注：对于"Echo or Echo Reply Message"类型的icmp报文，响应报文的Identiy和Sequence Number的值与请求报文的这两个字段的值要相同。

Identifier（标识符）字段通常由发送方设置，并被用于将ICMP请求与相应的回复相关联。当发送ICMP请求时，发送方会将一个特定的值放入Identifier字段中，在收到对应的回复时可以通过该值进行匹配。

Sequence Number（序列号）字段用于按顺序编号ICMP请求或回复报文。它起到了帮助接收方正确排序和处理报文的作用。

#include <rte_eal.h>
#include <rte_ethdev.h>
#include <rte_mbuf.h>
#include <stdio.h>
#include <arpa/inet.h>#define NUM_MBUFS (4096-1) // 内存池中 mbuf 的数量
#define BURST_SIZE 32
#define MAKE_IPV4_ADDR(a, b, c, d) (a + (b<<8) + (c<<16) + (d<<24))static uint32_t gLocalIp = MAKE_IPV4_ADDR(192, 168, 1, 5);//当前ip，网络字节序static uint8_t gSrcMac[RTE_ETHER_ADDR_LEN];int gDpdkPortId = 0;static const struct rte_eth_conf port_conf_default = {.rxmode = {.max_rx_pkt_len = RTE_ETHER_MAX_LEN}
};static void ng_init_port(struct rte_mempool *mbuf_pool) {//dpdk绑定的网卡数量uint16_t nb_sys_ports = rte_eth_dev_count_avail();if (nb_sys_ports == 0) {rte_exit(EXIT_FAILURE, "not support eth\n");}struct rte_eth_dev_info dev_info;/*获取以太网设备的配置和状态信息。它通常用于初始化网络设备、*配置网络设备或者获取网络设备的状态信息。*这里的端口号和网卡是一一对应的*/rte_eth_dev_info_get(gDpdkPortId, &dev_info);const int num_rx_queues = 1;	//接收队列个数const int num_tx_queues = 1;	//发送队列个数struct rte_eth_conf port_conf = port_conf_default;rte_eth_dev_configure(gDpdkPortId, num_rx_queues, num_tx_queues, &port_conf);// 0是0号接收队列// 128是队列长度if (rte_eth_rx_queue_setup(gDpdkPortId, 0, 128, rte_eth_dev_socket_id(gDpdkPortId), NULL, mbuf_pool) < 0) {rte_exit(EXIT_FAILURE, "Could not setup RX queue\n");}struct rte_eth_txconf txq_conf = dev_info.default_txconf;//offloads 成员是一个 64 位无符号整数，每个比特位表示不同的接收功能选项txq_conf.offloads = port_conf.rxmode.offloads;/* 0是0号发送队列 * 1024是队列长度* 发送队列长度设置太小运行时会报错:Invalid value for nb_tx_desc(=128), should be: <= 4096, >= 512, and a product of 1*/if (rte_eth_tx_queue_setup(gDpdkPortId, 0, 1024, rte_eth_dev_socket_id(gDpdkPortId), &txq_conf) < 0) {rte_exit(EXIT_FAILURE, "Could not setup TX queue\n");}if (rte_eth_dev_start(gDpdkPortId) < 0) {rte_exit(EXIT_FAILURE, "Could not start\n");}}static uint16_t ng_checksum(uint16_t *addr, int count) {register long sum = 0;while (count > 1) {sum += *(unsigned short*)addr++;count -= 2;}if (count > 0) {sum += *(unsigned char *)addr;}while (sum >> 16) {sum = (sum & 0xffff) + (sum >> 16);}return ~sum;
}static void ng_encode_icmp_pkt(uint8_t *msg, uint8_t *dst_mac, uint32_t sip, uint32_t dip, uint16_t id, uint16_t seqnb) {//设置以太网头struct rte_ether_hdr *eth = (struct rte_ether_hdr *)msg;rte_memcpy(eth->s_addr.addr_bytes, gSrcMac, RTE_ETHER_ADDR_LEN);rte_memcpy(eth->d_addr.addr_bytes, dst_mac, RTE_ETHER_ADDR_LEN);eth->ether_type = htons(RTE_ETHER_TYPE_IPV4);//设置ipv4头struct rte_ipv4_hdr *ip = (struct rte_ipv4_hdr *)(eth + 1);ip->version_ihl = 0x45;ip->type_of_service = 0;ip->total_length = htons(sizeof(struct rte_icmp_hdr) + sizeof(struct rte_ipv4_hdr));ip->packet_id = 0;ip->fragment_offset = 0;ip->time_to_live = 64;ip->next_proto_id = IPPROTO_ICMP;ip->src_addr = sip;ip->dst_addr = dip;//计算ip头部校验和时，先把该字段置为0(ip校验和只包括头部)ip->hdr_checksum = 0;ip->hdr_checksum = rte_ipv4_cksum(ip);//设置icmp报文struct rte_icmp_hdr *icmp = (struct rte_icmp_hdr *)(ip + 1);icmp->icmp_type = RTE_IP_ICMP_ECHO_REPLY;icmp->icmp_code = 0;icmp->icmp_ident = id;icmp->icmp_seq_nb = seqnb;icmp->icmp_cksum = 0;icmp->icmp_cksum = ng_checksum((uint16_t *)icmp, sizeof(struct rte_icmp_hdr));}static void ng_send_icmp(struct rte_mempool *mbuf_pool, uint8_t *dst_mac, uint32_t sip, uint32_t dip, uint16_t id, uint16_t seqnb) {const unsigned total_len = sizeof(struct rte_ether_hdr) + sizeof(struct rte_ipv4_hdr) + sizeof(struct rte_icmp_hdr);//从内存中申请一个mbufstruct rte_mbuf *mbuf = rte_pktmbuf_alloc(mbuf_pool);if (mbuf == NULL) {rte_exit(EXIT_FAILURE, "rte_pktmbuf_alloc\n");}mbuf->pkt_len = total_len;mbuf->data_len = total_len;//用于将数据包缓冲区（packet buffer）转换为指定类型的数据指针，也就是mbuf存储数据包的首地址uint8_t *pktdata = rte_pktmbuf_mtod(mbuf, uint8_t*);ng_encode_icmp_pkt(pktdata, dst_mac, sip, dip, id, seqnb);rte_eth_tx_burst(gDpdkPortId, 0, &mbuf, 1);rte_pktmbuf_free(mbuf);
}static void ng_encode_arp_pkt(uint8_t *msg, uint8_t *dst_mac, uint32_t sip, uint32_t dip) {//设置以太网头struct rte_ether_hdr *eth = (struct rte_ether_hdr *)msg;rte_memcpy(eth->s_addr.addr_bytes, &gSrcMac, RTE_ETHER_ADDR_LEN);rte_memcpy(eth->d_addr.addr_bytes, dst_mac, RTE_ETHER_ADDR_LEN);eth->ether_type = htons(RTE_ETHER_TYPE_ARP);//设置arp报文struct rte_arp_hdr *arp = (struct rte_arp_hdr *)(eth + 1);arp->arp_hardware = htons(1);arp->arp_protocol = htons(RTE_ETHER_TYPE_IPV4);arp->arp_hlen = RTE_ETHER_ADDR_LEN;arp->arp_plen = sizeof(uint32_t);arp->arp_opcode = htons(RTE_ARP_OP_REPLY);rte_memcpy(arp->arp_data.arp_sha.addr_bytes, &gSrcMac, RTE_ETHER_ADDR_LEN);rte_memcpy(arp->arp_data.arp_tha.addr_bytes, dst_mac, RTE_ETHER_ADDR_LEN);arp->arp_data.arp_sip = sip;arp->arp_data.arp_tip= dip;
}static void ng_send_arp(struct rte_mempool *mbuf_pool, uint8_t *dst_mac, uint32_t sip, uint32_t dip) {const unsigned total_len = sizeof(struct rte_ether_hdr) + sizeof(struct rte_arp_hdr);//从内存中申请一个mbufstruct rte_mbuf *mbuf = rte_pktmbuf_alloc(mbuf_pool);if (mbuf == NULL) {rte_exit(EXIT_FAILURE, "rte_pktmbuf_alloc\n");}mbuf->pkt_len = total_len;mbuf->data_len = total_len;uint8_t *pktdata = rte_pktmbuf_mtod(mbuf, uint8_t*);ng_encode_arp_pkt(pktdata, dst_mac, sip, dip);rte_eth_tx_burst(gDpdkPortId, 0, &mbuf, 1);rte_pktmbuf_free(mbuf);
}int main(int argc, char *argv[]) {/*dpdk初始化资源*用于初始化 Environment Abstraction Layer (EAL)。EAL 是 DPDK 的一个核心组件，*负责抽象和管理硬件和操作系统依赖性，使得上层应用可以在不同的硬件和操作系统上*以统一的方式运行。*/if (rte_eal_init(argc, argv) < 0) {rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");}//内存池，接收的数据存在该内存池中struct rte_mempool *mbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NUM_MBUFS,0, 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());if (mbuf_pool == NULL) {rte_exit(EXIT_FAILURE, "Could not create mbuf pool\n");}ng_init_port(mbuf_pool);//获取dpdk绑定的网卡源macrte_eth_macaddr_get(gDpdkPortId, (struct rte_ether_addr *)gSrcMac);while(1) {struct rte_mbuf *mbufs[BURST_SIZE] = {0};unsigned num_recvd = rte_eth_rx_burst(gDpdkPortId, 0, mbufs, BURST_SIZE);if (num_recvd > BURST_SIZE) {rte_exit(EXIT_FAILURE, "Error receive from eth\n");}unsigned int i = 0;for (i = 0; i < num_recvd; i++) {struct rte_ether_hdr *ehdr = rte_pktmbuf_mtod(mbufs[i], struct rte_ether_hdr*);//arp是广播if (ehdr->ether_type == rte_cpu_to_be_16(RTE_ETHER_TYPE_ARP)) {struct rte_arp_hdr *ahdr = (struct rte_arp_hdr *)(ehdr + 1);if (ahdr->arp_data.arp_tip == gLocalIp) {ng_send_arp(mbuf_pool, ahdr->arp_data.arp_sha.addr_bytes, ahdr->arp_data.arp_tip, ahdr->arp_data.arp_sip);}rte_pktmbuf_free(mbufs[i]);continue;}if (ehdr->ether_type != rte_cpu_to_be_16(RTE_ETHER_TYPE_IPV4)) {rte_pktmbuf_free(mbufs[i]);continue;}struct rte_ipv4_hdr *iphdr = rte_pktmbuf_mtod_offset(mbufs[i], struct rte_ipv4_hdr*, sizeof(struct rte_ether_hdr));if (iphdr->next_proto_id == IPPROTO_ICMP) {struct rte_icmp_hdr *icmphdr = (struct rte_icmp_hdr *)(iphdr + 1);if (icmphdr->icmp_type == RTE_IP_ICMP_ECHO_REQUEST) {ng_send_icmp(mbuf_pool, ehdr->s_addr.addr_bytes, iphdr->dst_addr, iphdr->src_addr, icmphdr->icmp_ident, icmphdr->icmp_seq_nb);}}rte_pktmbuf_free(mbufs[i]);}}return 0;
}