Juniper PPPOE双线路冗余RPM配置

news/2025/4/4 7:15:09/文章来源:https://blog.csdn.net/sj349781478/article/details/134387948

------------------
浮动静态路由
set routing-options static route 0.0.0.0/0 next-hop pp0.0 qualified-next-hop pp0.1 preference 10

-----------------
RPM测试的内容，包括从哪个接口发起测试，测试ping等等
#指定探针类型用ICMP请求
#探测的目标地址
#探测间隔
#探测阈值连续5次探测丢失后触发PING_TEST_FAILED event
#从什么接口发起探测
set services rpm probe Internet01-DNS-PING test ISP-DNS probe-type icmp-ping
set services rpm probe Internet01-DNS-PING test ISP-DNS target address 223.5.5.5
set services rpm probe Internet01-DNS-PING test ISP-DNS probe-count 5
set services rpm probe Internet01-DNS-PING test ISP-DNS thresholds successive-loss 5
set services rpm probe Internet01-DNS-PING test ISP-DNS destination-interface pp0.0

set services rpm probe Internet02-DNS-PING test ISP-DNS probe-type icmp-ping
set services rpm

本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：http://www.mzph.cn/news/141227.shtml

如若内容造成侵权/违法违规/事实不符，请联系多彩编程网进行投诉反馈email:809451989@qq.com，一经查实，立即删除！