nginx学习(3)Nginx 负载均衡

Nginx 负载均衡 实战案例

实现效果
浏览器地址栏输入地址 http://172.31.0.99/oa/a.html，负载均衡效果，平均在 8083 和 8084 端口中，刷新浏览器，显示不同

一、配置

1、先创建2个文件夹tomcat8083和tomcat8084，并将apache-tomcat-8.5.87解压到tomcat8083和tomcat8084中

（或者复制一份tomcat8081中的/apache-tomcat-8.5.87到这两个文件中）

[root@oa tools]# mkdir tomcat8083
[root@oa tools]# mkdir tomcat8084

在这里插入图片描述

[root@oa tools]# cp -r /tools/tomcat8081/apache-tomcat-8.5.87 tomcat8083
[root@oa tools]# cp -r /tools/tomcat8081/apache-tomcat-8.5.87 tomcat8084

2、修改Tomcat配置文件

tomcat8083

2、将tomcat8083中的server.xml内容修改后如下：
在这里插入图片描述

2.1、修改server 的默认端口，由默认8005->8093
在这里插入图片描述

2.2、修改http协议的默认端口，由默认的8080->8083
在这里插入图片描述

2.3修改默认ajp协议的默认端口，由默认的8009->9003
在这里插入图片描述

最终修改文件：

<?xml version="1.0" encoding="UTF-8"?>
<!--Licensed to the Apache Software Foundation (ASF) under one or morecontributor license agreements.  See the NOTICE file distributed withthis work for additional information regarding copyright ownership.The ASF licenses this file to You under the Apache License, Version 2.0(the "License"); you may not use this file except in compliance withthe License.  You may obtain a copy of the License athttp://www.apache.org/licenses/LICENSE-2.0Unless required by applicable law or agreed to in writing, softwaredistributed under the License is distributed on an "AS IS" BASIS,WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.See the License for the specific language governing permissions andlimitations under the License.
-->
<!-- Note:  A "Server" is not itself a "Container", so you may notdefine subcomponents such as "Valves" at this level.Documentation at /docs/config/server.html-->
<Server port="8093" shutdown="SHUTDOWN"><Listener className="org.apache.catalina.startup.VersionLoggerListener" /><!-- Security listener. Documentation at /docs/config/listeners.html<Listener className="org.apache.catalina.security.SecurityListener" />--><!-- APR library loader. Documentation at /docs/apr.html --><Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /><!-- Prevent memory leaks due to use of particular java/javax APIs--><Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" /><Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" /><Listener className="org.apache.catalina.core.ThreadLocalLeakPreventionListener" /><!-- Global JNDI resourcesDocumentation at /docs/jndi-resources-howto.html--><GlobalNamingResources><!-- Editable user database that can also be used byUserDatabaseRealm to authenticate users--><Resource name="UserDatabase" auth="Container"type="org.apache.catalina.UserDatabase"description="User database that can be updated and saved"factory="org.apache.catalina.users.MemoryUserDatabaseFactory"pathname="conf/tomcat-users.xml" /></GlobalNamingResources><!-- A "Service" is a collection of one or more "Connectors" that sharea single "Container" Note:  A "Service" is not itself a "Container",so you may not define subcomponents such as "Valves" at this level.Documentation at /docs/config/service.html--><Service name="Catalina"><!--The connectors can use a shared executor, you can define one or more named thread pools--><!--<Executor name="tomcatThreadPool" namePrefix="catalina-exec-"maxThreads="150" minSpareThreads="4"/>--><!-- A "Connector" represents an endpoint by which requests are receivedand responses are returned. Documentation at :Java HTTP Connector: /docs/config/http.htmlJava AJP  Connector: /docs/config/ajp.htmlAPR (HTTP/AJP) Connector: /docs/apr.htmlDefine a non-SSL/TLS HTTP/1.1 Connector on port 8083--><Connector port="8083" protocol="HTTP/1.1"connectionTimeout="20000"redirectPort="8445" /><!-- A "Connector" using the shared thread pool--><!--<Connector executor="tomcatThreadPool"port="8083" protocol="HTTP/1.1"connectionTimeout="20000"redirectPort="8445" />--><!-- Define an SSL/TLS HTTP/1.1 Connector on port 8445This connector uses the NIO implementation. The defaultSSLImplementation will depend on the presence of the APR/nativelibrary and the useOpenSSL attribute of the AprLifecycleListener.Either JSSE or OpenSSL style configuration may be used regardless ofthe SSLImplementation selected. JSSE style configuration is used below.--><!--<Connector port="8445" protocol="org.apache.coyote.http11.Http11NioProtocol"maxThreads="150" SSLEnabled="true"><SSLHostConfig><Certificate certificateKeystoreFile="conf/localhost-rsa.jks"type="RSA" /></SSLHostConfig></Connector>--><!-- Define an SSL/TLS HTTP/1.1 Connector on port 8445 with HTTP/2This connector uses the APR/native implementation which always usesOpenSSL for TLS.Either JSSE or OpenSSL style configuration may be used. OpenSSL styleconfiguration is used below.--><!--<Connector port="8445" protocol="org.apache.coyote.http11.Http11AprProtocol"maxThreads="150" SSLEnabled="true" ><UpgradeProtocol className="org.apache.coyote.http2.Http2Protocol" /><SSLHostConfig><Certificate certificateKeyFile="conf/localhost-rsa-key.pem"certificateFile="conf/localhost-rsa-cert.pem"certificateChainFile="conf/localhost-rsa-chain.pem"type="RSA" /></SSLHostConfig></Connector>--><!-- Define an AJP 1.3 Connector on port 9003 --><!--<Connector protocol="AJP/1.3"address="::1"port="9003"redirectPort="8445" />--><!-- An Engine represents the entry point (within Catalina) that processesevery request.  The Engine implementation for Tomcat stand aloneanalyzes the HTTP headers included with the request, and passes themon to the appropriate Host (virtual host).Documentation at /docs/config/engine.html --><!-- You should set jvmRoute to support load-balancing via AJP ie :<Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1">--><Engine name="Catalina" defaultHost="localhost"><!--For clustering, please take a look at documentation at:/docs/cluster-howto.html  (simple how to)/docs/config/cluster.html (reference documentation) --><!--<Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>--><!-- Use the LockOutRealm to prevent attempts to guess user passwordsvia a brute-force attack --><Realm className="org.apache.catalina.realm.LockOutRealm"><!-- This Realm uses the UserDatabase configured in the global JNDIresources under the key "UserDatabase".  Any editsthat are performed against this UserDatabase are immediatelyavailable for use by the Realm.  --><Realm className="org.apache.catalina.realm.UserDatabaseRealm"resourceName="UserDatabase"/></Realm><Host name="localhost"  appBase="webapps"unpackWARs="true" autoDeploy="true"><!-- SingleSignOn valve, share authentication between web applicationsDocumentation at: /docs/config/valve.html --><!--<Valve className="org.apache.catalina.authenticator.SingleSignOn" />--><!-- Access log processes all example.Documentation at: /docs/config/valve.htmlNote: The pattern used is equivalent to using pattern="common" --><Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs"prefix="localhost_access_log" suffix=".txt"pattern="%h %l %u %t &quot;%r&quot; %s %b" /></Host></Engine></Service>
</Server>

tomcat8084

tomcat4也是和tomcat3,修改相同的文职，变成不同的端口就行，可以看我最终修改的一下文件，就是修改成别的端口就行。

<?xml version="1.0" encoding="UTF-8"?>
<!--Licensed to the Apache Software Foundation (ASF) under one or morecontributor license agreements.  See the NOTICE file distributed withthis work for additional information regarding copyright ownership.The ASF licenses this file to You under the Apache License, Version 2.0(the "License"); you may not use this file except in compliance withthe License.  You may obtain a copy of the License athttp://www.apache.org/licenses/LICENSE-2.0Unless required by applicable law or agreed to in writing, softwaredistributed under the License is distributed on an "AS IS" BASIS,WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.See the License for the specific language governing permissions andlimitations under the License.
-->
<!-- Note:  A "Server" is not itself a "Container", so you may notdefine subcomponents such as "Valves" at this level.Documentation at /docs/config/server.html-->
<Server port="8094" shutdown="SHUTDOWN"><Listener className="org.apache.catalina.startup.VersionLoggerListener" /><!-- Security listener. Documentation at /docs/config/listeners.html<Listener className="org.apache.catalina.security.SecurityListener" />--><!-- APR library loader. Documentation at /docs/apr.html --><Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /><!-- Prevent memory leaks due to use of particular java/javax APIs--><Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" /><Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" /><Listener className="org.apache.catalina.core.ThreadLocalLeakPreventionListener" /><!-- Global JNDI resourcesDocumentation at /docs/jndi-resources-howto.html--><GlobalNamingResources><!-- Editable user database that can also be used byUserDatabaseRealm to authenticate users--><Resource name="UserDatabase" auth="Container"type="org.apache.catalina.UserDatabase"description="User database that can be updated and saved"factory="org.apache.catalina.users.MemoryUserDatabaseFactory"pathname="conf/tomcat-users.xml" /></GlobalNamingResources><!-- A "Service" is a collection of one or more "Connectors" that sharea single "Container" Note:  A "Service" is not itself a "Container",so you may not define subcomponents such as "Valves" at this level.Documentation at /docs/config/service.html--><Service name="Catalina"><!--The connectors can use a shared executor, you can define one or more named thread pools--><!--<Executor name="tomcatThreadPool" namePrefix="catalina-exec-"maxThreads="150" minSpareThreads="4"/>--><!-- A "Connector" represents an endpoint by which requests are receivedand responses are returned. Documentation at :Java HTTP Connector: /docs/config/http.htmlJava AJP  Connector: /docs/config/ajp.htmlAPR (HTTP/AJP) Connector: /docs/apr.htmlDefine a non-SSL/TLS HTTP/1.1 Connector on port 8084--><Connector port="8084" protocol="HTTP/1.1"connectionTimeout="20000"redirectPort="8445" /><!-- A "Connector" using the shared thread pool--><!--<Connector executor="tomcatThreadPool"port="8084" protocol="HTTP/1.1"connectionTimeout="20000"redirectPort="8445" />--><!-- Define an SSL/TLS HTTP/1.1 Connector on port 8445This connector uses the NIO implementation. The defaultSSLImplementation will depend on the presence of the APR/nativelibrary and the useOpenSSL attribute of the AprLifecycleListener.Either JSSE or OpenSSL style configuration may be used regardless ofthe SSLImplementation selected. JSSE style configuration is used below.--><!--<Connector port="8445" protocol="org.apache.coyote.http11.Http11NioProtocol"maxThreads="150" SSLEnabled="true"><SSLHostConfig><Certificate certificateKeystoreFile="conf/localhost-rsa.jks"type="RSA" /></SSLHostConfig></Connector>--><!-- Define an SSL/TLS HTTP/1.1 Connector on port 8445 with HTTP/2This connector uses the APR/native implementation which always usesOpenSSL for TLS.Either JSSE or OpenSSL style configuration may be used. OpenSSL styleconfiguration is used below.--><!--<Connector port="8445" protocol="org.apache.coyote.http11.Http11AprProtocol"maxThreads="150" SSLEnabled="true" ><UpgradeProtocol className="org.apache.coyote.http2.Http2Protocol" /><SSLHostConfig><Certificate certificateKeyFile="conf/localhost-rsa-key.pem"certificateFile="conf/localhost-rsa-cert.pem"certificateChainFile="conf/localhost-rsa-chain.pem"type="RSA" /></SSLHostConfig></Connector>--><!-- Define an AJP 1.3 Connector on port 9004 --><!--<Connector protocol="AJP/1.3"address="::1"port="9004"redirectPort="8445" />--><!-- An Engine represents the entry point (within Catalina) that processesevery request.  The Engine implementation for Tomcat stand aloneanalyzes the HTTP headers included with the request, and passes themon to the appropriate Host (virtual host).Documentation at /docs/config/engine.html --><!-- You should set jvmRoute to support load-balancing via AJP ie :<Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1">--><Engine name="Catalina" defaultHost="localhost"><!--For clustering, please take a look at documentation at:/docs/cluster-howto.html  (simple how to)/docs/config/cluster.html (reference documentation) --><!--<Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>--><!-- Use the LockOutRealm to prevent attempts to guess user passwordsvia a brute-force attack --><Realm className="org.apache.catalina.realm.LockOutRealm"><!-- This Realm uses the UserDatabase configured in the global JNDIresources under the key "UserDatabase".  Any editsthat are performed against this UserDatabase are immediatelyavailable for use by the Realm.  --><Realm className="org.apache.catalina.realm.UserDatabaseRealm"resourceName="UserDatabase"/></Realm><Host name="localhost"  appBase="webapps"unpackWARs="true" autoDeploy="true"><!-- SingleSignOn valve, share authentication between web applicationsDocumentation at: /docs/config/valve.html --><!--<Valve className="org.apache.catalina.authenticator.SingleSignOn" />--><!-- Access log processes all example.Documentation at: /docs/config/valve.htmlNote: The pattern used is equivalent to using pattern="common" --><Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs"prefix="localhost_access_log" suffix=".txt"pattern="%h %l %u %t &quot;%r&quot; %s %b" /></Host></Engine></Service>
</Server>

二、创建项目文件夹

tomcat8083

1、在/tools/tomcat8083/apache-tomcat-8.5.87/webapps，创建一个oa的文件夹
在这里插入图片描述
2、并在oa 的文件夹中，建立一个a.html文件，内容如下：

<!DOCTYPE html>
<html lang="en">
<head><meta charset="UTF-8"><meta name="viewport" content="width=device-width, initial-scale=1.0"><title>Document</title>
</head>
<body><h1>NGINX 负载均衡Tomcat3</h1>
</body>
</html>

tomcat8084

1、在/tools/tomcat8084/apache-tomcat-8.5.87/webapps，创建一个oa的文件夹
在这里插入图片描述
2、并在oa 的文件夹中，建立一个a.html文件，内容如下：

<!DOCTYPE html>
<html lang="en">
<head><meta charset="UTF-8"><meta name="viewport" content="width=device-width, initial-scale=1.0"><title>Document</title>
</head>
<body><h1>NGINX 负载均衡Tomcat4</h1>
</body>
</html>

三、启动Tomcatcat

1、启动tomcat8083

[root@oa tomcat8083]# cd /tools/tomcat8083/apache-tomcat-8.5.87/bin
[root@oa bin]# ./startup.sh

在这里插入图片描述

2、启动tomcat8084

[root@oa tomcat8083]# cd /tools/tomcat8084/apache-tomcat-8.5.87/bin
[root@oa bin]# ./startup.sh

在这里插入图片描述

三、配置NGINX

1、找到NGINX的配置文件/usr/local/nginx/conf 路劲 下，修改nginx.conf文件
在这里插入图片描述
2、进行负载均衡的配置
在这里插入图片描述


#user  nobody;
worker_processes  1;#error_log  logs/error.log;
#error_log  logs/error.log  notice;
#error_log  logs/error.log  info;#pid        logs/nginx.pid;events {worker_connections  1024;
}http {include       mime.types;default_type  application/octet-stream;#log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '#                  '$status $body_bytes_sent "$http_referer" '#                  '"$http_user_agent" "$http_x_forwarded_for"';#access_log  logs/access.log  main;sendfile        on;#tcp_nopush     on;#keepalive_timeout  0;keepalive_timeout  65;#gzip  on;upstream myserver {server 172.31.0.99:8083;server 172.31.0.99:8084;}server {listen       80;        #server_name  localhost;server_name  172.31.0.99; #charset koi8-r;#access_log  logs/host.access.log  main;location / {root   html;proxy_pass http://myserver;index  index.html index.htm;}#error_page  404              /404.html;# redirect server error pages to the static page /50x.html#error_page   500 502 503 504  /50x.html;location = /50x.html {root   html;}# proxy the PHP scripts to Apache listening on 127.0.0.1:80##location ~ \.php$ {#    proxy_pass   http://127.0.0.1;#}# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000##location ~ \.php$ {#    root           html;#    fastcgi_pass   127.0.0.1:9000;#    fastcgi_index  index.php;#    fastcgi_param  SCRIPT_FILENAME  /scripts$fastcgi_script_name;#    include        fastcgi_params;#}# deny access to .htaccess files, if Apache's document root# concurs with nginx's one##location ~ /\.ht {#    deny  all;#}}server {listen       8001;        #server_name  localhost;server_name  172.31.0.99; #charset koi8-r;#access_log  logs/host.access.log  main;location ~  /vod/ {proxy_pass http://127.0.0.1:8081;}location ~  /edu/ {proxy_pass http://127.0.0.1:8082;}}# another virtual host using mix of IP-, name-, and port-based configuration##server {#    listen       8000;#    listen       somename:8080;#    server_name  somename  alias  another.alias;#    location / {#        root   html;#        index  index.html index.htm;#    }#}# HTTPS server##server {#    listen       443 ssl;#    server_name  localhost;#    ssl_certificate      cert.pem;#    ssl_certificate_key  cert.key;#    ssl_session_cache    shared:SSL:1m;#    ssl_session_timeout  5m;#    ssl_ciphers  HIGH:!aNULL:!MD5;#    ssl_prefer_server_ciphers  on;#    location / {#        root   html;#        index  index.html index.htm;#    }#}}

3、启动nginx
[root@oa bin]# cd /usr/local/nginx/sbin
[root@oa sbin]# ./nginx

在这里插入图片描述

三、最终测试

访问：http://172.31.0.99/oa/a.html

1、第一次访问，
在这里插入图片描述
2、直接在浏览器中右击，“”“重新加载”，就看到如下的界面
在这里插入图片描述

本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：http://www.mzph.cn/news/149050.shtml

如若内容造成侵权/违法违规/事实不符，请联系多彩编程网进行投诉反馈email:809451989@qq.com，一经查实，立即删除！

相关文章

ChatGpt3.5已经应用了一段时间，分享一些自己的使用心得.

ChatGpt3.5已经应用了一段时间，分享一些自己的使用心得.

首先ChatGpt3.5的文本生成功能十分强大&#xff0c;但是chatgpt有一些使用规范大家需要注意&#xff0c;既然chat是一种工具&#xff0c;我们就需要学会它的使用说明&#xff0c;学会chatgpt的引用语句&#xff0c;会极大的方便我们的使用。我们需要做以下的准备。 明确任务和目…
阅读更多...
挖掘PostgreSQL事务的“中间态”----更加严谨的数据一致性？

挖掘PostgreSQL事务的“中间态”----更加严谨的数据一致性？

1.问题 今天在上班途中&#xff0c;中心的妹纸突然找我&#xff0c;非常温柔的找我帮忙看个数据库的报错。当然以我的性格&#xff0c;妹子找我的事情对我来说优先级肯定是最高的&#xff0c;所以立马放下手中的“小事”&#xff0c;转身向妹子走去。具体是一个什么样的问题呢…
阅读更多...
unity-模块卸载重新安装

unity-模块卸载重新安装

unity-模块卸载重新安装 发现模块错误&#xff1f;发现不可以卸载重装&#xff1f;... 依据以下步骤试试&#xff1a; 1. 删除模块文件夹&#xff08;以安卓模块为例&#xff09; 2. 找见编辑器模块json 3. 找见所有安卓相关模块修改selected为false&#xff1a;"sel…
阅读更多...
在QGIS中加载显示3DTiles数据

在QGIS中加载显示3DTiles数据

“我们最近有机会在QGIS 3.34中实现一个非常令人兴奋的功能–能够以“Cesium 3D Tiles”格式加载和查看3D内容&#xff01;” ——QGIS官方的 宣传介绍。 体验一下&#xff0c;感觉就是如芒刺背、如坐针毡、如鲠在喉。 除非我电脑硬件有问题&#xff0c;要么QGIS的3Dtiles是真…
阅读更多...
数据仓库高级面试题

数据仓库高级面试题

数仓高内聚低耦合是怎么做的 定义 高内聚&#xff1a;强调模块内部的相对独立性&#xff0c;要求模块内部的元素尽可能的完成一个功能&#xff0c;不混杂其他功能&#xff0c;从而使模块保持简洁&#xff0c;易于理解和管理。 低耦合&#xff1a;模块之间的耦合度要尽可能的…
阅读更多...
wpf devexpress 绑定数据编辑器

wpf devexpress 绑定数据编辑器

定义视图模型 打开前一个项目 打开RegistrationViewModel.cs文件添加如下属性到RegistrationViewModel类 [POCOViewModel] public class RegistrationViewModel {public static RegistrationViewModel Create() {return ViewModelSource.Create(() > new RegistrationVie…
阅读更多...
OpenAI的Whisper蒸馏：蒸馏后的Distil-Whisper速度提升6倍

OpenAI的Whisper蒸馏：蒸馏后的Distil-Whisper速度提升6倍

1 Distil-Whisper诞生 Whisper 是 OpenAI 研发并开源的一个自动语音识别&#xff08;ASR&#xff0c;Automatic Speech Recognition&#xff09;模型&#xff0c;他们通过从网络上收集了 68 万小时的多语言&#xff08;98 种语言&#xff09;和多任务&#xff08;multitask&am…
阅读更多...
Golang环境搭建Win10（简洁版）

Golang环境搭建Win10（简洁版）

Golang环境搭建Win10 Golang环境搭建(Win10)一、前言二、Golang下载三、配置环境变量3.1、配置GOROOT3.2、配置GOPATH3.3、配置GOPROXY代理 Golang环境搭建(Win10) 一、前言 Go&#xff08;又称 Golang&#xff09;是 Google 的 Robert Griesemer&#xff0c;Rob Pike 及 Ken…
阅读更多...
大模型的语言能力

大模型的语言能力

NLP作为一个领域为基础模型开辟了道路。虽然这些模型在标准基准测试中占据主导地位&#xff0c;但这些模型目前获得的能力与那些将语言描述为人类交流和思维的复杂系统的能力之间存在明显的差距。针对这一点&#xff0c;我们强调语言变异的全部范围&#xff08;例如&#xff0c…
阅读更多...
用照片预测人的年龄【图像回归】

用照片预测人的年龄【图像回归】

在图像分类任务中&#xff0c;卷积神经网络 (CNN) 是非常强大的神经网络架构。 然而&#xff0c;鲜为人知的是&#xff0c;它们同样能够执行图像回归任务。 图像分类和图像回归任务之间的基本区别在于分类任务中的目标变量&#xff08;我们试图预测的东西&#xff09;不是连续…
阅读更多...
Perl的LWP::UserAgent库爬虫程序怎么写

Perl的LWP::UserAgent库爬虫程序怎么写

Perl的LWP::UserAgent库是一个用于发送HTTP请求的Perl模块。它可以用于编写Web爬虫、测试Web应用程序、自动化Web操作等。以下是一个简单的使用LWP::UserAgent库发送HTTP GET请求的Perl脚本的例子&#xff1a; #!/usr/bin/perluse strict; use warnings; use LWP::UserAgent;# …
阅读更多...
向量数据库——AI时代的基座

向量数据库——AI时代的基座

1.前言 向量数据库在构建基于大语言模型的行业智能应用中扮演着重要角色。大模型虽然能回答一般性问题&#xff0c;但在垂直领域服务中&#xff0c;其知识深度、准确度和时效性有限。为了解决这一问题&#xff0c;企业可以利用向量数据库结合大模型和自有知识资产&#xff0c;…
阅读更多...
PY32F002B从压缩包到实现串口printf输出

PY32F002B从压缩包到实现串口printf输出

最近学习使用芯领的PY32F002B开发板&#xff0c;记录学习历程供有同样需求的人参考。 本文主要讲述利用开发板实现printf语句串口输出。 开发环境的初步搭建 官方提供了一个压缩文件&#xff0c;文件名py32f002B_231026.zip&#xff0c; 链接&#xff1a;https://pan.baidu.c…
阅读更多...
什么是Selenium？如何使用Selenium进行自动化测试？

什么是Selenium？如何使用Selenium进行自动化测试？

什么是 Selenium&#xff1f; Selenium 是一种开源工具&#xff0c;用于在 Web 浏览器上执行自动化测试&#xff08;使用任何 Web 浏览器进行 Web 应用程序测试&#xff09;。   等等&#xff0c;先别激动&#xff0c;让我再次重申一下&#xff0c;Selenium 仅可以测试Web应用…
阅读更多...
internet download manager2024中文绿色版(IDM下载器)

internet download manager2024中文绿色版(IDM下载器)

在现代互联网时代&#xff0c;文件下载已经成为我们日常生活中必不可少的一项技能。无论是下载软件、音乐、视频还是其他文件&#xff0c;一个高效的下载方法能够为我们节省时间和精力。本文将为您提供一份简明扼要的下载教程&#xff0c;让您轻松掌握文件下载的技巧。 intern…
阅读更多...
jsp中使用PDF.js实现pdf文件的预览

jsp中使用PDF.js实现pdf文件的预览

本文介绍的是在使用jsp作为模板引擎的spring-mvc项目中&#xff0c;如何利用 PDF.js实现pdf文件的预览。 1、下载 PDF.js Getting Started (mozilla.github.io) 下载解压后其中有两个目录&#xff0c;直接将这两个文件夹放到项目的web资源目录中。此时相当于把PDF.js这个项目也…
阅读更多...
Vue h5页面手指滑动图片

Vue h5页面手指滑动图片

场景&#xff1a; 四张图&#xff0c;要求随着手指滑动而滑动 代码&#xff1a; imgs是父盒子 poster-item是每个图片 .imgs {white-space: nowrap;overflow: hidden;overflow-x: auto;margin-bottom: 17px;.poster-item {display: inline-block;vertical-align: middle;wid…
阅读更多...
NI USRP RIO软件无线电

NI USRP RIO软件无线电

NI USRP RIO软件无线电 NI USRP RIO是SDR游戏规则的改变者&#xff0c;它为无线通信设计人员提供了经济实惠的SDR和前所不高的性能&#xff0c;可帮助开发下一代5G无线通信系统。“USRP RIO”是一个术语&#xff0c;用于描述包含FPGA的USRP软件定义无线电设备&#xff0c;例如…
阅读更多...
机器学习第9天：决策树分类

机器学习第9天：决策树分类

文章目录 机器学习专栏 介绍 基本思想 使用代码 深度探索 优点 估计概率 训练算法 CART成本函数 实例数与不纯度 正则化 在鸢尾花数据集上训练决策树 机器学习专栏 机器学习_Nowl的博客-CSDN博客 介绍 作用&#xff1a;分类 原理&#xff1a;构建一个二叉树&#…
阅读更多...
数据结构与算法之美学习笔记：21 | 哈希算法（上）：如何防止数据库中的用户信息被脱库？

数据结构与算法之美学习笔记：21 | 哈希算法（上）：如何防止数据库中的用户信息被脱库？

目录 前言什么是哈希算法&#xff1f;应用一&#xff1a;安全加密应用二&#xff1a;唯一标识应用三&#xff1a;数据校验散列函数解答开篇内容小节 前言 本节课程思维导图 如果你是 一名工程师&#xff0c;你会如何存储用户密码这么重要的数据吗&#xff1f;仅仅 MD5 加密一下…
阅读更多...
推荐文章
最新文章

Copyright @ 2022~2023