Android自定义Drawable—灵活多变的矩形背景
在安卓开发中，我们通常需要为不同的按钮设置不同的背景以实现不同的效果，有时还需要这些按钮根据实际情况进行变化。如果采用编写resource中xml文件的形式，就需要重复定义许多只有微小变动的资源文件。这使得整个工程的简洁性和可读性受到影响。本文将介绍一种基于java代码实现的矩形背景自定义工具，该工具是继承Drawable的基础上开发的，它具有如下功能：
- 自定义矩形的内部填充颜色和边框颜色；
- 自定义矩形四角的弧度，支持分别定义和整体定义；
- 自定义矩形的阴影（颜色、宽度及位置）；
- 自定义矩形的触摸水波纹效果（颜色、显示速度）；
- 自定义矩形的边框宽度（按比例/按固定宽度），并可与ObjectAnimator配合实现动画效果
综合展示如下：
直接上源码：
public class FlexibleRectDrawable extends Drawable {private Paint paint_stroke;private Paint paint_fill;private Paint paint_ripple;private RectF outerRect;private RectF innerRect;private RectF zeroRect;//矩形内部颜色及边框颜色private int solidColor;private int strokeColor;private int solidColorHolder;private int strokeColorHolder;//边框设置private boolean hasStroke;private float strokeWidth;private float strokeWidthVariable;//可变动的边框宽度，用于生成后调整宽度private float strokeInPercent;//0~1 边框与整体大小的占比//圆角半径private float rectRadius;//圆角位置private int corners;//阴影设置private boolean needShadow;private float shadowRange;//阴影粗细private float shadowDx;//阴影中心x轴偏移private float shadowDy;//阴影中心y轴偏移private int shadowColor;//阴影颜色//阴影位置private float offsetLeft;private float offsetTop;private float offsetRight;private float offsetBottom;//Ripple Effectenum RippleAnimState{STATE_ENTER, STATE_EXIT, STATE_EXIT_LATER}private RippleAnimState ripple_anim_state;private ObjectAnimator ripple_alpha_animator;private ObjectAnimator ripple_radius_animator;private PointF currentPoint;private PointF pressedPoint;private Path ripple_bound_path;private boolean needRipple;private int rippleSpeed;//msprivate float maxRippleRadius;private float rippleRadius;//属性动画private int rippleColor;private int maxRippleAlpha;private int rippleAlpha;//属性动画public static final int SQUARE_CORNER = 0;public static final int CORNER_TOP_LEFT = 1;public static final int CORNER_TOP_RIGHT = 1 << 1;public static final int CORNER_BOTTOM_LEFT = 1 << 2;public static final int CORNER_BOTTOM_RIGHT = 1 << 3;public static final int CORNER_HALF_LEFT = CORNER_TOP_LEFT | CORNER_BOTTOM_LEFT;public static final int CORNER_HALF_RIGHT = CORNER_TOP_RIGHT | CORNER_BOTTOM_RIGHT;public static final int CORNER_ALL = CORNER_TOP_LEFT | CORNER_TOP_RIGHT | CORNER_BOTTOM_LEFT | CORNER_BOTTOM_RIGHT;public enum RectType{BORDER_ONLY,SOLID_BLOCK,BORDERED_BLOCK,NOT_DEFINED}private RectType type;public FlexibleRectDrawable() {//默认值this.type = RectType.NOT_DEFINED;this.solidColor = 0;//透明色this.strokeColor = 0;//透明色this.solidColorHolder = 0;this.strokeColorHolder = 0;this.hasStroke = false;this.strokeWidth = 0;this.strokeWidthVariable = 0;this.corners = SQUARE_CORNER;this.rectRadius = 0;this.needShadow = false;this.shadowRange = 0;this.shadowDx = 0;this.shadowDy = 0;this.shadowColor = Color.parseColor("#aa000000");this.offsetBottom = 0;this.offsetLeft = 0;this.offsetTop = 0;this.offsetRight = 0;this.currentPoint = new PointF();this.pressedPoint = new PointF();this.rippleColor = Color.parseColor("#21000000");this.maxRippleAlpha = this.rippleColor>>24 & 0xFF;this.ripple_bound_path = new Path();}public void setupPainters() {paint_stroke = new Paint();paint_stroke.setAntiAlias(true);paint_stroke.setFilterBitmap(true);paint_stroke.setDither(true);paint_stroke.setStyle(Paint.Style.FILL);paint_stroke.setColor(strokeColor);//设置阴影if(needShadow)paint_stroke.setShadowLayer(shadowRange, shadowDx, shadowDy, shadowColor);paint_fill = new Paint();paint_fill.setAntiAlias(true);paint_fill.setFilterBitmap(true);paint_fill.setDither(true);paint_fill.setStyle(Paint.Style.FILL);paint_fill.setColor(solidColor);//设置水波纹效果paint_ripple = new Paint();paint_ripple.setAntiAlias(true);paint_ripple.setStyle(Paint.Style.FILL);paint_ripple.setColor(rippleColor);invalidateSelf();}@Overrideprotected void onBoundsChange(Rect bounds) {super.onBoundsChange(bounds);if (bounds.right - bounds.left > 0 && bounds.bottom - bounds.top > 0) {int width = bounds.right - bounds.left;int height = bounds.bottom - bounds.top;outerRect = new RectF(offsetLeft, offsetTop, width - offsetRight, height - offsetBottom);innerRect = new RectF(offsetLeft + strokeWidth, offsetTop + strokeWidth,width - offsetRight - strokeWidth, height - offsetBottom - strokeWidth);zeroRect = new RectF(width/2.0f, height/2.0f, width/2.0f, height/2.0f);invalidateSelf();}}@RequiresApi(api = Build.VERSION_CODES.Q)@Overridepublic void draw(Canvas canvas) {float[] Radii = {0,0,0,0,0,0,0,0};if ((corners & CORNER_TOP_LEFT) != 0) {Radii[0] = rectRadius;Radii[1] = rectRadius;}if ((corners & CORNER_TOP_RIGHT) != 0) {Radii[2] = rectRadius;Radii[3] = rectRadius;}if ((corners & CORNER_BOTTOM_RIGHT) != 0) {Radii[4] = rectRadius;Radii[5] = rectRadius;}if ((corners & CORNER_BOTTOM_LEFT) != 0) {Radii[6] = rectRadius;Radii[7] = rectRadius;}switch(type){case BORDER_ONLY:canvas.drawDoubleRoundRect(outerRect, Radii, innerRect, Radii, paint_stroke);break;case SOLID_BLOCK:canvas.drawDoubleRoundRect(outerRect,Radii,zeroRect,Radii, paint_fill);break;case BORDERED_BLOCK:canvas.drawDoubleRoundRect(outerRect, Radii, innerRect, Radii, paint_stroke);canvas.drawDoubleRoundRect(innerRect,Radii,zeroRect,Radii, paint_fill);break;case NOT_DEFINED:throw new RuntimeException("RectType undefined");default:}//draw ripplecanvas.save();ripple_bound_path.addRoundRect(innerRect,Radii,Path.Direction.CW);canvas.clipPath(ripple_bound_path);if(ripple_anim_state == STATE_ENTER){paint_ripple.setAlpha(rippleAlpha);canvas.drawCircle(pressedPoint.x, pressedPoint.y, rippleRadius, paint_ripple);}else if(ripple_anim_state == STATE_EXIT){paint_ripple.setAlpha(rippleAlpha);canvas.drawDoubleRoundRect(innerRect,Radii,zeroRect,Radii, paint_ripple);}canvas.restore();}@Overrideprotected boolean onStateChange(int[] stateSet) {boolean enable = false;boolean pressed = false;for (int st : stateSet) {switch (st) {case android.R.attr.state_pressed:pressed = true;break;case android.R.attr.state_enabled:enable = true;break;}}if (!enable) return false;if (!needRipple)return false;if (pressed) {startRippleAnimation();return true;} else if (ripple_anim_state == STATE_ENTER) {exitRippleAnimation();return true;} else {return false;}}private void startRippleAnimation() {ripple_anim_state = STATE_ENTER;pressedPoint.set(currentPoint);maxRippleRadius = Math.max(innerRect.width(), innerRect.height());if(ripple_radius_animator != null && ripple_radius_animator.isRunning()){ripple_radius_animator.cancel();}ripple_radius_animator = new ObjectAnimator();ripple_radius_animator.setTarget(this);ripple_radius_animator.setPropertyName("rippleRadius");ripple_radius_animator.setInterpolator(new LinearInterpolator());ripple_radius_animator.setDuration(rippleSpeed);ripple_radius_animator.setFloatValues(0,maxRippleRadius);ripple_radius_animator.addListener(new AnimatorListenerAdapter() {@Overridepublic void onAnimationEnd(Animator animation) {if(ripple_anim_state == STATE_EXIT_LATER){ripple_anim_state = STATE_EXIT;exitRippleAnimation();}}});ripple_radius_animator.start();}private void exitRippleAnimation() {ripple_alpha_animator = new ObjectAnimator();ripple_alpha_animator.setTarget(this);ripple_alpha_animator.setPropertyName("rippleAlpha");ripple_alpha_animator.setInterpolator(new LinearInterpolator());ripple_alpha_animator.setDuration(300);ripple_alpha_animator.setIntValues(maxRippleAlpha,0);ripple_alpha_animator.start();}@Overridepublic boolean isStateful() {return true;}@Overridepublic void setHotspot(float x, float y) {currentPoint.set(x,y);}public float getOffsetLeft() {return offsetLeft;}public void setOffsetLeft(float offsetLeft) {this.offsetLeft = offsetLeft;}public float getOffsetTop() {return offsetTop;}public void setOffsetTop(float offsetTop) {this.offsetTop = offsetTop;}public float getOffsetRight() {return offsetRight;}public void setOffsetRight(float offsetRight) {this.offsetRight = offsetRight;}public float getOffsetBottom() {return offsetBottom;}public void setOffsetBottom(float offsetBottom) {this.offsetBottom = offsetBottom;}public float getRectRadius() {return rectRadius;}public void setRectRadius(float rectRadius) {this.rectRadius = rectRadius;}public void setCorners(int corners) {this.corners = corners;}public FlexibleRectDrawable setColor(int color) {paint_stroke.setColor(color);return this;}public int getSolidColor() {return solidColor;}public void setSolidColor(int solidColor) {this.solidColor = solidColor;}public int getStrokeColor() {return strokeColor;}public void setStrokeColor(int strokeColor) {this.strokeColor = strokeColor;}public boolean isHasStroke() {return hasStroke;}public void setHasStroke(boolean hasStroke) {this.hasStroke = hasStroke;}public boolean isNeedShadow() {return needShadow;}public void setNeedShadow(boolean needShadow) {this.needShadow = needShadow;}public float getShadowRange() {return shadowRange;}public void setShadowRange(float shadowRange) {this.shadowRange = shadowRange;}public float getShadowDx() {return shadowDx;}public void setShadowDx(float shadowDx) {this.shadowDx = shadowDx;}public float getShadowDy() {return shadowDy;}public void setShadowDy(float shadowDy) {this.shadowDy = shadowDy;}public int getShadowColor() {return shadowColor;}public void setShadowColor(int shadowColor) {this.shadowColor = shadowColor;}float getStrokeWidth() {return strokeWidth;}void setStrokeWidth(float strokeWidth) {this.strokeWidth = strokeWidth;this.strokeWidthVariable = strokeWidth;}public float getStrokeWidthVariable() {if(type==RectType.SOLID_BLOCK)return Math.min((getBounds().width() - offsetRight),(getBounds().height() - offsetBottom));return strokeWidthVariable;}public void setStrokeWidthVariable(float strokeWidthVariable) {this.strokeWidthVariable = strokeWidthVariable;int width = getBounds().width();int height = getBounds().height();System.out.println("type= " + type.name() + " stroke = " + strokeWidthVariable+" width = "+width+" height = "+height);if((width - offsetRight)<=strokeWidthVariable||(height - offsetBottom)<=strokeWidthVariable){//边框宽大到可以认为是纯色块if(type == RectType.BORDERED_BLOCK && this.solidColor!=0){this.solidColorHolder = this.solidColor;this.solidColor = this.strokeColor;}//若内部无色，则用边框颜色作为填充if(type == RectType.BORDER_ONLY && this.strokeColor!=0) {this.solidColor = this.strokeColor;}type = RectType.SOLID_BLOCK;}else{if(type==RectType.SOLID_BLOCK){this.strokeColor = this.solidColor;if(this.solidColorHolder == 0){type = RectType.BORDER_ONLY;//纯色块转变为仅带边框的块}else {this.solidColor = this.solidColorHolder;type = RectType.BORDERED_BLOCK;}}innerRect.set(offsetLeft + strokeWidthVariable, offsetTop + strokeWidthVariable,width - offsetRight - strokeWidthVariable,height - offsetBottom - strokeWidthVariable);}setupPainters();//重设画笔，并重绘}public void setStrokeInPercent(@FloatRange(from= 0.0f,to= 1.0f) float strokeInPercent) {if(strokeColor==0)throw new IllegalArgumentException("setStrokeInPercent函数仅适用于带边框的Drawable");this.strokeInPercent = strokeInPercent;float delta_width = outerRect.width()*strokeInPercent/2;float delta_height = outerRect.height()*strokeInPercent/2;//System.out.println("delta_height= " + delta_height + " delta_width= " + delta_width);innerRect.set(outerRect.left+delta_width, outerRect.top+delta_height,outerRect.right-delta_width,outerRect.bottom-delta_height);if(this.strokeInPercent>0 && this.strokeInPercent<1){//带边框的块if(this.solidColor==this.strokeColor && this.solidColorHolder == 0)this.type = RectType.BORDER_ONLY;//转变为仅带边框的块else{if(this.solidColorHolder!=0){this.solidColor = this.solidColorHolder;this.solidColorHolder = 0;}this.type = RectType.BORDERED_BLOCK;}}else if(this.strokeInPercent == 0){//内部填充的纯色块this.type = RectType.SOLID_BLOCK;if(solidColor == 0)Log.e("FlexibleRectDrawable","Drawable被绘制为透明色");}else if(this.strokeInPercent == 1){//边框填充的纯色块this.type = RectType.SOLID_BLOCK;if(this.solidColorHolder==0 && this.solidColor!=this.strokeColor){this.solidColorHolder = this.solidColor;this.solidColor = this.strokeColor;}}setupPainters();}public float getStrokeInPercent() {float inner_width = innerRect.width();float outer_width = outerRect.width();return (1-inner_width/outer_width);}public RectType getType() {return type;}public void setType(RectType type) {this.type = type;}public float getRippleRadius() {return rippleRadius;}public void setRippleRadius(float rippleRadius) {this.rippleRadius = rippleRadius;invalidateSelf();}public int getRippleColor() {return rippleColor;}public void setRippleColor(int rippleColor) {this.rippleColor = rippleColor;}public int getMaxRippleAlpha() {return maxRippleAlpha;}public void setMaxRippleAlpha(int maxRippleAlpha) {this.maxRippleAlpha = maxRippleAlpha;}public int getRippleAlpha() {return rippleAlpha;}public void setRippleAlpha(int rippleAlpha) {this.rippleAlpha = rippleAlpha;invalidateSelf();}public boolean isNeedRipple() {return needRipple;}public void setNeedRipple(boolean needRipple) {this.needRipple = needRipple;}public float getMaxRippleRadius() {return maxRippleRadius;}public void setMaxRippleRadius(float maxRippleRadius) {this.maxRippleRadius = maxRippleRadius;}public int getRippleSpeed() {return rippleSpeed;}public void setRippleSpeed(int rippleSpeed) {this.rippleSpeed = rippleSpeed;}@Overridepublic void setAlpha(int i) {}@Overridepublic void setColorFilter(ColorFilter colorFilter) {}@Overridepublic int getOpacity() {return PixelFormat.TRANSLUCENT;}}
此外，设置一个Builder让自定义构建变得更容易：
public static class Builder{private FlexibleRectDrawable drawable;public Builder() {this.drawable = new FlexibleRectDrawable();}public static Builder create(){return new Builder();}public Builder setSolidFill(@ColorInt int color){this.drawable.setSolidColor(color);switch(this.drawable.getType()){case BORDER_ONLY:this.drawable.setType(RectType.BORDERED_BLOCK);break;case SOLID_BLOCK:case BORDERED_BLOCK:Log.i("DrawableBuilder","cover solid color");break;case NOT_DEFINED:this.drawable.setType(RectType.SOLID_BLOCK);break;default:}return this;}public Builder setStroke(float width,@ColorInt int color){this.drawable.setHasStroke(true);this.drawable.setStrokeColor(color);this.drawable.setStrokeWidth(width);switch(this.drawable.getType()){case BORDER_ONLY:case BORDERED_BLOCK:Log.i("DrawableBuilder","cover solid color");break;case SOLID_BLOCK:this.drawable.setType(RectType.BORDERED_BLOCK);break;case NOT_DEFINED:this.drawable.setType(RectType.BORDER_ONLY);break;default:}return this;}public Builder setShadow(float shadowRange,@ColorInt int color){this.drawable.setNeedShadow(true);this.drawable.setShadowRange(shadowRange);this.drawable.setShadowColor(color);return this;}public Builder setShadowOffset(float top, float bottom, float left, float right){if(!this.drawable.isNeedShadow())throw new IllegalArgumentException("必须先调用setShadow,再设置阴影位置");this.drawable.setOffsetTop(top);this.drawable.setOffsetBottom(bottom);this.drawable.setOffsetLeft(left);this.drawable.setOffsetRight(right);return this;}public Builder setShadowOffsetCenter(float offset){if(!this.drawable.isNeedShadow())throw new IllegalArgumentException("必须先调用setShadow,再设置阴影位置");this.drawable.setOffsetTop(offset);this.drawable.setOffsetBottom(offset);this.drawable.setOffsetLeft(offset);this.drawable.setOffsetRight(offset);return this;}public Builder setCorners(int radius,int corner_type){this.drawable.setRectRadius(radius);this.drawable.setCorners(corner_type);return this;}public Builder setRipple(int color, int speed_millisecond){this.drawable.setNeedRipple(true);int check = color >>24;if (check==-1)throw new IllegalArgumentException("ripple颜色必须具有透明色");this.drawable.setRippleColor(color);this.drawable.setMaxRippleAlpha(color>>24 & 0xFF);this.drawable.setRippleSpeed(speed_millisecond);return this;}public FlexibleRectDrawable build(){this.drawable.setupPainters();return this.drawable;}}
辅助函数：dp转px
public int dp2Px(float dpValue) {final float scale = getResources().getDisplayMetrics().density;return (int) (dpValue * scale + 0.5f);}
使用方法
1. 一个普通的圆角按钮
FlexibleRectDrawable drawable1 = FlexibleRectDrawable.Builder.create().setStroke(dp2Px(3), Color.parseColor("#4682B4")).setSolidFill(Color.parseColor("#DAA520")).setCorners(dp2Px(50), FlexibleRectDrawable.CORNER_ALL).build();
LinearLayout view1 = findViewById(R.id.frd_view1);
view1.setBackground(drawable1);
2. 一个带水波纹效果的按钮
实心/空心：
//实心按钮
FlexibleRectDrawable drawabled1 = FlexibleRectDrawable.Builder.create().setSolidFill(Color.parseColor("#4682B4")).setCorners(dp2Px(50), FlexibleRectDrawable.CORNER_ALL).setRipple(Color.parseColor("#22FFFFFF"),300).build();
//空心按钮
FlexibleRectDrawable drawable2 = FlexibleRectDrawable.Builder.create().setStroke(dp2Px(3), Color.parseColor("#4682B4")).setCorners(dp2Px(50), FlexibleRectDrawable.CORNER_ALL).setRipple(Color.parseColor("#22000000"),300).build();
3. 一个带阴影的按钮
实心/空心：
//空心
FlexibleRectDrawable drawabled2 = FlexibleRectDrawable.Builder.create().setStroke(dp2Px(3),Color.parseColor("#1E90FF")).setCorners(dp2Px(50), FlexibleRectDrawable.CORNER_ALL).setShadow(dp2Px(7), Color.parseColor("#fe00FFFF")).setShadowOffsetCenter(dp2Px(5)).build();
//实心
FlexibleRectDrawable drawable2 = FlexibleRectDrawable.Builder.create().setStroke(dp2Px(3), Color.parseColor("#4682B4")).setCorners(dp2Px(50), FlexibleRectDrawable.CORNER_ALL).setSolidFill(Color.parseColor("#FFFFFF")).setShadow(dp2Px(5), Color.parseColor("#FEA9A9A9")).setShadowOffsetCenter(dp2Px(5)).build();
4. 两个左右合并的按钮
布局文件(.xml)：
<LinearLayoutandroid:id="@+id/frd_view_d3"android:layout_width="match_parent"android:layout_height="wrap_content"android:orientation="horizontal"android:layout_margin="10dp"android:layout_below="@id/frd_view_d2"><Buttonandroid:id="@+id/frd_btn1"android:layout_width="0dp"android:layout_height="wrap_content"android:layout_weight="1"android:text="btn1"/><Buttonandroid:id="@+id/frd_btn2"android:layout_width="0dp"android:layout_height="wrap_content"android:layout_weight="1"android:text="btn2"android:textColor="@color/white"/></LinearLayout>
对应java代码：
FlexibleRectDrawable drawable_btn_left = FlexibleRectDrawable.Builder.create().setStroke(dp2Px(3),Color.parseColor("#1E90FF")).setSolidFill(Color.parseColor("#1E90FF")).setCorners(dp2Px(50), FlexibleRectDrawable.CORNER_HALF_LEFT).setRipple(Color.parseColor("#33000000"),300).build();
FlexibleRectDrawable drawable_btn_right = FlexibleRectDrawable.Builder.create().setStroke(dp2Px(3),Color.parseColor("#1E90FF")).setCorners(dp2Px(50), FlexibleRectDrawable.CORNER_HALF_RIGHT).setRipple(Color.parseColor("#33FFFFFF"),300).build();
Button btn_left = findViewById(R.id.frd_btn1);
btn_left.setBackground(drawable_btn_left);
Button btn_right = findViewById(R.id.frd_btn2);
btn_right.setBackground(drawable_btn_right);
5. 按固定宽度设置矩形边框
改变边框的宽度和颜色
private boolean on_view3 = false;
...FlexibleRectDrawable drawable3 = FlexibleRectDrawable.Builder.create().setStroke(dp2Px(3), Color.parseColor("#4682B4")).setSolidFill(Color.parseColor("#131313")).setCorners(dp2Px(50), FlexibleRectDrawable.CORNER_ALL).build();LinearLayout view3 = findViewById(R.id.frd_view3);
view3.setBackground(drawable3);view3.setOnClickListener(v -> {on_view3 = !on_view3;if(on_view3){drawable3.setStrokeColor(Color.RED);drawable3.setStrokeWidthVariable(dp2Px(5));}else{drawable3.setStrokeColor(Color.parseColor("#4682B4"));drawable3.setStrokeWidthVariable(dp2Px(3));}});
通过属性动画实现按钮状态切换
private boolean on_view5 = false;
...FlexibleRectDrawable drawabled5 = FlexibleRectDrawable.Builder.create().setStroke(dp2Px(3),Color.parseColor("#4682B4")).setSolidFill(Color.parseColor("#3CB371")).setCorners(dp2Px(5), FlexibleRectDrawable.CORNER_ALL).build();
LinearLayout viewd5 = findViewById(R.id.frd_view_d5);
viewd5.setBackground(drawabled5);
viewd5.setOnClickListener(v -> {on_view5 = !on_view5;if(on_view5){ObjectAnimator animator = new ObjectAnimator();animator.setTarget(drawabled5);animator.setPropertyName("strokeWidthVariable");animator.setDuration(1000);animator.setFloatValues(drawabled5.getStrokeWidthVariable(),dp2Px(300));animator.start();}else {ObjectAnimator animator = new ObjectAnimator();animator.setTarget(drawabled5);animator.setPropertyName("strokeWidthVariable");animator.setDuration(1000);animator.setFloatValues(drawabled5.getStrokeWidthVariable(),dp2Px(3));animator.start();}});
6. 按所占百分比设置矩形边框
private boolean on_view6 = false;
private float origin_percent = 0.0f;
...FlexibleRectDrawable drawabled6 = FlexibleRectDrawable.Builder.create().setStroke(dp2Px(3),Color.parseColor("#4682B4")).setCorners(dp2Px(5), FlexibleRectDrawable.CORNER_ALL).build();
LinearLayout viewd6 = findViewById(R.id.frd_view_d6);
viewd6.setBackground(drawabled6);
viewd6.setOnClickListener(v -> {on_view6 = !on_view6;if (on_view6) {origin_percent = drawabled6.getStrokeInPercent();ObjectAnimator animator = new ObjectAnimator();animator.setTarget(drawabled6);animator.setPropertyName("strokeInPercent");animator.setDuration(500);animator.setFloatValues(origin_percent, 1f);animator.start();}else {ObjectAnimator animator = new ObjectAnimator();animator.setTarget(drawabled6);animator.setPropertyName("strokeInPercent");animator.setDuration(500);animator.setFloatValues(drawabled6.getStrokeInPercent(), origin_percent);animator.start();}});
![buuctf-[WUSTCTF2020]CV Maker 文件上传漏洞](https://img-blog.csdnimg.cn/b89cf572a8b544f79d35ad553c93897c.png)
