开头 :
这场没打，今天vp了一下，写了A-G,然后就去吃饭了!
比赛链接 :
Dashboard - Codeforces Round 952 (Div. 4) - Codeforces
A
直接交换，输出即可
inline void solve(){string a , b ; cin >> a>> b ;char c = a[0] ;a[0] = b[0] ;b[0] = c ;cout << a << " " << b << endl ;
}B
数据范围小，模拟那个过程即可;
#include<bits/stdc++.h>
#define IOS ios::sync_with_stdio(0);cin.tie(0);cout.tie(0);
using namespace std;
typedef long long LL;
typedef unsigned long long ULL ;
#define PI acos(-1)
#define endl '\n'
#define pair<int,int> PII ;
#define x first
#define y second
#define no do { cout << "No" << endl; return; } while(0)
#define yes do { cout << "Yes" << endl; return; } while (0)
#define lowbit(x) ((x) & -(x))
#define rep(i, s, e) for (int i=(s);i<(e);++i)
#define all(v) v.begin(), v.end()
#define pb push_back
const LL INF = 1e18 ;
const int mod = 1e9+7;
const int N = 2e5+10;
int dx[4] = {0, 1, 0, -1}, dy[5] = {1, 0, -1, 0};LL gcd(LL a, LL b) {return b ? gcd(b, a % b) : a;
}LL qmi(int m, int k, int p){int res = 1 % p, t = m;while (k){if (k&1) res = res * t % p;t = t * t % p;k >>= 1;}return res;}inline void solve(){int n ; cin >> n ;int ans = 0 ,yss = 1 ;rep(i,2,n+1){int x = i ;int res = 0 ;while(x<=n){res += x ;x += i ;}if(res>ans) {ans = res ;yss = i ;}}cout << yss << endl ;
}signed main(){IOSint _ = 1;cin >> _;while(_ --) solve();return 0;
}C
也是模拟遍历，先用前缀和预处理一下;
如果ma * 2 = b[i],表示a[1,i]是满足题目条件的;
inline void solve(){int n ; cin >> n ;rep(i,1,n) cin >> a[i] ;rep(i,1,n) b[i] = b[i-1] + a[i] ;int ans = 0 ;// ma // b[i]-ma = maLL ma = 0 ;rep(i,1,n){ma = max(ma,a[i]) ;if(ma*2==b[i]) ans ++ ;}cout << ans << endl;
}D
因为所有点都是关于中心点对称分布的，直接求横坐标，纵坐标的平均数就是答案了
inline void solve(){int n ,m ; cin >> n >> m ;vector<vector<char>> a(n+1,vector<char>(m+1)) ;vector<PII> b ;rep(i,1,n)rep(j,1,m){cin >> a[i][j] ;if(a[i][j]=='#') b.pb({i,j}) ;}int sz = b.size() ;int xx , yy ;if(sz==1){xx = b[0].x ; yy = b[0].y ;cout << xx << " " << yy << endl ;return ;}LL xs = 0 , ys = 0 ; for(auto& bc : b){int xc = bc.x , yc = bc.y ;xs += xc ;ys += yc ; }xx = xs / sz ;yy = ys / sz ;cout << xx << " " << yy << endl ;
}E
直接暴力即可,遍历其中两条边,复杂度(2000^2) ;
对于每个满足条件的长宽高i,j,k(也就是i*j*k==s)，在S中的移动范围分别是[i,x],[j,y],[k,z];
然后相乘即可;
inline void solve(){LL x , y , z , s ; cin >> x >> y >> z >> s ;LL ans = 0 ;rpL(i,1,x){rpL(j,1,y){LL k = s / (i*j) ;if(s%(i*j)==0 && k<=z){LL res = (x-i+1)*(y-j+1)*(z-k+1) ;ans = max(ans,res) ;}}}cout << ans << endl;
}F
一个非常明显的二分答案，但是用堆也可以做;
(可能这场题多的原因);
#include<bits/stdc++.h>
#define IOS ios::sync_with_stdio(0);cin.tie(0);cout.tie(0);
using namespace std;
typedef long long LL;
typedef unsigned long long ULL ;
#define PI acos(-1)
#define endl '\n'
#define PII pair<int,int>
#define x first
#define y second
#define no do { cout << "No" << endl; return; } while(0)
#define yes do { cout << "Yes" << endl; return; } while (0)
#define lowbit(x) ((x) & -(x))
#define rep(i, s, e) for (int i=(s);i<=(e);++i)
#define all(v) v.begin(), v.end()
#define pb push_back
const LL INF = 1e18 ;
const int mod = 1e9+7;
const int N = 2e5+10;
int dx[4] = {0, 1, 0, -1}, dy[5] = {1, 0, -1, 0};LL gcd(LL a, LL b) {return b ? gcd(b, a % b) : a;
}LL qmi(int m, int k, int p){int res = 1 % p, t = m;while (k){if (k&1) res = res * t % p;t = t * t % p;k >>= 1;}return res;}int h , n ;
int a[N] , c[N] ;bool pd(LL m){LL dmg = 0 ;rep(i,1,n){dmg += a[i] * ((m+c[i]-1) / c[i]) ;if(dmg>=h) return true ;}return dmg>=h ;
}inline void solve(){cin >> h >> n ;LL sum = 0 ;rep(i,1,n) cin >> a[i] , sum += a[i];rep(i,1,n) cin >> c[i] ;if(sum>=h){cout << 1 << endl ;return ;}LL l = 1 , r = 2e12 ;while(l+1<r){LL m = (l+r)>>1 ;if(pd(m)) r = m ;else l = m ; // cout << l << endl ;}cout << r << endl ;
}signed main(){IOSint _ = 1;cin >> _;while(_ --) solve();return 0;
}G
- D(n) : 表示数位和;
- D(k*n) = k*D(n) : 那么n的所有数位上的数x在*k之后不能够进位
- --> 能够推出x<=[9/k] ps : []代表下取整
- 然后计算[10^l,10^r)中有多少个数n满足这个条件
- 对于每一个数位，有t=[9/k]+1 种选择，有r个数位，res=t^r
- ans = t^r-t^l
用快速幂优化一下 :
#include<bits/stdc++.h>
#define IOS ios::sync_with_stdio(0);cin.tie(0);cout.tie(0);
using namespace std;
typedef long long LL;
typedef unsigned long long ULL ;
#define PI acos(-1)
#define endl '\n'
#define PII pair<int,int>
#define x first
#define y second
#define no do { cout << "No" << endl; return; } while(0)
#define yes do { cout << "Yes" << endl; return; } while (0)
#define lowbit(x) ((x) & -(x))
#define rep(i, s, e) for (int i=(s);i<=(e);++i)
#define all(v) v.begin(), v.end()
#define pb push_back
const LL INF = 1e18 ;
const int Mod = 1e9+7;
const int N = 2e5+10;
int dx[4] = {0, 1, 0, -1}, dy[5] = {1, 0, -1, 0};LL gcd(LL a, LL b) {return b ? gcd(b, a % b) : a;
}LL qmi(LL m, LL k, LL p){LL res = 1 % p, t = m;while (k){if (k&1) res = res * t % p;t = t * t % p;k >>= 1;}return res;}inline void solve(){
// D(n) : 表示数位和
// D(k*n) = k*D(n) : 那么n的所有数位上的数x在*k之后不能够进位
// --> 能够推出x<=[9/k] ps : []代表下取整
// 然后计算[10^l,10^r)中有多少个数n满足这个条件
// 对于每一个数位，有t=[9/k]+1 种选择，有r个数位，res=t^r
// ans = t^r-t^lLL l , r , k ; cin >> l >> r >> k ;if(k>=10){cout << 0 << endl ;return ;}int p = floor(1.0*9/k)+1 ;LL ans = (qmi(p,r,Mod) - qmi(p,l,Mod)) % Mod ;if(ans<0) ans += Mod ;cout << ans << endl ;
}signed main(){IOSint _ = 1;cin >> _;while(_ --) solve();return 0;
}H
用并查集记录关于每个点的连通块 ;
然后遍历每一行，每一列来求将这一行/列全改为#,之后的连通块的大小，找到最大的;
#include<bits/stdc++.h>
#define IOS ios::sync_with_stdio(0);cin.tie(0);cout.tie(0);
using namespace std;
typedef long long LL;
typedef unsigned long long ULL ;
#define PI acos(-1)
#define endl '\n'
#define PII pair<int,int>
#define no do { cout << "No" << endl; return; } while(0)
#define yes do { cout << "Yes" << endl; return; } while (0)
#define lowbit(x) ((x) & -(x))
#define rep(i, s, e) for (int i=(s);i<=(e);++i)
#define all(v) v.begin(), v.end()
#define pb push_back
const LL INF = 1e18 ;
const int mod = 1e9+7;
const int N = 2e5+10;
int dx[4] = {0, 1, 0, -1}, dy[5] = {1, 0, -1, 0};LL gcd(LL a, LL b) {return b ? gcd(b, a % b) : a;
}LL qmi(int m, int k, int p){int res = 1 % p, t = m;while (k){if (k&1) res = res * t % p;t = t * t % p;k >>= 1;}return res;}struct DSU {std::vector<int> f, siz;DSU() {}DSU(int n) {init(n);}void init(int n) {f.resize(n);std::iota(f.begin(), f.end(), 0);siz.assign(n, 1);}int find(int x) {while (x != f[x]) {x = f[x] = f[f[x]];}return x;}bool same(int x, int y) {return find(x) == find(y);}bool merge(int x, int y) {x = find(x);y = find(y);if(x == y) return false;siz[x] += siz[y];f[y] = x;return true;}int size(int x) {return siz[find(x)];}
};inline void solve(){int n ,m ; cin >> n >> m ;vector<string> s(n) ;rep(i,0,n-1) cin >> s[i] ;int sz = n * m ;DSU dsu(sz) ;rep(i,0,n-1){rep(j,0,m-1){if(i+1<n&&s[i][j]=='#'&&s[i+1][j]=='#'){//对行进行扩展 dsu.merge(i*m+j,(i+1)*m+j);//合并 }if(j+1<m&&s[i][j]=='#'&&s[i][j+1]=='#'){dsu.merge(i*m+j,i*m+j+1);//合并 }}}int ans = 0 ;vector<int> vis(sz,-1) ;rep(r,0,n-1){int res = 0 ;rep(i,0,m-1){//修改一行 if(s[r][i]=='.') res ++ ;//修改成#的数目 for(int xx=max(0,r-1);xx<=min(n-1,r+1);xx++){//找上下两行的联通块 if(s[xx][i]=='#'){int u=dsu.find(xx*m+i);if(vis[u]!=r){vis[u] = r ;res += dsu.size(u);}}}}ans = max(ans,res) ;}vis.assign(sz,-1) ;for(int c=0;c<m;c++){int res = 0 ;for(int i=0;i<n;i++){if(s[i][c]=='.') res++ ;for(int y=max(0,c-1);y<=min(m-1,c+1);y++){if(s[i][y]=='#'){int u = dsu.find(i*m+y);if(vis[u]!=c){vis[u] = c ;res += dsu.size(u) ;}}}}ans = max(ans,res) ;}cout << ans << endl ;
}signed main(){IOSint _ = 1;cin >> _;while(_ --) solve();return 0;
}
