keepalived+HAProxy+MySQL双主实验

环境准备

node1(HAProxy1):192.168.184.10
node2(HAProxy2):192.168.184.20
node3(MySQL1):192.168.184.30
node4(MySQL2):192.168.184.40
虚拟IP vip：192.168.184.100

MySQL部署

在node3执行以下脚本：
#!/bin/bash
systemctl stop firewalld
setenforce 0
yum install mariadb-server -y
sed -i '/^\[mysqld\]$/a\binlog-ignore = information_schema' /etc/my.cnf.d/server.cnf
sed -i '/^\[mysqld\]$/a\binlog-ignore = mysql' /etc/my.cnf.d/server.cnf
sed -i '/^\[mysqld\]$/a\skip-name-resolve' /etc/my.cnf.d/server.cnf
sed -i '/^\[mysqld\]$/a\auto-increment-increment = 1' /etc/my.cnf.d/server.cnf # 注意node4节点上必须不同
sed -i '/^\[mysqld\]$/a\log-bin = mysql-bin' /etc/my.cnf.d/server.cnf
sed -i '/^\[mysqld\]$/a\auto_increment_offset = 1' /etc/my.cnf.d/server.cnf # 注意node4节点上必须不同
sed -i '/^\[mysqld\]$/a\server-id = 1' /etc/my.cnf.d/server.cnf # 注意node4节点上必须不同
systemctl restart mariadb
mysql -uroot -e "grant replication slave on *.* to repuser@'192.168.184.30' identified by '000000';"

在node4执行以下脚本：
#!/bin/bash
systemctl stop firewalld
setenforce 0
yum install mariadb-server -y
sed -i '/^\[mysqld\]$/a\binlog-ignore = information_schema' /etc/my.cnf.d/server.cnf
sed -i '/^\[mysqld\]$/a\binlog-ignore = mysql' /etc/my.cnf.d/server.cnf
sed -i '/^\[mysqld\]$/a\skip-name-resolve' /etc/my.cnf.d/server.cnf
sed -i '/^\[mysqld\]$/a\auto-increment-increment = 2' /etc/my.cnf.d/server.cnf
sed -i '/^\[mysqld\]$/a\log-bin = mysql-bin' /etc/my.cnf.d/server.cnf
sed -i '/^\[mysqld\]$/a\auto_increment_offset = 2' /etc/my.cnf.d/server.cnf 
sed -i '/^\[mysqld\]$/a\server-id = 2' /etc/my.cnf.d/server.cnf 
systemctl restart mariadb
mysql -uroot -e "grant replication slave on *.* to repuser@'192.168.184.30' identified by '000000';"

查询node3节点master状态：
MariaDB [(none)]> show master status;
+------------------+----------+--------------+--------------------------+
|       File       | Position | Binlog_Do_DB |      Binlog_Ignore_DB    |
+------------------+----------+--------------+--------------------------+
| mysql-bin.000001 |   401    |              | mysql,information_schema |
+------------------+----------+--------------+--------------------------+

查询node4节点master状态
MariaDB [(none)]> show master status;
+------------------+----------+--------------+--------------------------+
|       File       | Position | Binlog_Do_DB |     Binlog_Ignore_DB     |
+------------------+----------+--------------+--------------------------+
| mysql-bin.000001 |    245   |              | mysql,information_schema |
+------------------+----------+--------------+--------------------------+

在node3节点执行连接命令：
MariaDB [(none)]> change master to master_host="192.168.184.40",master_port=3306,master_user="repuser",master_password="000000",master_log_file="mysql-bin.000001",master_log_pos=245;
MariaDB [mysql]> start slave;

在node4节点执行连接命令：
MariaDB [(none)]> change master to master_host="192.168.184.30",master_port=3306,master_user="repuser",master_password="000000",master_log_file="mysql-bin.000001",master_log_pos=401;
MariaDB [mysql]> start slave;

查看从节点状态： show slave status \G; 观察IO和SQL线程是否为YES
MariaDB [(none)]> show slave status \G;Slave_IO_Running: YesSlave_SQL_Running: Yes

测试：
1.在node3上创建db1数据库，在node4上查看是否有db1
2.在node4上创建db2数据库，在node3上查看是否有db2
3.最终要实现node3和node4上保持数据同步

在这里插入图片描述

HAProxy部署

在node1和node2上执行以下脚本：
#!/bin/bash
yum install haproxy ‐y
mv /etc/haproxy/haproxy.cfg{,.bak}
cat > /etc/haproxy/haproxy.cfg << EOF
globallog 127.0.0.1 local2chroot /var/lib/haproxypidfile /var/run/haproxy.pidmaxconn 4000user haproxygroup haproxydaemonstats socket /var/lib/haproxy/stats
listen mysql_proxybind 0.0.0.0:3306mode tcpbalance sourceserver mysqldb1 192.168.184.30:3306 weight 1 checkserver mysqldb2 192.168.184.40:3306 weight 2 check
listen statsmode httpbind 0.0.0.0:8080stats enablestats uri /dbsstats realm haproxy\ statisticsstats auth admin:admin
EOF
systemctl start haproxy

keepalived部署

node1上执行以下脚本：
#!/bin/bash
yum install keepalived ‐y
mv /etc/keepalived/keepalived.conf{,.bak}
cat > /etc/keepalived/keepalived.conf << EOF
! Configuration File for keepalived
global_defs {router_id node1
}
vrrp_script chk_http_port {script "/usr/local/src/check_proxy_pid.sh"interval 1weight ‐2
}
vrrp_instance VI_1 {state MASTERinterface ens33virtual_router_id 10priority 100advert_int 1authentication {auth_type PASSauth_pass 1111}track_script {chk_http_port}virtual_ipaddress {192.168.184.100}
}
EOF
systemctl start keepalived
node2上执行以下脚本：
#!/bin/bash
yum install keepalived ‐y
mv /etc/keepalived/keepalived.conf{,.bak}
cat > /etc/keepalived/keepalived.conf << EOF
! Configuration File for keepalived
global_defs {router_id node2
}
vrrp_instance VI_1 {state MASTERinterface ens33virtual_router_id 10priority 99advert_int 1authentication {auth_type PASSauth_pass 1111}virtual_ipaddress {192.168.10.100}
}
EOF
systemctl start keepalived
[root@node1 src]# cat check_proxy_pid.sh
#!/bin/bash
A=`ps -C haproxy --no-header | wc -l`
if [ $A -eq 0 ];then
exit 1
else
exit 0
fi