今天给大家分享一个截止到目前位置,我遇到最难的一道mysql题目,非常建议大家亲手做一遍
完整代码如下,这道题的主要难点是它有两个外键,以前没遇到过,我也没当回事,分享一下错误经验哈
当时我写的where判断条件是
where Users.banned="No" and(Trips.client_id=Users.users_id or Trips.driver_id=Users.users_id)
当时我就认为和下面代码写的
from Trips as T
inner join Users as U1 on T.client_id=U1.users_id
inner join Users as U2 on T.driver_id=U2.users_id
where U1.banned="No" and U2.banned="No"一样
我觉得系统应该会在我的系统应该像循环一样再判断完Trips.client_id=Users.users_id or 后,帮我分别判断一下
Trips.client_id=Users.users_id的时候Users.banned="No"?
Trips.driver_id=Users.users_id的时候Users.banned="No"?
结果并不会,给大家看一些官方题解,其中就介绍了这个问题
反正我是狠狠的跳进了这个设计好的坑里,一直爬不出来,知道看了题解,这个题目我觉得很好,以后我希望我会经常拿出来看看。
select T2.request_at as "Day",ifnull(round(T1.c/T2.c,2),0) as "Cancellation Rate"
from (select T.request_at,ifnull(count(*),0) as c
from Trips as T
inner join Users as U1 on T.client_id=U1.users_id
inner join Users as U2 on T.driver_id=U2.users_id
where U1.banned="No" and U2.banned="No"
group by T.request_at) as T2 left join
(select T.request_at,ifnull(count(*),0) as c
from Trips as T
inner join Users as U1 on T.client_id=U1.users_id
inner join Users as U2 on T.driver_id=U2.users_id
where U1.banned="No" and U2.banned="No" and T.status Like "ca%"
group by T.request_at) as T1 on T1.request_at=T2.request_at;