PowerDesigner中NAME和COMMENT的互相转换,需要执行语句

原文：

http://www.cnblogs.com/yelaiju/archive/2013/04/26/3044828.html

 

由于PDM 的表中 Name 会默认=Code 所以很不方便, 所以需要将 StereoType 显示到表的外面来

打开[工具]->[显示属性](英文:Display Preferences) ->Content->Table->右边面板Columns框中 勾选: StereoType ,这样再在 StereoType中填入code字段相同内容就会显示在图形界面上了

 

使用说明: 在【Tools】-【Execute Commands】-【Edit/Run Script】 下。输入下面你要选择的语句即可，也可以保存起来，以便下次使用，后缀为.vbs。

 需要注意的问题是：运行语句时必须在Module模式下，如果是导出报表时执行会出现错误提示。

1.Name转到Comment注释字段。一般情况下只填写NAME，COMMENT可以运行语句自动生成。

将该语句保存为name2comment.vbs

原地址的代码有一些格式上的错误，现已修正。 

 

 

'把pd中那么name想自动添加到comment里面
'如果comment为空,则填入name;如果不为空,则保留不变,这样可以避免已有的注释丢失.

Option   Explicit 
ValidationMode   =   True 
InteractiveMode   =   im_Batch 

Dim   mdl   '   the   current   model 

'   get   the   current   active   model 
Set   mdl   =   ActiveModel 
If   (mdl   Is   Nothing)   Then 
      MsgBox   "There   is   no   current   Model " 
ElseIf   Not   mdl.IsKindOf(PdPDM.cls_Model)   Then 
      MsgBox   "The   current   model   is   not   an   Physical   Data   model. " 
Else 
      ProcessFolder   mdl 
End   If 

'   This   routine   copy   name   into   comment   for   each   table,   each   column   and   each   view 
'   of   the   current   folder 
Private   sub   ProcessFolder(folder)    
      Dim   Tab   'running     table    
      for   each   Tab   in   folder.tables    
            if   not   tab.isShortcut then
                     if  trim(tab.comment)="" then'如果有表的注释,则不改变它.如果没有表注释.则把name添加到注释里面.
                        tab.comment   =   tab.name
                     end if  
                  Dim   col   '   running   column    
                  for   each   col   in   tab.columns   
                        if trim(col.comment)="" then '如果col的comment为空,则填入name,如果已有注释,则不添加;这样可以避免已有注释丢失.
                           col.comment=   col.name   
                        end if 
                  next    
            end   if    
      next    
  
      Dim   view   'running   view    
      for   each   view   in   folder.Views    
            if   not   view.isShortcut and trim(view.comment)=""  then    
                  view.comment   =   view.name    
            end   if    
      next    
  
      '   go   into   the   sub-packages    
      Dim   f   '   running   folder    
      For   Each   f   In   folder.Packages    
            if   not   f.IsShortcut   then    
                  ProcessFolder   f    
            end   if    
      Next    
end   sub 

 

 

 

2.将Comment内容保存到NAME中，comment2name.vbs 实习互换。语句为：

 

Option   Explicit    
ValidationMode   =   True    
InteractiveMode   =   im_Batch    
  
Dim   mdl   '   the   current   model    
  
'   get   the   current   active   model    
Set   mdl   =   ActiveModel    
If   (mdl   Is   Nothing)   Then    
      MsgBox   "There   is   no   current   Model "    
ElseIf   Not   mdl.IsKindOf(PdPDM.cls_Model)   Then    
      MsgBox   "The   current   model   is   not   an   Physical   Data   model. "    
Else    
      ProcessFolder   mdl    
End   If    
  
Private   sub   ProcessFolder(folder)    
On Error Resume Next   
      Dim   Tab   'running     table    
      for   each   Tab   in   folder.tables    
            if   not   tab.isShortcut   then    
                  tab.name   =   tab.comment   
                  Dim   col   '   running   column    
                  for   each   col   in   tab.columns    
                  if col.comment="" then   
                  else  
                        col.name=   col.comment    
                  end if  
                  next    
            end   if    
      next    
  
      Dim   view   'running   view    
      for   each   view   in   folder.Views    
            if   not   view.isShortcut   then    
                  view.name   =   view.comment    
            end   if    
      next    
  
      '   go   into   the   sub-packages    
      Dim   f   '   running   folder    
      For   Each   f   In   folder.Packages    
            if   not   f.IsShortcut   then    
                  ProcessFolder   f    
            end   if    
      Next    
end   sub