启动流程
嵌入式设备下Linux的内核系统启动的流程并不复杂，从最早的父进程init开始，为创建各种服务进程：系统会从 inittab 文件中，读取每一行作为执行命令👇
# Note: BusyBox init doesn't support runlevels. The runlevels field is completely ignored by BusyBox init. If you want runlevels, use
# sysvinit.
#
# Format for each entry: <id>:<runlevels>:<action>:<process>
#
# id == tty to run on, or empty for /dev/console
# runlevels == ignored
# action == one of sysinit, respawn, askfirst, wait, and once
# process == program to run# Startup the system
::sysinit:/bin/mount -t proc proc /proc
::sysinit:/bin/mount -o remount,ro,noatime /
::sysinit:/bin/mount -t tmpfs tmpfs /dev
::sysinit:/bin/mkdir -p /dev/pts
::sysinit:/bin/mkdir -p /dev/shm
::sysinit:/bin/mount -a
::sysinit:/bin/hostname -F /etc/hostname
# now run any rc scripts
::sysinit:/etc/init.d/rcS# Put a getty on the serial port
ttySLB0::respawn:/sbin/getty -L -n -l /bin/autologin ttySLB0 0 vt100 # GENERIC_SERIAL# Stuff to do for the 3-finger salute
#::ctrlaltdel:/sbin/reboot# Stuff to do before rebooting
::shutdown:/etc/init.d/rcK
::shutdown:/sbin/swapoff -a
::shutdown:/bin/umount -a -r
sysinit即为系统启动时要做的内容
- 挂载目录文件
- 创建目录
- 读取
fstab内容实现自动挂在 - 设置主机名信息
- 到
/etc/init.d目录下指定rcS脚本
rcS 脚本
查看rcS脚本文件，可知，rcS是为了启动 /etc/init.d 目录下一个个以 S 开头的可执行脚本，若不是以sh作为后缀,则执行 并直接传参为 start
#!/bin/sh
# Start all init scripts in /etc/init.d
# executing them in numerical order.
#
for i in /etc/init.d/S??* ;do# Ignore dangling symlinks (if any).[ ! -f "$i" ] && continuecase "$i" in*.sh)# Source shell script for speed.(trap - INT QUIT TSTPset start. $i);;*)# No sh extension, so fork subprocess.$i start;;esac
done
查看S*脚本
# cat S50telnet
#!/bin/sh
# Start telnet....
TELNETD_ARGS=-F
[ -r /etc/default/telnet ] && . /etc/default/telnetstart() {printf "Starting telnetd: "start-stop-daemon -S -q -m -b -p /var/run/telnetd.pid \-x /usr/sbin/telnetd -- $TELNETD_ARGS[ $? = 0 ] && echo "OK" || echo "FAIL"
}stop() {printf "Stopping telnetd: "start-stop-daemon -K -q -p /var/run/telnetd.pid \-x /usr/sbin/telnetd[ $? = 0 ] && echo "OK" || echo "FAIL"
}case "$1" instart)start;;stop)stop;;restart|reload)stopstart;;*)echo "Usage: $0 {start|stop|restart}"exit 1
esacexit $?
脚本中判断传入参数是否为start，以start-stop-daemon 命令启动守护进程。
start-stop-daemon
查看该命令的相关参数,常用的一些参数为👇
start-stop-daemon实现linux下的守护进程👈
# start-stop-daemon --help
Usage: start-stop-daemon [OPTIONS] [-S|-K] ... [-- ARGS...] Search for matching processes, and then
-K: stop all matching processes #停止所有匹配进程
-S: start a process unless a matching process is found #除非找到匹配的进程，否则启动进程Process matching:-u USERNAME|UID Match only this user's processes-n NAME Match processes with NAME in comm field in /proc/PID/stat-x EXECUTABLE Match processes with this command in /proc/PID/cmdline-p FILE Match a process with PID from FILEAll specified conditions must match
-S only:-x EXECUTABLE Program to run #执行命令-a NAME Zeroth argument #第零个参数-b Background #后台执行-N N Change nice level #更改nice等级-c USER[:[GRP]] Change user/group #更改用户组-m Write PID to pidfile specified by -p #将进程的PID写入-p指定的pid文件
-K only:-s SIG Signal to send # 发送信号-t Match only, exit with 0 if found
Other:-o Exit with status 0 if nothing is done-v Verbose-q Quiet #不输出进程信息
一个简单的示例example.sh,来自Debian /etc/init.d/ssh，不过在嵌入式的设备下，start-stop-daemon 源命令程序大多是轻量化裁剪过的，参数用较精简的-s -q -m -p 等即可（👆）
#!/bin/sh
# Quick start-stop-daemon example, derived from Debian /etc/init.d/ssh
set -e# Must be a valid filename
NAME=foo
PIDFILE=/var/run/$NAME.pid
#This is the command to be run, give the full pathname
DAEMON=/usr/local/bin/bar
DAEMON_OPTS="--baz=quux"export PATH="${PATH:+$PATH:}/usr/sbin:/sbin"case "$1" instart)echo -n "Starting daemon: "$NAMEstart-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- $DAEMON_OPTS#无输出启动进程，将其PID存在$PIDFILE文件中，命令跟着的参数是 $DAEMON_OPTSecho ".";;stop)echo -n "Stopping daemon: "$NAMEstart-stop-daemon --stop --quiet --oknodo --pidfile $PIDFILEecho ".";;restart)echo -n "Restarting daemon: "$NAMEstart-stop-daemon --stop --quiet --oknodo --retry 30 --pidfile $PIDFILEstart-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- $DAEMON_OPTSecho ".";;*)echo "Usage: "$1" {start|stop|restart}"exit 1
esacexit 0
)
