具体接口IP地址如下图所示

第一步：配置IP

R1:

[R1]int g 0/0/0
[R1-GigabitEthernet0/0/0]ip ad	
[R1-GigabitEthernet0/0/0]ip address 100.1.1.1 24
Apr 23 2024 19:35:38-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R1-GigabitEthernet0/0/0]qi^
Error:Incomplete command found at '^' position.
[R1-GigabitEthernet0/0/0]q
[R1]int l 0
[R1-LoopBack0]ip ad	
[R1-LoopBack0]ip address 192.168.0.1 32
[R1-LoopBack0]q
[R1]int l 1
[R1-LoopBack1]ip ad	
[R1-LoopBack1]ip address 192.168.1.1/32^
Error: Wrong parameter found at '^' position.
[R1-LoopBack1]ip address 192.168.1.1 32
[R1-LoopBack1]

R2:

[Huawei]sysname R2
[R2]int g 0/0/0
[R2-GigabitEthernet0/0/0]ip ad	
[R2-GigabitEthernet0/0/0]ip address 100.1.1.2 24
Apr 23 2024 19:36:52-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R2-GigabitEthernet0/0/0]q
[R2]int g 0/0/1
[R2-GigabitEthernet0/0/1]ip ad	
[R2-GigabitEthernet0/0/1]ip address 100.2.2.2 24
Apr 23 2024 19:37:14-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R2-GigabitEthernet0/0/1]q
[R2]

R3:

[R3]int g 0/0/0
[R3-GigabitEthernet0/0/0]ip ad	
[R3-GigabitEthernet0/0/0]ip address 100.2.2.3 24
Apr 23 2024 19:37:51-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R3-GigabitEthernet0/0/0]q
[R3]int g 0/0/1
[R3-GigabitEthernet0/0/1]ip ad	
[R3-GigabitEthernet0/0/1]ip address 100.3.3.3 24
Apr 23 2024 19:38:02-08:00 R3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R3-GigabitEthernet0/0/1]q
[R3]int l 0
[R3-LoopBack0]ip ad	
[R3-LoopBack0]ip address 192.168.2.1 32
[R3-LoopBack0]q
[R3]int l 1
[R3-LoopBack1]ip ad	
[R3-LoopBack1]ip address 192.168.3.1 32
[R3-LoopBack1]q
[R3]

R4:

[R4]int g 0/0/0
[R4-GigabitEthernet0/0/0]ip ad	
[R4-GigabitEthernet0/0/0]ip address 100.3.3.4 24
Apr 23 2024 19:38:48-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R4-GigabitEthernet0/0/0]q
[R4]int l 0
[R4-LoopBack0]ip ad	
[R4-LoopBack0]ip address 192.168.4.1 32
[R4-LoopBack0]q
[R4]int l 1
[R4-LoopBack1]ip ad	
[R4-LoopBack1]ip address 192.168.5.1 32
[R4-LoopBack1]q
[R4]

第二步：配置RIP和OSPF

RIP

R1：

[R1]r	
[R1]rip 1
[R1-rip-1]v 2
[R1-rip-1]undo s	
[R1-rip-1]undo summary
[R1-rip-1]ne		
[R1-rip-1]network 100.0.0.0
[R1-rip-1]ne	
[R1-rip-1]network 192.168.0.0
[R1-rip-1]network 192.168.1.0
[R1-rip-1]

R2：

[R2]rip 1
[R2-rip-1]v 2
[R2-rip-1]und	
[R2-rip-1]undo s	
[R2-rip-1]undo su	
[R2-rip-1]undo summary 
[R2-rip-1]ne	
[R2-rip-1]network 100.0.0.0
[R2-rip-1]q
[R2]

OSPF

R2：

[R2]os	
[R2]ospf 1 rou	
[R2]ospf 1 router-id 2.2.2.2
[R2-ospf-1]a 0
[R2-ospf-1-area-0.0.0.0]ne	
[R2-ospf-1-area-0.0.0.0]network 100.2.2.0 0.0.0.255
[R2-ospf-1-area-0.0.0.0]

R3：

[R3]os	
[R3]ospf 1 rou	
[R3]ospf 1 router-id 3.3.3.3
[R3-ospf-1]a 0
[R3-ospf-1-area-0.0.0.0]ne	
[R3-ospf-1-area-0.0.0.0]network 100.2.2.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]network 192.168.2.1 0.0.0.0
[R3-ospf-1-area-0.0.0.0]network 192.168.3.1 0.0.0.0
[R3-ospf-1-area-0.0.0.0]
[R3-ospf-1]a 1
[R3-ospf-1-area-0.0.0.1]ne	
[R3-ospf-1-area-0.0.0.1]network 100.3.3.0 0.0.0.255
[R3-ospf-1-area-0.0.0.1]q
[R3-ospf-1]

R4：

[R4]os	
[R4]ospf 1 r	
[R4]ospf 1 router-id 4.4.4.4
[R4-ospf-1]a 1
[R4-ospf-1-area-0.0.0.1]ne	
[R4-ospf-1-area-0.0.0.1]network 100.3.3.0 0.0.0.255
[R4-ospf-1-area-0.0.0.1]
[R4-ospf-1-area-0.0.0.1]ne	
[R4-ospf-1-area-0.0.0.1]network 192.168.4.1 0.0.0.0
[R4-ospf-1-area-0.0.0.1]network 192.168.5.1 0.0.0.0
[R4-ospf-1-area-0.0.0.1]

第三步：进行路由引入，屏蔽掉R4的网段

先引入

R2：

[R2]os	
[R2]ospf 1
[R2-ospf-1]im	
[R2-ospf-1]import-route rip	
[R2-ospf-1]import-route rip 1
[R2-ospf-1]q
[R2]rip 1
[R2-rip-1]im	
[R2-rip-1]import-route os	
[R2-rip-1]import-route ospf 1
[R2-rip-1]q
[R2]

再进行

[R2]ac	
[R2]acl 2000
[R2-acl-basic-2000]ru	
[R2-acl-basic-2000]rule de	
[R2-acl-basic-2000]rule deny s	
[R2-acl-basic-2000]rule deny source 192.168.4.0 0.0.1.255
[R2-acl-basic-2000]ri	
[R2-acl-basic-2000]ru	
[R2-acl-basic-2000]rule p	
[R2-acl-basic-2000]rule permit s	
[R2-acl-basic-2000]rule permit source 0.0.0.0 255.255.255.255
[R2-acl-basic-2000]q
[R2]rou	
[R2]route-po	
[R2]route-policy aa pr	
[R2]route-policy aa pe	
[R2]route-policy aa permit no	
[R2]route-policy aa permit node 10
Info: New Sequence of this List.
[R2-route-policy]if	
[R2-route-policy]if-match a	
[R2-route-policy]if-match acl 2000
[R2-route-policy]q
[R2]rip 1
[R2-rip-1]im	
[R2-rip-1]import-route os	
[R2-rip-1]import-route ospf 1 rou	
[R2-rip-1]import-route ospf 1 route-policy aa
[R2-rip-1]q
[R2]

第四步：使用过滤让R4无法学习到R1的业务网段路由

R4:

<R4>sys
Enter system view, return user view with Ctrl+Z.
[R4]ip ip	
[R4]ip ip-prefix aa in	
[R4]ip ip-prefix aa index 10 de	
[R4]ip ip-prefix aa index 10 deny 192.168.0.0 23 l	
[R4]ip ip-prefix aa index 10 deny 192.168.0.0 23 less-equal 32
[R4]ip ip	
[R4]ip ip-prefix aa in	
[R4]ip ip-prefix aa index 20 pr	
[R4]ip ip-prefix aa index 20 pe	
[R4]ip ip-prefix aa index 20 permit 0.0.0.0 0 l	
[R4]ip ip-prefix aa index 20 permit 0.0.0.0 0 less-equal 32
[R4]os	
[R4]ospf 1
[R4-ospf-1]fi	
[R4-ospf-1]filter-policy ip	
[R4-ospf-1]filter-policy ip-prefix aa im	
[R4-ospf-1]filter-policy ip-prefix aa import 
[R4-ospf-1]q
[R4]
[R4]

第五步：使OSPF区域不出现RIP报文

R2：

[R2]rip 1
[R2-rip-1]si	
[R2-rip-1]silent-interface g	
[R2-rip-1]silent-interface GigabitEthernet 0/0/1
[R2-rip-1]q
[R2]

实验完成