20240108移远的4G模块EC20在Firefly的AIO-3399J开发板的Android11下调通的步骤

20240108移远的4G模块EC20在Firefly的AIO-3399J开发板的Android11下调通的步骤
2024/1/8 17:50


缘起:使用友善之臂的Android11可以让EC20上网,但是同样的修改步骤,Toybrick的Android11不能让EC20上网。
最后确认是selinux的问题!


开发板:Firefly的AIO-3399J【RK3399】
SDK:rk3399-android-11-r20211216.tar.xz【Android11】
Android11.0.tar.bz2.aa【ToyBrick】
Android11.0.tar.bz2.ab
Android11.0.tar.bz2.ac

https://wiki.t-firefly.com/AIO-3399J/prepare_compile_android.html
AIO-3399J产品规格书 立即购买
AIO-3399J 采用 RK3399 六核(A72x2+A53x4) 64 位处理器,主频高达1.8GHz,集成了四核 Mali-T860 GPU,性能优异。


0、简略步骤:
rootroot@rootroot-X99-Turbo:~/3TB$ cat Android11.0.tar.bz2.a* > Android11.0.tar.bz2
rootroot@rootroot-X99-Turbo:~/3TB$ tar jxvf Android11.0.tar.bz2 
rootroot@rootroot-X99-Turbo:~/3TB$ mv Android11.0 64rk3399-android-11
rootroot@rootroot-X99-Turbo:~/3TB$ cd 64rk3399-android-11
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11$ cd u-boot
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11/u-boot$ ./make.sh rk3399
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11/u-boot$ cd ..
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11$ cd kernel/
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11/kernel$ make ARCH=arm64 rockchip_defconfig android-11.config -j36
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11/kernel$ make ARCH=arm64 BOOT_IMG=../rockdev/Image-rk3399_Android11/boot.img rk3399-sapphire-excavator-edp-avb.img -j36
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11$ source build/envsetup.sh 
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11$ lunch
     36. rk3399_Android11-userdebug
Which would you like? [aosp_arm-eng] 36
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11$ 
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11$ make -j36
rootroot@rootroot-X99-Turbo:~/3TB/64rk3399-android-11$ ./build.sh -u


1、
Android11 + Kernel所需要修改的文件:
1、【完全一致/相同】
Z:\rk3399-android-11\device\rockchip\common\4g_modem\manifest.xml

2、复制库文件:
chat
dhcpcd
ip-down
ip-up
libmeig-ril.so
libquec-ril.so
libreference-ril-62.so
libreference-ril.so

Z:\rk3399-android-11\device\rockchip\common\ec20\chat
Z:\rk3399-android-11\device\rockchip\common\ec20\dhcpcd
Z:\rk3399-android-11\device\rockchip\common\ec20\ip-down
Z:\rk3399-android-11\device\rockchip\common\ec20\ip-up
Z:\rk3399-android-11\device\rockchip\common\ec20\libmeig-ril.so
Z:\rk3399-android-11\device\rockchip\common\ec20\libquec-ril.so
Z:\rk3399-android-11\device\rockchip\common\ec20\libreference-ril-62.so
Z:\rk3399-android-11\device\rockchip\common\ec20\libreference-ril.so

3、
Z:\rk3399-android-11\device\rockchip\common\BoardConfig.mk

4、
Z:\rk3399-android-11\device\rockchip\common\device.mk

5、
Z:\rk3399-android-11\device\rockchip\common\ueventd.rockchip.rc

6、
Z:\rk3399-android-11\device\rockchip\rk3399\rk3399_Android11\overlay\frameworks\base\core\res\res\values\config.xml

【不用修改】
Z:\rk3399-android-11\device\rockchip\rk3399\device.mk

7、
Z:\rk3399-android-11\kernel\drivers\net\usb\Makefile
Z:\rk3399-android-11\kernel\drivers\net\usb\qmi_wwan_q.c

8、
Z:\rk3399-android-11\kernel\drivers\usb\serial\option.c
【几乎没有改动】
Z:\rk3399-android-11\kernel\drivers\usb\serial\qcserial.c
Z:\rk3399-android-11\kernel\drivers\usb\serial\usb_wwan.c

9、
Z:\rk3399-android-11\system\core\init\devices.cpp


2、关闭selinux有效,关闭selinux之后就可以通过4G上网了!
Microsoft Windows [版本 10.0.19045.2311]
(c) Microsoft Corporation。保留所有权利。

C:\Users\Administrator>adb shell
* daemon not running; starting now at tcp:5037
* daemon started successfully
rk3399_Android11:/ $ su
rk3399_Android11:/ #
rk3399_Android11:/ # getenforce
Enforcing
rk3399_Android11:/ #
rk3399_Android11:/ # setenforce 0
rk3399_Android11:/ #
rk3399_Android11:/ # getenforce
Permissive
rk3399_Android11:/ #
rk3399_Android11:/ #
C:\Users\Administrator>


3、LOG:
[  201.121383] type=1400 audit(1704718461.520:163): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[  201.993162] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  202.995526] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  203.997373] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)

[  204.121623] type=1400 audit(1704718464.520:164): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[  204.999604] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  206.001804] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  207.003569] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  207.122334] type=1400 audit(1704718467.520:165): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[  208.005888] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  209.007776] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  210.009581] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  210.122900] type=1400 audit(1704718470.520:166): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[  211.012147] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  212.014224] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  213.015883] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  213.123345] type=1400 audit(1704718473.520:167): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[  214.018871] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  215.021195] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  216.022922] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  216.124206] type=1400 audit(1704718476.523:168): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[  217.024564] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  218.026307] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  219.028695] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  219.125034] type=1400 audit(1704718479.523:169): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[  220.031253] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  220.971414] type=1404 audit(1704718481.366:170): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1

[  221.032744] selinux: avc:  received setenforce notice (enforcing=0)
[  221.032806] selinux: 

[  221.033356] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  222.035068] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)
[  222.125495] type=1400 audit(1704718482.523:171): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=1
[  222.125680] type=1400 audit(1704718482.523:172): avc: denied { open } for comm="rild" path="/dev/ttyUSB2" dev="tmpfs" ino=22919 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=1
[  222.126277] type=1400 audit(1704718482.523:173): avc: denied { ioctl } for comm="rild" path="/dev/ttyUSB2" dev="tmpfs" ino=22919 ioctlcmd=0x5401 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=1
[  223.457184] type=1400 audit(1704718483.853:174): avc: denied { read } for comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=25669 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
[  223.457386] type=1400 audit(1704718483.853:175): avc: denied { open } for comm="memtrack@1.0-se" path="/sys/kernel/debug/mali0/ctx/861_2/mem_profile" dev="debugfs" ino=25669 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
[  223.457773] type=1400 audit(1704718483.853:176): avc: denied { getattr } for comm="memtrack@1.0-se" path="/sys/kernel/debug/mali0/ctx/861_2/mem_profile" dev="debugfs" ino=25669 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
[  224.941631] type=1400 audit(1704718485.340:177): avc: denied { read write } for comm="rild" name="cdc-wdm0" dev="tmpfs" ino=22921 scontext=u:r:rild:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[  224.941869] type=1400 audit(1704718485.340:178): avc: denied { open } for comm="rild" path="/dev/cdc-wdm0" dev="tmpfs" ino=22921 scontext=u:r:rild:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[  225.421034] type=1400 audit(1704718485.816:179): avc: denied { write } for comm="Binder:245_5" name="mtu" dev="sysfs" ino=30076 scontext=u:r:netd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[  225.421399] type=1400 audit(1704718485.816:180): avc: denied { open } for comm="Binder:245_5" path="/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.7/2-1.7:1.4/net/wwan0/mtu" dev="sysfs" ino=30076 scontext=u:r:netd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[  225.481568] init: processing action (sys.sysctl.tcp_def_init_rwnd=*) from (/system/etc/init/hw/init.rc:994)
[  244.316969] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[  250.742606] type=1400 audit(1704718511.140:181): avc: denied { read } for comm="Binder:178_2" name="wakeup9" dev="sysfs" ino=22418 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=1
[  250.742843] type=1400 audit(1704718511.140:182): avc: denied { open } for comm="Binder:178_2" path="/sys/devices/virtual/power_supply/test_battery/wakeup9" dev="sysfs" ino=22418 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=1
[  250.743723] type=1400 audit(1704718511.140:183): avc: denied { read } for comm="Binder:178_2" name="wakeup7" dev="sysfs" ino=21813 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[  250.743834] type=1400 audit(1704718511.140:184): avc: denied { open } for comm="Binder:178_2" path="/sys/devices/platform/ff3c0000.i2c/i2c-0/0-001b/rk808-rtc/rtc/rtc0/wakeup7" dev="sysfs" ino=21813 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[  250.744014] type=1400 audit(1704718511.140:185): avc: denied { read } for comm="Binder:178_2" name="event_count" dev="sysfs" ino=21820 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[  250.744130] type=1400 audit(1704718511.140:186): avc: denied { open } for comm="Binder:178_2" path="/sys/devices/platform/ff3c0000.i2c/i2c-0/0-001b/rk808-rtc/rtc/rtc0/wakeup7/event_count" dev="sysfs" ino=21820 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[  250.744246] type=1400 audit(1704718511.140:187): avc: denied { getattr } for comm="Binder:178_2" path="/sys/devices/platform/ff3c0000.i2c/i2c-0/0-001b/rk808-rtc/rtc/rtc0/wakeup7/event_count" dev="sysfs" ino=21820 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

console:/ $ 
console:/ $ su
console:/ # 
console:/ # 


4、根据经验干掉/拿掉多余的so文件,无效!
Z:\3TB\76Android11.0\device\rockchip\rk3399\device.mk
#
#add Rockchip properties here
#
PRODUCT_PROPERTY_OVERRIDES += \
    ro.ril.ecclist=112,911 \
    ro.opengles.version=196610 \
    wifi.interface=wlan0 \
#                ro.telephony.default_network=9 \
#                rild.libpath=/vendor/lib64/libquectel-ril.so \
#                rild.libargs=-d /dev/ttyUSB0 \

    persist.tegra.nvmmlite = 1 \
    ro.audio.monitorOrientation=true \
    debug.nfc.fw_download=false \
    debug.nfc.se=false \
    ro.rk.screenoff_time=60000 \
    ro.rk.screenshot_enable=true \
    ro.rk.def_brightness=200 \
    ro.rk.homepage_base=http://www.google.com/webhp?client={CID}&source=android-home \
    ro.rk.install_non_market_apps=false \
    vendor.hwc.compose_policy=6 \
    sys.wallpaper.rgb565=0 \
    sf.power.control=2073600 \
    sys.rkadb.root=0 \
    ro.sf.fakerotation=false \
    ro.sf.hwrotation=0 \
    ro.rk.MassStorage=false \
    ro.rk.systembar.voiceicon=true \
    ro.rk.systembar.tabletUI=false \
    ro.rk.LowBatteryBrightness=false \
    ro.tether.denied=false \
    sys.resolution.changed=false \
    ro.default.size=100 \
    ro.product.usbfactory=rockchip_usb \
    wifi.supplicant_scan_interval=15 \
    ro.factory.tool=0 \
    ro.kernel.android.checkjni=0 \
    ro.build.shutdown_timeout=6 \
    persist.enable_task_snapshots=false


修改为:
#
#add Rockchip properties here
#
PRODUCT_PROPERTY_OVERRIDES += \
                ro.ril.ecclist=112,911 \
                ro.opengles.version=196610 \
                wifi.interface=wlan0 \
                #rild.libpath=/vendor/lib64/libril-rk29-dataonly.so \
                #rild.libargs=-d /dev/ttyACM0 \

                persist.tegra.nvmmlite = 1 \
                ro.audio.monitorOrientation=true \
                debug.nfc.fw_download=false \
                debug.nfc.se=false \
                ro.rk.screenoff_time=60000 \
                ro.rk.screenshot_enable=true \
                ro.rk.def_brightness=200 \
                ro.rk.homepage_base=http://www.google.com/webhp?client={CID}&source=android-home \
                ro.rk.install_non_market_apps=false \
                vendor.hwc.compose_policy=6 \
                sys.wallpaper.rgb565=0 \
                sf.power.control=2073600 \
                sys.rkadb.root=0 \
                ro.sf.fakerotation=false \
                ro.sf.hwrotation=0 \
                ro.rk.MassStorage=false \
                ro.rk.systembar.voiceicon=true \
                ro.rk.systembar.tabletUI=false \
                ro.rk.LowBatteryBrightness=false \
                ro.tether.denied=false \
                sys.resolution.changed=false \
                ro.default.size=100 \
                ro.product.usbfactory=rockchip_usb \
                wifi.supplicant_scan_interval=15 \
                ro.factory.tool=0 \
                ro.kernel.android.checkjni=0 \
                ro.sf.lcd_density=280 \
                ro.build.shutdown_timeout=6 \
                persist.enable_task_snapshots=false


5、【关闭多余的打印LOG】无效
BING搜索:init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwservicemanager)

https://bbs.elecfans.com/jishu_2263076_1_1.html
[问答] 如何调试RK3568-ANDROID11-4G-EC20?

RK3568/system/core/init/init.cpp      
    + if(strcmp(name.c_str(),"android.hardware.radio@1.1::IRadio/slot1") != 0) {
    LOG(INFO) << "Control message: Processed ctl." << message << " for '" << name
              << "' from pid: " << from_pid << " (" << process_cmdline << ")";
        +        }


https://www.cnblogs.com/wmc245376374/p/17918630.html
3568 EC25-G调试4G和GPS功能

9.没接4G模块时候,一直报错:

 init: Control message: Could not find 'android.hardware.radio@1.1::IRadio/slot1' for ctl.interface_start from pid: 149 (/system/bin/hwservicemanager)
需要修改以下2点:

a.system/core/


diff --git a/init/init.cpp b/init/init.cpp
old mode 100644
new mode 100755
index 29859c5..ff83b9f
--- a/init/init.cpp
+++ b/init/init.cpp
@@ -421,9 +421,11 @@ static bool HandleControlMessage(std::string_view message, const std::string& na
         return false;
     }
 
-    LOG(INFO) << "Control message: Processed ctl." << message << " for '" << name
-              << "' from pid: " << from_pid << " (" << process_cmdline << ")";
-    return true;
+    if(strcmp(name.c_str(),"android.hardware.radio@1.1::IRadio/slot1") != 0) {
+        LOG(INFO) << "Control message: Processed ctl." << message << " for '" << name
+                << "' from pid: " << from_pid << " (" << process_cmdline << ")";
+    }
+    return true; 

 }
 

b./system/libhidl


LOG:
[   12.856211] read descriptors
[   12.856246] read strings
[   12.857072] init: processing action (sys.usb.config=adb && sys.usb.configfs=1 && sys.usb.ffs.ready=1) from (/system/etc/init/hw/init.usb.configfs.rc:20)
[   12.858924] init: Command 'symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f1' action=sys.usb.config=adb && sys.usb.configfs=1 && sys.usb.ffs.ready=1 (/system/etc/init/hw/init.usb.configfs.rc:22) took 0ms and failed: symlink() failed: File exists
[   12.960543] dwc3 fe800000.dwc3: device reset
[   12.960749] android_work: did not send uevent (0 0           (null))
[   13.062612] android_work: sent uevent USB_STATE=CONNECTED
[   13.151964] configfs-gadget gadget: high-speed config #1: b
[   13.152205] android_work: sent uevent USB_STATE=CONFIGURED
[   13.549802] init: Control message: Processed ctl.start for 'idmap2d' from pid: 452 (system_server)
[   14.233461] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[   14.244322] type=1400 audit(1704719876.640:32): avc: denied { read } for comm="Binder:180_2" name="wakeup9" dev="sysfs" ino=22418 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[   14.244619] type=1400 audit(1704719876.640:33): avc: denied { read } for comm="Binder:180_2" name="wakeup7" dev="sysfs" ino=21813 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[   14.244761] type=1400 audit(1704719876.640:34): avc: denied { read } for comm="Binder:180_2" name="wakeup12" dev="sysfs" ino=26216 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[   14.244857] type=1400 audit(1704719876.640:35): avc: denied { read } for comm="Binder:180_2" name="wakeup5" dev="sysfs" ino=21204 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[   14.244946] type=1400 audit(1704719876.640:36): avc: denied { read } for comm="Binder:180_2" name="wakeup10" dev="sysfs" ino=22502 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[   14.245038] type=1400 audit(1704719876.640:37): avc: denied { read } for comm="Binder:180_2" name="wakeup8" dev="sysfs" ino=22362 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[   14.245149] type=1400 audit(1704719876.640:38): avc: denied { read } for comm="Binder:180_2" name="wakeup6" dev="sysfs" ino=21773 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[   14.247181] type=1400 audit(1704719876.640:39): avc: denied { read } for comm="Binder:180_2" name="wakeup9" dev="sysfs" ino=22418 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[   14.247488] type=1400 audit(1704719876.640:40): avc: denied { read } for comm="Binder:180_2" name="wakeup7" dev="sysfs" ino=21813 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[   14.247669] type=1400 audit(1704719876.640:41): avc: denied { read } for comm="Binder:180_2" name="wakeup12" dev="sysfs" ino=26216 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[   14.689286] init: processing action (sys.sysctl.extra_free_kbytes=*) from (/system/etc/init/hw/init.rc:990)
[   14.691478] Freeing drm_logo memory: 732K
[   20.514310] read descriptors
[   20.514360] read strings
[   20.514446] read descriptors
[   20.514474] read strings
[   20.839932] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[   20.851128] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
[   20.851154] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
[   20.851327] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.877753] type=1400 audit(1704719883.273:48): avc: denied { read } for comm="Binder:180_2" name="wakeup9" dev="sysfs" ino=22418 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[   20.878726] type=1400 audit(1704719883.273:49): avc: denied { read } for comm="Binder:180_2" name="wakeup7" dev="sysfs" ino=21813 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[   20.878860] type=1400 audit(1704719883.273:50): avc: denied { read } for comm="Binder:180_2" name="wakeup12" dev="sysfs" ino=26216 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[   20.879149] type=1400 audit(1704719883.273:51): avc: denied { read } for comm="Binder:180_2" name="wakeup5" dev="sysfs" ino=21204 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[   20.879242] type=1400 audit(1704719883.273:52): avc: denied { read } for comm="Binder:180_2" name="wakeup10" dev="sysfs" ino=22502 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[   20.881150] type=1400 audit(1704719883.276:53): avc: denied { read } for comm="Binder:180_2" name="wakeup8" dev="sysfs" ino=22362 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=0
[   20.881862] type=1400 audit(1704719883.276:54): avc: denied { read } for comm="Binder:180_2" name="wakeup6" dev="sysfs" ino=21773 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[   21.189375] type=1400 audit(1704719883.583:55): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[   21.356439] type=1400 audit(1704719883.750:56): avc: denied { read } for comm="omx@1.0-service" name="u:object_r:default_prop:s0" dev="tmpfs" ino=19478 scontext=u:r:mediacodec:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=0
[   21.356666] type=1400 audit(1704719883.750:57): avc: denied { read } for comm="omx@1.0-service" name="u:object_r:default_prop:s0" dev="tmpfs" ino=19478 scontext=u:r:mediacodec:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=0
[   24.218082] init: Sending signal 9 to service 'idmap2d' (pid 354) process group...
[   24.224159] libprocessgroup: Successfully killed process cgroup uid 1000 pid 354 in 5ms
[   24.225204] init: Control message: Processed ctl.stop for 'idmap2d' from pid: 452 (system_server)
[   24.225671] init: Service 'idmap2d' (pid 354) received signal 9
[   25.137834] init: Service 'bootanim' (pid 183) exited with status 0 oneshot service took 21.811001 seconds in background
[   25.137876] init: Sending signal 9 to service 'bootanim' (pid 183) process group...
[   25.138085] libprocessgroup: Successfully killed process cgroup uid 1003 pid 183 in 0ms
[   25.265153] init: processing action (sys.boot_completed=1) from (/system/etc/init/hw/init.rc:981)
[   25.265762] init: starting service 'exec 14 (/bin/rm -rf /data/per_boot)'...
[   25.268753] init: SVC_EXEC service 'exec 14 (/bin/rm -rf /data/per_boot)' pid 1188 (uid 1000 gid 1000+0 context default) started; waiting...
[   25.662535] zram0: detected capacity change from 0 to 1022517248
[   25.679252] mkswap: Swapspace size: 998548k, UUID=cf708506-1a49-4d1c-8691-8ca4e2e4825c
[   25.684826] Adding 998548k swap on /dev/block/zram0.  Priority:-2 extents:1 across:998548k SS
[   25.932097] type=1400 audit(1704719888.326:94): avc: denied { read } for comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=26302 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[   25.994079] type=1400 audit(1704719888.386:95): avc: denied { read } for comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=26309 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[   27.190413] type=1400 audit(1704719889.583:96): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[   30.190693] type=1400 audit(1704719892.583:97): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[   32.053976] vcc_mipi: disabling
[   33.190870] type=1400 audit(1704719895.583:98): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[   34.777751] type=1400 audit(1704719897.173:99): avc: denied { read } for comm=".update.service" name="u:object_r:serialno_prop:s0" dev="tmpfs" ino=19564 scontext=u:r:system_app:s0 tcontext=u:object_r:serialno_prop:s0 tclass=file permissive=0
[   34.778341] type=1400 audit(1704719897.173:100): avc: denied { read } for comm=".update.service" name="u:object_r:serialno_prop:s0" dev="tmpfs" ino=19564 scontext=u:r:system_app:s0 tcontext=u:object_r:serialno_prop:s0 tclass=file permissive=0
[   36.194855] type=1400 audit(1704719898.586:101): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[   39.195767] type=1400 audit(1704719901.590:102): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[   42.195747] type=1400 audit(1704719904.590:103): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[   44.448890] type=1400 audit(1704719906.843:104): avc: denied { read } for comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=37048 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[   45.196695] type=1400 audit(1704719907.590:105): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[   48.197413] type=1400 audit(1704719910.593:106): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[   50.522401] type=1400 audit(1704719912.916:107): avc: denied { read } for comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=26302 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[   51.197961] type=1400 audit(1704719913.593:108): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[   54.198766] type=1400 audit(1704719916.593:109): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[   54.475676] type=1400 audit(1704719916.870:110): avc: denied { read } for comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=37048 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[   57.199558] type=1400 audit(1704719919.593:111): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[   60.200363] type=1400 audit(1704719922.596:112): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=0
[   60.974708] type=1404 audit(1704719923.370:113): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1

[   61.295274] selinux: avc:  received setenforce notice (enforcing=0)
[   61.295331] selinux: 

[   63.201013] type=1400 audit(1704719925.593:114): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=1
[   63.201447] type=1400 audit(1704719925.596:115): avc: denied { open } for comm="rild" path="/dev/ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=1
[   63.202511] type=1400 audit(1704719925.596:116): avc: denied { ioctl } for comm="rild" path="/dev/ttyUSB2" dev="tmpfs" ino=3649 ioctlcmd=0x5401 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=1
[   64.032494] type=1400 audit(1704719926.426:117): avc: denied { read } for comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=26309 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
[   64.032728] type=1400 audit(1704719926.426:118): avc: denied { open } for comm="memtrack@1.0-se" path="/sys/kernel/debug/mali0/ctx/675_3/mem_profile" dev="debugfs" ino=26309 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
[   64.032840] type=1400 audit(1704719926.426:119): avc: denied { getattr } for comm="memtrack@1.0-se" path="/sys/kernel/debug/mali0/ctx/675_3/mem_profile" dev="debugfs" ino=26309 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
[   66.449483] type=1400 audit(1704719928.843:120): avc: denied { read write } for comm="rild" name="cdc-wdm0" dev="tmpfs" ino=3651 scontext=u:r:rild:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[   66.449648] type=1400 audit(1704719928.843:121): avc: denied { open } for comm="rild" path="/dev/cdc-wdm0" dev="tmpfs" ino=3651 scontext=u:r:rild:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
[   66.929972] type=1400 audit(1704719929.323:122): avc: denied { write } for comm="Binder:253_3" name="mtu" dev="sysfs" ino=29983 scontext=u:r:netd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   66.930337] type=1400 audit(1704719929.323:123): avc: denied { open } for comm="Binder:253_3" path="/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.7/2-1.7:1.4/net/wwan0/mtu" dev="sysfs" ino=29983 scontext=u:r:netd:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   66.966307] init: processing action (sys.sysctl.tcp_def_init_rwnd=*) from (/system/etc/init/hw/init.rc:994)
[   67.605382] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[   92.229023] type=1400 audit(1704719954.623:124): avc: denied { read } for comm="Binder:180_2" name="wakeup9" dev="sysfs" ino=22418 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=1
[   92.229257] type=1400 audit(1704719954.623:125): avc: denied { open } for comm="Binder:180_2" path="/sys/devices/virtual/power_supply/test_battery/wakeup9" dev="sysfs" ino=22418 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs_power:s0 tclass=dir permissive=1
[   92.230450] type=1400 audit(1704719954.623:126): avc: denied { read } for comm="Binder:180_2" name="wakeup7" dev="sysfs" ino=21813 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[   92.230755] type=1400 audit(1704719954.623:127): avc: denied { open } for comm="Binder:180_2" path="/sys/devices/platform/ff3c0000.i2c/i2c-0/0-001b/rk808-rtc/rtc/rtc0/wakeup7" dev="sysfs" ino=21813 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[   92.230933] type=1400 audit(1704719954.623:128): avc: denied { read } for comm="Binder:180_2" name="event_count" dev="sysfs" ino=21820 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   92.231070] type=1400 audit(1704719954.623:129): avc: denied { open } for comm="Binder:180_2" path="/sys/devices/platform/ff3c0000.i2c/i2c-0/0-001b/rk808-rtc/rtc/rtc0/wakeup7/event_count" dev="sysfs" ino=21820 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   92.231207] type=1400 audit(1704719954.623:130): avc: denied { getattr } for comm="Binder:180_2" path="/sys/devices/platform/ff3c0000.i2c/i2c-0/0-001b/rk808-rtc/rtc/rtc0/wakeup7/event_count" dev="sysfs" ino=21820 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1

console:/ $ 
console:/ $ 
console:/ $ 


6、打开USB串口/dev/ttyUSB2的权限:无效
Z:\3TB\76Android11.0\device\rockchip\common\ueventd.rockchip.rc
#for hid audio
/dev/hidraw0              0660   audio  audio

# for serial
/dev/ttyS4                0660   system     system

#for ec20 modem 2024/1/5 22:25
# for radio
/dev/ttyUSB*              0660   radio     radio
/dev/ttyACM*              0666   radio          radio
/dev/cdc-wdm*             0666   radio          radio
/dev/qcqmi*               0660   radio          radio
#for ec20 modem 2024/1/5 22:25

# for mali-t764
/dev/mali0                 0666   system        system

修改为:
#for hid audio
/dev/hidraw0              0660   audio  audio

#for ec20 modem 2024/1/5 22:25
# for radio
/dev/ttyUSB0              0660   radio        radio
/dev/ttyUSB1              0660   radio        radio
/dev/ttyUSB2              0777   radio        radio
/dev/ttyUSB3              0660   radio        radio
/dev/ttyUSB4              0660   radio        radio
/dev/ttyUSB5              0660   radio        radio
/dev/ttyUSB6              0660   radio        radio
/dev/ttyUSB7              0660   radio        radio
/dev/ttyUSB8              0660   radio        radio
/dev/ttyUSB9              0660   radio        radio

/dev/ttyACM*              0666   radio          radio
/dev/cdc-wdm*             0666   radio          radio
/dev/qcqmi*               0660   radio          radio
#for ec20 modem 2024/1/5 22:25

# for mali-t764
/dev/mali0                 0666   system        system


[   63.201013] type=1400 audit(1704719925.593:114): avc: denied { read write } for comm="rild" name="ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=1
[   63.201447] type=1400 audit(1704719925.596:115): avc: denied { open } for comm="rild" path="/dev/ttyUSB2" dev="tmpfs" ino=3649 scontext=u:r:rild:s0 tcontext=u:object_r:usb_serial_device:s0 tclass=chr_file permissive=1

7、继续跟踪在 今日头条搜索:RK3399 EC20 ttyUSB0

基本可以确认是selinux的问题!
通过adb/串口配置selinux即可上网了!

https://blog.csdn.net/ezconn/article/details/108351278?spm=1001.2101.3001.6650.14&utm_medium=distribute.wap_relevant.none-task-blog-2~default~BlogCommendFromBaidu~Rate-14-108351278-blog-118994932.237%5Ev3%5Ewap_relevant_t0_download&depth_1-utm_source=distribute.wap_relevant.none-task-blog-2~default~BlogCommendFromBaidu~Rate-14-108351278-blog-118994932.237%5Ev3%5Ewap_relevant_t0_download&share_token=88af91e9-96e5-47ed-b029-1bee0141bab2
https://blog.csdn.net/ezconn/article/details/108351278
Android 串口打开失败几种原因及解决办法

串口打开失败目前遇到以下几种问题:
第一个问题
问题:点击Setup闪退,如果是NullPointerException异常,主要是获取dev目录下的设备号为空;或者说获取的设备号数组为空;获取不到串口号;
可能引起的原因:Android系统防火墙打开了,所以需要关闭;具体步骤如下

解决方法: 
a,cmd 中输入adb root 获取root权限
b,adb remount (有的不需要执行这条命令)
c,adb shell
d,setenforce 0 关闭防火墙(注意:重启后失效,需重新设置)
e,getenforce 查看当前权限状态


8、【友善之臂的Android11的SDK:rk3399-android-11-r20211216.tar.xz不需要关闭selinux既可以跑通EC20的4G上网!】
关闭selinux会导致系统起不来!原因不明。
极其可能与Firefly在uboot中配置optee有关系!押后处理!

Z:\3TB\76Android11.0\device\rockchip\common\BoardConfig.mk
# Enable android verified boot 2.0
BOARD_AVB_ENABLE ?= false
BOARD_BOOT_HEADER_VERSION ?= 2
BOARD_MKBOOTIMG_ARGS :=
BOARD_PREBUILT_DTBOIMAGE ?= $(TARGET_DEVICE_DIR)/dtbo.img
BOARD_ROCKCHIP_VIRTUAL_AB_ENABLE ?= false
BOARD_SELINUX_ENFORCING ?= true

修改为:
# Enable android verified boot 2.0
BOARD_AVB_ENABLE ?= false
BOARD_BOOT_HEADER_VERSION ?= 2
BOARD_MKBOOTIMG_ARGS :=
BOARD_PREBUILT_DTBOIMAGE ?= $(TARGET_DEVICE_DIR)/dtbo.img
BOARD_ROCKCHIP_VIRTUAL_AB_ENABLE ?= false
BOARD_SELINUX_ENFORCING ?= false


出错的LOG:
U-Boot 2017.09 (Jan 07 2024 - 22:03:00 +0800)

Model: Rockchip RK3399 Evaluation Board
PreSerial: 2, raw, 0xff1a0000
DRAM:  2 GiB
Sysmem: init
Relocation Offset: 7db7a000
Relocation fdt: 7bd6e2d0 - 7bd70ceb
CR: M/C/I
Using default environment

dwmmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 150Mhz
PartType: EFI
boot mode: normal
Android 11.0, Build 2021.6, v2
Found DTB in boot part
DTB: rk-kernel.dtb
HASH(c): OK
ANDROID: fdt overlay OK
I2c0 speed: 400000Hz
PMIC:  RK808 
vdd_center 900000 uV
vdd_cpu_l 1075000 uV
vdd_log 1100000 uV
Model: Rockchip RK3399 Excavator Board edp avb (Android)
Rockchip UBOOT DRM driver version: v1.0.1
disp info 0, type:11, id:0
xfer: num: 2, addr: 0x50
xfer: num: 2, addr: 0x50
Monitor has basic audio support
base_parameter.mode:1920x1080
mode:1920x1080
Detailed mode clock 148500 kHz, flags[5]
    H: 1920 2008 2052 2200
    V: 1080 1084 1089 1125
bus_format: 100a
CEA mode used vic=16
final pixclk = 148500000 tmdsclk = 148500000
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
sink has audio support
hdmi_set_clk_regenerator: fs=48000Hz ftdms=148.500MHz N=6144 cts=148500
Using display timing dts
Detailed mode clock 200000 kHz, flags[a]
    H: 1536 1548 1564 1612
    V: 2048 2056 2060 2068
bus_format: 100e
AUX CH command reply failed!
AUX CH error happens: 2
AUX CH command reply failed!
AUX CH error happens: 2
AUX CH command reply failed!
AUX CH error happens: 2
failed to get Rx Max Link Rate
failed to init training
unable to do link train
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  aplll 816000 KHz
  apllb 816000 KHz
  dpll 856000 KHz
  cpll 200000 KHz
  gpll 800000 KHz
  npll 600000 KHz
  vpll 148000 KHz
  aclk_perihp 133333 KHz
  hclk_perihp 66666 KHz
  pclk_perihp 33333 KHz
  aclk_perilp0 266666 KHz
  hclk_perilp0 88888 KHz
  pclk_perilp0 44444 KHz
  hclk_perilp1 100000 KHz
  pclk_perilp1 50000 KHz
Net:   eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'):  0 
emmc boot 
No FDT memory address configured. Default at 0x08300000
libfdt fdt_getprop(): FDT_ERR_NOTFOUND
lzf debug,store_value=Rockchip RK3399 Excavator Board edp avb (Android)
ANDROID: reboot reason: "(none)"
optee api revision: 2.0
Vboot=0, AVB images, AVB verify
read_is_device_unlocked() ops returned that device is UNLOCKED
avb_slot_verify.c:762: ERROR: vbmeta: Error verifying vbmeta image: OK_NOT_SIGNED
get image from preloaded partition...
Could not find "system" partition
Booting IMAGE kernel at 0x00280000 with fdt at 0x08300000...


Fdt Ramdisk skip relocation
## Booting Android Image at 0x0027f800 ...
Kernel load addr 0x00280000 size 31031 KiB
RAM disk load addr 0x0a200000 size 819 KiB
## Flattened Device Tree blob at 0x08300000
   Booting using the fdt blob at 0x08300000
   XIP Kernel Image from 0x00280000 to 0x00280000 ... OK
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000831dead
failed to reserve drm-cubic-lut memory
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0x80000000 (size: 0x75e00000)
Total: 1209.550 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 4.19.193 (rootroot@rootroot-X99-Turbo) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05), GNU ld (Linaro_Binutils-2017.05) 2.27.0.20161019) #1 SMP PREEMPT Sun Jan 7 22:06:45 CST 2024
[    0.000000] Machine model: Rockchip RK3399 Excavator Board edp avb (Android)
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
[    0.000000] bootconsole [uart8250] enabled
[    0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB
[    0.000000] cma: Reserved 16 MiB at 0x000000007f000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 24 pages/cpu s58968 r8192 d31144 u98304
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 507912
[    0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.dtb_idx=0 androidboot.dtbo_idx=0  androidboot.verifiedbootstate=orange androidboot.slot_suffix= androidboot.serialno=62089c75a9d193d6 console=ttyFIQ0 androidboot.baseband=N/A androidboot.wificountrycode=CN androidboot.veritymode=enforcing androidboot.hardware=rk30board androidboot.console=ttyFIQ0 androidboot.verifiedbootstate=orange firmware_class.path=/vendor/etc/firmware init=/init rootwait ro loop.max_part=7 androidboot.selinux=permissive buildvariant=userdebug earlycon=uart8250,mmio32,0xff1a0000 coherent_pool=1m androidboot.boot_devices=fe330000.sdhci
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1975012K/2064384K available (15422K kernel code, 2102K rwdata, 9280K rodata, 4160K init, 2198K bss, 72988K reserved, 16384K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000]     Tasks RCU enabled.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @a300000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x0000000000270000
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x000000000a380000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] random: random: get_random_bytes called from start_kernel+0x36c/0x4f0 with crng_init=0
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002040] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.003016] pid_max: default: 32768 minimum: 301
[    0.003592] Security Framework initialized
[    0.003987] SELinux:  Initializing.
[    0.004429] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.005071] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.007371] ASID allocator initialised with 32768 entries
[    0.007987] rcu: Hierarchical SRCU implementation.
[    0.008876] Platform MSI: interrupt-controller@fee20000 domain created
[    0.010079] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.011717] smp: Bringing up secondary CPUs ...
[    0.012770] Detected VIPT I-cache on CPU1
[    0.012809] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.012854] CPU1: using LPI pending table @0x000000007e110000
[    0.012905] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.013732] Detected VIPT I-cache on CPU2
[    0.013770] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.013815] CPU2: using LPI pending table @0x000000007e160000
[    0.013865] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.014678] Detected VIPT I-cache on CPU3
[    0.014714] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.014758] CPU3: using LPI pending table @0x000000007e190000
[    0.014808] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.015641] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.015647] CPU features: enabling workaround for EL2 vector hardening
[    0.015656] Detected PIPT I-cache on CPU4
[    0.015681] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.015737] CPU4: using LPI pending table @0x000000007e1e0000
[    0.015771] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.016532] Detected PIPT I-cache on CPU5
[    0.016559] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.016614] CPU5: using LPI pending table @0x000000007e1f0000
[    0.016648] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.016757] smp: Brought up 1 node, 6 CPUs
[    0.029306] SMP: Total of 6 processors activated.
[    0.029754] CPU features: detected: GIC system register CPU interface
[    0.030382] CPU features: detected: 32-bit EL0 Support
[    0.036877] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.037683] CPU: All CPU(s) started at EL2
[    0.038108] alternatives: patching kernel code
[    0.039960] devtmpfs: initialized
[    0.054519] Trying to unpack rootfs image as initramfs...
[    0.055036] Registered cp15_barrier emulation handler
[    0.055522] Registered setend emulation handler
[    0.056319] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.057238] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.058193] pinctrl core: initialized pinctrl subsystem
[    0.059488] NET: Registered protocol family 16
[    0.062809] schedtune: configured to support 6 boost groups
[    0.063634] audit: initializing netlink subsys (disabled)
[    0.065217] audit: type=2000 audit(0.059:1): state=initialized audit_enabled=0 res=1
[    0.066042] cpuidle: using governor menu
[    0.066425] Registered FIQ tty driver
[    0.067349] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.080381] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.084210] console [pstore-1] enabled
[    0.084709] pstore: Registered ramoops as persistent store backend
[    0.085292] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[    0.097453] Freeing initrd memory: 816K
[    0.104399] rockchip-gpio ff720000.gpio0: probed gpio0 (ff720000.gpio0)
[    0.105359] rockchip-gpio ff730000.gpio1: probed gpio1 (ff730000.gpio1)
[    0.106312] rockchip-gpio ff780000.gpio2: probed gpio2 (ff780000.gpio2)
[    0.107273] rockchip-gpio ff788000.gpio3: probed gpio3 (ff788000.gpio3)
[    0.108339] rockchip-gpio ff790000.gpio4: probed gpio4 (ff790000.gpio4)
[    0.109016] rockchip-pinctrl pinctrl: probed pinctrl
[    0.118196] cryptd: max_cpu_qlen set to 1000
[    0.119613] fiq debugger fiq mode enabled
[[    0.120209] console [ttyFIQ0] enabled
    0.120209] console [ttyFIQ0] enabled
[    0.120880] bootconsole [uart8250] disabled
[    0.120880] bootconsole [uart8250] disabled
[    0.121419] Registered fiq debugger ttyFIQ0
[    0.121977] vcc1v8_s3: regulator get failed, ret=-517
[    0.122221] vcc3v0_sd: regulator get failed, ret=-517
[    0.122408] vcc3v3_sys: regulator get failed, ret=-517
[    0.122587] vcc_sys: supplied by dc_12v
[    0.122906] vcc5v0_host: supplied by vcc_sys
[    0.122995] vcc3v3_sys: supplied by vcc_sys
[    0.123035] vcc3v0_sd: supplied by vcc3v3_sys
[    0.150481] vcc_lcd: supplied by vcc5v0_sys
[    0.151192] rk_iommu ff650800.iommu: version = 1
[    0.151596] rk_iommu ff660480.iommu: version = 1
[    0.151853] rk_iommu ff670800.iommu: version = 1
[    0.152119] rk_iommu ff8f3f00.iommu: version = 1
[    0.152319] rk_iommu ff903f00.iommu: version = 1
[    0.152513] rk_iommu ff914000.iommu: version = 1
[    0.152758] rk_iommu ff924000.iommu: version = 1
[    0.153262] SCSI subsystem initialized
[    0.153423] usbcore: registered new interface driver usbfs
[    0.153462] usbcore: registered new interface driver hub
[    0.153501] usbcore: registered new device driver usb
[    0.153751] media: Linux media interface: v0.10
[    0.153783] videodev: Linux video capture interface: v2.00
[    0.153839] pps_core: LinuxPPS API ver. 1 registered
[    0.153851] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.153866] PTP clock support registered
[    0.155676] Advanced Linux Sound Architecture Driver Initialized.
[    0.155988] Bluetooth: Core ver 2.22
[    0.156025] NET: Registered protocol family 31
[    0.156038] Bluetooth: HCI device and connection manager initialized
[    0.156050] Bluetooth: HCI socket layer initialized
[    0.156063] Bluetooth: L2CAP socket layer initialized
[    0.156096] Bluetooth: SCO socket layer initialized
[    0.156444] rockchip-cpuinfo cpuinfo: SoC        : 0
[    0.156461] rockchip-cpuinfo cpuinfo: Serial        : 62089c75a9d193d6
[    0.157169] clocksource: Switched to clocksource arch_sys_counter
[    0.214225] VFS: Disk quotas dquot_6.6.0
[    0.214305] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.215595] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.215814] NET: Registered protocol family 2
[    0.216296] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[    0.216345] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.216493] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.216748] TCP: Hash tables configured (established 16384 bind 16384)
[    0.216854] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.216912] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.217067] NET: Registered protocol family 1
[    0.219158] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.219446] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.220833] Initialise system trusted keyrings
[    0.221001] workingset: timestamp_bits=45 max_order=19 bucket_order=0
[    0.224890] utf8_selftest: All 154 tests passed
[    0.224908] fuse init (API version 7.27)
[    0.225943] 
[    0.225943] TEE Core Framework initialization (ver 1:0.1)
[    0.225968] TEE armv7 Driver initialization
[    0.226328] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[    0.226345] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[    0.226496] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[    0.227616] Key type asymmetric registered
[    0.227632] Asymmetric key parser 'x509' registered
[    0.227668] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.227682] io scheduler noop registered
[    0.227782] io scheduler cfq registered (default)
[    0.227796] io scheduler mq-deadline registered
[    0.227804] io scheduler kyber registered
[    0.227874] io scheduler bfq registered
[    0.229468] phy phy-ff770000.syscon:usb2-phy@e450.1: Linked as a consumer to regulator.6
[    0.229820] phy phy-ff770000.syscon:usb2-phy@e450.2: No vbus specified for otg port
[    0.230964] phy phy-ff770000.syscon:usb2-phy@e460.3: Linked as a consumer to regulator.6
[    0.231262] phy phy-ff770000.syscon:usb2-phy@e460.4: No vbus specified for otg port
[    0.232674] rockchip-mipi-dphy-rx ff770000.syscon:mipi-dphy-rx0: invalid resource
[    0.235825] rockchip-pcie f8000000.pcie: missing "memory-region" property
[    0.235958] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[    0.235981] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    0.236002] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    0.236022] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    0.236046] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[    0.236070] rockchip-pcie f8000000.pcie:   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[    0.236087] rockchip-pcie f8000000.pcie:    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[    0.787208] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    0.787233] rockchip-pcie f8000000.pcie: deferred probe failed
[    0.787318] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    0.787943] pwm-backlight backlight: backlight supply power not found, using dummy regulator
[    0.788009] pwm-backlight backlight: Linked as a consumer to regulator.0
[    0.788300] iommu: Adding device ff670000.iep to group 2
[    0.788327] iep ff670000.iep: Linked as a consumer to ff670800.iommu
[    0.788487] iep: failed to find iep power down clock source.
[    0.788789] iep: IEP Power ON
[    0.788827] iep: IEP Power OFF
[    0.788893] iep: IEP Driver loaded succesfully
[    0.789054] iep: Module initialized.
[    0.789175] mpp_service mpp-srv: unknown mpp version for missing VCS info
[    0.789185] mpp_service mpp-srv: probe start
[    0.789515] iommu: Adding device ff660000.rkvdec to group 1
[    0.789547] mpp_rkvdec ff660000.rkvdec: Linked as a consumer to ff660480.iommu
[    0.789724] mpp_rkvdec ff660000.rkvdec: probing start
[    0.790078] rkvdec_init:1219: failed on clk_get clk_hevc_cabac
[    0.790188] mpp_rkvdec ff660000.rkvdec: shared_video_hevc_cabac is not found!
[    0.790210] rkvdec_init:1250: No hevc cabac reset resource define
[    0.790415] mpp_rkvdec ff660000.rkvdec: probing finish
[    0.791844] iommu: Adding device ff650400.vdpu to group 0
[    0.791876] mpp_vdpu2 ff650400.vdpu: Linked as a consumer to ff650800.iommu
[    0.792126] mpp_vdpu2 ff650400.vdpu: probe device
[    0.792461] mpp_vdpu2 ff650400.vdpu: reset_group->rw_sem_on=0
[    0.792484] mpp_vdpu2 ff650400.vdpu: reset_group->rw_sem_on=0
[    0.792672] mpp_vdpu2 ff650400.vdpu: probing finish
[    0.793085] iommu: Adding device ff650000.vepu to group 0
[    0.793132] mpp_vepu2 ff650000.vepu: Linked as a consumer to ff650800.iommu
[    0.793186] mpp_vepu2 ff650000.vepu: probe device
[    0.793578] mpp_vepu2 ff650000.vepu: reset_group->rw_sem_on=0
[    0.793596] mpp_vepu2 ff650000.vepu: reset_group->rw_sem_on=0
[    0.793785] mpp_vepu2 ff650000.vepu: probing finish
[    0.794601] mpp_service mpp-srv: probe success
[    0.797785] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.797807] dma-pl330 ff6d0000.dma-controller:     DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    0.799347] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.799371] dma-pl330 ff6e0000.dma-controller:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.800757] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    0.801354] vdd_log: supplied by regulator-dummy
[    0.801957] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.802639] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
[    0.804638] random: fast init done
[    0.804920] random: crng init done
[    0.804935] iommu: Adding device ff8f0000.vop to group 3
[    0.804978] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu
[    0.805275] iommu: Adding device ff900000.vop to group 4
[    0.805309] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu
[    0.809533] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop
[    0.809574] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop
[    0.810549] rockchip-drm display-subsystem: Linked as a consumer to ff970000.edp
[    0.811042] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi
[    0.818140] panel-simple panel: Linked as a consumer to regulator.8
[    0.818186] panel-simple panel: panel supply vsp not found, using dummy regulator
[    0.818245] panel-simple panel: Linked as a consumer to regulator.0
[    0.818274] panel-simple panel: panel supply vsn not found, using dummy regulator
[    0.819247] midgard ff9a0000.gpu: Failed to get regulator
[    0.819268] midgard ff9a0000.gpu: Power control initialization failed
[    0.819764] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.826744] brd: module loaded
[    0.839389] loop: module loaded
[    0.839714] zram: Added device: zram0
[    0.839984] SCSI Media Changer driver v0.25 
[    0.842014] libphy: Fixed MDIO Bus: probed
[    0.842051] tun: Universal TUN/TAP device driver, 1.6
[    0.842667] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[    0.842707] rk_gmac-dwmac fe300000.ethernet: phy regulator is not available yet, deferred probing
[    0.843334] PPP generic driver version 2.4.2
[    0.843457] PPP BSD Compression module registered
[    0.843471] PPP Deflate Compression module registered
[    0.843498] PPP MPPE Compression module registered
[    0.843508] NET: Registered protocol family 24
[    0.843528] PPTP driver version 0.8.5
[    0.843807] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    0.843818] CSLIP: code copyright 1989 Regents of the University of California.
[    0.843915] usbcore: registered new interface driver catc
[    0.843952] usbcore: registered new interface driver kaweth
[    0.843964] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    0.843993] usbcore: registered new interface driver pegasus
[    0.844026] usbcore: registered new interface driver rtl8150
[    0.844062] usbcore: registered new interface driver r8152
[    0.844072] hso: drivers/net/usb/hso.c: Option Wireless
[    0.844116] usbcore: registered new interface driver hso
[    0.844149] usbcore: registered new interface driver asix
[    0.844182] usbcore: registered new interface driver ax88179_178a
[    0.844214] usbcore: registered new interface driver cdc_ether
[    0.844246] usbcore: registered new interface driver cdc_eem
[    0.844278] usbcore: registered new interface driver dm9601
[    0.844315] usbcore: registered new interface driver smsc75xx
[    0.844351] usbcore: registered new interface driver smsc95xx
[    0.844386] usbcore: registered new interface driver gl620a
[    0.844418] usbcore: registered new interface driver net1080
[    0.844450] usbcore: registered new interface driver plusb
[    0.844479] usbcore: registered new interface driver rndis_host
[    0.844512] usbcore: registered new interface driver cdc_subset
[    0.844546] usbcore: registered new interface driver zaurus
[    0.844582] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    0.844617] usbcore: registered new interface driver int51x1
[    0.844650] usbcore: registered new interface driver kalmia
[    0.844682] usbcore: registered new interface driver ipheth
[    0.844715] usbcore: registered new interface driver sierra_net
[    0.844748] usbcore: registered new interface driver cx82310_eth
[    0.844785] usbcore: registered new interface driver cdc_ncm
[    0.844831] usbcore: registered new interface driver qmi_wwan_q
[    0.844864] usbcore: registered new interface driver cdc_mbim
[    0.845735] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
[    0.850058] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
[    0.854792] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.854809] ehci-pci: EHCI PCI platform driver
[    0.854862] ehci-platform: EHCI generic platform driver
[    0.858387] ehci-platform fe380000.usb: EHCI Host Controller
[    0.858529] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[    0.858809] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
[    0.870528] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    0.870669] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.870685] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.870710] usb usb1: Product: EHCI Host Controller
[    0.870721] usb usb1: Manufacturer: Linux 4.19.193 ehci_hcd
[    0.870733] usb usb1: SerialNumber: fe380000.usb
[    0.871138] hub 1-0:1.0: USB hub found
[    0.871174] hub 1-0:1.0: 1 port detected
[    0.873596] ehci-platform fe3c0000.usb: EHCI Host Controller
[    0.873756] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[    0.874031] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
[    0.887194] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    0.887323] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.887342] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.887362] usb usb2: Product: EHCI Host Controller
[    0.887375] usb usb2: Manufacturer: Linux 4.19.193 ehci_hcd
[    0.887388] usb usb2: SerialNumber: fe3c0000.usb
[    0.887720] hub 2-0:1.0: USB hub found
[    0.887754] hub 2-0:1.0: 1 port detected
[    0.888260] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.888288] ohci-platform: OHCI generic platform driver
[    0.888481] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    0.888643] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[    0.888840] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
[    0.947984] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    0.948003] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.948013] usb usb3: Product: Generic Platform OHCI controller
[    0.948022] usb usb3: Manufacturer: Linux 4.19.193 ohci_hcd
[    0.948031] usb usb3: SerialNumber: fe3a0000.usb
[    0.948362] hub 3-0:1.0: USB hub found
[    0.948403] hub 3-0:1.0: 1 port detected
[    0.948787] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    0.948932] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[    0.949110] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
[    1.007980] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.007999] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.008009] usb usb4: Product: Generic Platform OHCI controller
[    1.008017] usb usb4: Manufacturer: Linux 4.19.193 ohci_hcd
[    1.008026] usb usb4: SerialNumber: fe3e0000.usb
[    1.008377] hub 4-0:1.0: USB hub found
[    1.008417] hub 4-0:1.0: 1 port detected
[    1.009446] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    1.009629] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 5
[    1.010154] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000009002030010
[    1.010205] xhci-hcd xhci-hcd.1.auto: irq 76, io mem 0xfe900000
[    1.010474] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.010486] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.010528] usb usb5: Product: xHCI Host Controller
[    1.010538] usb usb5: Manufacturer: Linux 4.19.193 xhci-hcd
[    1.010552] usb usb5: SerialNumber: xhci-hcd.1.auto
[    1.010932] hub 5-0:1.0: USB hub found
[    1.010981] hub 5-0:1.0: 1 port detected
[    1.011283] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    1.011422] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 6
[    1.011453] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    1.011555] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.011662] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    1.011685] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.011706] usb usb6: Product: xHCI Host Controller
[    1.011750] usb usb6: Manufacturer: Linux 4.19.193 xhci-hcd
[    1.011771] usb usb6: SerialNumber: xhci-hcd.1.auto
[    1.012111] hub 6-0:1.0: USB hub found
[    1.012153] hub 6-0:1.0: 1 port detected
[    1.012562] usbcore: registered new interface driver cdc_acm
[    1.012585] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.012643] usbcore: registered new interface driver usblp
[    1.012734] usbcore: registered new interface driver cdc_wdm
[    1.012911] usbcore: registered new interface driver uas
[    1.013035] usbcore: registered new interface driver usb-storage
[    1.013087] usbcore: registered new interface driver ums-alauda
[    1.013137] usbcore: registered new interface driver ums-cypress
[    1.013222] usbcore: registered new interface driver ums-datafab
[    1.013273] usbcore: registered new interface driver ums_eneub6250
[    1.013322] usbcore: registered new interface driver ums-freecom
[    1.013374] usbcore: registered new interface driver ums-isd200
[    1.013461] usbcore: registered new interface driver ums-jumpshot
[    1.013510] usbcore: registered new interface driver ums-karma
[    1.013559] usbcore: registered new interface driver ums-onetouch
[    1.013609] usbcore: registered new interface driver ums-sddr09
[    1.013694] usbcore: registered new interface driver ums-sddr55
[    1.013745] usbcore: registered new interface driver ums-usbat
[    1.013823] usbcore: registered new interface driver usbserial_generic
[    1.013977] usbserial: USB Serial support registered for generic
[    1.014032] usbcore: registered new interface driver option
[    1.014066] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.014296] usbcore: registered new interface driver trancevibrator
[    1.014838] usbcore: registered new interface driver xpad
[    1.014932] usbcore: registered new interface driver usb_acecad
[    1.014986] usbcore: registered new interface driver aiptek
[    1.015041] usbcore: registered new interface driver gtco
[    1.015093] usbcore: registered new interface driver hanwang
[    1.015167] usbcore: registered new interface driver kbtab
[    1.015457] cyttsp5_loader_init: Parade TTSP FW Loader Driver (Built TTDA.03.08.874312) rc=0
[    1.015473] cyttsp5_device_access_init: Parade TTSP Device Access Driver (Built TTDA.03.08.874312) rc=0
[    1.016410] i2c /dev entries driver
[    1.017585] input: gsl3673 as /devices/platform/ff110000.i2c/i2c-1/1-0040/input/input0
[    1.082642] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_SDP_CHARGER
[    1.090669] gsl3673 1-0040: GSL3673 test_i2c error!
[    1.090728] gsl3673 1-0040: gsl_probe: init_chip failed
[    1.091022] gsl3673: probe of 1-0040 failed with error -1
[    1.091580] i2c i2c-1: 1 i2c clients have been registered at 0x0c
[    1.091741] i2c i2c-1: 1 i2c clients have been registered at 0x10
[    1.093062] rk808 0-001b: chip id: 0x0
[    1.093167] chensq power_en_active0 is 0x0,rk808_probe--1319
[    1.096273] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.096307] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.097007] vdd_center: supplied by vcc_sys
[    1.097588] vdd_cpu_l: supplied by vcc_sys
[    1.097882] vcc_ddr: supplied by vcc_sys
[    1.098421] vcc_1v8: supplied by vcc_sys
[    1.099094] vcc1v8_dvp: supplied by vcc_sys
[    1.099535] vcc3v0_tp: supplied by vcc_sys
[    1.100122] vcc1v8_pmu: supplied by vcc_sys
[    1.100700] vcc_sdio: supplied by vcc_sys
[    1.101103] vcca3v0_codec: supplied by vcc_sys
[    1.101707] vcc_1v5: supplied by vcc_sys
[    1.102120] vcca1v8_codec: supplied by vcc_sys
[    1.102728] vcc_3v0: supplied by vcc_sys
[    1.103009] vcc3v3_s3: supplied by vcc3v3_sys
[    1.103317] vcc3v3_s0: supplied by vcc3v3_sys
[    1.106285] rk808-rtc rk808-rtc: registered as rtc0
[    1.106805] rk808-rtc rk808-rtc: setting system clock to 2024-01-08 12:08:46 UTC (1704715726)
[    1.107330] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    1.108281] vdd_cpu_b: supplied by vcc_sys
[    1.108527] vcc1v8_s3: supplied by vcc_1v8
[    1.109022] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    1.109963] vdd_gpu: supplied by vcc_sys
[    1.110869] gsensor_mpu6500 4-0068: sensor_register_device: mpu6500_acc, id = 29
[    1.110892] i2c i2c-4: sensor_probe: mpu6500_acc,00000000b142c779
[    1.110933] gsensor_mpu6500 4-0068: sensor_chip_init:mpu6500_acc:devid=0x0,ops=0x000000008c54ba35
[    1.111257] gsensor_mpu6500 4-0068: set MPU6500_PWR_MGMT_1 error,res: -6!
[    1.111273] gsensor_mpu6500 4-0068: sensor_initial:fail to init sensor
[    1.111286] gsensor_mpu6500 4-0068: sensor_chip_init:fail to init sensor
[    1.111299] i2c i2c-4: sensor_probe failed -2
[    1.111299] 
[    1.111341] i2c i2c-4: 1 i2c clients have been registered at 0x68
[    1.111864] vm149c 1-000c: probing...
[    1.111876] vm149c 1-000c: driver version: 00.01.00
[    1.111886] vm149c 1-000c: could not get module rockchip,vcm-max-current from dts!
[    1.111905] vm149c 1-000c: could not get module rockchip,vcm-start-current from dts!
[    1.111918] vm149c 1-000c: could not get module rockchip,vcm-rated-current from dts!
[    1.111931] vm149c 1-000c: could not get module rockchip,vcm-step-mode from dts!
[    1.111964] vm149c 1-000c: probing successful
[    1.112020] vm149c 1-000c-1: probing...
[    1.112036] vm149c 1-000c-1: driver version: 00.01.00
[    1.112049] vm149c 1-000c-1: could not get module rockchip,vcm-max-current from dts!
[    1.112062] vm149c 1-000c-1: could not get module rockchip,vcm-start-current from dts!
[    1.112075] vm149c 1-000c-1: could not get module rockchip,vcm-rated-current from dts!
[    1.112088] vm149c 1-000c-1: could not get module rockchip,vcm-step-mode from dts!
[    1.112113] vm149c 1-000c-1: probing successful
[    1.112202] sgm3784 1-0030: driver version: 00.01.00
[    1.112260] sgm3784 1-0030: get torch-gpio failed, using assist light mode
[    1.112298] sgm3784 1-0030: led0 max torch:299200UA flash:1122000UA timeout:1600000US
[    1.112316] sgm3784 1-0030: led1 max torch:299200UA flash:1122000UA timeout:1600000US
[    1.112486] sgm3784 1-0030: sgm3784_i2c_read: reg:0x0 failed
[    1.112503] sgm3784 1-0030: Read chip id error
[    1.113687] iommu: Adding device ff910000.rkisp1 to group 5
[    1.113716] rkisp1 ff910000.rkisp1: Linked as a consumer to ff914000.iommu
[    1.113928] rkisp1 ff910000.rkisp1: rkisp1 driver version: v00.01.05
[    1.113963] rkisp1 ff910000.rkisp1: Missing rockchip,grf property
[    1.114194] rkisp1 ff910000.rkisp1: Entity type for entity rkisp1-isp-subdev was not initialized!
[    1.114868] iommu: Adding device ff920000.rkisp1 to group 6
[    1.114897] rkisp1 ff920000.rkisp1: Linked as a consumer to ff924000.iommu
[    1.115083] rkisp1 ff920000.rkisp1: rkisp1 driver version: v00.01.05
[    1.115115] rkisp1 ff920000.rkisp1: Missing rockchip,grf property
[    1.115302] rkisp1 ff920000.rkisp1: Entity type for entity rkisp1-isp-subdev was not initialized!
[    1.116699] usbcore: registered new interface driver uvcvideo
[    1.116716] USB Video Class driver (1.1.1)
[    1.117023] rockchip-iodomain ff320000.syscon:io-domains: Linked as a consumer to regulator.22
[    1.117060] rockchip-iodomain ff320000.syscon:io-domains: pmu1830(3000000 uV) supplied by vcc_3v0
[    1.117308] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.22
[    1.117342] rockchip-iodomain ff770000.syscon:io-domains: bt656(3000000 uV) supplied by vcc_3v0
[    1.117414] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.21
[    1.117444] rockchip-iodomain ff770000.syscon:io-domains: audio(1800000 uV) supplied by vcca1v8_codec
[    1.117508] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.18
[    1.117537] rockchip-iodomain ff770000.syscon:io-domains: sdmmc(3000000 uV) supplied by vcc_sdio
[    1.117625] rockchip-iodomain ff770000.syscon:io-domains: gpio1830(3000000 uV) supplied by vcc_3v0
[    1.118471] __power_supply_register: Expected proper parent device for 'test_ac'
[    1.118607] __power_supply_register: Expected proper parent device for 'test_battery'
[    1.118807] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    1.118882] __power_supply_register: Expected proper parent device for 'test_usb'
[    1.120119] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[    1.121179] device-mapper: uevent: version 1.0.3
[    1.121365] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    1.121514] device-mapper: verity-avb: AVB error handler initialized with vbmeta device: 
[    1.121542] Bluetooth: HCI UART driver ver 2.3
[    1.121565] Bluetooth: HCI UART protocol H4 registered
[    1.121844] cpu cpu0: bin=1
[    1.121912] cpu cpu0: leakage=34
[    1.122004] cpu cpu0: Linked as a consumer to regulator.12
[    1.133231] cpu cpu0: temp=65000, pvtm=150613 (149029 + 1584)
[    1.133665] cpu cpu0: Dropping the link to regulator.12
[    1.133716] cpu cpu0: pvtm-volt-sel=2
[    1.133747] cpu cpu0: bin-scale=34
[    1.133857] cpu cpu4: bin=1
[    1.133895] cpu cpu4: leakage=54
[    1.134114] cpu cpu4: Linked as a consumer to regulator.25
[    1.137222] usb 2-1: new high-speed USB device number 2 using ehci-platform
[    1.147401] cpu cpu4: temp=64375, pvtm=158885 (158080 + 805)
[    1.148660] cpu cpu4: Dropping the link to regulator.25
[    1.148708] cpu cpu4: pvtm-volt-sel=2
[    1.148738] cpu cpu4: bin-scale=17
[    1.149078] cpu cpu0: Linked as a consumer to regulator.12
[    1.149128] cpu cpu0: Dropping the link to regulator.12
[    1.149260] cpu cpu0: Linked as a consumer to regulator.12
[    1.149867] cpu cpu0: avs=0
[    1.150107] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    1.150808] cpu cpu0: failed to find power_model node
[    1.151092] cpu cpu4: Linked as a consumer to regulator.25
[    1.151830] cpu cpu4: avs=0
[    1.151885] energy_model: pd4: hertz/watts ratio non-monotonically decreasing: em_cap_state 2 >= em_cap_state1
[    1.152137] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    1.154434] cpu cpu4: failed to find power_model node
[    1.155850] sdhci: Secure Digital Host Controller Interface driver
[    1.155879] sdhci: Copyright(c) Pierre Ossman
[    1.155925] Synopsys Designware Multimedia Card Interface Driver
[    1.156575] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    1.156790] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    1.156828] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    1.156897] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[    1.157061] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    1.157091] mmc_host mmc0: card is non-removable.
[    1.170301] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.183756] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    1.184045] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    1.184101] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    1.184164] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
[    1.184325] dwmmc_rockchip fe320000.dwmmc: Linked as a consumer to regulator.3
[    1.184432] dwmmc_rockchip fe320000.dwmmc: Linked as a consumer to regulator.18
[    1.184567] mmc_host mmc1: card is polling.
[    1.197678] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.210905] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.220462] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.222421] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.224314] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.227955] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.232717] mmc0: queuing unknown CIS tuple 0x81 (9 bytes)
[    1.235117] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    1.238907] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    1.240451] hidraw: raw HID events driver (C) Jiri Kosina
[    1.242529] usbcore: registered new interface driver usbhid
[    1.242556] usbhid: USB HID core driver
[    1.242629] ion_device_add_heap: ion_system_contig_heap id=0 type=1
[    1.242818] ion_device_add_heap: ion_system_heap id=1 type=0
[    1.242834] ion_device_add_heap: reserved id=2 type=4
[    1.243046] ashmem: initialized
[    1.245801] rockchip-saradc ff100000.saradc: Linked as a consumer to regulator.2
[    1.246748] optee: probing for conduit method from DT.
[    1.246798] optee: revision 1.1
[    1.247539] optee: initialized driver
[    1.247574] rknandbase v1.2 2021-01-07
[    1.248390] usbcore: registered new interface driver snd-usb-audio
[    1.249054] enter into es7210_modinit
[    1.250334] rt5651 1-001a: Device with ID register 0xffffffc0 is not rt5651
[    1.253930] netem: version 1.3
[    1.253968] u32 classifier
[    1.253973]     Actions configured
[    1.254488] xt_time: kernel timezone is -0000
[    1.254577] gre: GRE over IPv4 demultiplexor driver
[    1.254592] IPv4 over IPsec tunneling driver
[    1.255173] Initializing XFRM netlink socket
[    1.255196] IPsec XFRM device driver
[    1.255482] NET: Registered protocol family 10
[    1.256496] Segment Routing with IPv6
[    1.256569] mip6: Mobile IPv6
[    1.257079] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.257691] NET: Registered protocol family 17
[    1.257718] NET: Registered protocol family 15
[    1.257772] Bridge firewalling registered
[    1.258141] Bluetooth: RFCOMM TTY layer initialized
[    1.258158] Bluetooth: RFCOMM socket layer initialized
[    1.258187] Bluetooth: RFCOMM ver 1.11
[    1.258202] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.258211] Bluetooth: BNEP filters: protocol multicast
[    1.258222] Bluetooth: BNEP socket layer initialized
[    1.258231] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.258241] Bluetooth: HIDP socket layer initialized
[    1.258263] l2tp_core: L2TP core driver, V2.0
[    1.258276] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    1.258285] [BT_RFKILL]: Enter rfkill_rk_init
[    1.258293] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    1.258564] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    1.258603] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354
[    1.258613] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    1.258622] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    1.258654] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 3, flags = 0.
[    1.258667] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    1.258676] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    1.258685] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[    1.258694] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    1.259102] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[    1.259126] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[    1.259142] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
[    1.259158] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[    1.259211] [BT_RFKILL]: Request irq for bt wakeup host
[    1.259290] [BT_RFKILL]: ** disable irq
[    1.259393] [BT_RFKILL]: bt_default device registered.
[    1.259709] gyro_mpu6500 4-0068-1: sensor_register_device: mpu6500_gyro, id = 56
[    1.259722] i2c i2c-4: sensor_probe: mpu6500_gyro,000000006341dee5
[    1.259751] gyro_mpu6500 4-0068-1: sensor_chip_init:mpu6500_gyro:devid=0x0,ops=0x00000000e7f74868
[    1.260203] gyro_mpu6500 4-0068-1: sensor_active:fail to active sensor
[    1.260216] gyro_mpu6500 4-0068-1: sensor_init:line=84,error
[    1.260225] gyro_mpu6500 4-0068-1: sensor_initial:fail to init sensor
[    1.260235] gyro_mpu6500 4-0068-1: sensor_chip_init:fail to init sensor
[    1.260245] i2c i2c-4: sensor_probe failed -2
[    1.260245] 
[    1.260562] usb 5-1: new low-speed USB device number 2 using xhci-hcd
[    1.260575] ov13850 1-0010: driver version: 00.01.05
[    1.260754] ov13850 1-0010: Linked as a consumer to regulator.9
[    1.260792] ov13850 1-0010: 1-0010 supply dovdd not found, using dummy regulator
[    1.260840] ov13850 1-0010: Linked as a consumer to regulator.0
[    1.260860] ov13850 1-0010: 1-0010 supply dvdd not found, using dummy regulator
[    1.260952] ov13850 1-0010: could not get sleep pinstate
[    1.266637] ov13850 1-0010: Detected OV00d850 sensor, REVISION 0xb2
[    1.266697] rockchip-mipi-dphy-rx ff770000.syscon:mipi-dphy-rx0: match m00_b_ov13850 1-0010:bus type 4
[    1.266829] ov13850 1-0010-1: driver version: 00.01.05
[    1.266858] ov13850 1-0010-1: Failed to get power-gpios, maybe no use
[    1.266877] ov13850 1-0010-1: Failed to get reset-gpios, maybe no use
[    1.266965] ov13850 1-0010-1: Linked as a consumer to regulator.9
[    1.267002] ov13850 1-0010-1: 1-0010-1 supply dovdd not found, using dummy regulator
[    1.267055] ov13850 1-0010-1: Linked as a consumer to regulator.0
[    1.267075] ov13850 1-0010-1: 1-0010-1 supply dvdd not found, using dummy regulator
[    1.267146] ov13850 1-0010-1: could not get sleep pinstate
[    1.267207] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by 1-0010; cannot claim for 1-0010-1
[    1.267217] rockchip-pinctrl pinctrl: pin-75 (1-0010-1) status -22
[    1.267229] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout  on device rockchip-pinctrl
[    1.267240] ov13850 1-0010-1: Error applying setting, reverse things back
[    1.267250] ov13850 1-0010-1: could not set pins
[    1.269585] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[    1.270255] mmcblk2: mmc2:0001 TX2932 29.1 GiB 
[    1.270848] mmcblk2boot0: mmc2:0001 TX2932 partition 1 4.00 MiB
[    1.271386] mmcblk2boot1: mmc2:0001 TX2932 partition 2 4.00 MiB
[    1.271595] mmcblk2rpmb: mmc2:0001 TX2932 partition 3 4.00 MiB, chardev (237:0)
[    1.272101] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[    1.272741] ov13850 1-0010-1: Detected OV00d850 sensor, REVISION 0xb2
[    1.272812] rockchip-mipi-dphy-rx ff968000.mipi-dphy-tx1rx1: match m01_f_ov13850 1-0010-1:bus type 4
[    1.273184] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by 1-0010; cannot claim for 1-003c
[    1.273196] rockchip-pinctrl pinctrl: pin-75 (1-003c) status -22
[    1.273208] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout  on device rockchip-pinctrl
[    1.273219] gc2145 1-003c: Error applying setting, reverse things back
[    1.273250] gc2145: probe of 1-003c failed with error -22
[    1.273781]  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
[    1.274692] registered taskstats version 1
[    1.274704] Loading compiled-in X.509 certificates
[    1.274827] Key type ._fscrypt registered
[    1.274837] Key type .fscrypt registered
[    1.274846] Key type fscrypt-provisioning registered
[    1.275127] pstore: Using compression: deflate
[    1.276042] rga2: Driver loaded successfully ver:3.2.18218
[    1.276291] rga2: Module initialized.
[    1.284496] usb 2-1: New USB device found, idVendor=1a40, idProduct=0201, bcdDevice= 1.00
[    1.284515] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.284523] usb 2-1: Product: USB 2.0 Hub [MTT]
[    1.285060] hub 2-1:1.0: USB hub found
[    1.285242] hub 2-1:1.0: 7 ports detected
[    1.293274] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[    1.300111] rockchip-drm display-subsystem: defer getting devfreq
[    1.300281] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[    1.300398] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
[    1.300444] rockchip-vop ff900000.vop: missing rockchip,grf property
[    1.300607] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
[    1.300685] rockchip-dp ff970000.edp: no DP phy configured
[    1.301324] rockchip-drm display-subsystem: bound ff970000.edp (ops rockchip_dp_component_ops)
[    1.301477] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    1.302311] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[    1.303418] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)
[    1.303437] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.303446] [drm] No driver support for vblank timestamp query.
[    1.310670] mmc_host mmc1: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[    1.404960] usb 5-1: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00
[    1.404988] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.404996] usb 5-1: Product: Dell MS116 USB Optical Mouse
[    1.405003] usb 5-1: Manufacturer: PixArt
[    1.411820] vendor storage:20190527 ret = 0
[    1.423454] input: PixArt Dell MS116 USB Optical Mouse as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb5/5-1/5-1:1.0/0003:413C:301A.0001/input/input1
[    1.424047] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-xhci-hcd.1.auto-1/input0
[    1.491353] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 139
[    1.509740] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[    1.839243] rockchip-drm display-subsystem: fb0:  frame buffer device
[    1.840154] [drm] Initialized rockchip 2.0.0 20140818 for display-subsystem on minor 0
[    1.841080] midgard ff9a0000.gpu: Linked as a consumer to regulator.26
[    1.841141] midgard ff9a0000.gpu: leakage=39
[    1.853373] midgard ff9a0000.gpu: temp=63750, pvtm=126493 (126229 + 264)
[    1.854414] midgard ff9a0000.gpu: pvtm-volt-sel=2
[    1.854807] midgard ff9a0000.gpu: avs=0
[    1.855440] midgard ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[    1.855548] midgard ff9a0000.gpu: Protected mode not available
[    1.855987] midgard ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    1.856047] midgard ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[    1.856161] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 417; [Func] : midgard_kbase_devfreq_init(); success initing power_model_simple.
[    1.856866] midgard ff9a0000.gpu: Probed as mali0
[    1.857632] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[    1.857728] rk_gmac-dwmac fe300000.ethernet: Linked as a consumer to regulator.23
[    1.857741] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    1.857753] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    1.857763] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[    1.857776] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    1.857807] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    1.857816] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    1.862830] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    1.863236] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    1.863251] rk_gmac-dwmac fe300000.ethernet:     DWMAC1000
[    1.863262] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[    1.863272] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[    1.863281] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[    1.863290] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[    1.863299] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[    1.863330] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[    1.863340] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[    1.863350] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    1.945658] libphy: stmmac: probed
[    1.945714] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    1.945732] mdio_bus stmmac-0:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[    1.945749] mdio_bus stmmac-0:02: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:02, irq=POLL)
[    1.945765] mdio_bus stmmac-0:03: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:03, irq=POLL)
[    1.945782] mdio_bus stmmac-0:04: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:04, irq=POLL)
[    1.945799] mdio_bus stmmac-0:05: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:05, irq=POLL)
[    1.945815] mdio_bus stmmac-0:06: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:06, irq=POLL)
[    1.945839] mdio_bus stmmac-0:07: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:07, irq=POLL)
[    1.945862] mdio_bus stmmac-0:08: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:08, irq=POLL)
[    1.945885] mdio_bus stmmac-0:09: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:09, irq=POLL)
[    1.945908] mdio_bus stmmac-0:0a: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0a, irq=POLL)
[    1.945931] mdio_bus stmmac-0:0b: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0b, irq=POLL)
[    1.945954] mdio_bus stmmac-0:0c: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0c, irq=POLL)
[    1.945976] mdio_bus stmmac-0:0d: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0d, irq=POLL)
[    1.945999] mdio_bus stmmac-0:0e: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0e, irq=POLL)
[    1.946021] mdio_bus stmmac-0:0f: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:0f, irq=POLL)
[    1.946044] mdio_bus stmmac-0:10: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:10, irq=POLL)
[    1.946062] mdio_bus stmmac-0:11: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:11, irq=POLL)
[    1.946084] mdio_bus stmmac-0:12: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:12, irq=POLL)
[    1.946107] mdio_bus stmmac-0:13: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:13, irq=POLL)
[    1.946129] mdio_bus stmmac-0:14: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:14, irq=POLL)
[    1.946151] mdio_bus stmmac-0:15: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:15, irq=POLL)
[    1.946174] mdio_bus stmmac-0:16: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:16, irq=POLL)
[    1.946196] mdio_bus stmmac-0:17: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:17, irq=POLL)
[    1.946219] mdio_bus stmmac-0:18: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:18, irq=POLL)
[    1.946242] mdio_bus stmmac-0:19: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:19, irq=POLL)
[    1.946265] mdio_bus stmmac-0:1a: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1a, irq=POLL)
[    1.946287] mdio_bus stmmac-0:1b: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1b, irq=POLL)
[    1.946305] mdio_bus stmmac-0:1c: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1c, irq=POLL)
[    1.946327] mdio_bus stmmac-0:1d: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1d, irq=POLL)
[    1.946350] mdio_bus stmmac-0:1e: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1e, irq=POLL)
[    1.946372] mdio_bus stmmac-0:1f: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:1f, irq=POLL)
[    1.947988] input: adc-keys as /devices/platform/adc-keys/input/input2
[    1.949143] rockchip-dmc dmc: Linked as a consumer to regulator.11
[    1.949284] rockchip-dmc dmc: Failed to get ddr_leakage
[    1.949850] rockchip-dmc dmc: avs=0
[    1.950114] rockchip-dmc dmc: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[    1.950160] rockchip-dmc dmc: could not find power_model node
[    1.952231] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[    1.957112] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok
[    1.961731] It doesn't contain Rogue gpu
[    1.961982] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    1.963186] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    1.964189] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '22:07:40', on 'Jan  7 2024'.
[    1.964378] Mali: 
[    1.964379] Mali device driver loaded
[    1.964406] rkisp1 ff910000.rkisp1: clear unready subdev num: 1
[    1.964795] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    1.964812] cfg80211: failed to load regulatory.db
[    1.965231] rkisp1: Async subdev notifier completed
[    1.965248] rkisp1 ff920000.rkisp1: clear unready subdev num: 1
[    1.965978] rkisp1: Async subdev notifier completed
[    1.966074] ALSA device list:
[    1.966085]   #0: hdmi-sound
[    1.966090]   #1: ROCKCHIP,SPDIF
[    1.968384] Freeing unused kernel memory: 4160K
[    1.968471] Run /init as init process
[    1.977868] init: init first stage started!
[    1.977996] init: Unable to open /lib/modules, skipping module loading.
[    1.978259] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt
[    1.978875] init: Using Android DT directory /proc/device-tree/firmware/android/
[    2.008623] init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/by-name/metadata
[    2.008693] init: [libfs_mgr]Filesystem on /dev/block/by-name/metadata was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46
[    2.010313] init: [libfs_mgr]check_fs(): mount(/dev/block/by-name/metadata,/metadata,ext4)=-1: No such file or directory
[    2.010400] init: [libfs_mgr]Not running /system/bin/e2fsck on /dev/block/mmcblk2p11 (executable not in system image)
[    2.025212] EXT4-fs (mmcblk2p11): recovery complete
[    2.025680] EXT4-fs (mmcblk2p11): mounted filesystem with ordered data mode. Opts: discard
[    2.025759] init: [libfs_mgr]__mount(source=/dev/block/by-name/metadata,target=/metadata,type=ext4)=0: Success
[    2.025915] init: Failed to copy /avb into /metadata/gsi/dsu/avb/: No such file or directory
[    2.035403] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1
[    2.043976] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1
[    2.048523] EXT4-fs (dm-4): mounted filesystem without journal. Opts: barrier=1
[    2.053746] EXT4-fs (dm-3): mounted filesystem without journal. Opts: barrier=1
[    2.059235] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1
[    2.071714] init: 18 output lines suppressed due to ratelimiting
[    2.171915] init: Loading SELinux policy
[    2.195545] SELinux:  policy capability network_peer_controls=1
[    2.195580] SELinux:  policy capability open_perms=1
[    2.195587] SELinux:  policy capability extended_socket_class=1
[    2.195593] SELinux:  policy capability always_check_network=0
[    2.195600] SELinux:  policy capability cgroup_seclabel=0
[    2.195606] SELinux:  policy capability nnp_nosuid_transition=1
[    2.314496] audit: type=1403 audit(1704715727.706:2): auid=4294967295 ses=4294967295 lsm=selinux res=1
[    2.314626] selinux: SELinux: Loaded policy from /odm/etc/selinux/precompiled_sepolicy
[    2.314635] selinux: 
[    2.322401] selinux: SELinux: Loaded file_contexts
[    2.322426] selinux: 
[    2.344468] init: init second stage started!
[    2.398898] init: Using Android DT directory /proc/device-tree/firmware/android/
[    2.399708] init: Init cannot set 'ro.boot.verifiedbootstate' to 'orange': Read-only property was already set
[    2.405361] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory
[    2.406578] init: Setting product property ro.product.brand to 'rockchip' (from ro.product.product.brand)
[    2.406615] init: Setting product property ro.product.device to 'rk3399_Android11' (from ro.product.product.device)
[    2.406650] init: Setting product property ro.product.manufacturer to 'rockchip' (from ro.product.product.manufacturer)
[    2.406682] init: Setting product property ro.product.model to 'rk3399-Android11' (from ro.product.product.model)
[    2.406713] init: Setting product property ro.product.name to 'rk3399_Android11' (from ro.product.product.name)
[    2.406756] init: Setting property 'ro.build.fingerprint' to 'rockchip/rk3399_Android11/rk3399_Android11:11/RQ2A.210505.003/eng.rootro.20240108.181630:userdebug/release-keys'
[    2.449158] audit: type=1107 audit(1704715727.840:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc:  denied  { read } for property=persist.sys.adb_enable pid=0 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1'
[    2.450893] audit: type=1107 audit(1704715727.843:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc:  denied  { read } for property=init.svc.adbd pid=0 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=1'
[    2.563108] ueventd: ueventd started!
[    2.565619] selinux: SELinux: Loaded file_contexts
[    2.565693] selinux: 
[    2.565916] ueventd: Parsing file /system/etc/ueventd.rc...
[    2.566642] ueventd: Parsing file /vendor/ueventd.rc...
[    2.567863] ueventd: Parsing file /odm/ueventd.rc...
[    2.567927] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[    2.567954] ueventd: Parsing file /ueventd.rk30board.rc...
[    2.567982] ueventd: Unable to read config file '/ueventd.rk30board.rc': open() failed: No such file or directory
[    2.593745] apexd: This device does not support updatable APEX. Exiting
[    2.776652] midgard_kbase: disagrees about version of symbol module_layout
[    2.958386] ueventd: Coldboot took 0.389 seconds
[    3.070124] Registered swp emulation handler
[    3.120381] logd.auditd: start
[    3.120455] logd.klogd: 3116611046
console:/ $ [    3.126786] EXT4-fs (mmcblk2p10): Ignoring removed nomblk_io_submit option
[    3.130345] EXT4-fs (mmcblk2p10): recovery complete
[    3.130366] EXT4-fs (mmcblk2p10): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[    3.180337] e2fsck: e2fsck 1.45.4 (23-Sep-2019)
[    3.183174] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[    3.187560] e2fsck: Pass 2: Checking directory structure
[    3.188763] e2fsck: Pass 3: Checking directory connectivity
[    3.188961] e2fsck: Pass 4: Checking reference counts
[    3.196438] e2fsck: Pass 5: Checking group summary information
[    3.210918] e2fsck: /dev/block/by-name/cache: 17/98304 files (0.0% non-contiguous), 7202/98304 blocks
[    3.215782] EXT4-fs (mmcblk2p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    3.325860] wait_for_keymaster: Waiting for Keymaster device
[    3.358085] HidlServiceManagement: getService: Trying again for android.hardware.keymaster@4.0::IKeymasterDevice/default...
INF USER-TA:read_data_from_uboot_ta:661: (read_data_from_uboot_ta) filename(security_partition) !


ERR [0x0] TEE-CORE:ree_fs_open:1492: tee file not exists
ERR USER-TA:read_data_from_uboot_ta:689: TEE_InvokeTACommand returned 0xffff0000


INF USER-TA:TA_OpenSessionEntryPoint:341: Hello Rockchip Keymaster! rpmb :1


[    3.376038] wait_for_keymaster: List of Keymaster HALs found:
[    3.376279] wait_for_keymaster: Keymaster HAL #1: OpteeKeymasterDevice from Rockchip SecurityLevel: TRUSTED_ENVIRONMENT HAL: android.hardware.keymaster@4.1::IKeymasterDevice/default
[    3.376566] wait_for_keymaster: Using OpteeKeymasterDevice from Rockchip for encryption.  Security level: TRUSTED_ENVIRONMENT, HAL: android.hardware.keymaster@4.1::IKeymasterDevice/default
[    3.376581] wait_for_keymaster: Keymaster device ready
[    3.426107] type=1400 audit(1704715728.816:5): avc: denied { create } for comm="kdevtmpfs" name="dm-5" scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=blk_file permissive=1
[    3.426297] type=1400 audit(1704715728.816:6): avc: denied { setattr } for comm="kdevtmpfs" name="dm-5" dev="devtmpfs" ino=11442 scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=blk_file permissive=1
[    3.448552] fsck.f2fs: Info: Fix the reported corruption.
[    3.448887] fsck.f2fs:     Info: No support kernel version!
[    3.448907] fsck.f2fs: Info: Segments per section = 1
[    3.448922] fsck.f2fs: Info: Sections per zone = 1
[    3.448936] fsck.f2fs: Info: sector size = 4096
[    3.448951] fsck.f2fs: Info: total sectors = 6601211 (25785 MB)
[    3.449825] fsck.f2fs: Info: MKFS version
[    3.449841] fsck.f2fs:   "4.19.193 #1 SMP PREEMPT Sun Jan 7 22:06:45 CST 2024"
[    3.449852] fsck.f2fs: Info: FSCK version
[    3.449867] fsck.f2fs:   from "4.19.193 #1 SMP PREEMPT Sun Jan 7 22:06:45 CST 2024"
[    3.556569] F2FS-fs (dm-5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0
[    3.647141] F2FS-fs (dm-5): Mounted with checkpoint version = 7eecb5ed
[    3.749363] fscrypt: AES-256-CTS-CBC using implementation "cts(cbc-aes-ce)"
[    3.766327] fscrypt: AES-256-XTS using implementation "xts-aes-ce"
[    3.787885] apexd: This device does not support updatable APEX. Exiting
[    3.787928] apexd: Marking APEXd as activated
[    3.929767] type=1400 audit(1704715729.320:7): avc: denied { read } for comm="android.hardwar" name="resolution_white.xml" dev="dm-0" ino=3901 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
[    3.930005] type=1400 audit(1704715729.320:8): avc: denied { open } for comm="android.hardwar" path="/system/usr/share/resolution_white.xml" dev="dm-0" ino=3901 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
[    3.930161] type=1400 audit(1704715729.320:9): avc: denied { getattr } for comm="android.hardwar" path="/system/usr/share/resolution_white.xml" dev="dm-0" ino=3901 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
[    3.969982] apexd: This device does not support updatable APEX. Exiting
[    3.970031] apexd: Marking APEXd as ready
[    4.024480] logd.daemon: reinit
[    4.067029] init: Verified that /data/nfc has the encryption policy 7a5fc0e58cc2ce73cd89ab7345f39323 v2 modes 1/4 flags 0xa
[    4.067205] type=1400 audit(1704715729.456:10): avc: denied { setattr } for comm="init" name="nfc" dev="dm-5" ino=100 scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
[    4.067516] init: Inferred action different from explicit one, expected 0 but got 2
[    4.067536] type=1400 audit(1704715729.456:11): avc: denied { read } for comm="init" name="nfc" dev="dm-5" ino=100 scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
[    4.067915] init: Verified that /data/nfc/param has the encryption policy 7a5fc0e58cc2ce73cd89ab7345f39323 v2 modes 1/4 flags 0xa
INF USER-TA:TA_OpenSessionEntryPoint:96: Hello Rockchip Weaver! rpmb :1


INF [0x0] TEE-CORE:tee_rpmb_init:1217: RPMB INIT: Verify key failed. Try again.

ERR [0x0] TEE-CORE:tee_rpmb_init:1225: ERROR: Verify RPMB authentication key failed!

INF USER-TA:read_securedata:322: TEE_ITEM_NOT_FOUND return !


INF [0x0] TEE-CORE:tee_rpmb_init:1217: RPMB INIT: Verify key failed. Try again.

ERR [0x0] TEE-CORE:tee_rpmb_init:1225: ERROR: Verify RPMB authentication key failed!

[    4.417186] Unable to handle kernel access to user memory outside uaccess routines at virtual address 000000000000005c
[    4.420256] healthd: BatteryCurrentNowPath not found
[    4.420594] Mem abort info:
[    4.420748] healthd: BatteryCycleCountPath not found
[    4.421005]   ESR = 0x96000005
[    4.421716]   Exception class = DABT (current EL), IL = 32 bits
[    4.422246]   SET = 0, FnV = 0
[    4.422523]   EA = 0, S1PTW = 0
[    4.422800] Data abort info:
[    4.423055]   ISV = 0, ISS = 0x00000005
[    4.423400]   CM = 0, WnR = 0
[    4.423708] user pgtable: 4k pages, 39-bit VAs, pgdp = 000000002230a5eb
[    4.424339] [000000000000005c] pgd=0000000000000000, pud=0000000000000000
[    4.424945] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[    4.425442] Modules linked in:
[    4.425724] Process android.hardwar (pid: 273, stack limit = 0x0000000065e61e80)
[    4.426377] CPU: 1 PID: 273 Comm: android.hardwar Not tainted 4.19.193 #1
[    4.426540] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[    4.426971] Hardware name: Rockchip RK3399 Excavator Board edp avb (Android) (DT)

[    4.426977] pstate: 60400005 (nZCv daif +PAN -UAO)
[    4.428620] pc : optee_handle_rpc+0x3cc/0x578
[    4.429013] lr : optee_handle_rpc+0x78/0x578
[    4.429391] sp : ffffff800eba3aa0
[    4.429690] x29: ffffff800eba3aa0 x28: ffffffc06ecf3a00 
[    4.430162] x27: 0000000000000000 x26: 0000000000000000 
[    4.430633] x25: ffffffc075336f00 x24: ffffffc07b2c8800 
[    4.431105] x23: 0000000000000001 x22: ffffff800ac000e0 
[    4.431576] x21: ffffffc075336880 x20: ffffff800eba3b88 
[    4.432047] x19: ffffff8009ccd000 x18: ffffff80096c5530 
[    4.432518] x17: 0000000000000000 x16: 0000000000000000 
[    4.432989] x15: ffffff8009ccdba8 x14: 0000000000000001 
[    4.433473] x13: 0000000000000001 x12: 000000000000029a 
[    4.433954] x11: 071c71c71c71c71c x10: 0000000000000a90 
[    4.434427] x9 : ffffff800eba3830 x8 : ffffff800eba3ba8 
[    4.434899] x7 : 0000000000000000 x6 : 0000000000000000 
[    4.435370] x5 : 0000000000000000 x4 : 0000000000000000 
[    4.435840] x3 : 0000000000000060 x2 : ffffffc075336f00 
[    4.436311] x1 : 0000000000000000 x0 : 0000000000000000 
[    4.436783] 
[    4.436783] PC: 0xffffff8008bd59fc:
[    4.437219] 59fc  97d9ac61 17ffff66 d503201f f94012d7 f10006ff 54fff321 a94286c0 b40002c0
[    4.437955] 5a1c  f100041f 54ffeba1 aa0103e0 97fff714 b90016df 17ffff5a b94002c1 aa1703e3
[    4.438685] 5a3c  b9401ec2 aa1503e0 940000f1 b90016c0 b9401ec1 aa1703e2 aa1803e0 97fffa48
[    4.439409] 5a5c  34fffce0 17ffffe4 129ffe60 b90016c0 17ffff4b d2800060 a905ffa0 aa0103e0
[    4.440132] 5a7c  b9805c21 a906ffa1 97fff709 910163a3 aa1703e2 528000e1 aa1503e0 940000dc
[    4.440855] 5a9c  b90016df 17ffff3e b94032c1 91012318 aa1803e0 97fffe9e aa0003f5 b4ffe6e0
[    4.441577] 5abc  91004000 940e9302 aa1803e0 940e94ee aa1503e0 97e3f4f0 72001c1f 54000080
[    4.442301] 5adc  a94002a1 f9000420 f9000001 d2802001 d2804000 f2fbd5a1 f2fbd5a0 a90002a1
[    4.443025] 
[    4.443025] LR: 0xffffff8008bd56a8:
[    4.443460] 56a8  a8c27bfd d65f03c0 a9b87bfd 910003fd a9025bf5 aa0003f5 a90153f3 900087d3
[    4.444185] 56c8  a90363f7 912b2260 f90023f9 aa0103f4 aa0203f7 f9400001 f9003fa1 d2800001
[    4.444910] 56e8  f94002a0 97ffec41 79400281 7100083f 540009c0 540006a9 7100103f 540004a0
[    4.445634] 5708  7100143f 540008a1 29408a99 aa0003f8 d2800001 aa198059 aa1903e0 97fff8e7
[    4.446358] 5728  aa0003f6 b140041f 54001208 b9400000 7100141f 540012a0 54000888 71000c1f
[    4.447082] 5748  540009c0 7100101f 54001341 b9401ec0 7100041f 540008c1 394082c0 f100041f
[    4.447807] 5768  54000861 f94016c0 b40019a0 f100041f 540007e1 b94032c1 91012300 97ffff69
[    4.448542] 5788  b4000060 91004000 97d4d8ba b90016df 52800060 912b2273 72a64000 b9000280
[    4.449272] 
[    4.449272] SP: 0xffffff800eba3a20:
[    4.449708] 3a20  7b2c8800 ffffffc0 75336f00 ffffffc0 00000000 00000000 00000000 00000000
[    4.450431] 3a40  6ecf3a00 ffffffc0 0eba3aa0 ffffff80 08bd5728 ffffff80 0eba3aa0 ffffff80
[    4.451154] 3a60  08bd5a7c ffffff80 60400005 00000000 7b2c8818 ffffffc0 75336880 ffffffc0
[    4.451878] 3a80  ffffffff 0000007f 56000000 00000000 0eba3aa0 ffffff80 08bd5a7c ffffff80
[    4.452601] 3aa0  0eba3b30 ffffff80 08bd4968 ffffff80 09ccd000 ffffff80 7b2c8800 ffffffc0
[    4.453323] 3ac0  0eba3ba8 ffffff80 7b2c8818 ffffffc0 75336880 ffffffc0 ffff0005 00000000
[    4.454046] 3ae0  56000000 00000000 08bd4534 ffffff80 0eba3b10 ffffff80 00000003 00000000
[    4.454769] 3b00  00000000 00000000 00000000 00000000 0eba3b30 ffffff80 5a82dd00 e76a065e
[    4.455493] 
[    4.455493] X2: 0xffffffc075336e80:
[    4.455929] 6e80  00000000 00000000 0ec80000 ffffff80 00005000 00000000 00000002 00000000
[    4.456652] 6ea0  75336b00 ffffffc0 00000004 00000000 00000000 00000000 080b7bb0 ffffff80
[    4.457386] 6ec0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.458116] 6ee0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.458848] 6f00  7b2d5800 ffffffc0 75336880 ffffffc0 753e0b10 ffffffc0 75336888 ffffffc0
[    4.459577] 6f20  09e080e0 00000000 0ac000e0 ffffff80 00000060 00000000 00000000 00000000
[    4.460300] 6f40  00000000 00000000 00000000 00000000 00000000 00000000 00000021 00000002
[    4.461022] 6f60  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.461747] 
[    4.461747] X8: 0xffffff800eba3b28:
[    4.462183] 3b28  000000a0 00000000 0eba3c00 ffffff80 08bd4dfc ffffff80 00000000 00000000
[    4.462906] 3b48  09ccd000 ffffff80 75336880 ffffffc0 753e0c00 ffffffc0 0eba3cb0 ffffff80
[    4.463629] 3b68  753e0a80 ffffffc0 6da01020 ffffffc0 00000000 00000000 00000000 00000000
[    4.464353] 3b88  ffff0005 ffffffc0 75336f00 00000000 00000000 00000000 00000000 00000000
[    4.465076] 3ba8  ffff0005 00000000 ffffffc0 00000000 75336f00 00000000 00000000 00000000
[    4.465799] 3bc8  7b2c8838 ffffffc0 7b2c8838 ffffffc0 00000000 ffffffc0 00000000 ffffff80
[    4.466522] 3be8  0eba3be8 ffffff80 0eba3be8 ffffff80 5a82dd00 e76a065e 0eba3c60 ffffff80
[    4.467245] 3c08  08bd1678 ffffff80 dd05d6f0 0000007f 75336880 ffffffc0 09ccd000 ffffff80
[    4.467969] 
[    4.467969] X9: 0xffffff800eba37b0:
[    4.468404] 37b0  0000005c 00000000 00000025 00000000 75336f00 ffffffc0 00000000 00000000
[    4.469127] 37d0  00000000 00000000 6ecf3a00 ffffffc0 00000000 00000000 099c1000 ffffff80
[    4.469849] 37f0  0eba3810 ffffff80 08086b3c ffffff80 7e101d00 ffffffc0 6ecf3a00 ffffffc0
[    4.470572] 3810  0eba3850 ffffff80 08f791f8 ffffff80 00000000 00000000 7ef59240 ffffffc0
[    4.471295] 3830  7e101d00 ffffffc0 099c1000 ffffff80 797cd500 ffffffc0 09ccd000 ffffff80
[    4.472018] 3850  0eba38e0 ffffff80 08f79868 ffffff80 6ecf3a00 ffffffc0 75167f38 ffffffc0
[    4.472741] 3870  09ccd000 ffffff80 5a82dd00 e76a065e 0eba3890 ffffff80 08080d5c ffffff80
[    4.473465] 3890  0eba3a90 ffffff80 08082bc4 ffffff80 09ccd000 ffffff80 ffffffff 0000007f
[    4.474191] 
[    4.474191] X15: 0xffffff8009ccdb28:
[    4.474638] db28  00000000 00000000 0a2d2600 ffffffc0 0a2d2800 ffffffc0 0a2d2a00 ffffffc0
[    4.475362] db48  0a2d2c00 ffffffc0 0a2d2e00 ffffffc0 0a2d3000 ffffffc0 0a2d3200 ffffffc0
[    4.476087] db68  0a2e2000 ffffffc0 00000001 00000001 017ed73b 00000020 00000000 00000000
[    4.476812] db88  00000000 00000000 0007a120 00000000 000000b4 00000000 00000000 00000000
[    4.477537] dba8  77686f88 00000000 00000000 00000000 00004e20 00000000 00000000 00000000
[    4.478261] dbc8  00000000 00000001 00000000 00000000 00000000 00000000 00000000 00000000
[    4.478986] dbe8  00000000 00000000 0002bf20 00000015 00000001 00000001 00000001 00000000
[    4.479709] dc08  00000002 00000000 00000001 00000001 00000000 00000000 00000000 00000005
[    4.480433] 
[    4.480433] X18: 0xffffff80096c54b0:
[    4.480880] 54b0  73657270 65727573 006f692f 00000000 73657270 65727573 6d656d2f 0079726f
[    4.481605] 54d0  73657270 65727573 7570632f 00000000 73703301 69203a69 6e6f636e 74736973
[    4.482330] 54f0  20746e65 6b736174 61747320 20216574 6b736174 3a64253d 63207325 253d7570
[    4.483057] 5510  73702064 6c665f69 3d736761 63207825 7261656c 2078253d 3d746573 000a7825
[    4.483781] 5530  73703301 74203a69 206b7361 65646e75 6f6c6672 63202177 253d7570 3d742064
[    4.484507] 5550  74206425 736b7361 75255b3d 20752520 205d7525 61656c63 78253d72 74657320
[    4.485233] 5570  0a78253d 00000000 3a697370 69727420 72656767 61656c20 00000a6b 00000000
[    4.485959] 5590  656d6f73 00000000 61207325 30316776 756c253d 3230252e 6120756c 30366776
[    4.486689] 
[    4.486689] X19: 0xffffff8009cccf80:
[    4.487152] cf80  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.487888] cfa0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.488613] cfc0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.489339] cfe0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.490078] d000  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.490810] d020  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.491536] d040  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.492275] d060  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.493010] 
[    4.493010] X20: 0xffffff800eba3b08:
[    4.493468] 3b08  00000000 00000000 0eba3b30 ffffff80 5a82dd00 e76a065e 0eba3ba8 ffffff80
[    4.494223] 3b28  000000a0 00000000 0eba3c00 ffffff80 08bd4dfc ffffff80 00000000 00000000
[    4.494969] 3b48  09ccd000 ffffff80 75336880 ffffffc0 753e0c00 ffffffc0 0eba3cb0 ffffff80
[    4.495701] 3b68  753e0a80 ffffffc0 6da01020 ffffffc0 00000000 00000000 00000000 00000000
[    4.496428] 3b88  ffff0005 ffffffc0 75336f00 00000000 00000000 00000000 00000000 00000000
[    4.497154] 3ba8  ffff0005 00000000 ffffffc0 00000000 75336f00 00000000 00000000 00000000
[    4.497881] 3bc8  7b2c8838 ffffffc0 7b2c8838 ffffffc0 00000000 ffffffc0 00000000 ffffff80
[    4.498608] 3be8  0eba3be8 ffffff80 0eba3be8 ffffff80 5a82dd00 e76a065e 0eba3c60 ffffff80
[    4.499336] 
[    4.499336] X21: 0xffffffc075336800:
[    4.499783] 6800  0ed08000 ffffff80 0ed0d000 ffffff80 00000004 00000000 6eddf899 ffffffc0
[    4.500507] 6820  00000000 00000000 00000000 00000000 76815d30 ffffffc0 6eddf8b0 ffffffc0
[    4.501232] 6840  75336900 ffffffc0 75336980 ffffffc0 000000e8 0000000a 75336a00 ffffffc0
[    4.501956] 6860  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.502679] 6880  7b2d5800 ffffffc0 75336f10 ffffffc0 753e0a90 ffffffc0 75336a80 ffffffc0
[    4.503405] 68a0  00000005 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.504133] 68c0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.504859] 68e0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.505586] 
[    4.505586] X22: 0xffffff800ac00060:
[    4.506047] 0060  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.506797] 0080  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.507543] 00a0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.508275] 00c0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.509001] 00e0  00000007 00000000 00000000 00000000 00000000 ffff0000 00000002 00000001
[    4.509724] 0100  00000001 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.510449] 0120  0000000a 00000000 09e0c000 00000000 00000200 00000000 6ef95280 ffffffc0
[    4.511174] 0140  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.511902] 
[    4.511902] X24: 0xffffffc07b2c8780:
[    4.512350] 8780  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.513075] 87a0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.513811] 87c0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.514545] 87e0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.515270] 8800  7b2d6000 ffffffc0 7b2d5800 ffffffc0 08bd40f0 ffffff80 00000000 00000000
[    4.515998] 8820  00000000 00000000 7b2c8828 ffffffc0 7b2c8828 ffffffc0 0eba3bc8 ffffff80
[    4.516726] 8840  0eba3bc8 ffffff80 00000000 00000000 00000000 00000000 7b2c8858 ffffffc0
[    4.517455] 8860  7b2c8858 ffffffc0 7b2c8868 ffffffc0 7b2c8868 ffffffc0 00000000 00000000
[    4.518185] 
[    4.518185] X25: 0xffffffc075336e80:
[    4.518634] 6e80  00000000 00000000 0ec80000 ffffff80 00005000 00000000 00000002 00000000
[    4.519363] 6ea0  75336b00 ffffffc0 00000004 00000000 00000000 00000000 080b7bb0 ffffff80
[    4.520090] 6ec0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.520817] 6ee0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.521545] 6f00  7b2d5800 ffffffc0 75336880 ffffffc0 753e0b10 ffffffc0 75336888 ffffffc0
[    4.522284] 6f20  09e080e0 00000000 0ac000e0 ffffff80 00000060 00000000 00000000 00000000
[    4.523017] 6f40  00000000 00000000 00000000 00000000 00000000 00000000 00000021 00000002
[    4.523743] 6f60  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.524474] 
[    4.524474] X28: 0xffffffc06ecf3980:
[    4.524935] 3980  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.525668] 39a0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.526393] 39c0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.527117] 39e0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.527855] 3a00  04000028 00000000 ffffffff ffffffff 6ec5b000 011a0000 00000001 00000000
[    4.528602] 3a20  00000000 00000000 0eba0000 ffffff80 00000004 00404100 00000000 00000000
[    4.529344] 3a40  00000000 00000000 00000001 00000001 0000006b 00000000 fffea531 00000000
[    4.530096] 3a60  76a70e80 ffffffc0 00000001 00000001 00000001 00000078 00000078 00000078
[    4.530833] 
[    4.530833] X29: 0xffffff800eba3a20:
[    4.531282] 3a20  7b2c8800 ffffffc0 75336f00 ffffffc0 00000000 00000000 00000000 00000000
[    4.532007] 3a40  6ecf3a00 ffffffc0 0eba3aa0 ffffff80 08bd5728 ffffff80 0eba3aa0 ffffff80
[    4.532733] 3a60  08bd5a7c ffffff80 60400005 00000000 7b2c8818 ffffffc0 75336880 ffffffc0
[    4.533471] 3a80  ffffffff 0000007f 56000000 00000000 0eba3aa0 ffffff80 08bd5a7c ffffff80
[    4.534204] 3aa0  0eba3b30 ffffff80 08bd4968 ffffff80 09ccd000 ffffff80 7b2c8800 ffffffc0
[    4.534930] 3ac0  0eba3ba8 ffffff80 7b2c8818 ffffffc0 75336880 ffffffc0 ffff0005 00000000
[    4.535657] 3ae0  56000000 00000000 08bd4534 ffffff80 0eba3b10 ffffff80 00000003 00000000
[    4.536381] 3b00  00000000 00000000 00000000 00000000 0eba3b30 ffffff80 5a82dd00 e76a065e
[    4.537106] 
[    4.537248] Call trace:
[    4.537479]  optee_handle_rpc+0x3cc/0x578
[    4.537838]  optee_do_call_with_arg+0x120/0x140
[    4.538240]  optee_invoke_func+0x13c/0x1a8
[    4.538610]  tee_ioctl_invoke+0x230/0x4d0
[    4.538968]  tee_ioctl+0x9c4/0xef8
[    4.539271]  do_vfs_ioctl+0xbc/0xda8
[    4.539594]  ksys_ioctl+0x84/0x98
[    4.539908]  __arm64_sys_ioctl+0x18/0x28
[    4.540260]  el0_svc_common.constprop.0+0x64/0x178
[    4.540686]  el0_svc_handler+0x28/0x78
[    4.541030]  el0_svc+0x8/0xc
[    4.541295] Code: 17ffff4b d2800060 a905ffa0 aa0103e0 (b9805c21) 
[    4.541839] ---[ end trace e5d69e93a6606583 ]---
[    4.556514] Kernel panic - not syncing: Fatal exception
[    4.556980] SMP: stopping secondary CPUs
[    4.557371] CRU:
[    4.557542] 00000000: 0000003b 00001101 80000000 00000108 00000007 00007f00 00000000 00000000
[    4.558296] 00000020: 00000032 00001101 80000000 00000108 00000007 00007f00 00000000 00000000
[    4.559050] 00000040: 0000006b 00001301 8000031f 00000108 00000007 00007f00 00000000 00000000
[    4.559804] 00000060: 00000064 00001403 8000031f 00000108 00000007 00007f00 00000000 00000000
[    4.560558] 00000080: 00000064 00001301 8000031f 00000108 00000007 00007f00 00000000 00000000
[    4.561312] 000000a0: 0000004b 00001301 8000031f 00000108 00000007 00007f00 00000000 00000000
[    4.562065] 000000c0: 00000129 00001608 8000031f 00000108 00000007 00007f00 00000000 00000000
[    4.562819] 000000e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.563573] 00000100: 00000100 00000606 00000140 00006505 00000083 00008580 00008320 00000141
[    4.564327] 00000120: 00000181 00008181 00000141 00000141 00004141 00008343 00003185 00000103
[    4.565081] 00000140: 00000477 00000300 00004a87 0000033f 00009381 00008387 00001103 00005282
[    4.565835] 00000160: 00008247 00000187 00001784 0000001f 00000380 00000300 00000380 00000000
[    4.566589] 00000180: 00006380 00001200 00000200 00000200 00000200 00000200 00003f3f 00000081
[    4.567343] 000001a0: 00000000 00000000 00004141 00000421 00008700 000002dc 00000004 00000381
[    4.568097] 000001c0: 00000381 00000100 00000000 00000087 00000087 00000141 00000141 00008181
[    4.568851] 000001e0: 00008323 00000007 00008f1f 00008f8f 00008f8f 00008783 00008787 00008787
[    4.569605] 00000200: 000000c5 000000cf 00000000 00000000 00000000 00000000 00000000 00000000
[    4.570359] 00000220: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.571113] 00000240: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.571866] 00000260: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.572620] 00000280: 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60
[    4.573374] 000002a0: 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 00000000 00000000 00000000 00000000
[    4.574128] 000002c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.574882] 000002e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.575635] 00000300: 00000080 00000080 00000202 0000006f 00000c30 000001c0 0000001d 000001c0
[    4.576390] 00000320: 0000fff8 0000f0ff 0000c0ff 0000c130 00000040 0000e233 00000000 00000000
[    4.577143] 00000340: 00000505 00000505 00001000 00000000 00000e04 0000000f 0000cfeb 00003f00
[    4.577897] 00000360: 0000ef60 00000020 00000ffe 000001f0 00000000 00000f86 00000d08 00000180
[    4.578651] 00000380: 00000010 00000000 0000003a 00000000 00000000 00000000 00000000 00000000
[    4.579405] 000003a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.580158] 000003c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.580912] 000003e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.581665] 00000400: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.582419] 00000420: 00000080 00004070 00000000 00000014 00000000 00000000 00000000 00000000
[    4.583172] 00000440: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.583925] 00000460: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.584679] 00000480: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.585433] 000004a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.586187] 000004c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.586941] 000004e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.587695] 00000500: 00000000 00000000 00640064 00000000 00000003 00000003 00000000 00000000
[    4.588448] 00000520: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.589202] 00000540: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.589956] 00000560: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.590707] 00000580: 00000002 00000000 00000004 000008ba 00000004
[    4.591254] PMU CRU:
[    4.591458] 00000000: 000000a9 00001203 80000000 00000108 00000007 00007f00 00000000 00000000
[    4.592213] 00000020: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.592969] 00000040: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.593724] 00000060: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.594480] 00000080: 0000060d 00001986 00000303 00000003 000002dc 00000200 0bb8ea60 00010014
[    4.595235] 000000a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.595990] 000000c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.596746] 000000e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.597501] 00000100: 00000ffc 0000fb80 0000000f 00000000 00000024 00000000 00000000 00000000
[    4.598254] 00000120: 00000000 00000000 00000000 00000000 00000003
[    4.598802] PMU:
[    4.598983] 00000000: 00000000 00000000 00000000 00000000 00000000 80cf8100 80cf8100 00000000
[    4.599738] 00000020: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.600494] 00000040: 00000000 00000000 00000000 00000000 00000000 82cf833f 00000000 00000000
[    4.601249] 00000060: 20000679 20000679 20000679 00000010 00000000 00007e00 00000000 28800000
[    4.602005] 00000080: 000003c0 00011940 00005dc0 000003c0 00005dc0 00000060 0000000f 00000018
[    4.602761] 000000a0: 00000018 00000018 00000018 00000006 00000006 00005dc0 00005dc0 00005dc0
[    4.603516] 000000c0: 00000000 00000000 00000000 00000000 00000000 00000000 3fffffff 00000000
[    4.604272] 000000e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.605021] Kernel Offset: disabled
[    4.605334] CPU features: 0x00000000,2000600c
[    4.605722] Memory Limit: none
[    4.606012] rockchip-thermal ff260000.tsadc: channal 0: temperature(67 C)
[    4.606606] rockchip-thermal ff260000.tsadc: channal 1: temperature(63 C)
[    4.607198] THERMAL REGS:
[    4.607435] 00000000: 00000200 00030133 00000031 00000002 00000000 00000000 00000000 00000000
[    4.608190] 00000020: 00000248 00000244 00000000 00000000 0000024e 00000000 00000000 00000000
[    4.608944] 00000040: 000002a5 000002a5 00000000 00000000 00000000 00000000 00000000 00000000
[    4.609699] 00000060: 00000004 00000004 00000753 00000753 00000000 00000000 00000000 00000000
[    4.610449] 00000080: 00000000 00000000

[    4.626010] Rebooting in 5 seconds..
DDR Version 1.25 20210517


【相关的资料:】
百度搜索:ifeq ($(strip $(BOARD_HAS_EC20_MODEM)),true)

RK3399 EC20 步骤
Android6.0 RK3399 PCIe 接口 4G模块 EC20 调试记录
rk3568 Android11系统调试ec20模块的gps功能
RK3568-ANDROID11-4G-EC20-(详细步骤)
RK356X android11 移远EC20 modem支持

[ 87.794373] init: Sending signal 9 to service 'ril-daemon' (pid 2176) proce
重复打印'android.hardware.radio@1.1::IRadio/slot1'
+ if(strcmp(descriptor.c_str(),"android.hardware.radio@1.1::IRadio") != 0)
[ 44.972959] init: Control message: Processed ctl.interface_start for 'andro

'android.hardware.radio@1.1::IRadio/slot1' from pid: 154 (/system/bin/hwserv
init: Control message: Processed ctl.interface_start for 'android.hardware.r
type=1400 audit(1704645252.746:494): avc: denied { read write } for comm="ri


BING:[   44.972959] init: Control message: Processed ctl.interface_start for 'android.hardware.radio@1.1::IRadio/slot1' from pid: 149 (/system/bin/hwservicemanager)


https://blog.csdn.net/longmin96/article/details/122716504
RK3568-ANDROID11-4G-EC20-(详细步骤)
注意:硬件可以先使用USB转接板把模块接到电脑上,使用AT指令把模块调好。


https://blog.csdn.net/longmin96/article/details/122687117
RK3568-ANDROID11-4G-EC20-驱动篇(移远模块)
旋风旋风

https://blog.csdn.net/longmin96/article/details/122687865
RK3568-ANDROID11-4G-EC20-系统篇(移远模块)
首先,要先获得技术支持
步骤一,先在USB模块上完成4G
步骤二,移植到PCIE座子上


https://blog.csdn.net/weixin_51178981/article/details/124804679
NXP(imx8qxp)上android11的EG25-G(4G)模块调试记录

修改selinux的权限
修改/system/core/init/selinux.cpp
diff --git a/init/selinux.cpp b/init/selinux.cpp
index 5a0255acd..ae6f1fce9 100644
--- a/init/selinux.cpp
+++ b/init/selinux.cpp
@@ -104,6 +104,7 @@ EnforcingStatus StatusFromCmdline() {
 }
 
 bool IsEnforcing() {
+    return false;
     if (ALLOW_PERMISSIVE_SELINUX) {
         return StatusFromCmdline() == SELINUX_ENFORCING;
     }


https://blog.csdn.net/terry_xiwang/article/details/123137864
RK3568 Android12 移远4G模块EM05-CE 调试心得

4、适配Android部分的时候主要是利用了rk已有的4g modem框架,打开BOARD_HAS_RK_4G_MODEM属性,并将librk-ril.so 替换为Quectel的ril库,这样会少走一些弯路。
5、我用的ril库版本为Quectel_Android_RIL_Driver_V3.3.78,这个版本才能适配Android12。之前用过3.3.57和3.3.62版本的库,加载时都会报错:


【关闭多余的打印LOG】
https://bbs.elecfans.com/jishu_2263076_1_1.html
[问答] 如何调试RK3568-ANDROID11-4G-EC20?


【下载】
https://download.csdn.net/download/seasonfangjing/86247556?utm_source=bbsseo
RK356X android11 移远EC20 modem支持


https://blog.csdn.net/weixin_38420901/article/details/129875533
移远EC20 WINDOWS下安装驱动及开机自动拨号上网
https://download.csdn.net/download/weixin_38420901/87635376
移远EC20 Windows驱动
https://download.csdn.net/download/guoruibin123/19886298
移远EC20 R2.0 全网通4G模块软硬件设计技术资料包(包括模块封装+软硬件设计文档+软件驱动).zip 
https://download.csdn.net/download/xieyunfei1999/88332693
移远USB驱动V2.2.2 Quectel-LTE&5G-Windows-USB-Driver-V2.2.2 EC20最新驱动


https://blog.csdn.net/yjz_0314/article/details/134142847
Android11.0系统中适配EC20模块4G及GPS功能
https://download.csdn.net/download/yjz_0314/88490693?spm=1001.2101.3001.9500
Android11.0系统中适配EC20模块4G及GPS功能


https://download.csdn.net/download/seasonfangjing/88073682
RK3588S android13 ec20 modem移植


https://blog.csdn.net/xierong1/article/details/127091908
rk3399调试EC20 4G模块

还有 android 8.1 与5.1区别很大就是 系统权限
Selinux
./device/rockchip/common/sepolicy/rild.te
./system/sepolicy/vendor/rild.te
./system/sepolicy/public/rild.te
./system/sepolicy/prebuilts/api/26.0/public/rild.te


https://www.cnblogs.com/lialong1st/p/11266330.html
https://blog.csdn.net/weixin_30273931/article/details/101681600
RK3399 4G模块移远EC20移植调试


https://download.csdn.net/download/weixin_44498318/18300885
RK3399 安卓Q适配EC20 4G模块资料


https://blog.csdn.net/linux_qian/article/details/90715599/
rk3399添加EC25E/EC20...模组

搞来搞去搞了很久,差点放弃走人的时候,发现竟然是这点事。。。辛酸史如下:
android6.01-----kernel4.4.36-----编译环境ubuntu16.04
一、kernel driver
内核有4种驱动方式,usb serial、CDC ACM、Gobinet、QMI WWAN,本文选用的是usb serial和QMI WWAN两种驱动。

(4)打开dongle功能
/device/rockchip/common/BoardConfig.mk
BOARD_HAVE_DONGLE ?= true

(5)检查
logcat -b radio -v time    //查看log
getprop init.svc.ril-daemon    //检查ril守护进程Runing
cat init.rc | grep ril-daemon    //检查ril-daemon服务是否生效
getenforce         //检查SELinux是否开启,<setenforce 0>命令关闭
getprop gsm.version.ril-impl  //检查ril版本,出现Quectel_Android_RIL_SR01A41V17,如未出现ril库没有添加上,或者检查phone进程


https://blog.csdn.net/weixin_43069863/article/details/126587254
rk3568 4g 模块调试-ec20(移远模块)

如果无法上网,也可以尝试修改上网状态的选择模式

--- a/frameworks/base/telephony/java/com/android/internal/telephony/RILConstants.java
+++ b/frameworks/base/telephony/java/com/android/internal/telephony/RILConstants.java
@@ -237,7 +237,7 @@ public interface RILConstants {
     int PREFERRED_NETWORK_MODE = Optional.of(TelephonyProperties.default_network())
             .filter(list -> !list.isEmpty())
             .map(list -> list.get(0))
-            .orElse(NETWORK_MODE_WCDMA_PREF);
+            .orElse(NETWORK_MODE_LTE_GSM_WCDMA);
 
     int BAND_MODE_UNSPECIFIED = 0;      //"unspecified" (selected by baseband automatically)
     int BAND_MODE_EURO = 1;             //"EURO band" (GSM-900 / DCS-1800 / WCDMA-IMT-2000)


https://blog.csdn.net/weixin_44498318/article/details/109289482
Android:记录一下RK3399 安卓Q适配EC20 4G模块(附log)

4.2 SELinux权限问题
添加权限:
SELinux权限问题解决方法 - CSDN
Selinux SeAndroid理解 - CSDN
Android : SELinux 简析&修改 - 博客园
默认关闭/开启权限:
ANDROID10 关闭SELINUX权限方法 - 灰信网


参考资料:
http://www.friendlyelec.com.cn/agent.asp
http://www.friendlyelec.com.cn/
https://download.friendlyelec.com/NanoPC-T4
https://wiki.friendlyelec.com/wiki/index.php/NanoPC-T4/zh#.E4.B8.8B.E8.BD.BDAndroid10.E6.BA.90.E4.BB.A3.E7.A0.81


https://item.taobao.com/item.htm?spm=a1z09.2.0.0.37562e8dcotDm6&id=570312633249&_u=7ju3ku004a
友善NanoPC-T4瑞芯微RK3399开发板ROS双摄4K播放开源AI智能安卓10

WiKi维基教程(固件介绍,使用说明,操作步骤等)
http://wiki.friendlyelec.com/wiki/index.php/NanoPC-T4
系统固件下载
https://dl.friendlyelec.com/nanopct4
原理图(pdf格式)
http://wiki.friendlyelec.com/wiki/images/e/e0/NanoPC-T4-1902-Schematic.pdf
尺寸图(dxf格式)
http://wiki.friendlyelec.com/wiki/images/b/bc/NanoPC-T4_1802_Drawing%28dxf%29.zip


http://www.friendlyelec.com.cn/nanopi-m4.asp
NanoPi M4 | NanoPi M4V2

https://wiki.friendlyelec.com/wiki/index.php/NanoPi_M4/zh
15.3 编译Android10源代码
15.3.1 下载Android10源代码
有以下两种途径获取 Android10 的源代码,都需要联网:

使用网盘里的git repo压缩包
网盘下载地址: 点击进入

https://download.friendlyelec.com/NanoPiM4
https://pan.baidu.com/share/init?surl=oBLn9H31hILJKEPQXgrUog
提取码:yn6r

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处:http://www.mzph.cn/news/607026.shtml

如若内容造成侵权/违法违规/事实不符,请联系多彩编程网进行投诉反馈email:809451989@qq.com,一经查实,立即删除!

相关文章

Linux文件系统与日志分析

目录 一、Linux文件系统 1、inode与block 2、查看inode号码的命令 3、inode包含文件的元信息 4、Linux系统文件的三个主要时间属性 5、用户通过文件名打开文件时系统内部过程 6、inode的大小 7、inode的特点 二、日志 1、日志的功能 2、日志文件的分类 3、系统日志…

解锁前端新潜能:如何使用 Rust 锈化前端工具链

前言 近年来&#xff0c;Rust的受欢迎程度不断上升。首先&#xff0c;在操作系统领域&#xff0c;Rust 已成为 Linux 内核官方认可的开发语言之一&#xff0c;Windows 也宣布将使用 Rust 来重写内核&#xff0c;并重写部分驱动程序。此外&#xff0c;国内手机厂商 Vivo 也宣布…

语言栏中的半角和全角

语言栏中的半角和全角 1. 语言栏2. Halfwidth and fullwidth forms3. Monospaced fontReferences 1. 语言栏 任务栏设置 时间和语言 输入 高级键盘设置 文本服务和输入语言 2. Halfwidth and fullwidth forms 半角和全角&#xff0c;别名半形和全形。 In CJK (Chinese, Japa…

sentinel入门,转载的,不记得在哪复制的了

sentinel 基本概念 开发的原因&#xff0c;需要对吞吐量&#xff08;TPS&#xff09;、QPS、并发数、响应时间&#xff08;RT&#xff09;几个概念做下了解&#xff0c;查自百度百科&#xff0c;记录如下&#xff1a; 响应时间(RT)   响应时间是指系统对请求作出响应的时间。…

基于多反应堆的高并发服务器【C/C++/Reactor】(中)HttpResponse的定义和初始化 以及组织 HttpResponse 响应消息

一、HttpResponse的定义 1.定义状态码枚举 // 定义状态码枚举 enum HttpStatusCode {Unknown 0,OK 200,MovedPermanently 301,MovedTemporarily 302,BadRequest 400,NotFound 404 }; 2.HTTP 响应报文格式 这个数据块主要是分为四部分 第一部分是状态行第二部分是响应…

Hyperledger Fabric 管理链码 peer lifecycle chaincode 指令使用

链上代码&#xff08;Chaincode&#xff09;简称链码&#xff0c;包括系统链码和用户链码。系统链码&#xff08;System Chaincode&#xff09;指的是 Fabric Peer 中负责系统配置、查询、背书、验证等平台功能的代码逻辑&#xff0c;运行在 Peer 进程内&#xff0c;将在第 14 …

基于多反应堆的高并发服务器【C/C++/Reactor】(中)HttpRequest模块 解析http请求协议

一、HTTP响应报文格式 HTTP/1.1 200 OK Bdpagetype: 1 Bdqid: 0xf3c9743300024ee4 Cache-Control: private Connection: keep-alive Content-Encoding: gzip Content-Type: text/html;charsetutf-8 Date: Fri, 26 Feb 2021 08:44:35 GMT Expires: Fri, 26 Feb 2021 08:44:35 GM…

今日实践 — 附加数据库/重定向失败如何解决?

WMS数据库与重定向 前言正文如何建立数据库连接&#xff1f;第一步&#xff1a;打开SSMS&#xff0c;右击数据库&#xff0c;点击附加第二步&#xff1a;点击添加第三步&#xff1a;找到自己的数据库文件&#xff0c;点击确定按钮第四步&#xff1a;若有多个数据库&#xff0c;…

如何使用静态IP代理解决Facebook多账号注册并进行网络推广业务?

在当今的数字时代&#xff0c;社交媒体成为了企业进行网络推广的一个重要途径&#xff0c;其中&#xff0c;Facebook是最受欢迎的社交媒体之一&#xff0c;因为它可以让企业通过创建广告和页面来推广他们的产品或服务。 但是&#xff0c;使用Facebook进行网络推广时&#xff0…

【代码复现系列】paper:CycleGAN and pix2pix in PyTorch

或许有冗余步骤、之后再优化。 1.桌面右键-git bash-输入命令如下【git clone https://github.com/junyanz/pytorch-CycleGAN-and-pix2pix】 2.打开anaconda的prompt&#xff0c;cd到pytorch-CycleGAN-and-pix2pix路径 3.在prompt里输入【conda env create -f environment.y…

基于YOLOv7开发构建道路交通场景下CCTSDB2021交通标识检测识别系统

交通标志检测是交通标志识别系统中的一项重要任务。与其他国家的交通标志相比&#xff0c;中国的交通标志有其独特的特点。卷积神经网络&#xff08;CNN&#xff09;在计算机视觉任务中取得了突破性进展&#xff0c;在交通标志分类方面取得了巨大的成功。CCTSDB 数据集是由长沙…

OpenFeign超时控制

OpenFeign超时控制 前面简单介绍了Feign和OpenFeign的关系&#xff0c;言归正传&#xff0c;接下来我们看看OpenFeign如何设置调用超时&#xff0c;openFeign其实是有默认的超时时间的&#xff0c;默认分别是连接超时时间10秒、读超时时间60秒&#xff0c;源码在feign.Request…

十九:爬虫最终篇-平安银行商城实战

平安银行商场实战 需求 获取该商城商品信息 目标网址 https://m.yqb.com/bank/product-item-50301196.html?mcId1583912328849970&loginModepab&historyy&sceneModem&traceid30187_4dXJVel1iop详细步骤 1、寻找数据接口 2、对比payload寻找可疑参数 3、多…

图像融合论文阅读:CrossFuse: 一种基于交叉注意机制的红外与可见光图像融合方法

article{li2024crossfuse, title{CrossFuse: A novel cross attention mechanism based infrared and visible image fusion approach}, author{Li, Hui and Wu, Xiao-Jun}, journal{Information Fusion}, volume{103}, pages{102147}, year{2024}, publisher{Elsevier} } 论文…

当试图回复传入消息时,消息应用程序会闪烁

问题描述&#xff1a; Actual Results: Unable to reply for incoming message as Messaging app flickers and closes. Expected Results: User should be able to send reply for incoming messages. Reproduction Steps: Stay in home screen. Receive an incoming mes…

如何在 Ubuntu 20.04 上安装和使用 Docker

前些天发现了一个人工智能学习网站&#xff0c;通俗易懂&#xff0c;风趣幽默&#xff0c;最重要的屌图甚多&#xff0c;忍不住分享一下给大家。点击跳转到网站。 如何在 Ubuntu 20.04 上安装和使用 Docker 介绍 Docker是一个可以简化容器中应用程序进程管理过程的应用程序。…

拦截器HandlerInterceptor | springmvc系列

拦截器&#xff0c;通俗来来将&#xff0c;就是我们将访问某个路径的请求给拦截下来&#xff0c;然后可以对这个请求做一些操作 基本使用 创建拦截器类 让类实现HandlerInterceptor接口&#xff0c;重写接口中的三个方法。 Component //定义拦截器类&#xff0c;实现Handle…

Python实现PowerPoint(PPT/PPTX)到PDF的批量转换

演示文稿是一种常见传达信息、展示观点和分享内容的形式&#xff0c;特别是PowerPoint演示文稿&#xff0c;广泛应用于各行各业&#xff0c;几乎是演讲等场合的必备工具。然而&#xff0c;演示文稿也有其限制&#xff0c;对设备的要求较高&#xff0c;且使用不同的软件或设备演…

Ubuntu下AI4Green开源ELN服务的简单部署

主部署程序&#xff1a;AI4Green 配置参考这篇文档&#xff1a;AI4Green开源ELN&#xff08;电子实验记录本&#xff09;-CSDN博客 流量转发和负载均衡&#xff1a;使用Nginx 配置参考这篇文档&#xff1a;Nginx负载均衡-CSDN博客 SSL配置部分参考这篇文档&#xff1a; 设置…

SpringBoot-开启Actuator监控

Spring Boot Actuator是Spring Boot提供的一种管理和监控应用程序的框架&#xff0c;可以帮助我们了解应用程序的运行状况&#xff0c;提供HTTP端点来暴露应用程序的不同方面&#xff0c;如健康状况、指标、日志和运行时信息等。 开启Actuator监控&#xff0c;我们可以通过HTT…