基于RTOS的STM32游戏机

1.游戏机的主要功能

所有游戏都来着B站JL单片机博主开源

这款游戏机具备存档与继续游戏功能，允许玩家在任何时候退出当前游戏并保存进度，以便日后随时并继续之前的冒险。不仅如此，游戏机还支持多任务处理，玩家可以在退出当前游戏后，无缝切换至其他游戏进行娱乐，而当再次回到之前的游戏时，进度将完好无损，确保游戏体验的连续性和完整性。

除了游戏功能外，这款游戏机还内置了视频播放功能。特别值得一提的是，游戏机内置了一段蔡徐坤打篮球的精彩视频，让玩家在享受游戏乐趣的同时，也能欣赏到偶像的风采。

在游戏内容方面，这款游戏机配备了6款精心挑选的游戏，涵盖了多种类型和风格。

有谷歌小恐龙游戏，贪吃蛇，2048，飞翔的小鸟，飞机大战，俄罗斯方块。

还拥有一个可以查询各个游戏状态的任务。

2.需要的硬件

材料数量
stm32c8t6最小系统板1
按键2
摇杆2
OLED屏幕1

3.游戏机原理

基于RTOS系统创建一个菜单函数的任务，然后通过摇杆选择自己需要玩的游戏，再按下按键，

系统查询有没有创建该游戏任务，如果有就继续该任务，如果没有就参加一个新的任务。

进入游戏可以想退出时可以选择保存存档退出和直接退出返回到任务函数重新选择。菜单页面选择查询任务状态可以查看到那个游戏有存档，那个游戏没有存档。

4.实现代码

摇杆和按键的底层代码

#include "stm32f10x.h" // Device header
#include "key.h"
#include "delay.h"
uint8_t Key_KeyNumber;
//**定时器扫描按键**//
//采样次数
#define SAMPLES         30
int xw,yw,xw2,yw2;
void Joystick_Init(void)
{//开始GPIOB的时钟RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);//将LDR引脚设为模拟输入GPIO_InitTypeDef GPIO_InitStructure;GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_3;GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;GPIO_Init(GPIOA, &GPIO_InitStructure);
}/******************************************************************* 函 数 名 称：ADC_Joystick_Init* 函 数 说 明：初始化ADC功能* 函 数 形 参：无* 函 数 返 回：无* 作       者：LC* 备       注：无
******************************************************************/void ADC_Joystick_Init(void)
{Joystick_Init();//开启ADC时钟RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);//ADC频率进行6分频RCC_ADCCLKConfig(RCC_PCLK2_Div6);//配置ADC结构体ADC_InitTypeDef ADC_InitStructure;ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;	//独立模式ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;	//数据右对齐ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;	//软件触发ADC_InitStructure.ADC_ContinuousConvMode = DISABLE;	//单次转换ADC_InitStructure.ADC_ScanConvMode = DISABLE;	//非扫描模式ADC_InitStructure.ADC_NbrOfChannel = 1;	//总通道数ADC_Init(ADC1, &ADC_InitStructure);	//初始化ADC1//开启ADC1ADC_Cmd(ADC1, ENABLE);//进行ADC校准ADC_ResetCalibration(ADC1);while(ADC_GetResetCalibrationStatus(ADC1) == SET);ADC_StartCalibration(ADC1);while(ADC_GetCalibrationStatus(ADC1) == SET);	
}/******************************************************************* 函 数 名 称：Get_Adc_Joystick_Value* 函 数 说 明：对DMA保存的数据进行平均值计算后输出* 函 数 形 参：CHx 第几个扫描的数据* 函 数 返 回：对应扫描的ADC值* 作       者：LC* 备       注：无
******************************************************************/
unsigned int Get_Adc_Joystick_Value(char CHx)
{uint32_t Data = 0;//设置采集通道ADC_RegularChannelConfig( ADC1, CHx, 1, ADC_SampleTime_55Cycles5 );//开始软件转换ADC_SoftwareStartConvCmd(ADC1,ENABLE);while(!ADC_GetFlagStatus(ADC1, ADC_FLAG_EOC )); // 等待转换结束for(int i = 0; i < SAMPLES; i++){Data += ADC_GetConversionValue(ADC1);//  Delay_ms(2);}Data = Data / SAMPLES;return Data;
}/******************************************************************* 函 数 名 称：Get_MQ2_Percentage_value* 函 数 说 明：读取摇杆值，并且返回百分比* 函 数 形 参：0=读取摇杆左右值，1=读取摇杆上下值* 函 数 返 回：返回百分比* 作       者：LC* 备       注：无
******************************************************************/
unsigned int Get_Joystick_Percentage_value(char dir)
{int adc_new = 0;int Percentage_value = 0;if( dir == 0){adc_new = Get_Adc_Joystick_Value(ADC_Channel_0);}else{adc_new = Get_Adc_Joystick_Value(ADC_Channel_1);}Percentage_value = ((float)adc_new/4095.0f) * 100.f;return Percentage_value;
}
unsigned int Get_Joystick2_Percentage_value(char dir)
{int adc_new = 0;int Percentage_value = 0;if( dir == 0){adc_new = Get_Adc_Joystick_Value(ADC_Channel_2);}else{adc_new = Get_Adc_Joystick_Value(ADC_Channel_3);}Percentage_value = ((float)adc_new/4095.0f) * 100.f;return Percentage_value;
}
void GPIO_KeyInit(void) // 初始化GPIO
{GPIO_InitTypeDef GPIO_InitStructure;GPIO_InitTypeDef GPIO_InitStructure3;RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;GPIO_InitStructure.GPIO_Pin = key_r_push_pin| key_l_push_pin;GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;GPIO_Init(key_r_back_and_push_port, &GPIO_InitStructure);GPIO_InitStructure3.GPIO_Mode = GPIO_Mode_IPU;GPIO_InitStructure3.GPIO_Pin = sw1_pin | sw2_pin;GPIO_InitStructure3.GPIO_Speed = GPIO_Speed_50MHz;GPIO_Init(sw_port, &GPIO_InitStructure3);
}void Timer_Init(void) // 初始化定时器
{TIM_TimeBaseInitTypeDef TimeBaseInitStructure;NVIC_InitTypeDef NVIC_InitStructure;RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);TIM_InternalClockConfig(TIM2);TimeBaseInitStructure.TIM_ClockDivision = TIM_CKD_DIV1;TimeBaseInitStructure.TIM_CounterMode = TIM_CounterMode_Up;TimeBaseInitStructure.TIM_Period = 300 - 1;TimeBaseInitStructure.TIM_Prescaler = 7200 - 1;TimeBaseInitStructure.TIM_RepetitionCounter = 0;TIM_TimeBaseInit(TIM2, &TimeBaseInitStructure);TIM_ClearFlag(TIM2, TIM_FLAG_Update);TIM_ITConfig(TIM2, TIM_IT_Update, ENABLE);NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);NVIC_InitStructure.NVIC_IRQChannel = TIM2_IRQn;NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;NVIC_Init(&NVIC_InitStructure);TIM_Cmd(TIM2, ENABLE);
}uint8_t Key(void) // 获取按键值
{uint8_t Temp;Temp = Key_KeyNumber;Key_KeyNumber = 0;return Temp;
}uint8_t Get_Key(void) // 获取电平变化
{uint8_t KeyNum = 0;if((xw<30))    KeyNum = r_front_key_value;if((xw>70))    KeyNum = r_back_key_value;if((yw>70))    KeyNum = r_right_key_value;if((yw<30))    KeyNum = r_left_key_value;if((xw2<30))  KeyNum =l_front_key_value;if((xw2>70))  KeyNum=l_back_key_value;if((yw2>70))  KeyNum=l_right_key_value;if((yw2<30))  KeyNum=l_left_key_value;if (GPIO_ReadInputDataBit(key_r_back_and_push_port, key_r_push_pin) == 0){KeyNum = r_push_key_value;}if (GPIO_ReadInputDataBit(key_r_back_and_push_port, key_l_push_pin) == 0){KeyNum = l_push_key_value;}if (GPIO_ReadInputDataBit(sw_port, sw1_pin) == 0){KeyNum = sw1_key_value;}if (GPIO_ReadInputDataBit(sw_port, sw2_pin) == 0){KeyNum = sw2_key_value;}return KeyNum;
}void Loop_Key(void) // 扫描按键
{static uint8_t LastKey = 0, NowKey = 0;LastKey = NowKey;NowKey = Get_Key();if (LastKey == r_front_key_value && NowKey == 0){Key_KeyNumber = r_front_key_value;}if (LastKey == r_back_key_value && NowKey == 0){Key_KeyNumber = r_back_key_value;}if (LastKey == r_left_key_value && NowKey == 0){Key_KeyNumber = r_left_key_value;}if (LastKey == r_right_key_value && NowKey == 0){Key_KeyNumber = r_right_key_value;}if (LastKey == r_push_key_value && NowKey == 0){Key_KeyNumber = r_push_key_value;}if (LastKey == l_front_key_value && NowKey == 0){Key_KeyNumber = l_front_key_value;}if (LastKey == l_back_key_value && NowKey == 0){Key_KeyNumber = l_back_key_value;}if (LastKey == l_left_key_value && NowKey == 0){Key_KeyNumber = l_left_key_value;}if (LastKey == l_right_key_value && NowKey == 0){Key_KeyNumber = l_right_key_value;}if (LastKey == l_push_key_value && NowKey == 0){Key_KeyNumber = l_push_key_value;}if (LastKey == sw1_key_value && NowKey == 0){Key_KeyNumber = sw1_key_value;}if (LastKey == sw2_key_value && NowKey == 0){Key_KeyNumber = sw2_key_value;}}void Key_Init(void) // 按键初始化
{GPIO_KeyInit();Timer_Init();ADC_Joystick_Init();
}void TIM2_IRQHandler(void) // 定时器扫描（30ms）
{if (TIM_GetITStatus(TIM2, TIM_IT_Update) == 1){xw=Get_Joystick_Percentage_value(0);yw=Get_Joystick_Percentage_value(1);xw2=Get_Joystick2_Percentage_value(0);yw2=Get_Joystick2_Percentage_value(1);Loop_Key();TIM_ClearITPendingBit(TIM2, TIM_IT_Update);}
}

菜单任务逻辑

int menu(void)
{while (1){//查询是否创建该任务vTaskGetInfo(game1_Handler, &game1_state, pdTRUE, eInvalid);vTaskGetInfo(game2_Handler, &game2_state, pdTRUE, eInvalid);vTaskGetInfo(game3_Handler, &game3_state, pdTRUE, eInvalid);vTaskGetInfo(game4_Handler, &game4_state, pdTRUE, eInvalid);vTaskGetInfo(game5_Handler, &game5_state, pdTRUE, eInvalid);vTaskGetInfo(game6_Handler, &game6_state, pdTRUE, eInvalid);vTaskGetInfo(game7_Handler, &game7_state, pdTRUE, eInvalid);vTaskGetInfo(  info_Handler, &info_state, pdTRUE, eInvalid);vTaskGetInfo(Video_Handler, &info_state, pdTRUE, eInvalid);B_OLED_Clear();//显示ui界面if(select<6){B_OLED_ShowString(14, 20, "1", B_OLED_8X16);B_OLED_ShowString(14 + (length_x + distance_x) * 1, 20, "2", B_OLED_8X16);B_OLED_ShowString(14 + (length_x + distance_x) * 2, 20, "3", B_OLED_8X16);B_OLED_ShowString(14 + (length_x + distance_x) * 3, 20, "4", B_OLED_8X16);B_OLED_ShowString(35, 50, "freeRTOS", B_OLED_6X8);B_OLED_DrawRectangle(distance_x, distance_y, length_x, length_y, B_OLED_UNFILLED);B_OLED_DrawRectangle(distance_x + length_x + distance_x, distance_y, length_x, length_y, B_OLED_UNFILLED);B_OLED_DrawRectangle(distance_x + (length_x + distance_x) * 2, distance_y, length_x, length_y, B_OLED_UNFILLED);B_OLED_DrawRectangle(distance_x + (length_x + distance_x) * 3, distance_y, length_x, length_y, B_OLED_UNFILLED);B_OLED_DrawRectangle(distance_x, length_y + distance_y2 + distance_y, length_x + (distance_x + length_x) * 3, length_y2, B_OLED_UNFILLED);if (select == 1){sprintf(text_menu, "Menu:dragon");B_OLED_ReverseArea(distance_x, distance_y, length_x, length_y);}else if (select == 2){sprintf(text_menu, "Menu:war");B_OLED_ReverseArea(distance_x + length_x + distance_x, distance_y, length_x, length_y);}else if (select == 3){sprintf(text_menu, "Menu:bird");B_OLED_ReverseArea(distance_x + (length_x + distance_x) * 2, distance_y, length_x, length_y);}else if (select == 4){sprintf(text_menu, "Menu:block");B_OLED_ReverseArea(distance_x + (length_x + distance_x) * 3, distance_y, length_x, length_y);}else if (select == 5){sprintf(text_menu, "Menu:info");B_OLED_ReverseArea(distance_x, length_y + distance_y2 + distance_y, length_x + (distance_x + length_x) * 3, length_y2);}	}if(select>=6){B_OLED_ShowString(14, 20, "6", B_OLED_8X16);B_OLED_ShowString(14 + (length_x + distance_x) * 1, 20, "7", B_OLED_8X16);B_OLED_ShowString(14 + (length_x + distance_x) * 2, 20, "8", B_OLED_8X16);B_OLED_ShowString(14 + (length_x + distance_x) * 3, 20, "9", B_OLED_8X16);B_OLED_ShowString(35, 50, "freeRTOS", B_OLED_6X8);B_OLED_DrawRectangle(distance_x, distance_y, length_x, length_y, B_OLED_UNFILLED);B_OLED_DrawRectangle(distance_x + length_x + distance_x, distance_y, length_x, length_y, B_OLED_UNFILLED);B_OLED_DrawRectangle(distance_x + (length_x + distance_x) * 2, distance_y, length_x, length_y, B_OLED_UNFILLED);B_OLED_DrawRectangle(distance_x + (length_x + distance_x) * 3, distance_y, length_x, length_y, B_OLED_UNFILLED);B_OLED_DrawRectangle(distance_x, length_y + distance_y2 + distance_y, length_x + (distance_x + length_x) * 3, length_y2, B_OLED_UNFILLED);if (select == 6)     B_OLED_ReverseArea(distance_x, distance_y, length_x, length_y),sprintf(text_menu, "Menu:Snake");if (select == 7)     B_OLED_ReverseArea(distance_x + length_x + distance_x, distance_y, length_x, length_y),sprintf(text_menu, "Menu:Video");if (select == 8)     B_OLED_ReverseArea(distance_x + (length_x + distance_x) * 2, distance_y, length_x, length_y),sprintf(text_menu, "Menu:2048");if (select == 9)     B_OLED_ReverseArea(distance_x + (length_x + distance_x) * 3, distance_y, length_x, length_y),sprintf(text_menu, "Menu:no");if (select == 10)    B_OLED_ReverseArea(distance_x, length_y + distance_y2 + distance_y, length_x + (distance_x + length_x) * 3, length_y2),sprintf(text_menu, "Menu:info");;}//判断改任务是否存在存在上面显示runif ((game1_state.eCurrentState == eRunning) || (game1_state.eCurrentState == eSuspended)){B_OLED_DrawCircle(15 + offset_state_x, 20 + offset_state_y, 2, B_OLED_UNFILLED);if (select == 1)B_OLED_ShowString(110, 0, "run", B_OLED_6X8);}if ((game2_state.eCurrentState == eRunning) || (game2_state.eCurrentState == eSuspended)){B_OLED_DrawCircle(15 + (length_x + distance_x) * 1 + offset_state_x, 20 + offset_state_y, 2, B_OLED_UNFILLED);if (select == 2)B_OLED_ShowString(110, 0, "run", B_OLED_6X8);}if ((game3_state.eCurrentState == eRunning) || (game3_state.eCurrentState == eSuspended)){B_OLED_DrawCircle(15 + (length_x + distance_x) * 2 + offset_state_x, 20 + offset_state_y, 2, B_OLED_UNFILLED);if (select == 3)B_OLED_ShowString(110, 0, "run", B_OLED_6X8);}if ((game4_state.eCurrentState == eRunning) || (game4_state.eCurrentState == eSuspended)){B_OLED_DrawCircle(15 + (length_x + distance_x) * 3 + offset_state_x, 20 + offset_state_y, 2, B_OLED_UNFILLED);if (select == 4)B_OLED_ShowString(110, 0, "run", B_OLED_6X8);}if ((game5_state.eCurrentState == eRunning) || (game5_state.eCurrentState == eSuspended)){B_OLED_DrawCircle(15 + offset_state_x, 20 + offset_state_y, 2, B_OLED_UNFILLED);if (select == 6)B_OLED_ShowString(110, 0, "run", B_OLED_6X8);}if ((game6_state.eCurrentState == eRunning) || (game6_state.eCurrentState == eSuspended)){B_OLED_DrawCircle(15 + offset_state_x, 20 + offset_state_y, 2, B_OLED_UNFILLED);if (select == 8)B_OLED_ShowString(110, 0, "run", B_OLED_6X8);}if ((game7_state.eCurrentState == eRunning) || (game7_state.eCurrentState == eSuspended)){B_OLED_DrawCircle(15 + offset_state_x, 20 + offset_state_y, 2, B_OLED_UNFILLED);if (select == 9)B_OLED_ShowString(110, 0, "run", B_OLED_6X8);}if ((info_state.eCurrentState == eRunning) || (info_state.eCurrentState == eSuspended)){B_OLED_DrawCircle(35 + offset_state_x2, 50 + offset_state_y2, 2, B_OLED_UNFILLED);if (select == 5||select == 10)B_OLED_ShowString(110, 0, "run", B_OLED_6X8);}if ((Video_state.eCurrentState == eRunning) || (Video_state.eCurrentState == eSuspended)){B_OLED_DrawCircle(35 + offset_state_x2, 50 + offset_state_y2, 2, B_OLED_UNFILLED);if (select == 7)B_OLED_ShowString(110, 0, "run", B_OLED_6X8);}B_OLED_ShowString(0, 0, text_menu, B_OLED_8X16);menu_key_num = Get_Key();if (menu_key_num != 0){if ((menu_key_num == r_push_key_value) || (menu_key_num == l_push_key_value)){return select;}switch (menu_key_num){case r_right_key_value:select++;break;case r_left_key_value:select--;break;case r_back_key_value:select += 4;break;case r_front_key_value:select -= 4;case l_right_key_value:select++;break;case l_left_key_value:select--;break;case l_back_key_value:select += 4;break;case l_front_key_value:select -= 4;default:break;}if (select > 10)select = 10;if (select < 1)select = 1;while (menu_key_num != 0){menu_key_num = Get_Key();}}B_OLED_Update();}
}

游戏任务逻辑

void startup()
{init();while(1){B_OLED_Clear();FrameLoop();
//		KeyLoop();GameLoop();B_OLED_Update();if (get_key_status() == sw1_key_value){vTaskResume(menuTask_Handler);vTaskSuspend(game6_Handler);}else if (get_key_status() == sw2_key_value){vTaskResume(menuTask_Handler);vTaskDelete(game6_Handler);}}}

查询任务状态和存档状态

int infos(){B_OLED_Clear();vTaskGetInfo(game1_Handler, &game1_state, pdTRUE, eInvalid);vTaskGetInfo(game2_Handler, &game2_state, pdTRUE, eInvalid);vTaskGetInfo(game3_Handler, &game3_state, pdTRUE, eInvalid);vTaskGetInfo(game4_Handler, &game4_state, pdTRUE, eInvalid);vTaskGetInfo(game1_Handler, &game5_state, pdTRUE, eInvalid);vTaskGetInfo(game2_Handler, &game6_state, pdTRUE, eInvalid);vTaskGetInfo(game3_Handler, &game7_state, pdTRUE, eInvalid);vTaskGetInfo(game4_Handler, &Video_state, pdTRUE, eInvalid);B_OLED_ShowString(0, 0, "game1", B_OLED_6X8);switch (game1_state.eCurrentState){case eRunning:B_OLED_ShowString(0, text_height+1, "eRunning", B_OLED_6X8);break;case eReady:B_OLED_ShowString(0, text_height + 1, "eReady", B_OLED_6X8);break;case eBlocked:B_OLED_ShowString(0, text_height + 1, "eBlocked", B_OLED_6X8);break;case eSuspended:B_OLED_ShowString(0, text_height + 1, "eSuspended", B_OLED_6X8);break;case eDeleted:B_OLED_ShowString(0, text_height + 1, "eDeleted", B_OLED_6X8);break;case eInvalid:B_OLED_ShowString(0, text_height + 1, "eInvalid", B_OLED_6X8);break;default:break;}sprintf(text, "pro:%1d", game1_state.uxBasePriority);B_OLED_ShowString(0, 2 * text_height + 1, text, B_OLED_6X8);// sprintf(text, "stack:%1d", game1_state.usStackHighWaterMark);// B_OLED_ShowString(0, 3 * text_height + 1, text, B_OLED_6X8);B_OLED_ShowString(0, 4 * text_height + 1, "game2", B_OLED_6X8);switch (game2_state.eCurrentState){case eRunning:B_OLED_ShowString(0, 5 * text_height + 1, "eRunning", B_OLED_6X8);break;case eReady:B_OLED_ShowString(0, 5 * text_height + 1, "eReady", B_OLED_6X8);break;case eBlocked:B_OLED_ShowString(0, 5 * text_height + 1, "eBlocked", B_OLED_6X8);break;case eSuspended:B_OLED_ShowString(0, 5 * text_height + 1, "eSuspended", B_OLED_6X8);break;case eDeleted:B_OLED_ShowString(0, 5 * text_height + 1, "eDeleted", B_OLED_6X8);break;case eInvalid:B_OLED_ShowString(0, 5 * text_height + 1, "eInvalid", B_OLED_6X8);break;default:break;}sprintf(text, "pro:%1d", game2_state.uxBasePriority);B_OLED_ShowString(0, 6 * text_height + 1, text, B_OLED_6X8);// sprintf(text, "stack:%1d", game2_state.usStackHighWaterMark);// B_OLED_ShowString(0, 7 * text_height + 1, text, B_OLED_6X8);B_OLED_ShowString(half, 0, "game3", B_OLED_6X8);switch (game3_state.eCurrentState){case eRunning:B_OLED_ShowString(half, text_height + 1, "eRunning", B_OLED_6X8);break;case eReady:B_OLED_ShowString(half, text_height + 1, "eReady", B_OLED_6X8);break;case eBlocked:B_OLED_ShowString(half, text_height + 1, "eBlocked", B_OLED_6X8);break;case eSuspended:B_OLED_ShowString(half, text_height + 1, "eSuspended", B_OLED_6X8);break;case eDeleted:B_OLED_ShowString(half, text_height + 1, "eDeleted", B_OLED_6X8);break;case eInvalid:B_OLED_ShowString(half, text_height + 1, "eInvalid", B_OLED_6X8);break;default:break;}sprintf(text, "pro:%1d", game3_state.uxBasePriority);B_OLED_ShowString(half, 2 * text_height + 1, text, B_OLED_6X8);// sprintf(text, "stack:%1d", game3_state.usStackHighWaterMark);// B_OLED_ShowString(half, 3 * text_height + 1, text, B_OLED_6X8);B_OLED_ShowString(half, 4 * text_height + 1, "game4", B_OLED_6X8);switch (game4_state.eCurrentState){case eRunning:B_OLED_ShowString(half, 5 * text_height + 1, "eRunning", B_OLED_6X8);break;case eReady:B_OLED_ShowString(half, 5 * text_height + 1, "eReady", B_OLED_6X8);break;case eBlocked:B_OLED_ShowString(half, 5 * text_height + 1, "eBlocked", B_OLED_6X8);break;case eSuspended:B_OLED_ShowString(half, 5 * text_height + 1, "eSuspended", B_OLED_6X8);break;case eDeleted:B_OLED_ShowString(half, 5 * text_height + 1, "eDeleted", B_OLED_6X8);break;case eInvalid:B_OLED_ShowString(half, 5 * text_height + 1, "eInvalid", B_OLED_6X8);break;default:break;}sprintf(text, "pro:%1d", game4_state.uxBasePriority);B_OLED_ShowString(half, 6 * text_height + 1, text, B_OLED_6X8);// sprintf(text, "stack:%1d", game4_state.usStackHighWaterMark);// B_OLED_ShowString(half, 7 * text_height + 1, text, B_OLED_6X8);B_OLED_Update();int a=0;while (1){if (((get_key_status() == l_right_key_value)||(get_key_status() ==r_right_key_value))&&(a==0)){ a=1;B_OLED_Clear();B_OLED_ShowString(0, 0, "game5", B_OLED_6X8);switch (game5_state.eCurrentState){case eRunning:B_OLED_ShowString(0, text_height+1, "eRunning", B_OLED_6X8);break;case eReady:B_OLED_ShowString(0, text_height + 1, "eReady", B_OLED_6X8);break;case eBlocked:B_OLED_ShowString(0, text_height + 1, "eBlocked", B_OLED_6X8);break;case eSuspended:B_OLED_ShowString(0, text_height + 1, "eSuspended", B_OLED_6X8);break;case eDeleted:B_OLED_ShowString(0, text_height + 1, "eDeleted", B_OLED_6X8);break;case eInvalid:B_OLED_ShowString(0, text_height + 1, "eInvalid", B_OLED_6X8);break;default:break;}sprintf(text, "pro:%1d", game5_state.uxBasePriority);B_OLED_ShowString(0, 2 * text_height + 1, text, B_OLED_6X8);// sprintf(text, "stack:%1d", game1_state.usStackHighWaterMark);// B_OLED_ShowString(0, 3 * text_height + 1, text, B_OLED_6X8);B_OLED_ShowString(0, 4 * text_height + 1, "game6", B_OLED_6X8);switch (game6_state.eCurrentState){case eRunning:B_OLED_ShowString(0, 5 * text_height + 1, "eRunning", B_OLED_6X8);break;case eReady:B_OLED_ShowString(0, 5 * text_height + 1, "eReady", B_OLED_6X8);break;case eBlocked:B_OLED_ShowString(0, 5 * text_height + 1, "eBlocked", B_OLED_6X8);break;case eSuspended:B_OLED_ShowString(0, 5 * text_height + 1, "eSuspended", B_OLED_6X8);break;case eDeleted:B_OLED_ShowString(0, 5 * text_height + 1, "eDeleted", B_OLED_6X8);break;case eInvalid:B_OLED_ShowString(0, 5 * text_height + 1, "eInvalid", B_OLED_6X8);break;default:break;}sprintf(text, "pro:%1d", game6_state.uxBasePriority);B_OLED_ShowString(0, 6 * text_height + 1, text, B_OLED_6X8);// sprintf(text, "stack:%1d", game2_state.usStackHighWaterMark);// B_OLED_ShowString(0, 7 * text_height + 1, text, B_OLED_6X8);B_OLED_ShowString(half, 0, "game7", B_OLED_6X8);switch (game7_state.eCurrentState){case eRunning:B_OLED_ShowString(half, text_height + 1, "eRunning", B_OLED_6X8);break;case eReady:B_OLED_ShowString(half, text_height + 1, "eReady", B_OLED_6X8);break;case eBlocked:B_OLED_ShowString(half, text_height + 1, "eBlocked", B_OLED_6X8);break;case eSuspended:B_OLED_ShowString(half, text_height + 1, "eSuspended", B_OLED_6X8);break;case eDeleted:B_OLED_ShowString(half, text_height + 1, "eDeleted", B_OLED_6X8);break;case eInvalid:B_OLED_ShowString(half, text_height + 1, "eInvalid", B_OLED_6X8);break;default:break;}sprintf(text, "pro:%1d", game7_state.uxBasePriority);B_OLED_ShowString(half, 2 * text_height + 1, text, B_OLED_6X8);// sprintf(text, "stack:%1d", game3_state.usStackHighWaterMark);// B_OLED_ShowString(half, 3 * text_height + 1, text, B_OLED_6X8);B_OLED_ShowString(half, 4 * text_height + 1, "Video", B_OLED_6X8);switch (Video_state.eCurrentState){case eRunning:B_OLED_ShowString(half, 5 * text_height + 1, "eRunning", B_OLED_6X8);break;case eReady:B_OLED_ShowString(half, 5 * text_height + 1, "eReady", B_OLED_6X8);break;case eBlocked:B_OLED_ShowString(half, 5 * text_height + 1, "eBlocked", B_OLED_6X8);break;case eSuspended:B_OLED_ShowString(half, 5 * text_height + 1, "eSuspended", B_OLED_6X8);break;case eDeleted:B_OLED_ShowString(half, 5 * text_height + 1, "eDeleted", B_OLED_6X8);break;case eInvalid:B_OLED_ShowString(half, 5 * text_height + 1, "eInvalid", B_OLED_6X8);break;default:break;}sprintf(text, "pro:%1d", Video_state.uxBasePriority);B_OLED_ShowString(half, 6 * text_height + 1, text, B_OLED_6X8);// sprintf(text, "stack:%1d", game4_state.usStackHighWaterMark);// B_OLED_ShowString(half, 7 * text_height + 1, text, B_OLED_6X8);B_OLED_Update();}if (((get_key_status() == l_left_key_value)||(get_key_status() ==r_left_key_value))&&(a==1)){a=0;B_OLED_Clear();B_OLED_ShowString(0, 0, "game1", B_OLED_6X8);switch (game1_state.eCurrentState){case eRunning:B_OLED_ShowString(0, text_height+1, "eRunning", B_OLED_6X8);break;case eReady:B_OLED_ShowString(0, text_height + 1, "eReady", B_OLED_6X8);break;case eBlocked:B_OLED_ShowString(0, text_height + 1, "eBlocked", B_OLED_6X8);break;case eSuspended:B_OLED_ShowString(0, text_height + 1, "eSuspended", B_OLED_6X8);break;case eDeleted:B_OLED_ShowString(0, text_height + 1, "eDeleted", B_OLED_6X8);break;case eInvalid:B_OLED_ShowString(0, text_height + 1, "eInvalid", B_OLED_6X8);break;default:break;}sprintf(text, "pro:%1d", game1_state.uxBasePriority);B_OLED_ShowString(0, 2 * text_height + 1, text, B_OLED_6X8);// sprintf(text, "stack:%1d", game1_state.usStackHighWaterMark);// B_OLED_ShowString(0, 3 * text_height + 1, text, B_OLED_6X8);B_OLED_ShowString(0, 4 * text_height + 1, "game2", B_OLED_6X8);switch (game2_state.eCurrentState){case eRunning:B_OLED_ShowString(0, 5 * text_height + 1, "eRunning", B_OLED_6X8);break;case eReady:B_OLED_ShowString(0, 5 * text_height + 1, "eReady", B_OLED_6X8);break;case eBlocked:B_OLED_ShowString(0, 5 * text_height + 1, "eBlocked", B_OLED_6X8);break;case eSuspended:B_OLED_ShowString(0, 5 * text_height + 1, "eSuspended", B_OLED_6X8);break;case eDeleted:B_OLED_ShowString(0, 5 * text_height + 1, "eDeleted", B_OLED_6X8);break;case eInvalid:B_OLED_ShowString(0, 5 * text_height + 1, "eInvalid", B_OLED_6X8);break;default:break;}sprintf(text, "pro:%1d", game2_state.uxBasePriority);B_OLED_ShowString(0, 6 * text_height + 1, text, B_OLED_6X8);// sprintf(text, "stack:%1d", game2_state.usStackHighWaterMark);// B_OLED_ShowString(0, 7 * text_height + 1, text, B_OLED_6X8);B_OLED_ShowString(half, 0, "game3", B_OLED_6X8);switch (game3_state.eCurrentState){case eRunning:B_OLED_ShowString(half, text_height + 1, "eRunning", B_OLED_6X8);break;case eReady:B_OLED_ShowString(half, text_height + 1, "eReady", B_OLED_6X8);break;case eBlocked:B_OLED_ShowString(half, text_height + 1, "eBlocked", B_OLED_6X8);break;case eSuspended:B_OLED_ShowString(half, text_height + 1, "eSuspended", B_OLED_6X8);break;case eDeleted:B_OLED_ShowString(half, text_height + 1, "eDeleted", B_OLED_6X8);break;case eInvalid:B_OLED_ShowString(half, text_height + 1, "eInvalid", B_OLED_6X8);break;default:break;}sprintf(text, "pro:%1d", game3_state.uxBasePriority);B_OLED_ShowString(half, 2 * text_height + 1, text, B_OLED_6X8);// sprintf(text, "stack:%1d", game3_state.usStackHighWaterMark);// B_OLED_ShowString(half, 3 * text_height + 1, text, B_OLED_6X8);B_OLED_ShowString(half, 4 * text_height + 1, "game4", B_OLED_6X8);switch (game4_state.eCurrentState){case eRunning:B_OLED_ShowString(half, 5 * text_height + 1, "eRunning", B_OLED_6X8);break;case eReady:B_OLED_ShowString(half, 5 * text_height + 1, "eReady", B_OLED_6X8);break;case eBlocked:B_OLED_ShowString(half, 5 * text_height + 1, "eBlocked", B_OLED_6X8);break;case eSuspended:B_OLED_ShowString(half, 5 * text_height + 1, "eSuspended", B_OLED_6X8);break;case eDeleted:B_OLED_ShowString(half, 5 * text_height + 1, "eDeleted", B_OLED_6X8);break;case eInvalid:B_OLED_ShowString(half, 5 * text_height + 1, "eInvalid", B_OLED_6X8);break;default:break;}sprintf(text, "pro:%1d", game4_state.uxBasePriority);B_OLED_ShowString(half, 6 * text_height + 1, text, B_OLED_6X8);// sprintf(text, "stack:%1d", game4_state.usStackHighWaterMark);// B_OLED_ShowString(half, 7 * text_height + 1, text, B_OLED_6X8);B_OLED_Update();}if (get_key_status() == sw1_key_value){B_OLED_Clear();B_OLED_Update();vTaskResume(menuTask_Handler);vTaskSuspend(info_Handler);}else if (get_key_status() == sw2_key_value){B_OLED_Clear();B_OLED_Update();vTaskResume(menuTask_Handler);vTaskDelete(info_Handler);}}}

-----------------------欢迎大家指正交流，有空可以一起讨论代码啊。--------------------------------

通过网盘分享的文件：stm32_FreeRTOS_Game-master.zip
链接: https://pan.baidu.com/s/1UAAb-8cHPl7ZP1pRVyJMAA 提取码: qpgg

本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：http://www.mzph.cn/diannao/69018.shtml

如若内容造成侵权/违法违规/事实不符，请联系多彩编程网进行投诉反馈email:809451989@qq.com，一经查实，立即删除！

相关文章

优选算法的灵动之章：双指针专题（一）

优选算法的灵动之章：双指针专题（一）

个人主页&#xff1a;手握风云 专栏&#xff1a;算法 目录 一、双指针算法思想 二、算法题精讲 2.1. 查找总价格为目标值的两个商品 2.2. 盛最多水的容器 ​编辑 2.3. 移动零 2.4. 有效的三角形个数 一、双指针算法思想 双指针算法主要用于处理数组、链表等线性数据结构…
阅读更多...
ROS应用之SwarmSim在ROS 中的协同路径规划

ROS应用之SwarmSim在ROS 中的协同路径规划

SwarmSim 在 ROS 中的协同路径规划 前言 在多机器人系统&#xff08;Multi-Robot Systems, MRS&#xff09;中&#xff0c;SwarmSim 是一个常用的模拟工具&#xff0c;可以对多机器人进行仿真以实现复杂任务的协同。除了任务分配逻辑以外&#xff0c;SwarmSim 在协同路径规划方…
阅读更多...
MVC、MVP和MVVM模式

MVC、MVP和MVVM模式

MVC模式中&#xff0c;视图和模型之间直接交互&#xff0c;而MVP模式下&#xff0c;视图与模型通过Presenter进行通信&#xff0c;MVVM则采用双向绑定&#xff0c;减少手动同步视图和模型的工作。每种模式都有其优缺点&#xff0c;适合不同规模和类型的项目。 ### MVVM 与 MVP…
阅读更多...
【BUUCTF杂项题】后门查杀、webshell后门

【BUUCTF杂项题】后门查杀、webshell后门

前言&#xff1a;Webshell 本质上是一段可在 Web 服务器上执行的脚本代码&#xff0c;通常以文件形式存在于 Web 服务器的网站目录中。黑客通过利用 Web 应用程序的漏洞&#xff0c;如 SQL 注入、文件上传漏洞、命令执行漏洞等&#xff0c;将 Webshell 脚本上传到服务器&#x…
阅读更多...
Spring中@Conditional注解详解：条件装配的终极指南

Spring中@Conditional注解详解：条件装配的终极指南

一、为什么要用条件装配&#xff1f; 在实际开发中&#xff0c;我们经常需要根据不同的运行环境、配置参数或依赖情况动态决定是否注册某个Bean。例如&#xff1a; 开发环境使用内存数据库&#xff0c;生产环境连接真实数据库 当存在某个类时才启用特定功能 根据配置文件开关…
阅读更多...
visual studio安装

visual studio安装

一、下载Visual Studio 访问Visual Studio官方网站。下载 Visual Studio Tools - 免费安装 Windows、Mac、Linux 在主页上找到并点击“下载 Visual Studio”按钮。 选择适合需求的版本&#xff0c;例如“Visual Studio Community”&#xff08;免费版本&#xff09;&#x…
阅读更多...
【C语言深入探索】：指针高级应用与极致技巧（二）

【C语言深入探索】：指针高级应用与极致技巧（二）

目录 一、指针与数组 1.1. 数组指针 1.2. 指向多维数组的指针 1.2.1. 指向多维数组元素的指针 1.2.2. 指向多维数组行的指针 1.3. 动态分配多维数组 1.4. 小结 二、指针与字符串 2.1. 字符串表示 2.2. 字符串处理函数 2.3. 代码示例 2.4. 注意事项 三、指针与文件…
阅读更多...
基于开源AI智能名片2 + 1链动模式S2B2C商城小程序源码在抖音招商加盟中的应用与创新

基于开源AI智能名片2 + 1链动模式S2B2C商城小程序源码在抖音招商加盟中的应用与创新

摘要&#xff1a;本文深入探讨了在短视频蓬勃发展的时代背景下&#xff0c;招商加盟领域借助抖音平台所具备的独特优势。同时&#xff0c;全面剖析开源AI智能名片2 1链动模式S2B2C商城小程序源码这一创新工具&#xff0c;详细阐述其如何与抖音招商加盟深度融合&#xff0c;助力…
阅读更多...
爬虫学习笔记之Robots协议相关整理

爬虫学习笔记之Robots协议相关整理

定义 Robots协议也称作爬虫协议、机器人协议&#xff0c;全名为网络爬虫排除标准&#xff0c;用来告诉爬虫和搜索引擎哪些页面可以爬取、哪些不可以。它通常是一个叫做robots.txt的文本文件&#xff0c;一般放在网站的根目录下。 robots.txt文件的样例 对有所爬虫均生效&#…
阅读更多...
Unity游戏(Assault空对地打击)开发(4) 碰撞体和刚体的添加

Unity游戏(Assault空对地打击)开发(4) 碰撞体和刚体的添加

前言 飞机和世界的大小关系不太对&#xff0c;我稍微缩小了一下飞机。 详细步骤 选中所有地形对象&#xff0c;如果没有圈起的部分&#xff0c;点击Add Component搜索添加。 接着选中Player对象&#xff0c;添加这两个组件&#xff0c;最好&#xff08;仅对于本项目开发&#x…
阅读更多...
【Linux】从硬件到软件了解进程

【Linux】从硬件到软件了解进程

个人主页~ 从硬件到软件了解进程 一、冯诺依曼体系结构二、操作系统三、操作系统进程管理1、概念2、PCB和task_struct3、查看进程4、通过系统调用fork创建进程&#xff08;1&#xff09;简述&#xff08;2&#xff09;系统调用生成子进程的过程〇提出问题①fork函数②父子进程关…
阅读更多...
Maven全解析：从基础到精通的实战指南

Maven全解析：从基础到精通的实战指南

概念&#xff1a; Maven 是跨平台的项目管理工具。主要服务基于 Java 平台的构建&#xff0c;依赖管理和项目信息管理项目构建&#xff1a;高度自动化&#xff0c;跨平台&#xff0c;可重用的组件&#xff0c;标准化的流程 依赖管理&#xff1a; 对第三方依赖包的管理&#xf…
阅读更多...
MATLAB实现单层竞争神经网络数据分类

MATLAB实现单层竞争神经网络数据分类

一.单层竞争神经网络介绍 单层竞争神经网络&#xff08;Single-Layer Competitive Neural Network&#xff09;是一种基于竞争学习的神经网络模型&#xff0c;主要用于数据分类和模式识别。其核心思想是通过神经元之间的竞争机制&#xff0c;使得网络能够自动学习输入数据的特…
阅读更多...
Weevely代码分析

Weevely代码分析

亲测php5和php8都无效&#xff0c;只有php7有效 ailx10 1949 次咨询 4.9 网络安全优秀回答者 互联网行业 安全攻防员 去咨询 上一次做weevely实验可以追溯到2020年&#xff0c;当时还是weevely3.7&#xff0c;现在的是weevely4 生成php网页木马依然差不多…… php菜刀we…
阅读更多...
【AI大模型】DeepSeek API大模型接口实现

【AI大模型】DeepSeek API大模型接口实现

目录 一、DeepSeek发展历程 2023 年&#xff1a;创立与核心技术突破 2024 年&#xff1a;开源生态与行业落地 2025 年&#xff1a;多模态与全球化布局 性能对齐 OpenAI-o1 正式版​ 二、API接口调用 1.DeepSeek-V3模型调用 2.DeepSeek-R1模型调用 三、本地化部署接口调…
阅读更多...
具身智能-强化学习-强化学习基础-马尔可夫

具身智能-强化学习-强化学习基础-马尔可夫

文章目录 参考强化学习基础强化学习特点reward函数两种强化学习两种策略&#xff1a;探索&#xff08;Exploration&#xff09; vs. 利用&#xff08;Exploitation&#xff09;gym库的使用 马尔可夫马尔可夫过程马尔可夫奖励过程&#xff08;Markov Reward Process, MRP&#x…
阅读更多...
半导体器件与物理篇5 mosfet及相关器件

半导体器件与物理篇5 mosfet及相关器件

认识mos二极管 MOS二极管是研究半导体表面特性最有用的器件之一。MOS二极管可作为存储电容器&#xff0c;并且是电荷耦合器件(CCD)的基本结构单元。 MOS二极管结构的重要参数包括&#xff1a;氧化层厚度d&#xff1b;施加于金属平板上的电压V&#xff08;正偏压时V为正&#x…
阅读更多...
037 DFS回溯

037 DFS回溯

1.回溯模板求排列 2.回溯模板求子集 # 当前位于点x&#xff0c;步长为length def dfs(x,length):passvis[x]length #接下来走下一个点 #判断下一个点是否走过if vis[a[x]]!0:#此时存在环global ansansmax(ans,length-vis[a[x]]1)else:dfs(a[x],length1)nint(input()) a[0]list(…
阅读更多...
RK3568使用QT搭建TCP服务器和客户端

RK3568使用QT搭建TCP服务器和客户端

文章目录 一、让RK3568开发板先连接上wifi二、客户端代码1. `widget.h` 文件2. `widget.cpp` 文件**详细讲解**1. **`Widget` 类构造函数 (`Widget::Widget`)**2. **UI 布局 (`setupUI`)**3. **连接按钮的槽函数 (`onConnectClicked`)**4. **发送消息按钮的槽函数 (`onSendMess…
阅读更多...
力扣988. 从叶结点开始的最小字符串

力扣988. 从叶结点开始的最小字符串

Problem: 988. 从叶结点开始的最小字符串 文章目录 题目描述思路复杂度Code 题目描述 思路 遍历思想(利用二叉树的先序遍历) 在先序遍历的过程中&#xff0c;用一个变量path拼接记录下其组成的字符串&#xff0c;当遇到根节点时再将其反转并比较大小&#xff08;字典顺序大小&…
阅读更多...
推荐文章
最新文章

Copyright @ 2022~2023