ELK进阶-安全认证设置流程介绍

目录

一、前言

二、ElasticSearch的安全认证配置

设置ElasticSearch的安全认证功能(最低)

启用TLS/SSL加密通信

(1)生成CA证书

(2)生成transport证书

(3)生成http证书

(4)完整配置ES

三、Kibana 安全配置

四、Logstash配置补充

五、后记


一、前言

在数字化转型的浪潮中,企业对于数据的依赖日益增强,而日志数据作为业务运行的“脉络图”,其重要性不言而喻。ELFK(Elasticsearch, Logstash, Filebeat, Kibana)作为一套强大的日志监控系统,为企业提供了从数据采集、处理到可视化的完整解决方案。然而,随着数据价值的提升,安全问题也日益凸显,如何在享受ELFK带来的高效与便捷的同时,确保数据的安全与合规,成为了企业必须面对的挑战。

安全认证,作为守护数据安全的第一道防线,其在ELFK系统中的必要性不容忽视。上文笔者介绍的ELFK的基础搭建流程以及日志采集方式配置过程,但是整个日志监控系统是完全没有安全性可言的。kibana也是没有任何访问认证就能直接访问,显然这与实际使用是有较大差别的。一般企业级的日志监控系统可能需要满足一下要求:

  1. 数据保护

  • 防止未经授权的访问:ELFK系统通常处理敏感的日志数据,包括用户活动、系统错误和应用程序运行状态。安全认证可以防止未经授权的用户访问这些数据,保护企业机密。

  • 数据完整性:通过认证机制,确保所有的日志数据来源是可信的,避免恶意用户篡改日志内容。

  1. 合规要求

  • 满足法规标准:许多行业法规(如GDPR、HIPAA等)要求企业保护用户数据隐私及其访问控制。通过实施安全认证,ELFK系统可以帮助企业满足这些合规要求。

  1. 访问控制

  • 分层权限管理:ELFK的安全认证可以实现细粒度的权限控制,确保不同角色或用户组只能访问其权限范围内的数据。例如,仅限运维人员可查看系统级日志,而开发人员可以访问应用程序日志。

  1. 保护完整基础设施

  • 防止攻击:加强ELFK各组件的安全认证可以减少被攻击的风险。比如,防止Elasticsearch暴露在公网上而被攻击者利用。

  • 防止日志注入:对日志输入进行验证,通过安全认证措施,防止恶意代码通过日志注入而影响系统。

  1. 安全审计

  • 追踪和记录访问行为:安全认证可以帮助记录和监控用户访问日志的行为,提供详细的日志访问历史记录。这在需要进行安全审计或调查时非常有用。

因此本文将深入探讨如何通过实施有效的安全认证措施,为企业构建一个既高效又安全的日志监控环境。

二、ElasticSearch的安全认证配置

设置ElasticSearch的安全认证功能(最低)

ElasticSearch的安全访问需要开启x-pack安全验证:xpack.security.enabled: true。X-Pack是Elasticsearch的一个插件,提供了安全、监控、报警和报告等功能。承接上文ELFK基础搭建流程及在SpringBoot项目中进行日志采集的简单实践,笔者在搭建简易版的时候是设置为false给关闭了,那么现在需要让他正常开启。然后需要进行一个内置账户密码的配置,Elasticsearch提供了一些内置用户(如elastickibanalogstash_system等),我们需要为这些用户设置密码,否则普通访问就会访问失败。

root@master01:~# su elasticsearch
elasticsearch@master01:/root$ cd /data/elk/es
elasticsearch@master01:/data/elk/es$ vi config/elasticsearch.yml 
elasticsearch@master01:/data/elk/es$ sudo docker restart es
[sudo] elasticsearch 的密码: 
es
elasticsearch@master01:/data/elk/es$ curl http://192.168.1.200:9200
{"error":{"root_cause":[{"type":"security_exception","reason":"missing authentication credentials for REST request [/]","header":{"WWW-Authenticate":["Basic realm=\"security\", charset=\"UTF-8\"","ApiKey"]}}],"type":"security_exception","reason":"missing authentication credentials for REST request [/]","header":{"WWW-Authenticate":["Basic realm=\"security\", charset=\"UTF-8\"","ApiKey"]}},"status":401}elasticsearch@master01:/data/elk/es$ 

正常初始运行ElasticSearch时他会在控制台提供一个账号信息,但是由于我们一开始就关闭了,并且不太方便追踪,所以在开启认证后需要重新设置一下。

设置步骤如下:

1,进入es容器内部

elasticsearch@master01:/root$ sudo docker exec -it es /bin/bash
[sudo] elasticsearch 的密码: 
elasticsearch@master01:~$ ls
LICENSE.txt  NOTICE.txt  README.asciidoc  bin  config  data  jdk  lib  logs  modules  plugins
elasticsearch@master01:~$ ll 
total 2312
drwxrwxr-x  1 root          root    4096 Aug 17 14:47 ./
drwxr-xr-x  1 root          root    4096 Aug  5 10:12 ../
-rw-r--r--  1 root          root     220 Aug  5 10:12 .bash_logout
-rw-r--r--  1 root          root    3771 Aug  5 10:12 .bashrc
drwxrwxr-x  3 elasticsearch root    4096 Aug 17 14:47 .cache/
-rw-r--r--  1 root          root     807 Aug  5 10:12 .profile
-r--r--r--  1 root          root    3860 Aug  5 10:11 LICENSE.txt
-r--r--r--  1 root          root 2285006 Aug  5 10:11 NOTICE.txt
-r--r--r--  1 root          root    9111 Aug  5 10:11 README.asciidoc
drwxrwxr-x  1 elasticsearch root    4096 Aug  5 10:12 bin/
drwxrwxr-x  1 elasticsearch root    4096 Aug 17 14:47 config/
drwxrwxrwx  5          1001 1001    4096 Aug 21 12:29 data/
dr-xr-xr-x  1 root          root    4096 Aug  5 10:11 jdk/
dr-xr-xr-x  6 root          root    4096 Aug  5 10:11 lib/
drwxrwxrwx  2          1001 1001    4096 Aug 21 12:25 logs/
dr-xr-xr-x 83 root          root    4096 Aug  5 10:11 modules/
drwxrwxr-x  1 elasticsearch root    4096 Aug  5 10:11 plugins/

2,设置密码操作  

elasticsearch除了开启安全自动配置可自动生成初始密码外,手动设置一般有三种方式。由于自动配置需要在es启动控制台查看输出的密码信息,不便于查看,因此这块不做主要解释,仅以手动配置为主:

  1. Elastic bootstrap password

  2. bin/elasticsearch-reset-password -u elastic

  3. elasticsearch-setup-passwords interactive

在安装 Elasticsearch 时,启用安全认证后如果 elastic 用户还没有密码,它将使用默认的 bootstrap。 bootstrap 是一种临时密码,使我们可以运行设置所有内置用户密码的工具。默认情况下,bootstrap 密码来自于随机化的 keystore.seed 设置,该设置在安装过程中添加到了密钥库中。 我们不需要知道或更改此 bootstrap 密码。 但是,如果我们在密钥库中定义了 bootstrap.password 设置,则将使用该值。但是实际keystore.seed中我们并不知道密码是多少,所以需要我们自己设置bootstrap.password。

另外如果我们为内置用户(尤其是 elastic 用户)设置密码后,bootstrap 密码将不再使用。这里我们可以进入es容器后使用 -x 选项从 stdin 中读取密码并配置bootstrap密码:

elasticsearch@master01:/data/elk/es/data$ sudo docker exec -it es /bin/bash 
elasticsearch@master01:~$ pwd
/usr/share/elasticsearch
elasticsearch@master01:~$ bin/elasticsearch-keystore list
keystore.seed
elasticsearch@master01:~$ echo "elastic" |bin/elasticsearch-keystore add -x "bootstrap.password"
elasticsearch@master01:~$ bin/elasticsearch-keystore list
bootstrap.password
keystore.seed

然后需要重启es,因为所有对keystore的修改需要重启Elasticsearch后才能生效。这些设置,就像elasticsearch中对Yml配置文件的修改,需要在集群的每个节点上指定,并重启后才会生效。这个密钥库也是如此,对密钥库的任何更改都将在重新启动Elasticsearch时生效。然后就可以通过我们这个初步配置的密码进行访问了:

elasticsearch@master01:/data/elk/es/data$ sudo docker restart es
es
elasticsearch@master01:/data/elk/es/data$ curl http://192.168.1.200:9200 -u elastic:elastic
{"name" : "master01","cluster_name" : "es-master","cluster_uuid" : "SPlA9bg2Sly4fKzvbQbzTA","version" : {"number" : "8.15.0","build_flavor" : "default","build_type" : "docker","build_hash" : "1a77947f34deddb41af25e6f0ddb8e830159c179","build_date" : "2024-08-05T10:05:34.233336849Z","build_snapshot" : false,"lucene_version" : "9.11.1","minimum_wire_compatibility_version" : "7.17.0","minimum_index_compatibility_version" : "7.0.0"},"tagline" : "You Know, for Search"
}

第二种就是通过运行elasticsearch-reset-password实用程序为弹性内置用户设置密码。该命令将密码重置为自动生成的值。如果需要将密码设置为一个特定的值,可以使用带interactive (-i)参数的命令:./bin/elasticsearch-reset-password -u elastic。同时也可以用这个命令为其他内置用户设置密码:./bin/elasticsearch-reset-password -u kibana_system

最后一种elasticsearch-setup-passwords interactive用于一次性批量设置密码。这里为了方便我们用第三种方式设置即可。

此时需要我们依次设置用户:elastic、apm_system、kibana_system、logstash_system、beats_system、remote_monitoring_user共6个用户,并为每个内置用户设置密码。

elasticsearch@master01:/data/elk/es/data$ sudo docker exec -it es /bin/bash bin/elasticsearch-setup-passwords interactive
******************************************************************************
Note: The 'elasticsearch-setup-passwords' tool has been deprecated. This       command will be removed in a future release.
******************************************************************************Initiating the setup of passwords for reserved users elastic,apm_system,kibana,kibana_system,logstash_system,beats_system,remote_monitoring_user.
You will be prompted to enter passwords as the process progresses.
Please confirm that you would like to continue [y/N]yEnter password for [elastic]: 
Reenter password for [elastic]: 
Enter password for [apm_system]: 
Reenter password for [apm_system]: 
Enter password for [kibana_system]: 
Reenter password for [kibana_system]: 
Enter password for [logstash_system]: 
Reenter password for [logstash_system]: 
Enter password for [beats_system]: 
Reenter password for [beats_system]: 
Enter password for [remote_monitoring_user]: 
Reenter password for [remote_monitoring_user]: 
Changed password for user [apm_system]
Changed password for user [kibana_system]
Changed password for user [kibana]
Changed password for user [logstash_system]
Changed password for user [beats_system]
Changed password for user [remote_monitoring_user]
Changed password for user [elastic]

然后就可以通过账号密码进行访问了。

root@master01:~# curl http://localhost:9200 -u elastic:elastic
{"name" : "master01","cluster_name" : "es-master","cluster_uuid" : "SPlA9bg2Sly4fKzvbQbzTA","version" : {"number" : "8.15.0","build_flavor" : "default","build_type" : "docker","build_hash" : "1a77947f34deddb41af25e6f0ddb8e830159c179","build_date" : "2024-08-05T10:05:34.233336849Z","build_snapshot" : false,"lucene_version" : "9.11.1","minimum_wire_compatibility_version" : "7.17.0","minimum_index_compatibility_version" : "7.0.0"},"tagline" : "You Know, for Search"
}

当然这从 ES官方文档角度而言只是最小安全配置,如果向把安全配置程度提高,我们一般还可以继续配置TLS和HTTPS。

启用TLS/SSL加密通信

TLS(Transport Layer Security)和 HTTPS 主要是为了确保数据在传输过程中的安全性和保护敏感信息不被窃取或篡改。而在ElasticSearch中,数据传输是通过网络进行的,对于某些敏感信息,例如用户凭据、个人身份信息等。如果不通过加密方式传输数据,那么在传输过程中可能会被恶意用户截获或窃取。因此通过配置 TLS 和使用 HTTPS 协议,可以加密通信内容,确保数据传输过程中的安全性。

在 Elasticsearch 中,安全通信也需要使用TLS/SSL证书。这些证书可以用于保护Elasticsearch节点之间的通信(Transport层)以及客户端与Elasticsearch之间的通信(HTTP层)。特别是生产环境中的ES集群我们必须在节点之间配置传输层安全性(TLS)。如果不启用TLS,生产模式集群将不会启动。

所以很多情况下都需要我们自己去配置Certificates and Keys。证书和密钥是配置 TLS 和 HTTPS 的基础,用于加密通信和验证身份。

ElasticSearch中使用的证书一般有3种:

  1. CA是一个颁发和验证数字证书的可信任实体,用于确保通信双方身份的合法性。在配置 TLS 时,通常需要生成自签名证书或向第三方 CA 申请证书。在ES中就可以通过elasticsearch-certutil工具自生成CA证书,并以它为基础去生成其他证书。

  2. transport证书,用于ES节点之间通讯。

  3. http证书,用于client访问,包括ES自带的/bin下的脚本文件也会依赖这个证书调用当前ES的API

根据ES官网文档指导,一般生成证书的方式有两种:

(1)生成CA证书
elasticsearch@master01:~$ bin/elasticsearch-certutil ca
This tool assists you in the generation of X.509 certificates and certificate
signing requests for use with SSL/TLS in the Elastic stack.The 'ca' mode generates a new 'certificate authority'
This will create a new X.509 certificate and private key that can be used
to sign certificate when running in 'cert' mode.Use the 'ca-dn' option if you wish to configure the 'distinguished name'
of the certificate authorityBy default the 'ca' mode produces a single PKCS#12 output file which holds:* The CA certificate* The CA's private keyIf you elect to generate PEM format certificates (the -pem option), then the output will
be a zip file containing individual files for the CA certificate and private key
#取名,默认为elastic-stack-ca.p12
Please enter the desired output file [elastic-stack-ca.p12]: es-ca.p12
#设置证书密码,默认为空
Enter password for es-ca.p12 : 
elasticsearch@master01:~$ ls -l
total 2284
-r--r--r--  1 root          root    3860 Aug  5 10:11 LICENSE.txt
-r--r--r--  1 root          root 2285006 Aug  5 10:11 NOTICE.txt
-r--r--r--  1 root          root    9111 Aug  5 10:11 README.asciidoc
drwxrwxr-x  1 elasticsearch root    4096 Aug  5 10:12 bin
drwxrwxr-x  1 elasticsearch root    4096 Aug 17 14:47 config
drwxrwxrwx  5          1001 1001    4096 Aug 21 12:41 data
-rw-------  1 elasticsearch root    2672 Aug 21 12:42 es-ca.p12
dr-xr-xr-x  1 root          root    4096 Aug  5 10:11 jdk
dr-xr-xr-x  6 root          root    4096 Aug  5 10:11 lib
drwxrwxrwx  2          1001 1001    4096 Aug 21 12:25 logs
dr-xr-xr-x 83 root          root    4096 Aug  5 10:11 modules
drwxrwxr-x  1 elasticsearch root    4096 Aug  5 10:11 plugins

默认情况下,“ca” 模式生成一个 P12 输出文件,其中包含:

  • CA 证书

  • CA 的私钥

这里可以选择添加证书密码,如果添加密码的话,后续使用CA证书去生成其他证书都需要先校验密码。默认会在es根目录(/usr/share)下生成 elastic-stack-ca.p12 这个CA证书文件,在实际操作中可根据自己的实际情况进行调整。

这里笔者建议设置密码,不然可能会没有证书链信息。顺序操作后就能看到生成的elastic-stack-ca.p12文件了。

我们可以通过如下方式检查证书信息:

1.1,openssl查看

elasticsearch@master01:~$ openssl pkcs12 -info -nodes -in es-ca.p12 
Enter Import Password:
MAC: sha256, Iteration 10000
MAC length: 32, salt length: 20
PKCS7 Data
Shrouded Keybag: PBES2, PBKDF2, AES-256-CBC, Iteration 10000, PRF hmacWithSHA256
Bag AttributesfriendlyName: calocalKeyID: 54 69 6D 65 20 31 37 32 34 32 34 34 31 34 35 36 32 31 
Key Attributes: <No Attributes>
-----BEGIN PRIVATE KEY-----
MIIEvAIBADANBgkqhkiG9w0BAQEFAASCBKYwggSiAgEAAoIBAQCkvzQRIfKTKiek
zLGqjZ3Rttw9z/wKWF1w9rnQtTuaPa9ov3ZZLs462FSYnI/6ivkI90WEK5znbd87
Vlw55nVYFVe3LCRLDOqA1rarvgaZ9NhtGwePejHpeg6bE6RZlhMVqlCr4Hh7yW+M
6zlRi5MamdB8BJ8/T8U0BLnVGGcPq4Hg8d2kmnCrkxQ5fBM9eUQba0PFQsuXcBs9
1NePUhcU4ckBw4/oG0lKlDz8/5Sp1150Ahb1S2Y0X1FveoNb5eu/9mh7bhTX7owO
MIyvJDuGQ0IKqcccaEN+IiQeTX2OB4HgqXZVzDri1zz7E7k8LbwMXcVj6waK9vQR
7ptKrk6/AgMBAAECggEAD5tfctoM8V0WeVm84QPedg4FKkPoRBCf9YIiEzol
Al7U9tjkx5VT2ktGpn0A35URPFanXBNACQ6C2SdYaXpIH32qiIOWOZNdpcJwPKiB
0kAzxKdWUCB0fsNrF+OMNkq2rrmqoEtyal6kRPHcgzIcGouTjHthmq5x7lqL9ONr
EOksS6LYYFyETI1GFCxMICzyvAVbmxxbO/m405852hv4Rx1O/+T/Ju234rjaSPpO
3XT1WhoZzMmQ7xT6Xwm+4IhIgrWYb7R5TOnE9H0MpOsjIN3oeOkLlqa7/Muf8uPi
AL5kZl9FdAJjGJYuKvrjd2mRxga1s0AgDJzqO+pTRQKBgQDGZtv6izyfh9+4orBV
MdO8v1Cxt3olD/pegGlOoFc2n9LAIUG0lF0KP3Nn34XIdfLBGDOXJtNOdDzGIXS7
Y+tcDOQmq0080hU8rBq5mBkYf2csRVh+pKDoA3oKhWjgrG9drZsZ8b+0ENHmhif0
SRNeY77GcJZcvdBIx+knA7wEEwKBgQDUkyAK8FVCqw4QxHrbXWsWkNwAf/TTyNZv
2Ih3853au4jdVKN/sn+hfgLNI4xFJf5PUA/x9bR71F2aOa1l/xt9cSxQqFAM7xy0
3Toi6HL6iVph2NHQwMhORrWZLGG0wUYhvaWu2PXVqx+UJMBHHjswrkoL72oInr/m
8dLd3P5oJQKBgE7wxj4eAHUJPv7b3IVJWhITnSvY8QSmItxPA5eBPLJDTTuc/+O1
1H8rV+PQkA5+v6QM2RofHJxuq2+6CBQ3YYIyruSj7AtzG3gUkl2eIv4YUxjOTrO1
FUC7gWeGRYB/m6AOX1QnWDtxJdMvNd6A5O/9h/609V7ZN3J9+ErJtZl5AoGAeoNs
xUEsMmc5jQpgMEuP64qDcTpN1T178SwfwtpCEQ1iXQVp0bADhQSGAsrJDhVOk1F2
TyIn6fJEHB2/xPgZVNvECZxnvnyU09xopDPKCIDe+WOn0SM6jnqMMQJ2MWHu1IVj
lvjt/j5Ize28b4CJ5o2cmXJbbypnOWgH+txiN40CgYBVlU6MDbUXtBLuuQX2nLlz
J+cAN2T5NgamZpozW+w9cBlqQ6OnVmUMI1mIeY3ypY2BgHauChkM+vEk5Z1nLcD8
dXlYwSxfFhaOtTT2ezMqg4/pvSObOEwrCvWn6cSHd5rGTmyN2aIBgT7GDoQ/Fw9N
X4rAjIW7B14Dbmlw3FDDPA==
-----END PRIVATE KEY-----
PKCS7 Encrypted data: PBES2, PBKDF2, AES-256-CBC, Iteration 10000, PRF hmacWithSHA256
Certificate bag
Bag AttributesfriendlyName: calocalKeyID: 54 69 6D 65 20 31 37 32 34 32 34 34 31 34 35 36 32 31 
subject=CN = Elastic Certificate Tool Autogenerated CAissuer=CN = Elastic Certificate Tool Autogenerated CA-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----

 也可以查询证书的到期时间:

elasticsearch@master01:~$ openssl pkcs12 -in es-ca.p12 -nodes -nokeys -clcerts | openssl x509 -enddate -noout
Enter Import Password:
notAfter=Aug 21 12:41:40 2027 GMT

这里可以看到证书有效期大概是3年。

1.2,keytool

keytool这个工具是es内jdk自带的,也可以进行证书信息查看。

elasticsearch@master01:~$ jdk/bin/keytool -keystore es-ca.p12 -list
Enter keystore password:  
Keystore type: PKCS12
Keystore provider: SUNYour keystore contains 1 entryca, Aug 21, 2024, PrivateKeyEntry, 
Certificate fingerprint (SHA-256): 60:95:CD:3B:4E:A0:D7:43:13:C2:F1:D9:11:B1:AA:B8:02:BB:2D:0E:3E:C5:CE:82:F5:8A:D7:49:99:A5:70:A7

然后就可以通过这个文件去生成其他证书了。

(2)生成transport证书

常见的证书格式包括PKCS#12(.p12)和PEM(.pem)。这里需要利用得到的ca来创建transports证书,这里分别展示p12与pem格式的生成方式:

1、p12证书生成

elasticsearch@master01:~$ bin/elasticsearch-certutil cert --ca es-ca.p12 
This tool assists you in the generation of X.509 certificates and certificate
signing requests for use with SSL/TLS in the Elastic stack.The 'cert' mode generates X.509 certificate and private keys.* By default, this generates a single certificate and key for useon a single instance.* The '-multiple' option will prompt you to enter details for multipleinstances and will generate a certificate and key for each one* The '-in' option allows for the certificate generation to be automated by describingthe details of each instance in a YAML file* An instance is any piece of the Elastic Stack that requires an SSL certificate.Depending on your configuration, Elasticsearch, Logstash, Kibana, and Beatsmay all require a certificate and private key.* The minimum required value for each instance is a name. This can simply be thehostname, which will be used as the Common Name of the certificate. A fulldistinguished name may also be used.* A filename value may be required for each instance. This is necessary when thename would result in an invalid file or directory name. The name provided hereis used as the directory name (within the zip) and the prefix for the key andcertificate files. The filename is required if you are prompted and the nameis not displayed in the prompt.* IP addresses and DNS names are optional. Multiple values can be specified as acomma separated string. If no IP addresses or DNS names are provided, you maydisable hostname verification in your SSL configuration.* All certificates generated by this tool will be signed by a certificate authority (CA)unless the --self-signed command line option is specified.The tool can automatically generate a new CA for you, or you can provide your own withthe --ca or --ca-cert command line options.By default the 'cert' mode produces a single PKCS#12 output file which holds:* The instance certificate* The private key for the instance certificate* The CA certificateIf you specify any of the following options:* -pem (PEM formatted output)* -multiple (generate multiple certificates)* -in (generate certificates from an input file)
then the output will be be a zip file containing individual certificate/key files
#输入ca证书密码
Enter password for CA (es-ca.p12) : 
#输入cert证书名称,默认为elastic-certificates.p12
Please enter the desired output file [elastic-certificates.p12]: es-cert.p12
#设置cert证书密码,默认为空
Enter password for es-cert.p12 : Certificates written to /usr/share/elasticsearch/es-cert.p12This file should be properly secured as it contains the private key for 
your instance.
This file is a self contained file and can be copied and used 'as is'
For each Elastic product that you wish to configure, you should copy
this '.p12' file to the relevant configuration directory
and then follow the SSL configuration instructions in the product guide.For client applications, you may only need to copy the CA certificate and
configure the client to trust this certificate.
elasticsearch@master01:~$ ls -l
total 2288
-r--r--r--  1 root          root    3860 Aug  5 10:11 LICENSE.txt
-r--r--r--  1 root          root 2285006 Aug  5 10:11 NOTICE.txt
-r--r--r--  1 root          root    9111 Aug  5 10:11 README.asciidoc
drwxrwxr-x  1 elasticsearch root    4096 Aug  5 10:12 bin
drwxrwxr-x  1 elasticsearch root    4096 Aug 17 14:47 config
drwxrwxrwx  5          1001 1001    4096 Aug 21 12:45 data
-rw-------  1 elasticsearch root    2672 Aug 21 12:42 es-ca.p12
-rw-------  1 elasticsearch root    3596 Aug 21 12:46 es-cert.p12
dr-xr-xr-x  1 root          root    4096 Aug  5 10:11 jdk
dr-xr-xr-x  6 root          root    4096 Aug  5 10:11 lib
drwxrwxrwx  2          1001 1001    4096 Aug 21 12:25 logs
dr-xr-xr-x 83 root          root    4096 Aug  5 10:11 modules
drwxrwxr-x  1 elasticsearch root    4096 Aug  5 10:11 plugins

 设置密码后,一路回车就可以通过CA文件在该目录下生成 elastic-certificates.p12文件。就是es配置需要的文件了。

2、pem 和 key 证书生成

这种证书和HTTPS配置的证书文件类似,也能支持es进行安全配置。与上面的p12不同的是,它需要使用的是ca的压缩文件中的crt、key文件去生成对应的实例证书文件:

elasticsearch@es:~$ bin/elasticsearch-certutil ca --pem
This tool assists you in the generation of X.509 certificates and certificate
signing requests for use with SSL/TLS in the Elastic stack.The 'ca' mode generates a new 'certificate authority'
This will create a new X.509 certificate and private key that can be used
to sign certificate when running in 'cert' mode.Use the 'ca-dn' option if you wish to configure the 'distinguished name'
of the certificate authorityBy default the 'ca' mode produces a single PKCS#12 output file which holds:* The CA certificate* The CA's private keyIf you elect to generate PEM format certificates (the -pem option), then the output will
be a zip file containing individual files for the CA certificate and private keyPlease enter the desired output file [elastic-stack-ca.zip]: 
elasticsearch@es:~$ ll
total 2272
drwxrwxr-x  1 root          root    4096 Mar  8 09:16 ./
drwxr-xr-x  1 root          root    4096 Sep 14 20:23 ../
-rw-------  1 elasticsearch root     101 Mar  8 02:16 .bash_history
-rw-r--r--  1 root          root     220 Sep 14 20:23 .bash_logout
-rw-r--r--  1 root          root    3771 Sep 14 20:23 .bashrc
drwxrwxr-x  3 elasticsearch root    4096 Mar  8 01:46 .cache/
-rw-r--r--  1 root          root     807 Sep 14 20:23 .profile
-r--r--r--  1 root          root    3860 Sep 14 20:22 LICENSE.txt
-r--r--r--  1 root          root 2231504 Sep 14 20:22 NOTICE.txt
-r--r--r--  1 root          root    8157 Sep 14 20:22 README.asciidoc
drwxrwxr-x  1 elasticsearch root    4096 Sep 14 20:23 bin/
drwxrwxr-x  1 elasticsearch root    4096 Mar  8 02:04 config/
drwxrwxrwx  5           777 root    4096 Mar  8 09:15 data/
-rw-------  1 elasticsearch root    2514 Mar  8 09:16 elastic-stack-ca.zip
dr-xr-xr-x  1 root          root    4096 Sep 14 20:22 jdk/
dr-xr-xr-x  5 root          root    4096 Sep 14 20:22 lib/
drwxrwxrwx  2           777 root    4096 Mar  8 06:23 logs/
dr-xr-xr-x 76 root          root    4096 Sep 14 20:22 modules/
drwxrwxr-x  1 elasticsearch root    4096 Sep 14 20:22 plugins/

这种方式会生成一个存放ca文件的zip压缩文件,解压后继续生成实际的证书文件:

elasticsearch@es:~$ bin/elasticsearch-certutil cert -ca-cert ca/ca.crt -ca-key ca/ca.key --pem
This tool assists you in the generation of X.509 certificates and certificate
signing requests for use with SSL/TLS in the Elastic stack.The 'cert' mode generates X.509 certificate and private keys.* By default, this generates a single certificate and key for useon a single instance.* The '-multiple' option will prompt you to enter details for multipleinstances and will generate a certificate and key for each one* The '-in' option allows for the certificate generation to be automated by describingthe details of each instance in a YAML file* An instance is any piece of the Elastic Stack that requires an SSL certificate.Depending on your configuration, Elasticsearch, Logstash, Kibana, and Beatsmay all require a certificate and private key.* The minimum required value for each instance is a name. This can simply be thehostname, which will be used as the Common Name of the certificate. A fulldistinguished name may also be used.* A filename value may be required for each instance. This is necessary when thename would result in an invalid file or directory name. The name provided hereis used as the directory name (within the zip) and the prefix for the key andcertificate files. The filename is required if you are prompted and the nameis not displayed in the prompt.* IP addresses and DNS names are optional. Multiple values can be specified as acomma separated string. If no IP addresses or DNS names are provided, you maydisable hostname verification in your SSL configuration.* All certificates generated by this tool will be signed by a certificate authority (CA)unless the --self-signed command line option is specified.The tool can automatically generate a new CA for you, or you can provide your own withthe --ca or --ca-cert command line options.By default the 'cert' mode produces a single PKCS#12 output file which holds:* The instance certificate* The private key for the instance certificate* The CA certificateIf you specify any of the following options:* -pem (PEM formatted output)* -multiple (generate multiple certificates)* -in (generate certificates from an input file)
then the output will be be a zip file containing individual certificate/key filesPlease enter the desired output file [certificate-bundle.zip]: Certificates written to /usr/share/elasticsearch/certificate-bundle.zipThis file should be properly secured as it contains the private key for 
your instance.
After unzipping the file, there will be a directory for each instance.
Each instance has a certificate and private key.
For each Elastic product that you wish to configure, you should copy
the certificate, key, and CA certificate to the relevant configuration directory
and then follow the SSL configuration instructions in the product guide.For client applications, you may only need to copy the CA certificate and
configure the client to trust this certificate.
elasticsearch@es:~$ ls
LICENSE.txt      ca/                     elastic-certificates.p12  lib/
NOTICE.txt       certificate-bundle.zip  elastic-stack-ca.p12      logs/
README.asciidoc  config/                 elastic-stack-ca.zip      modules/
bin/             data/                   jdk/                      plugins/

这样会生成最终的一个 名为certificate-bundle.zip的压缩包,解压后即可得到我们需要的配置文件:

elasticsearch@es:~$ unzip certificate-bundle.zip 
Archive:  certificate-bundle.zipcreating: instance/inflating: instance/instance.crt   inflating: instance/instance.key   
elasticsearch@es:~$ cd instance/
elasticsearch@es:~/instance$ ll
total 20
drwxr-xr-x 2 elasticsearch root 4096 Mar  8 09:20 ./
drwxrwxr-x 1 root          root 4096 Mar  8 09:21 ../
-rw-r--r-- 1 elasticsearch root 1147 Mar  8 09:20 instance.crt
-rw-r--r-- 1 elasticsearch root 1679 Mar  8 09:20 instance.key

同样可以通过openssl查看证书信息:

elasticsearch@es:~$ openssl x509 -in instance/instance.crt -text -noout
Certificate:Data:Version: 3 (0x2)Serial Number:d4:80:94:4c:38:b5:67:ae:c5:b1:38:25:2c:2c:fe:a2:71:b0:6b:b6Signature Algorithm: sha256WithRSAEncryptionIssuer: CN = Elastic Certificate Tool Autogenerated CAValidityNot Before: Mar  8 09:20:09 2024 GMTNot After : Mar  8 09:20:09 2027 GMTSubject: CN = instanceSubject Public Key Info:Public Key Algorithm: rsaEncryptionRSA Public-Key: (2048 bit)Modulus:00:c7:ed:e3:5b:72:6e:c8:a7:5f:d6:8f:a2:99:3a:62:18:fe:fd:b8:18:4f:c8:af:59:1d:cd:9c:fc:fb:de:49:df:a3:d1:35:06:68:e6:76:6d:7f:fb:0e:88:d8:ff:62:9f:52:9c:8b:a3:a7:10:89:72:98:9c:01:d3:60:44:07:64:ad:d3:ce:f4:ce:d3:e9:a5:81:30:40:0e:3d:c9:29:ac:36:33:28:19:d1:aa:2f:87:17:4a:a7:6d:65:29:96:24:31:3e:01:f8:4f:04:f3:a3:20:a0:eb:21:36:f9:f0:e6:cb:b6:8f:fc:7d:dc:4f:af:f5:e1:95:e0:9e:84:42:b7:5b:ad:67:7d:e1:59:9c:7b:28:d6:01:54:d7:0f:ad:86:ce:38:33:8c:86:4d:e9:46:89:c0:70:31:1e:03:e4:41:19:63:ab:dc:4a:50:d7:02:91:b7:70:15:f7:61:61:4f:3e:14:31:0f:74:11:9f:2e:e4:56:d4:97:2e:78:81:f7:48:f8:15:55:a7:c5:57:19:ef:5e:62:b8:8b:3f:e6:be:c5:04:2d:41:72:14:a9:e9:e7:be:08:03:39:d8:8b:94:d7:ec:10:24:8a:ac:32:b9:0b:5b:ef:7e:33:4f:b0:76:24:97:52:f4:8d:b7:2c:cb:f4:89:fe:38:45:44:5b:a1Exponent: 65537 (0x10001)X509v3 extensions:X509v3 Subject Key Identifier: FC:02:3C:5E:9B:4B:35:54:96:AB:5D:AB:7E:C7:08:CE:2C:94:05:CEX509v3 Authority Key Identifier: keyid:7E:52:11:3B:5C:88:9D:6A:27:2D:27:28:60:2F:34:E5:C4:0C:68:9AX509v3 Basic Constraints: CA:FALSESignature Algorithm: sha256WithRSAEncryption6b:e3:ed:40:50:59:3f:3f:b3:7a:5a:a5:b9:ab:06:d5:28:18:4d:17:89:ad:ab:dc:3d:0f:38:18:e9:82:0b:8a:b3:05:5f:4b:1a:5a:44:46:8c:ac:df:28:41:1a:76:b4:95:51:86:c0:2a:bf:13:47:0e:76:6b:08:d8:aa:06:ba:5c:50:11:a9:71:3b:9d:77:24:ac:bb:c2:06:85:d8:01:ec:4a:e4:75:ae:29:66:84:0f:ad:c6:83:8e:5b:61:23:74:af:44:7c:9b:8a:47:b2:fb:a3:3f:f8:c0:dc:37:36:38:d7:d2:e5:8e:8c:9b:64:3b:ae:26:41:6b:42:dc:f4:e3:d9:83:fe:f9:d9:2d:b2:7a:dc:74:74:f2:bd:5f:5f:37:5b:ad:b5:02:20:3a:33:cd:76:d1:0c:8d:84:61:b2:5d:a7:80:59:9a:e0:bd:d3:ba:ee:a3:8b:47:f0:07:08:53:7d:98:8e:2a:06:2d:a8:aa:54:45:f7:ae:af:42:dd:80:b1:15:4d:a9:36:46:ce:9c:8c:1c:74:7b:19:41:d4:aa:f1:65:ef:c9:c8:6c:44:b1:49:66:56:f8:fd:e3:c5:0a:7b:1c:76:77:05:37:a7:77:4c:a1:47:45:b8:49:55:b6:3c:f6:1c:64:a9:16:cc:7e:2c:57:a9:72:15:ad:16

然后我们可以将上述过程涉及到的密码存储到es的密钥库。bin/elasticsearch-keystore 是 Elasticsearch 提供的一个命令行工具,用于管理 Elasticsearch 的密钥库(keystore)。密钥库用于存储敏感配置,如密码、API 密钥等,以确保这些敏感信息在配置文件中不会以明文形式出现。

elasticsearch@master01:~$ bin/elasticsearch-keystore add xpack.security.transport.ssl.keystore.secure_password
Enter value for es-ca-pwd: 
elasticsearch@master01:~$ bin/elasticsearch-keystore add xpack.security.transport.ssl.truststore.secure_password  
Enter value for es-pwd: 
elasticsearch@master01:~$ bin/elasticsearch-keystore list
bootstrap.password
keystore.seed
xpack.security.transport.ssl.keystore.secure_password
xpack.security.transport.ssl.truststore.secure_password

将生成的p12文件拷贝到config目录下,怕容器文件丢失的话也可以将生成的证书文件拷贝到宿主机的es/config文件下,重新修改yml配置文件,增加transport.ssl配置:

#将容器内的p12文件拷贝的容器内的config目录下,以便es识别
elasticsearch@master01:/data/elk/es$ sudo docker exec -i es cp es-cert.p12 config/
elasticsearch@master01:/data/elk/es$ cat config/elasticsearch.yml
#集群名称
cluster.name: "es-master"
# 0.0.0.0为不限制,生产环境请设置为固定IP
network.host: 192.168.1.200
#设置对外服务的http端口,默认为9200
http.port: 9200
http.cors.enabled: true
#允许REST请求来自何处
http.cors.allow-origin: "*"
# 开启x-pack安全验证 访问时需要密码
xpack.security:enabled: truetransport.ssl:enabled: trueverification_mode: certificateclient_authentication: requiredkeystore.path: es-cert.p12truststore.path: es-cert.p12
elasticsearch@master01:/data/elk/es$ sudo docker restart es
es

此时访问kibana的话就需要进行配置了:

如果不继续进行https配置就可以到此为止了,不过这里咱们继续配置下去~

(3)生成http证书

执行http生成命令,具体生成过程如下:

elasticsearch@es:~$ bin/elasticsearch-certutil http## Elasticsearch HTTP Certificate UtilityThe 'http' command guides you through the process of generating certificates
for use on the HTTP (Rest) interface for Elasticsearch.This tool will ask you a number of questions in order to generate the right
set of files for your needs.## Do you wish to generate a Certificate Signing Request (CSR)?A CSR is used when you want your certificate to be created by an existing
Certificate Authority (CA) that you do not control (that is, you don't have
access to the keys for that CA). If you are in a corporate environment with a central security team, then you
may have an existing Corporate CA that can generate your certificate for you.
Infrastructure within your organisation may already be configured to trust this
CA, so it may be easier for clients to connect to Elasticsearch if you use a
CSR and send that request to the team that controls your CA.If you choose not to generate a CSR, this tool will generate a new certificate
for you. That certificate will be signed by a CA under your control. This is a
quick and easy way to secure your cluster with TLS, but you will need to
configure all your clients to trust that custom CA.Generate a CSR? [y/N]N #不用生成,我们用自己的CA## Do you have an existing Certificate Authority (CA) key-pair that you wish to use to sign your certificate?If you have an existing CA certificate and key, then you can use that CA to
sign your new http certificate. This allows you to use the same CA across
multiple Elasticsearch clusters which can make it easier to configure clients,
and may be easier for you to manage.If you do not have an existing CA, one will be generated for you.Use an existing CA? [y/N]y #用自己的CA## What is the path to your CA?Please enter the full pathname to the Certificate Authority that you wish to
use for signing your new http certificate. This can be in PKCS#12 (.p12), JKS
(.jks) or PEM (.crt, .key, .pem) format.
CA Path: /usr/share/elasticsearch/elastic-stack-ca.p12 #填CA地址
Reading a PKCS12 keystore requires a password.
It is possible for the keystore's password to be blank,
in which case you can simply press <ENTER> at the prompt
Password for elastic-stack-ca.p12:## How long should your certificates be valid?Every certificate has an expiry date. When the expiry date is reached clients
will stop trusting your certificate and TLS connections will fail.Best practice suggests that you should either:
(a) set this to a short duration (90 - 120 days) and have automatic processes
to generate a new certificate before the old one expires, or
(b) set it to a longer duration (3 - 5 years) and then perform a manual update
a few months before it expires.You may enter the validity period in years (e.g. 3Y), months (e.g. 18M), or days (e.g. 90D)For how long should your certificate be valid? [5y] 5y #填过期时间## Do you wish to generate one certificate per node?If you have multiple nodes in your cluster, then you may choose to generate a
separate certificate for each of these nodes. Each certificate will have its
own private key, and will be issued for a specific hostname or IP address.Alternatively, you may wish to generate a single certificate that is valid
across all the hostnames or addresses in your cluster.If all of your nodes will be accessed through a single domain
(e.g. node01.es.example.com, node02.es.example.com, etc) then you may find it
simpler to generate one certificate with a wildcard hostname (*.es.example.com)
and use that across all of your nodes.However, if you do not have a common domain name, and you expect to add
additional nodes to your cluster in the future, then you should generate a
certificate per node so that you can more easily generate new certificates when
you provision new nodes.Generate a certificate per node? [y/N]y   #添加节点了## What is the name of node #1?This name will be used as part of the certificate file name, and as a
descriptive name within the certificate.You can use any descriptive name that you like, but we recommend using the name
of the Elasticsearch node.node #1 name: es-master #单机的话就取个配置文件中的主节点名称,保持一致## Which hostnames will be used to connect to es-master?These hostnames will be added as "DNS" names in the "Subject Alternative Name"
(SAN) field in your certificate.You should list every hostname and variant that people will use to connect to
your cluster over http.
Do not list IP addresses here, you will be asked to enter them later.If you wish to use a wildcard certificate (for example *.es.example.com) you
can enter that here.Enter all the hostnames that you need, one per line.
When you are done, press <ENTER> once more to move on to the next step.www.myes.com #填连接到node的主机名
192.168.1.200You entered the following hostnames.- www.myes.comIs this correct [Y/n]Y## Which IP addresses will be used to connect to es-master?If your clients will ever connect to your nodes by numeric IP address, then you
can list these as valid IP "Subject Alternative Name" (SAN) fields in your
certificate.If you do not have fixed IP addresses, or not wish to support direct IP access
to your cluster then you can just press <ENTER> to skip this step.Enter all the IP addresses that you need, one per line.
When you are done, press <ENTER> once more to move on to the next step.192.168.1.200 #填连接到node的ip,如果没有固定ip获取,不希望ip访问就回车跳过You entered the following IP addresses.- 192.168.1.200Is this correct [Y/n]Y## Other certificate optionsThe generated certificate will have the following additional configuration
values. These values have been selected based on a combination of the
information you have provided above and secure defaults. You should not need to
change these values unless you have specific requirements.Key Name: es-master
Subject DN: CN=es-master
Key Size: 2048Do you wish to change any of these options? [y/N]N #还改不改这些选项
Generate additional certificates? [Y/n]N #还生成其他证书吗?一般集群用## What password do you want for your private key(s)?Your private key(s) will be stored in a PKCS#12 keystore file named "http.p12".
This type of keystore is always password protected, but it is possible to use a
blank password.If you wish to use a blank password, simply press <enter> at the prompt below.
Provide a password for the "http.p12" file:  [<ENTER> for none]#添加http.p12证书密码
Repeat password to confirm:  #确认密码## Where should we save the generated files?A number of files will be generated including your private key(s),
public certificate(s), and sample configuration options for Elastic Stack products.These files will be included in a single zip archive.What filename should be used for the output zip file? [/usr/share/elasticsearch/elasticsearch-ssl-http.zip] Zip file written to /usr/share/elasticsearch/elasticsearch-ssl-http.zip

 解压文件,生成一个文件夹,里面包含两个文件夹:

  • elasticsearch文件夹包含http.p12及elasticsearch.yml的配置参考

  • kibana文件夹包含elasticsearch-ca.pem及kibana.yml的配置参考

elasticsearch@master01:~$ unzip elasticsearch-ssl-http.zip 
Archive:  elasticsearch-ssl-http.zipcreating: elasticsearch/inflating: elasticsearch/README.txt  inflating: elasticsearch/http.p12  inflating: elasticsearch/sample-elasticsearch.yml  creating: kibana/inflating: kibana/README.txt       inflating: kibana/elasticsearch-ca.pem  inflating: kibana/sample-kibana.yml  
elasticsearch@master01:~$ ls -l elasticsearch
total 12
-rw-r--r-- 1 elasticsearch root 1378 Aug 21 13:28 README.txt
-rw-r--r-- 1 elasticsearch root 3636 Aug 21 13:28 http.p12
-rw-r--r-- 1 elasticsearch root  858 Aug 21 13:28 sample-elasticsearch.yml
#拷贝到config下
elasticsearch@master01:~$ cp elasticsearch/http.p12 config/
elasticsearch@master01:~$ ls -l config/
total 72
-rw-rw-r-- 1 root          root  1042 Aug  5 10:11 elasticsearch-plugins.example.yml
-rw-rw---- 1 elasticsearch root   425 Aug 22 05:52 elasticsearch.keystore
-rwxrwxrwx 1          1001 1001   581 Aug 22 06:28 elasticsearch.yml
-rw------- 1 elasticsearch root  3596 Aug 22 05:31 es-cert.p12
-rw-r--r-- 1 elasticsearch root  3652 Aug 22 06:30 http.p12
-rw-rw-r-- 1 root          root  2727 Aug  5 10:11 jvm.options
drwxrwxr-x 1 elasticsearch root  4096 Aug  5 10:11 jvm.options.d
-rw-rw-r-- 1 root          root 17969 Aug  5 10:11 log4j2.file.properties
-rw-rw-r-- 1 root          root 12549 Aug  5 10:11 log4j2.properties
-rw-rw-r-- 1 root          root   473 Aug  5 10:11 role_mapping.yml
-rw-rw-r-- 1 root          root   197 Aug  5 10:11 roles.yml
-rw-rw-r-- 1 root          root     0 Aug  5 10:11 users
-rw-rw-r-- 1 root          root     0 Aug  5 10:11 users_roles

后者kibana目录,其中包含一个elasticsearch-ca.pem文件。主要用于配置Kibana,使其信任HTTP层的Elasticsearch CA。两个目录下都给出了具体的配置方式:

elasticsearch@master01:~$ cat elasticsearch/sample-elasticsearch.yml 
#
# SAMPLE ELASTICSEARCH CONFIGURATION FOR ENABLING SSL ON THE HTTP INTERFACE
#
# This is a sample configuration snippet for Elasticsearch that enables and configures SSL for the HTTP (Rest) interface
#
# This was automatically generated at: 2024-08-22 05:47:20Z
# This configuration was intended for Elasticsearch version 8.15.0
#
# You should review these settings, and then update the main configuration file at
#   /usr/share/elasticsearch/config/elasticsearch.yml
## This turns on SSL for the HTTP (Rest) interface
xpack.security.http.ssl.enabled: true# This configures the keystore to use for SSL on HTTP
# Because your keystore has a password, you will also need to add the password to the Elasticsearch keystore
#    elasticsearch-keystore add "xpack.security.http.ssl.keystore.secure_password"
xpack.security.http.ssl.keystore.path: "http.p12"
elasticsearch@master01:~$ cat kibana/sample-kibana.yml 
#
# SAMPLE KIBANA CONFIGURATION FOR ENABLING SSL TO ELASTICSEARCH
#
# This is a sample configuration snippet for Kibana that configures SSL for connections to Elasticsearch
#
# This was automatically generated at: 2024-08-22 05:47:20Z
# This configuration was intended for version 8.15.0
#
# You should review these settings, and then update the main kibana.yml configuration file.
#
#-------------------------------------------------------------------------------------------------
#  You also need to update the URLs in your "elasticsearch.hosts" setting to use the "https" URL.
#  e.g. If your kibana.yml file currently has
#
#  elasticsearch.hosts: [ "http://localhost:9200" ]
#
#  then you should change this to:
#
#  elasticsearch.hosts: [ "https://localhost:9200" ]
#
#-------------------------------------------------------------------------------------------------# This configures Kibana to trust a specific Certificate Authority for connections to Elasticsearch
elasticsearch.ssl.certificateAuthorities: [ "config/elasticsearch-ca.pem" ]

因此生成的kibana的文件信息建议拷贝到容器外面的kibana目录下,后面方便使用。

root@master01:/data/elk/kibana/config# docker cp es:/usr/share/elasticsearch/kibana/elasticsearch-ca.pem /data/elk/kibana/config/Successfully copied 3.07kB to /data/elk/kibana/config/
root@master01:/data/elk/kibana/config# docker cp es:/usr/share/elasticsearch/kibana/sample-kibana.yml /data/elk/kibana/config/Successfully copied 3.07kB to /data/elk/kibana/config/
root@master01:/data/elk/kibana/config# ls
elasticsearch-ca.pem  kibana.yml  sample-kibana.yml

现在可以验证一下证书信息:

elasticsearch@master01:~$ jdk/bin/keytool -keystore elasticsearch/http.p12 -list
Enter keystore password:  
Keystore type: PKCS12
Keystore provider: SUNYour keystore contains 2 entriesca, Aug 21, 2024, trustedCertEntry, 
Certificate fingerprint (SHA-256): 60:95:CD:3B:4E:A0:D7:43:13:C2:F1:D9:11:B1:AA:B8:02:BB:2D:0E:3E:C5:CE:82:F5:8A:D7:49:99:A5:70:A7
http, Aug 21, 2024, PrivateKeyEntry, 
Certificate fingerprint (SHA-256): 78:48:07:F3:C8:1B:50:08:72:65:4A:19:F4:23:26:0D:BA:7F:1F:BE:11:87:74:8E:82:B7:27:D5:04:B4:03:8B
#添加http.p12密码到密钥库
elasticsearch@master01:~$ ./bin/elasticsearch-keystore add xpack.security.http.ssl.keystore.secure_password
Enter value for xpack.security.http.ssl.keystore.secure_password:
(4)完整配置ES

将http.p12证书放到配置文件内,重新更新配置文件并重启ES:

elasticsearch@master01:/data/elk/es$  cat es/config/elasticsearch.yml 
#集群名称
cluster.name: "es-master"
# 0.0.0.0为不限制,生产环境请设置为固定IP
network.host: 192.168.1.200
#设置对外服务的http端口,默认为9200
http.port: 9200
search.allow_expensive_queries: true
http.cors.enabled: true
#允许REST请求来自何处
http.cors.allow-origin: "*"
# 开启x-pack安全验证 访问时需要密码
xpack.security:enabled: true
#generater kibana token,一般配合es的自动配置使用
#  enrollment.enabled: true
#用于在传输网络层上启用或禁用 TLS/SSL,节点使用该层相互通信。 默认值为 。falsetransport.ssl:enabled: trueverification_mode: certificate
#full:验证提供的证书:是否具有颁发日期且在日期内;链接到受信任的证书权威(CA);检查证书。
#certificate:验证提供的证书,并验证它是否由受信任的颁发机构 (CA),但不检查证书。
#none:不执行证书验证client_authentication: requiredkeystore.path: es-cert.p12truststore.path: es-cert.p12
# Enable encryption for HTTP API client connections, such as Kibana, Logstashhttp.ssl:enabled: trueverification_mode: certificatekeystore.path: http.p12

最后就可以通过https+ip:端口以密码的形式访问ES了。

然后就可以进入kibana页面进行es连接配置了。可以通过es获取注册令牌进行配置:  

也可以直接手动配置:

这里我们没有填写es配置情况下可以直接进行手动配置:

  1. 填写es的地址,笔者的是https:192.168.31.133:9200(没有配置https也可用http的)

  2. 输入kibana_system的密码

  3. 之后界面会提示我们通过一个命令获取验证码并填写,进入kibana容器按要求获取填写即可。  

root@master01:/data/elk/kibana/config# docker exec -i kibana  bin/kibana-verification-code
Kibana is currently running with legacy OpenSSL providers enabled! For details and instructions on how to disable see https://www.elastic.co/guide/en/kibana/8.15/production.html#openssl-legacy-provider
Your verification code is:  920 675 

 然后静等配置完成即可重新访问kibana可视化界面了。

如果登录不上可根据kibana日志和es日志一起解决。比如笔者使用的时候因为虚拟机内存不够导致ElasticSerach 出现 high disk watermark [90%]出现磁盘内存不足的问题,导致kibana登录不上。后面在elasticsearch.yml上配置cluster.routing.allocation.disk.threshold_enabled: false解决了。所以如果有问题,咱们多看日志都是可以认证登录成功的。

此时查看一下本地的kibana配置文件可以发现,之前kibana配置中注销的es配置信息已经自动生成了。

root@master01:/data/elk/kibana/config# cat kibana.yml 
server.name: kibana
server.port: 5601
server.host: "0.0.0.0"
xpack.monitoring.ui.container.elasticsearch.enabled: true
telemetry.enabled: false
i18n.locale: "zh-CN"# This section was automatically generated during setup.
elasticsearch.hosts: ['https://192.168.1.200:9200']
elasticsearch.username: kibana_system
elasticsearch.password: elastic
elasticsearch.ssl.certificateAuthorities: [/usr/share/kibana/data/ca_1724313143926.crt]
xpack.fleet.outputs: [{id: fleet-default-output, name: default, is_default: true, is_default_monitoring: true, type: elasticsearch, hosts: ['https://192.168.1.200:9200'], ca_trusted_fingerprint: 510c488576597352b09386b903a90e0c6c0ea030daa3328edb386a49298e7c1e}]

三、Kibana 安全配置

这里笔者以es内部签名的证书来生成kibana的认证,但是官方也说到了,对于开发环境和构建概念证明是可以接受,但不应该在生产环境中使用。在投入生产之前,需要使用可信CA(如Let’s Encrypt)或组织的内部CA对证书进行签名。使用签名证书为Kibana内部访问或公共互联网的连接建立浏览器信任。毕竟这块我们没买正经证书,所以勉强把流程介绍一下吧。

首先我们需要在es中使用工具使用如下的命令为 Kibana 生成服务器证书和私钥:

#根据证书适配的ip生成,也可使用-dns形式的-dns 域名1,域名2
elasticsearch@master01:~$ bin/elasticsearch-certutil csr -name kibana -ip 192.168.1.200
This tool assists you in the generation of X.509 certificates and certificate
signing requests for use with SSL/TLS in the Elastic stack.The 'csr' mode generates certificate signing requests that can be sent to
a trusted certificate authority* By default, this generates a single CSR for a single instance.* You can use the '-multiple' option to generate CSRs for multipleinstances, each with their own private key.* The '-in' option allows for the CSR generation to be automatedby describing the details of each instance in a YAML file* An instance is any piece of the Elastic Stack that requires an SSL certificate.Depending on your configuration, Elasticsearch, Logstash, Kibana, and Beatsmay all require a certificate and private key.* The minimum required value for each instance is a name. This can simply be thehostname, which will be used as the Common Name of the certificate. A fulldistinguished name may also be used.* A filename value may be required for each instance. This is necessary when thename would result in an invalid file or directory name. The name provided hereis used as the directory name (within the zip) and the prefix for the key andcertificate files. The filename is required if you are prompted and the nameis not displayed in the prompt.* IP addresses and DNS names are optional. Multiple values can be specified as acomma separated string. If no IP addresses or DNS names are provided, you maydisable hostname verification in your SSL configuration.The 'csr' mode produces a single zip file which contains the certificate
signing requests and private keys for each instance.* Each certificate signing request is provided as a standard PEM encoding of a PKCS#10 CSR.* Each key is provided as a PEM encoding of an RSA private keyPlease enter the desired output file [csr-bundle.zip]: Certificate signing requests have been written to /usr/share/elasticsearch/csr-bundle.zipThis file should be properly secured as it contains the private keys for all
instances.After unzipping the file, there will be a directory for each instance containing
the certificate signing request and the private key. Provide the certificate
signing requests to your certificate authority. Once you have received the
signed certificate, copy the signed certificate, key, and CA certificate to the
configuration directory of the Elastic product that they will be used for and
follow the SSL configuration instructions in the product guide.
elasticsearch@master01:~$ ls -l
total 2308
-r--r--r--  1 root          root    3860 Aug  5 10:11 LICENSE.txt
-r--r--r--  1 root          root 2285006 Aug  5 10:11 NOTICE.txt
-r--r--r--  1 root          root    9111 Aug  5 10:11 README.asciidoc
drwxrwxr-x  1 elasticsearch root    4096 Aug  5 10:12 bin
drwxrwxr-x  1 elasticsearch root    4096 Aug 22 09:24 config
-rw-------  1 elasticsearch root    2392 Aug 22 09:41 csr-bundle.zip
drwxrwxrwx  5          1001 1001    4096 Aug 22 09:41 data
drwxr-xr-x  2 elasticsearch root    4096 Aug 22 05:47 elasticsearch
-rw-------  1 elasticsearch root    7605 Aug 22 05:47 elasticsearch-ssl-http.zip
-rw-------  1 elasticsearch root    2672 Aug 22 05:05 es-ca.p12
-rw-------  1 elasticsearch root    3596 Aug 22 05:06 es-cert.p12
dr-xr-xr-x  1 root          root    4096 Aug  5 10:11 jdk
drwxr-xr-x  2 elasticsearch root    4096 Aug 22 05:47 kibana
dr-xr-xr-x  6 root          root    4096 Aug  5 10:11 lib
drwxrwxrwx  2          1001 1001    4096 Aug 22 09:24 logs
dr-xr-xr-x 83 root          root    4096 Aug  5 10:11 modules
drwxrwxr-x  1 elasticsearch root    4096 Aug  5 10:11 plugins

执行完成后会生成一个叫做 csr-bundle.zip 的文件,解压后的到kibana.csr(未签名安全证书),kibana.key(密钥未加密的私钥)文件。

elasticsearch@master01:~$ unzip csr-bundle.zip 
Archive:  csr-bundle.zipinflating: kibana/kibana.csr       inflating: kibana/kibana.key       
elasticsearch@master01:~$ ls -l kibana/
total 20
-rw-r--r-- 1 elasticsearch root 1306 Aug 22 05:47 README.txt
-rw-r--r-- 1 elasticsearch root 1200 Aug 22 05:47 elasticsearch-ca.pem
-rw-r--r-- 1 elasticsearch root  932 Aug 22 09:41 kibana.csr
-rw-r--r-- 1 elasticsearch root 1675 Aug 22 09:41 kibana.key
-rw-r--r-- 1 elasticsearch root 1052 Aug 22 05:47 sample-kibana.yml

然后用这两个文件向您的内部CA或受信任的CA请求进行签名,以获得已签名的证书。签名的文件可以是不同的格式,例如.crt文件,如kibana-server.crt。这里我们用openssl通过命令生成kibana.crt:

elasticsearch@master01:~$ cd kibana/
elasticsearch@master01:~/kibana$ openssl x509 -req -in kibana.csr -signkey kibana.key -out kibana.crt
Signature ok
subject=CN = kibana
Getting Private key
elasticsearch@master01:~/kibana$ ls -l
total 24
-rw-r--r-- 1 elasticsearch root 1306 Aug 22 05:47 README.txt
-rw-r--r-- 1 elasticsearch root 1200 Aug 22 05:47 elasticsearch-ca.pem
-rw-r--r-- 1 elasticsearch root  985 Aug 22 09:48 kibana.crt
-rw-r--r-- 1 elasticsearch root  932 Aug 22 09:41 kibana.csr
-rw-r--r-- 1 elasticsearch root 1675 Aug 22 09:41 kibana.key
-rw-r--r-- 1 elasticsearch root 1052 Aug 22 05:47 sample-kibana.yml
elasticsearch@master01:/data/elk/es$ su
密码: 
root@master01:/data/elk/kibana/config# ls
elasticsearch-ca.pem  kibana.yml  sample-kibana.yml
root@master01:/data/elk/kibana/config# docker cp es:/usr/share/elasticsearch/kibana/kibana.crt ./Successfully copied 2.56kB to /data/elk/kibana/config/./
root@master01:/data/elk/kibana/config# docker cp es:/usr/share/elasticsearch/kibana/kibana.key ./Successfully copied 3.58kB to /data/elk/kibana/config/./
root@master01:/data/elk/kibana/config# ls -l
总计 20
-rw-r--r-- 1 root root 1200  8月 22 13:47 elasticsearch-ca.pem
-rw-r--r-- 1 root root  985  8月 22 17:48 kibana.crt
-rw-r--r-- 1 root root 1675  8月 22 17:41 kibana.key
-rwxrwxrwx 1 root root  697  8月 22 17:28 kibana.yml
-rw-r--r-- 1 root root 1052  8月 22 13:47 sample-kibana.yml

接下来在 Kibana 的配置文件 kibana.yml 中添加如下的配置:

server.ssl:enbled: truecertificate: kibana.crtkey: kibana.key

然后重启kibana,却发现kibana控制台会一直报这个问题:no such file or directory, open 'kibana.key'

但是这个文件实际上是存在的,于是笔者尝试把kibana的这两个文件放在容器外的kibana/config配置目录下,并给足777的权限,并将kibana.yml配置文件中的crt和key文件用本地全路径名显示,然后重启~


2024-08-22T10:29:13.994158970Z Error: ENOENT: no such file or directory, open '/data/elk/kibana/config/kibana.key'2024-08-22T10:29:13.994161535Z     at readFileSync (node:fs:448:20)2024-08-22T10:29:13.994163709Z     at readFile (/usr/share/kibana/node_modules/@kbn/server-http-tools/src/ssl/ssl_config.js:156:47)2024-08-22T10:29:13.994165853Z     at new SslConfig (/usr/share/kibana/node_modules/@kbn/server-http-tools/src/ssl/ssl_config.js:111:18)2024-08-22T10:29:13.994167987Z     at new HttpConfig (/usr/share/kibana/node_modules/@kbn/core-http-server-internal/src/http_config.js:356:16)2024-08-22T10:29:13.994170132Z     at /usr/share/kibana/node_modules/@kbn/core-http-server-internal/src/http_service.js:51:1632024-08-22T10:29:13.994172215Z     at /usr/share/kibana/node_modules/rxjs/dist/cjs/internal/operators/map.js:10:372024-08-22T10:29:13.994174299Z     at OperatorSubscriber._this._next (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/operators/OperatorSubscriber.js:33:21)2024-08-22T10:29:13.994176464Z     at OperatorSubscriber.Subscriber.next (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Subscriber.js:51:18)2024-08-22T10:29:13.994178598Z     at /usr/share/kibana/node_modules/rxjs/dist/cjs/internal/observable/combineLatest.js:51:402024-08-22T10:29:13.994180702Z     at OperatorSubscriber._this._next (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/operators/OperatorSubscriber.js:33:21)2024-08-22T10:29:13.994182826Z     at OperatorSubscriber.Subscriber.next (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Subscriber.js:51:18)2024-08-22T10:29:13.994184950Z     at /usr/share/kibana/node_modules/rxjs/dist/cjs/internal/operators/map.js:10:242024-08-22T10:29:13.994187034Z     at OperatorSubscriber._this._next (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/operators/OperatorSubscriber.js:33:21)2024-08-22T10:29:13.994189178Z     at OperatorSubscriber.Subscriber.next (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Subscriber.js:51:18)2024-08-22T10:29:13.994191282Z     at /usr/share/kibana/node_modules/rxjs/dist/cjs/internal/operators/distinctUntilChanged.js:18:282024-08-22T10:29:13.994193386Z     at OperatorSubscriber._this._next (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/operators/OperatorSubscriber.js:33:21)2024-08-22T10:29:13.994195510Z     at OperatorSubscriber.Subscriber.next (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Subscriber.js:51:18)2024-08-22T10:29:13.994198405Z     at /usr/share/kibana/node_modules/rxjs/dist/cjs/internal/operators/map.js:10:242024-08-22T10:29:13.994200539Z     at OperatorSubscriber._this._next (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/operators/OperatorSubscriber.js:33:21)2024-08-22T10:29:13.994202673Z     at OperatorSubscriber.Subscriber.next (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Subscriber.js:51:18)2024-08-22T10:29:13.994204797Z     at ReplaySubject._subscribe (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/ReplaySubject.js:54:24)2024-08-22T10:29:13.994218644Z     at ReplaySubject.Observable._trySubscribe (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Observable.js:41:25)2024-08-22T10:29:13.994220918Z     at ReplaySubject.Subject._trySubscribe (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Subject.js:123:47)2024-08-22T10:29:13.994223072Z     at /usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Observable.js:35:312024-08-22T10:29:13.994225156Z     at Object.errorContext (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/util/errorContext.js:22:9)2024-08-22T10:29:13.994227260Z     at ReplaySubject.Observable.subscribe (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Observable.js:26:24)2024-08-22T10:29:13.994229354Z     at /usr/share/kibana/node_modules/rxjs/dist/cjs/internal/operators/share.js:65:182024-08-22T10:29:13.994231428Z     at OperatorSubscriber.<anonymous> (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/util/lift.js:14:28)2024-08-22T10:29:13.994233963Z     at /usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Observable.js:30:302024-08-22T10:29:13.994236077Z     at Object.errorContext (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/util/errorContext.js:22:9)2024-08-22T10:29:13.994238191Z     at Observable.subscribe (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Observable.js:26:24)2024-08-22T10:29:13.994240335Z     at /usr/share/kibana/node_modules/rxjs/dist/cjs/internal/operators/map.js:9:162024-08-22T10:29:13.994242399Z     at OperatorSubscriber.<anonymous> (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/util/lift.js:14:28)2024-08-22T10:29:13.994244583Z     at /usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Observable.js:30:302024-08-22T10:29:13.994246647Z     at Object.errorContext (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/util/errorContext.js:22:9)2024-08-22T10:29:13.994248771Z     at Observable.subscribe (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Observable.js:26:24)2024-08-22T10:29:13.994250875Z     at /usr/share/kibana/node_modules/rxjs/dist/cjs/internal/operators/distinctUntilChanged.js:13:162024-08-22T10:29:13.994253179Z     at OperatorSubscriber.<anonymous> (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/util/lift.js:14:28)2024-08-22T10:29:13.994255343Z     at /usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Observable.js:30:302024-08-22T10:29:13.994257447Z     at Object.errorContext (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/util/errorContext.js:22:9)2024-08-22T10:29:13.994259561Z     at Observable.subscribe (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Observable.js:26:24)2024-08-22T10:29:13.994261665Z     at /usr/share/kibana/node_modules/rxjs/dist/cjs/internal/operators/map.js:9:162024-08-22T10:29:13.994263729Z     at OperatorSubscriber.<anonymous> (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/util/lift.js:14:28)2024-08-22T10:29:13.994265873Z     at /usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Observable.js:30:302024-08-22T10:29:13.994267947Z     at Object.errorContext (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/util/errorContext.js:22:9)2024-08-22T10:29:13.994273688Z     at Observable.subscribe (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/Observable.js:26:24)2024-08-22T10:29:13.994275882Z     at /usr/share/kibana/node_modules/rxjs/dist/cjs/internal/observable/combineLatest.js:44:282024-08-22T10:29:13.994277996Z     at maybeSchedule (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/observable/combineLatest.js:72:9)2024-08-22T10:29:13.994280110Z     at _loop_1 (/usr/share/kibana/node_modules/rxjs/dist/cjs/internal/observable/combineLatest.js:41:17)2024-08-22T10:29:13.994282224Z     at /usr/share/kibana/node_modules/rxjs/dist/cjs/internal/observable/combineLatest.js:61:172024-08-22T10:29:13.995961809Z 2024-08-22T10:29:13.995983350Z  FATAL  Error: ENOENT: no such file or directory, open '/data/elk/kibana/config/kibana.key'

 仍然不行,突然想起当初在kibana容器内部生成后没有cp到容器内的config目录下,而是拷贝出来了。所以那里没有文件,所以笔者考虑先拷贝进去重启试试:

root@master01:/data/elk/kibana/config# docker exec -i kibana ls -l config
total 8
-rwxrwxrwx 1 root   root 775 Aug 22 09:54 kibana.yml
-rw-rw-r-- 1 kibana root 447 Aug  5 11:20 node.options
root@master01:/data/elk/kibana/config# docker cp kibana.key kibana:/usr/share/kibana/configSuccessfully copied 3.58kB to kibana:/usr/share/kibana/config
root@master01:/data/elk/kibana/config# docker cp kibana.crt kibana:/usr/share/kibana/configSuccessfully copied 2.56kB to kibana:/usr/share/kibana/config
root@master01:/data/elk/kibana/config# docker exec -i kibana ls -l config
total 16
-rw-r--r-- 1 root   root  985 Aug 22 09:48 kibana.crt
-rwxrwxrwx 1 root   root 1675 Aug 22 09:41 kibana.key
-rwxrwxrwx 1 root   root  775 Aug 22 09:54 kibana.yml
-rw-rw-r-- 1 kibana root  447 Aug  5 11:20 node.options

但是还是不对,仍然报错:

最后只有最后一个办法,将那两个文件全用容器内的绝对路径地址在kibana.yml文件中标识。

server.name: kibana
server.port: 5601
server.host: "0.0.0.0"
xpack.monitoring.ui.container.elasticsearch.enabled: true
telemetry.enabled: false
i18n.locale: "zh-CN"# This section was automatically generated during setup.
elasticsearch.hosts: ['https://192.168.1.200:9200']
elasticsearch.username: kibana_system
elasticsearch.password: elastic
elasticsearch.ssl.certificateAuthorities: [/usr/share/kibana/data/ca_1724318819681.crt]
xpack.fleet.outputs: [{id: fleet-default-output, name: default, is_default: true, is_default_monitoring: true, type: elasticsearch, hosts: ['https://192.168.1.200:9200'], ca_trusted_fingerprint: 510c488576597352b09386b903a90e0c6c0ea030daa3328edb386a49298e7c1e}]server.ssl:enabled: truecertificate: /usr/share/kibana/config/kibana.crtkey: /usr/share/kibana/config/kibana.key

 得以解决。然后就能以https的形式访问kibana界面了~

四、Logstash配置补充

当我们在自己的硬件上运行Elasticsearch,并使用Elasticsearch集群的默认自签名证书,则需要以下步骤,以在Logstash和Elasticsearch之间建立安全通信。

首先需要将elasticsearch生成的部分证书文件从es容器内传到logstash的配置文件区。这里我们用的p12生成方式,所以包含es-cert.p12证书和http.p12证书。如果用的pem,那么就是crt的。

elasticsearch@master01:/root$ sudo docker cp es:/usr/share/elasticsearch/config/es-cert.p12 /data/elk/logstash/config
[sudo] elasticsearch 的密码: Successfully copied 5.63kB to /data/elk/logstash/config
elasticsearch@master01:/root$ sudo docker cp es:/usr/share/elasticsearch/config/http.p12 /data/elk/logstash/configSuccessfully copied 5.63kB to /data/elk/logstash/config
root@master01:/data/elk/logstash/config# chmod 777 es-cert.p12 http.p12 
root@master01:/data/elk/logstash/config# ls -l
总计 20
-rwxrwxrwx 1 root root 3596  8月 22 13:31 es-cert.p12
-rwxrwxrwx 1 root root 3652  8月 22 16:46 http.p12
-rwxrwxrwx 1 root root   18  8月 18 13:00 jvm.options
-rwxrwxrwx 1 root root   60  8月 20 14:22 logstash.yml
-rwxrwxrwx 1 root root   66  8月 22 19:18 pipelines.yml

 然后修改管道配置文件中的output的es配置,添加ssl:

root@master01:/data/elk/logstash/config# vi ../pipeline/pipeline-springboot-log.conf 
root@master01:/data/elk/logstash/config# cat ../pipeline/pipeline-springboot-log.conf 
# 输入配置
input {
#  beats {
#    port => 5044
#    client_inactivity_timeout => 36000
#  }redis {host => "192.168.1.200"port => "6379"data_type => "list"key => "filebeat-redis"batch_count => "100"db => "1"}
}# 过滤配置
filter {grok {match => { "message" => "%{SYSLOGTIMESTAMP:syslog_timestamp} %{SYSLOGHOST:syslog_hostname} %{DATA:syslog_program}(?:$%{POSINT:syslog_pid}$)?: %{GREEDYDATA:syslog_message}" }}date {match => [ "syslog_timestamp", "MMM  d HH:mm:ss", "MMM dd HH:mm:ss" ]}
}# 输出配置
output {elasticsearch {hosts => ["https://192.168.1.200:9200"]user => "elastic"password => "elastic"ssl => truessl_certificate_verification =>truekeystore => "/usr/share/logstash/config/http.p12"keystore_password => "elastic"truststore => "/usr/share/logstash/config/es-cert.p12"truststore_password => "elastic"index => "logstash-addssl-%{+YYYY.MM.dd}"}stdout {codec => rubydebug}
}root@master01:/data/elk/logstash/config# docker restart logstash
logstash

配置说明

  • hosts:Elasticsearch的地址,使用HTTPS协议。

  • userpassword:Logstash连接Elasticsearch时使用的用户名和密码。

  • ssl:启用SSL。

  • ssl_certificate_verification:启用证书验证。

  • keystorekeystore_password:Logstash使用的密钥库文件路径和密码。

  • truststoretruststore_password:Logstash使用的信任库文件路径和密码。

最后等待运行成功即可。有日志文件更新后便能在kibana中收集到最新的日志信息了:

五、后记

至于最后的Filebeat,由于不会直面kibana和ElasticSearch,因此也就没有配置的必要了。到此为止,整个日志系统的基础安全认证设置流程就结束了。当然这只是一个模拟ELFK搭建的配置情况,并没有涉及到集群管理,正式环境上可能面对的问题会更多,多看日志结合官方文档查找即可。如果不足之处,欢迎指正~  

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处:http://www.mzph.cn/bicheng/52533.shtml

如若内容造成侵权/违法违规/事实不符,请联系多彩编程网进行投诉反馈email:809451989@qq.com,一经查实,立即删除!

相关文章

docker镜像,ip,端口映射,持久化

docker 镜像的迁移&#xff1a;导出和导入镜像 查看镜像&#xff1a; [rootdocker ~]# docker images REPOSITORY TAG IMAGE ID CREATED SIZE centos latest 5d0da3dc9764 2 years ago 231MB 打包 将镜像打包&#xff0c;找到save,可以将…

【非常困难】 猿人学web第一届 第10题 js 混淆 - 重放攻击对抗

文章目录 调试干扰第一个 debuggerHook 代码 第二个 debuggerHook 代码 第三个 Function.constructor.prototype 检测Hook 代码 完整的 Hook 代码 接口分析加密参数 m 生成位置加密参数还原加密点扣代码提示_yrxyA\$()var _yrxmEu _yrxWKg(_yrxyHJ...._yrxWKg() let result _…

半枚玄月照见人间空荡荡

半枚玄月照见人间空荡荡 昨夜玄月昨夜风&#xff0c;轻吹往事落心中。 众里寻他为何事&#xff1f;鸡鸣月落一场空。玄月 沙发上刷短视频笑得不经意抬头&#xff0c;忽而瞥见窗口防盗网挂着半枚月亮&#xff0c;玄黄色的&#xff0c;温润而冷冽&#xff0c;引人注目。 手机里…

国货之光|暴雨机推出面向大模型训练的AI服务器

当前&#xff0c;“百模大战”带来了算力需求的爆发&#xff0c;尤其是以ChatGPT为代表的多模态AI大模型&#xff0c;‌其参数规模和训练数据量均达到了前所未有的规模。‌GPT-3.5、‌GPT-4等模型的参数规模突破了万亿级别&#xff0c;‌训练数据量达到了TB级别&#xff0c;‌这…

zdppy+vue3+onlyoffice文档管理系统实战 20240823上课笔记 zdppy_cache框架的低代码实现

遗留问题 1、封装API2、有账号密码3、查询所有有效的具体数据&#xff0c;也就是缓存的所有字段 封装查询所有有效具体数据的方法 基本封装 def get_all(self, is_activeTrue, limit100000):"""遍历数据库中所有的key&#xff0c;默认查询所有没过期的:para…

51单片机——LED灯控制

1、LED介绍 中文名&#xff1a;发光二极管 外文名&#xff1a;Light Emitting Diode 简称&#xff1a;LED 用途&#xff1a;照明、广告灯、指引灯、屏幕 2、LED原理图 电阻在原理图上标注为1k&#xff0c;表示这是1千欧的电阻&#xff0c;实际在电路板上的表示是102 102解…

Godot《躲避小兵》实战之创建游戏主场景

游戏主场景 现在是时候将我们所做的一切整合到一个可玩的游戏场景中了。 创建新场景并添加一个 Node节点&#xff0c;命名为 Main。&#xff08;我们之所以使用 Node 而不是 Node2D&#xff0c;是因为这个节点会作为处理游戏逻辑的容器使用。本身是不需要 2D 功能的。&#x…

C\C++ Sqlite3使用详解

C\C++ Sqlite3使用详解 一、源码下载二、sqlite3接口说明C++2.1 项目创建以及sqlite3使用2.1 连接数据库2.2 sqlite创建表2.2.1 示例代码2.2.2 注意事项2.3 sqlite插入数据2.3.1 示例代码2.3.2 注意事项2.4 sqlite数据删除2.5 sqlite数据查询一、源码下载 下载地址: https://…

oneapi 获取通义千问模型密钥

1、打开 阿里云百炼大模型平台&#xff0c;点击开通&#xff0c;登录账号 2、获取密钥 3、查看模型名称&#xff0c;可以添加到 oneapi 的渠道中 别忘了添加向量模型

python库(21):

1 TextBlob简介 TextBlob 是一个基于 Python 的文本处理库&#xff0c;能够让基础的自然语言处理任务变得异常简单。 它提供了一个简单直观的 API&#xff0c;让你能够轻松执行词性标注、名词短语提取、情感分析、文本分类和关键词提取等功能。 值得一提的是&#xff0c;Tex…

[Linux]如何在虚拟机安装Ubuntu?(小白向)

一、我们为什么要在虚拟机中安装Ubuntu? 在虚拟机中安装系统主要是为了让一个系统与我们原本的系统隔离&#xff0c;不管是想运行一些不安全的软件&#xff0c;或者是想运行一些独特的操作系统&#xff0c;我们都可以选择使用虚拟机来安装和隔离这些操作系统。如果你是一位Lin…

跨越语言障碍:2024四款实用在线翻译工具评测!

随着技术的不断进步&#xff0c;各种在线翻译工具层出不穷&#xff0c;帮助我们轻松跨越语言的鸿沟。今天&#xff0c;让我们一起探索几款非常实用的在线翻译工具&#xff01; 福昕在线翻译 直达链接&#xff1a; https://fanyi.pdf365.cn/ 福昕在线翻译是一款专注于文档翻…

【C++】函数模板特化:深度解析与应用场景

&#x1f4e2;博客主页&#xff1a;https://blog.csdn.net/2301_779549673 &#x1f4e2;欢迎点赞 &#x1f44d; 收藏 ⭐留言 &#x1f4dd; 如有错误敬请指正&#xff01; &#x1f4e2;本文由 JohnKi 原创&#xff0c;首发于 CSDN&#x1f649; &#x1f4e2;未来很长&#…

dubbo:dubbo+nacos整合springcloud gateway实现网关(三)

文章目录 0. 引言1. 集成gateway网关1.1 实操步骤1.2 dubbo提供者注册到nacos出现两个实例的问题 2. 源码3. 总结 0. 引言 上次我们讲到使用zookeeper作为注册中心搭建dubbo微服务框架&#xff0c;但是我们还缺少一个服务总入口&#xff0c;也就是我们的网关服务。所以今天我们…

DataWhale AI夏令营-《李宏毅深度学习教程》笔记

DataWhale AI夏令营-《李宏毅深度学习教程》笔记 第三章 深度学习基础补充一些基础临界点及其种类逃离临界点方法批量动量自适应学习率学习率调度 之前一直接触的LLM大模型做一些应用&#xff0c;或者传统的自然语言处理&#xff0c;都是直接拿别人的模型用&#xff0c;要不就是…

k8s 部署Ruoyi-Vue-Plus之vue打包镜像

在这里插入图片描述 在这篇文章中&#xff0c;解释如何通过容器化&#xff08;Docker&#xff09;来打包和部署前端项目&#xff0c;替代之前手动维护版本的方式 1.nginx配置 在 ruoyi-ui 项目的根目录下创建一个 nginx.conf 文件, 我没有使用monitor-admin和xxljob-admin模块…

语言基础/单向链表的构建和使用(含Linux中SLIST的解析和使用)

文章目录 概述简单的链表描述链表的术语简单实现一个单链表 Linux之SLIST机理分析结构定义单链表初始化单链表插入元素单链表遍历元素单链表删除元素 Linux之SLIST使用实践纯C中typedef重命名带来的问题预留 概述 本文讲述了数据结构中单链表的基本概念&#xff0c;头指针、头…

CPP中lamada表达式作用一览[more cpp-6]

一般语法 CPP中的lambda 表达式的本质就是匿名函数&#xff0c;它可以在代码中定义一个临时的、局部的函数.为什么需要lamada表达式&#xff1f; 因为命名是个大问题 想名字以及避免命名冲突是很劳神费力的事&#xff0c;这就是lamada表达式的优点(lamada优点表现为简洁性)总…

如何在不格式化的情况下解锁 Android 智能手机密码

如果您忘记密码&#xff0c;您的 Android 移动设备将锁定您。发生这种情况时&#xff0c;通常可以通过恢复出厂设置来重新获得对设备的访问权限。可悲的是&#xff0c;这将导致所有数据丢失。下面列出的是解锁锁定的Android 手机而不会丢失任何个人数据的有效方法。 Android 手…

Ps:首选项 - 界面

Ps菜单&#xff1a;编辑/首选项 Edit/Preferences 快捷键&#xff1a;Ctrl K Photoshop 首选项中的“界面” Interface选项卡可以定制 Photoshop 的界面外观和行为&#xff0c;从而创建一个最适合自己工作习惯和需求的工作环境。这些设置有助于提高工作效率&#xff0c;减轻眼…