【rust/树莓派】使用rppalembedded-graphics控制st7789 LCD屏幕

说在前面

树莓派版本：4b
LCD模块：ST7789V2 240*280 LCD
树莓派系统：Linux raspberrypi 5.15.76-v8+ #1597 SMP aarch64 GNU/Linux
rust版本：rustc 1.73.0

模块详情

某雪的1.69inch LCD模块，包含杜邦线

准备工作

树莓派相关见上篇文章
安装rust
这里直接在树莓派系统上安装的rust，未使用交叉编译等手段。

开始

相关依赖包

[dependencies]
rppal = { version = "0.15.0", features = ["hal"] }
embedded-graphics = { version = "0.8.1", features = ["defmt"]}
display-interface-spi = "0.4.1"
mipidsi = "0.7.1"

代码

use display_interface_spi::SPIInterfaceNoCS;
use embedded_graphics::mono_font::ascii::FONT_10X20;
use embedded_graphics::mono_font::MonoTextStyle;
use embedded_graphics::pixelcolor::Rgb565;
use embedded_graphics::prelude::{Point, RgbColor, DrawTarget};
use embedded_graphics::text::Text;
use embedded_graphics::Drawable;
use mipidsi::Builder;
use rppal::gpio::Gpio;
use rppal::spi::Spi;
use std::process::ExitCode;fn main() -> ExitCode {// GPIOlet gpio = Gpio::new().unwrap();// resetlet rst = gpio.get(27).unwrap().into_output();// backlightlet mut backlight = gpio.get(18).unwrap().into_output();// data/commendlet dc = gpio.get(25).unwrap().into_output();// spilet spi = Spi::new(rppal::spi::Bus::Spi0,rppal::spi::SlaveSelect::Ss0,60_000_000,rppal::spi::Mode::Mode0,).unwrap();let di = SPIInterfaceNoCS::new(spi, dc);let mut delay = rppal::hal::Delay::new();let mut display = Builder::st7789(di).with_display_size(240, 280).with_orientation(mipidsi::Orientation::Landscape(true)).with_invert_colors(mipidsi::ColorInversion::Inverted).init(&mut delay, Some(rst)).unwrap();// Textlet char_w = 10;let text = "Hello World ^_^;";let mut text_x = 120;let text_y = 280 / 2;let text_style = MonoTextStyle::new(&FONT_10X20, Rgb565::WHITE);// Alternating colorlet colors = [Rgb565::RED, Rgb565::GREEN, Rgb565::BLUE];// Clear the display initiallydisplay.clear(colors[0]).unwrap();// Turn on backlightbacklight.set_high();let mut last = std::time::Instant::now();let mut counter = 0;loop {let elapsed = last.elapsed().as_secs_f64();if elapsed < 0.00125 {continue;}last = std::time::Instant::now();counter += 1;// Fill the display with alternating colors every 8 framesdisplay.clear(colors[(counter / 8) % colors.len()]).unwrap();// Draw textlet right = Text::new(text, Point::new(text_x, text_y), text_style).draw(&mut display).unwrap();text_x = if right.x <= 0 { 240 } else { text_x - char_w };}// Turn off backlight and clear the displaybacklight.set_low();display.clear(Rgb565::BLACK).unwrap();ExitCode::SUCCESS
}