindow::on_pushButton_8_clicked()
{if (ui->radioButton1->isChecked()){ui->ServerMAC->setText("FF-FF-FF-FF-FF-FF");}if (ui->radioButton3->isChecked()){ui->GateWayMac->setText("FF-FF-FF-FF-FF-FF");}QString newip=ui->New_IP->text().trimmed();if (!isValidIP(newip)){QMessageBox::critical(NULL, "提示", "请输入有效的设备IP！");ui->New_IP->setFocus();return;}QString newmask=ui->New_Mask->text().trimmed();if (!isValidIP(newmask)){QMessageBox::critical(NULL, "提示", "请输入有效的设备掩码！");ui->New_Mask->setFocus();return;}QString newserverip=ui->New_ServerIP->text().trimmed();if (!isValidIP(newserverip)){QMessageBox::critical(NULL, "提示", "请输入有效的远程服务器ip！");ui->New_ServerIP->setFocus();return;}QString newgateway=ui->New_Gateway->text().trimmed();if (!isValidIP(newgateway)){QMessageBox::critical(NULL, "提示", "请输入有效的网关！");ui->New_Gateway->setFocus();return;}QString servermac=ui->ServerMAC->text().trimmed();if (!isValidMac(servermac)){QMessageBox::critical(NULL, "提示", "请输入有效的远程服务器MAC！");ui->ServerMAC->setFocus();return;}QString gatemac=ui->GateWayMac->text().trimmed();if (!isValidMac(gatemac)){QMessageBox::critical(NULL, "提示", "请输入有效的网关MAC！");ui->GateWayMac->setFocus();return;}bool ok;sendData.clear();sendData.append(0xf9); //功能码QStringList liststr = newip.split("."); //新IPfor (int i=0 ;i<4;i++){sendData.append(liststr[i].toInt());}liststr = newmask.split("."); //掩码for (int i=0 ;i<4;i++){sendData.append(liststr[i].toInt());}liststr = newserverip.split("."); //远程服务器IPfor (int i=0 ;i<4;i++){sendData.append(liststr[i].toInt());}liststr = servermac.split("-"); //远程服务器MACfor (int i=0 ;i<6;i++){sendData.append(liststr[i].toInt(&ok,16));}liststr = newgateway.split("."); //网关for (int i=0 ;i<4;i++){sendData.append(liststr[i].toInt());}liststr = gatemac.split("-"); //网关MACfor (int i=0 ;i<6;i++){sendData.append(liststr[i].toInt(&ok,16));}quint16 devno=ui->New_Nember->text().toUInt();sendData.append(devno % 256); //机号低位sendData.append(devno / 256); //机号高位，高低位都为0表示所有机quint16 newport=ui->New_Port->text().toInt();sendData.append(newport % 256); //端口低位sendData.append(newport / 256); //端口高位QString seri=ui->Serial_Number->text().trimmed();liststr = seri.split("-"); //模块序号for (int i=0 ;i<4;i++){sendData.append(liststr[i].toInt());}quint8 searchid=0;if (ui->checkBox_beep->isChecked()){searchid=searchid+1;}if (ui->radioButton1->isChecked()){searchid=searchid+2;}if (ui->radioButton3->isChecked()){searchid=searchid+4;}if (ui->checkBox_dhcp->isChecked()){searchid=searchid+8;}if (ui->comboBox_out->currentIndex()==1){searchid=searchid+16;}searchid=searchid+ ui->comboBox_in->currentIndex()*32;sendData.append(searchid);sendData.append(0x55); //防干扰后缀sendData.append(0xaa);sendData.append(0x66);sendData.append(0x99);if (ui->checkBox_broadcast->isChecked()){ //使用广播方式发送指令QHostAddress broadcastAddress("255.255.255.255");quint16 port1 = 39169;udpSocket->writeDatagram(sendData.constData(), sendData.size(), QHostAddress::Broadcast, port1);QString dispinf=getsystime()+" Send To: "+("255.255.255.255:"+QString::number(port1)+" ").mid(0,22) ;dispinf=dispinf+ByteArrayToHexString(sendData);listadditems(0,dispinf);}else{SendBuffAct(); //将sendData缓冲数据发送到指定的设备IP端口}
}void MainWindow::on_pushButton_SetTCP_clicked()
{sendData.clear();sendData.append(0x1d); //功能码quint16 devno=0; //机号，0表示所有机sendData.append(devno % 256); //机号低位sendData.append(devno / 256); //机号高位，高低位都为0表示所有机sendData.append(7); //指令长度sendData.append(0x5c); //修改TCP通讯端口功能码sendData.append(4); //数据长度quint16 devport=ui->New_Port->text().toUInt(); //读卡器端口sendData.append(devport % 256); //低位sendData.append(devport / 256); //高位quint16 serverport=ui->lineEdit_TCPRemoPort->text().toUInt(); //远程TCP服务器端口sendData.append(serverport % 256); //低位sendData.append(serverport / 256); //高位quint8 crc=sendData[6]^sendData[7]^sendData[8]^sendData[9]; //数据校验位sendData.append(crc);sendData.append(0x55); //防干扰后缀sendData.append(0xaa);sendData.append(0x66);sendData.append(0x99);if (ui->checkBox_broadcast->isChecked()){ //使用广播方式发送指令QHostAddress broadcastAddress("255.255.255.255");quint16 port1 = 39169;udpSocket->writeDatagram(sendData.constData(), sendData.size(), QHostAddress::Broadcast, port1);QString dispinf=getsystime()+" Send To: "+("255.255.255.255:"+QString::number(port1)+" ").mid(0,22) ;dispinf=dispinf+ByteArrayToHexString(sendData);listadditems(0,dispinf);}else{SendBuffAct(); //将sendData缓冲数据发送到指定的设备IP端口}
}void MainWindow::on_pushButton_SetHttp_clicked()
{QString filenamestr=ui->lineEdit_filename->text().trimmed();QByteArray filebyte=filenamestr.toLocal8Bit();if(filebyte.size()<1){QMessageBox::critical(NULL, "提示", "请输入正确的访问文件，可以是.asp\\.jsp\\.php等脚本文件！");ui->lineEdit_filename->setFocus();return;}sendData.clear();sendData.append(0x1d); //功能码quint16 devno=0; //机号，0表示所有机sendData.append(devno % 256); //机号低位sendData.append(devno / 256); //机号高位，高低位都为0表示所有机sendData.append(filebyte.size()+7); //指令长度sendData.append(0x5b); //设置http协议读卡器访问文件、端口、提效方式的识别码sendData.append(filebyte.size()+4); //数据长度sendData.append(ui->comboBox_Sendmodel->currentIndex()); //提交方式sendData.append(0xff);quint16 serverport=ui->lineEdit_HttpRemoPort->text().toUInt(); //远程http服务器端口sendData.append(serverport % 256); //低位sendData.append(serverport / 256); //高位quint8 crc= sendData[6]^ sendData[7]^ sendData[8]^sendData[9];for(int i=0;i<filebyte.size();i++){sendData.append(filebyte[i]); //访问文件crc=crc ^filebyte[i];}sendData.append(crc);sendData.append(0x55); //防干扰后缀sendData.append(0xaa);sendData.append(0x66);sendData.append(0x99);if (ui->checkBox_broadcast->isChecked()){ //使用广播方式发送指令QHostAddress broadcastAddress("255.255.255.255");quint16 port1 = 39169;udpSocket->writeDatagram(sendData.constData(), sendData.size(), QHostAddress::Broadcast, port1);QString dispinf=getsystime()+" Send To: "+("255.255.255.255:"+QString::number(port1)+" ").mid(0,22) ;dispinf=dispinf+ByteArrayToHexString(sendData);listadditems(0,dispinf);}else{SendBuffAct(); //将sendData缓冲数据发送到指定的设备IP端口}
}void MainWindow::on_pushButton_16_clicked()
{ui->scrollArea_wifi->setVisible(false);
}void MainWindow::on_PBClear_2_clicked()
{ui->scrollArea->setVisible(false);ui->scrollArea_wifi->setVisible(true);
}void MainWindow::on_radioButton_IP_toggled(bool checked)
{if(ui->radioButton_IP->isChecked()){ui->groupBox_dhcp->setVisible(true);}else{ui->groupBox_dhcp->setVisible(false);}
}void MainWindow::on_pushButton_SetUp_clicked()
{QString wifiName=ui->lineEdit_SSID->text().trimmed();QByteArray wifiNamearry=wifiName.toUtf8(); //注意编码格式if(wifiNamearry.size()<1 || wifiNamearry.size()>60){QMessageBox::critical(NULL, "提示", "WIFI热点名称长度不可大于60，不可为空！");ui->lineEdit_SSID->setFocus();return;}QString wifipass=ui->lineEdit_Password->text().trimmed();QByteArray wifipassarry=wifipass.toUtf8(); //注意编码格式if(wifipassarry.size()>64){QMessageBox::critical(NULL, "提示", "WIFI密码长度不可以大于64！");ui->lineEdit_Password->setFocus();return;}sendData.clear();sendData.append(0xf7); //功能码quint16 devno=0; //机号，0表示所有机sendData.append(devno % 256); //机号低位sendData.append(devno / 256); //机号高位，高低位都为0表示所有机sendData.append(wifiNamearry.size()); //热点名称长度quint8 passlen=0;if(ui->checkBox_wifikey->isChecked()){passlen=wifipassarry.size();}sendData.append(passlen); //密码长度int i=0;for (i=0;i<wifiNamearry.size();i++){sendData.append(wifiNamearry[i]);}quint8 bytebit=0;while (sendData.size()<65){sendData.append(bytebit);}for (i=0;i<passlen;i++){sendData.append(wifipassarry[i]);}while (sendData.size()<129){sendData.append(bytebit);}if(ui->radioButton_IP->isChecked()){sendData.append(1);QString ipstr=ui->lineEdit_IP->text().trimmed();if (!isValidIP(ipstr)){QMessageBox::critical(NULL, "提示", "请输入有效的设备IP！");ui->lineEdit_IP->setFocus();return;}QString mskstr=ui->lineEdit_mask->text().trimmed();if (!isValidIP(mskstr)){QMessageBox::critical(NULL, "提示", "请输入正确的读卡器子网掩码！");ui->lineEdit_mask->setFocus();return;}QString gatewaystr=ui->lineEdit_gateway->text().trimmed();if (!isValidIP(gatewaystr)){QMessageBox::critical(NULL, "提示", "请输入正确的读卡器网关！");ui->lineEdit_mask->setFocus();return;}QStringList liststr = ipstr.split("."); //IPfor (int i=0 ;i<4;i++){sendData.append(liststr[i].toInt());}liststr = mskstr.split("."); //掩码for (int i=0 ;i<4;i++){sendData.append(liststr[i].toInt());}liststr = gatewaystr.split("."); //网关for (int i=0 ;i<4;i++){sendData.append(liststr[i].toInt());}}else{sendData.append(bytebit);while (sendData.size()<142){sendData.append(bytebit);}}sendData.append(ui->comboBox_Sendmode->currentIndex());sendData.append(0x55); //防干扰后缀sendData.append(0xaa);sendData.append(0x66);sendData.append(0x99);SendBuffAct(); //将sendData缓冲数据发送到指定的设备IP端口
}void MainWindow::on_pushButton_Read_clicked()
{ui->listWidget_wifi->clear();sendData.clear();sendData.append(0xa4); //功能码quint16 devno=ui->textEdit_DeviceNumber->toPlainText().toUInt();sendData.append(devno % 256); //机号低位sendData.append(devno / 256); //机号高位，高低位都为0表示所有机SendBuffAct(); //将sendData缓冲数据发送到指定的设备IP端口
}
