vpp 2206编译# ./extras/vagrant/build.sh # make build
# make runstartup-default.conf 的内容cpu {main-core 0
}unix {interactive cli-listen 127.0.0.1:5002log /tmp/vpp.logfull-coredumpstartup-config /home/king/share/vpp/startup.txt
}dpdk {uio-driver igb_uiodev 0000:03:00.0 {name dpdk0}}session {enableuse-app-socket-apievt_qs_memfd_seg
}socksvr {socket-name /var/run/vpp/vcl-api.sock
}api-trace {on
}plugins {
#	path /home/king/share/vpp/build-root/build-vpp-native/vpp/lib/x86_64-linux-gnu/vpp_plugins/plugin oddbuf_plugin.so { enable }
}vcl配置vcl {heapsize 64Msegment-size 4000000000add-segment-size 4000000000rx-fifo-size 4000000tx-fifo-size 4000000app-socket-api /run/vpp/app_ns_sockets/default
}startup.txtset interface state dpdk0 up
set interface ip address dpdk0 192.168.0.29/24
show interface address  dpdk0插入igb_uio.ko# cd /path/to/dpdk-kmods/linux/igb_uio# insmod igb_uio.kodpdk参数配置# mount -t hugetlbfs nodev /mnt/huge/
# echo 1024 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages网口# ifconfig eth0 down启动vpp# cd /path/to/vpp
# export STARTUP_CONF=/etc/vpp/startup-default.conf
# make run设置 app ns# app ns add id 123 secret 0 sw_if_index 1 if dpdk0
# show app ns启动 vpp+iperf3+vcl# LD_PRELOAD=/home/king/share/vpp/build-root/install-vpp-native/vpp/lib/x86_64-linux-gnu/libvcl_ldpreload.so VCL_CONFIG=/etc/vpp/vcl
-default.conf iperf3 -s --bind=192.168.0.29启动 vpp + vcl + nginx# LD_PRELOAD=/home/king/share/vpp/build-root/build-vpp-native/vpp/lib/x86_64-linux-gnu/libvcl_ldpreload.so VCL_CONFIG=/etc/vpp/vcl-default.conf ./sbin/nginx -c ./conf/nginx.conf