Deepin 图形化部署 Hadoop Single Node Cluster
升级操作系统和软件
快捷键 ctrl+alt+t 打开控制台窗口
更新 apt 源
sudo apt update
更新 系统和软件
sudo apt -y dist-upgrade
升级后建议重启
开启ssh服务
打开资源管理器
进入系统盘
找到 etc 目录
在系统盘的 etc 目录上 右键 点击 以管理员身份打开
输入密码
以管理员身份 进入 etc 目录
进入 ssh 目录
在 /etc/ssh目录下 编写 ssh_config
原始文件内容
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.Host *
# ForwardAgent no
# ForwardX11 no
# ForwardX11Trusted yes
# PasswordAuthentication yes
# HostbasedAuthentication no
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no
# GSSAPIKeyExchange no
# GSSAPITrustDNS no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# IdentityFile ~/.ssh/id_ecdsa
# IdentityFile ~/.ssh/id_ed25519
# Port 22
# Protocol 2
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,umac-64@openssh.com
# EscapeChar ~
# Tunnel no
# TunnelDevice any:any
# PermitLocalCommand no
# VisualHostKey no
# ProxyCommand ssh -q -W %h:%p gateway.example.com
# RekeyLimit 1G 1hSendEnv LANG LC_*HashKnownHosts yesGSSAPIAuthentication yes在 /etc/ssh/ssh_config 文件中 将 # Port 22 注释去掉
去掉注释后端 文件内容
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.Host *
# ForwardAgent no
# ForwardX11 no
# ForwardX11Trusted yes
# PasswordAuthentication yes
# HostbasedAuthentication no
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no
# GSSAPIKeyExchange no
# GSSAPITrustDNS no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# IdentityFile ~/.ssh/id_ecdsa
# IdentityFile ~/.ssh/id_ed25519Port 22
# Protocol 2
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,umac-64@openssh.com
# EscapeChar ~
# Tunnel no
# TunnelDevice any:any
# PermitLocalCommand no
# VisualHostKey no
# ProxyCommand ssh -q -W %h:%p gateway.example.com
# RekeyLimit 1G 1hSendEnv LANG LC_*HashKnownHosts yesGSSAPIAuthentication yes
重启 ssh 服务
sudo systemctl restart ssh
设置 ssh 服务开机启动
sudo systemctl enable ssh
上传安装包
将 jdk 和 hadoop 安装包 拖入到 deepin 窗口即可
将桌面上的安装包 剪切到 用户主目录指定位置
jdk 保存在 /home/lhz/opt/java/jdk
hadoop 保存在 /home/lhz/opt
使用命令创建
mkdir -p /home/lhz/opt/java/jdk
解压安装包
选中 jdk 安装包 右键 解压到当前文件夹
选择解压缩后的jdk目录 右键 重命名
将 jdk 安装包 重命名为 jdk-8
选中 hadoop 安装包 右键 解压到当前文件夹
选中 hadoop 解压后的目录 右键 重命名
将 hadoop 安装包 重命名为 hadoop-3
配置环境变量
打开资源管理器
进入当前用户主目录
使用快捷键 ctrl+h 显示隐藏文件
编辑 .bashrc 文件
在 .bashrc 文件 末尾追加以下内容
export JAVA_HOME=/home/lhz/opt/java/jdk/jdk-8export HADOOP_HOME=/home/lhz/opt/hadoop-3export HADOOP_INSTALL=${HADOOP_HOME}
export HADOOP_MAPRED_HOME=${HADOOP_HOME}
export HADOOP_COMMON_HOME=${HADOOP_HOME}
export HADOOP_HDFS_HOME=${HADOOP_HOME}
export YARN_HOME=${HADOOP_HOME}
export HADOOP_CONF_DIR=${HADOOP_HOME}/etc/hadoopexport HDFS_NAMENODE_USER=lhz
export HDFS_DATANODE_USER=lhz
export HDFS_ZKFC_USER=lhz
export HDFS_JOURNALNODE_USER=lhzexport YARN_RESOURCEMANAGER_USER=lhz
export YARN_NODEMANAGER_USER=lhzexport PATH=$PATH:$JAVA_HOME/bin:$HADOOP_HOME/bin:$HADOOP_HOME/sbin
设置静态IP地址
网络图标 右键
选择 网络设置
点击 网络详情 查看当前相信网络信息
点击 有线连接 点击右侧 由三角图表
点击 IPV4 下拉列表
选择手动
按照网络要求填入 IP地址、子网掩码、网关、DNS
修改主机名
控制台输入
sudo hostnamectl set-hostname hadoop
修改 hosts 文件
打开资源管理器
进入系统盘
找到 etc 目录
在系统盘的 etc 目录上 右键 点击 以管理员身份打开
输入密码
以管理员身份 进入 etc 目录
找到 /etc/hosts
内容修改为 192.168.171.129 hadoop
重启系统
修改 hadoop 配置文件
修改Hadoop配置文件 在hadoop解压后的目录找到 etc/hadoop目录
修改如下配置文件
- hadoop-env.sh
- core-site.xml
- hdfs-site.xml
- workers
- mapred-site.xml
- yarn-site.xml
hadoop-env.sh 文件末尾追加
export JAVA_HOME=/home/lhz/opt/java/jdk/jdk-8
export HDFS_NAMENODE_USER=lhz
export HDFS_DATANODE_USER=lhz
export HDFS_ZKFC_USER=lhz
export HDFS_JOURNALNODE_USER=lhzexport YARN_RESOURCEMANAGER_USER=lhz
export YARN_NODEMANAGER_USER=lhz
core-site.xml
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
<configuration><property><name>fs.defaultFS</name><value>hdfs://hadoop:9000</value></property><property><name>hadoop.tmp.dir</name><value>/home/lhz/hadoop_data</value></property><property><name>hadoop.http.staticuser.user</name><value>lhz</value></property><property><name>dfs.permissions.enabled</name><value>false</value></property><property><name>hadoop.proxyuser.lhz.hosts</name><value>*</value></property><property><name>hadoop.proxyuser.lhz.groups</name><value>*</value></property>
</configuration>
hdfs-site.xml
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
<configuration><property><name>dfs.replication</name><value>1</value></property>
</configuration>
workers
hadoop
mapred-site.xml
<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
<configuration><property><name>mapreduce.framework.name</name><value>yarn</value></property><property><name>mapreduce.application.classpath</name><value>$HADOOP_MAPRED_HOME/share/hadoop/mapreduce/*:$HADOOP_MAPRED_HOME/share/hadoop/mapreduce/lib/*</value></property>
</configuration>
yarn-site.xml
<?xml version="1.0"?>
<configuration><property><name>yarn.nodemanager.aux-services</name><value>mapreduce_shuffle</value></property><property><name>yarn.nodemanager.env-whitelist</name><value>JAVA_HOME,HADOOP_COMMON_HOME,HADOOP_HDFS_HOME,HADOOP_CONF_DIR,CLASSPATH_PREPEND_DISTCACHE,HADOOP_YARN_HOME,HADOOP_HOME,PATH,LANG,TZ,HADOOP_MAPRED_HOME</value></property>
</configuration>
配置ssh免密钥登录
创建本地秘钥并将公共秘钥写入认证文件
ssh-keygen -t rsa -P '' -f ~/.ssh/id_rsa
cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys
# 或者
ssh-copy-id hadoop
Hadoop初始化
# 格式化文件系统
hdfs namenode -format
# 启动 NameNode SecondaryNameNode DataNode
start-dfs.sh
# 查看启动进程
jps
# 看到 DataNode SecondaryNameNode NameNode 三个进程代表启动成功
# 启动 ResourceManager daemon 和 NodeManager
start-yarn.sh
# 看到 DataNode NodeManager SecondaryNameNode NameNode ResourceManager 五个进程代表启动成功
重点提示：
# 关机之前 依关闭服务
stop-yarn.sh
stop-dfs.sh
# 开机后 依次开启服务
start-dfs.sh
start-yarn.sh
或者
# 关机之前关闭服务
stop-all.sh
# 开机后开启服务
start-all.sh
#jps 检查进程正常后开启胡哦关闭在再做其它操作
浏览器访问web页面
http://localhost:9870
