bash: unzip: 未找到命令,sudo: nano：找不到命令

在 Ubuntu/Debian 系统上
打开终端并运行以下命令：

sudo apt update
sudo apt install unzip

在 CentOS/RHEL 系统上
打开终端并运行以下命令：

sudo yum install unzip

在 macOS 上
如果您使用的是 macOS，可以使用 Homebrew 安装 unzip（通常 macOS 默认已安装）：

brew install unzip

在 Windows 上
如果您在使用 Windows 的 WSL（Windows Subsystem for Linux），可以按照上述步骤安装。在 Windows 中，您可以使用文件资源管理器右键点击 ZIP 文件并选择“解压缩”选项。

安装完成后
安装完成后，您可以再次尝试解压文件

后续问题

[root@master01 www]# sudo yum install unzip
已加载插件：fastestmirror
Determining fastest mirrors
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; 未知的错误"One of the configured repositories failed (未知),and yum doesn't have enough cached data to continue. At this point the onlysafe thing yum can do is fail. There are a few ways to work "fix" this:1. Contact the upstream for the repository and get them to fix the problem.2. Reconfigure the baseurl/etc. for the repository, to point to a workingupstream. This is most often useful if you are using a newerdistribution release than is supported by the repository (and thepackages for the previous distribution release still work).3. Run the command with the repository temporarily disabledyum --disablerepo=<repoid> ...4. Disable the repository permanently, so yum won't use it by default. Yumwill then just ignore the repository until you permanently enable itagain or use --enablerepo for temporary usage:yum-config-manager --disable <repoid>orsubscription-manager repos --disable=<repoid>5. Configure the failing repository to be skipped, if it is unavailable.Note that yum will try to contact the repo. when it runs most commands,so will have to try and fail each time (and thus. yum will be be muchslower). If it is a very temporary problem though, this is often a nicecompromise:yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=trueCannot find a valid baseurl for repo: base/7/x86_64

更换 YUM 源
如果问题仍然存在，您可以考虑更换 YUM 源。以下是更换为阿里云的 YUM 源的步骤：

备份原有的 YUM 源配置：

sudo cp /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.bak

编辑 YUM 源配置文件：

sudo nano /etc/yum.repos.d/CentOS-Base.repo

将以下内容替换到文件中：

[base]
name=CentOS-$releasever - Base
baseurl=http://mirrors.aliyun.com/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centos7[updates]
name=CentOS-$releasever - Updates
baseurl=http://mirrors.aliyun.com/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centos7[extras]
name=CentOS-$releasever - Extras
baseurl=http://mirrors.aliyun.com/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centos7
保存并退出，然后运行以下命令以清除缓存并更新：
sudo yum clean all
sudo yum makecache