ssd202d-badblock-坏块检测

这边文章讲述的是坏快检测功能

思路:

1.第一次烧录固件会实现跳坏块,但是后续使用会导致坏块的产生;

于是我在uboot环境变量添加了两个变量来控制坏快

lb_badnum = //坏块个数

lb_badoff = //坏块所在位置

2.第一次开机会根据lb_badnum是否存在判断,如果不存在则保存上面坏块信息,跳过坏块功能

3.第二次开机之后会获取环境变量lb_badnum和lb_badoff;

3.1.然后检测实际坏块数,进行对比,如果有新增坏块, 则判断新坏块产生的所在分区;

3.2.然后判断所在分区坏块大小加上固件大小后是否超出划分的分区空间;

3.3.执行对应的分区还原;

commit 0ae66e0a3d1366aa90b4661b86203345f4ae02bd (HEAD -> master)
Author: longmin <1938049502@qq.com>
Date:   Tue Dec 10 16:44:44 2024 +0800add cmd_lbbad.c support bad block detection functiondiff --git a/boot/common/Kconfig b/boot/common/Kconfig
index 516a279af..11cb2c30a 100755
--- a/boot/common/Kconfig
+++ b/boot/common/Kconfig
@@ -365,4 +365,10 @@ config XZconfig MZbool "MZ"config SILENT_CONSOLE
-       bool "SILENT_CONSOLE"
\ No newline at end of file
+       bool "SILENT_CONSOLE"
+
+config CMD_LBBAD
+       bool "LBBAD"
+       help
+         This enables the command CONFIG_CMD_LBBAD power on detection of bad
+         blocks.
\ No newline at end of file
diff --git a/boot/common/Makefile b/boot/common/Makefile
index 85ba0bffd..0d54285f5 100755
--- a/boot/common/Makefile
+++ b/boot/common/Makefile
@@ -344,4 +344,5 @@ endifobj-$(CONFIG_CMD_LBCHK) += cmd_lbchk.oobj-$(CONFIG_CMD_LBFDT) += cmd_lbfdt.o
+obj-$(CONFIG_CMD_LBBAD) += cmd_lbbad.oobj-y += cmd_sar.o
diff --git a/boot/common/autoboot.c b/boot/common/autoboot.c
index 60f7b2291..927dcd18a 100755
--- a/boot/common/autoboot.c
+++ b/boot/common/autoboot.c
@@ -585,6 +585,10 @@ void autoboot_command(const char *s)boot:debug("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>");
+#if defined (CONFIG_CMD_LBBAD)
+      extern int run_lbbadblock(void);
+      run_lbbadblock();    /* bad block inspection */
+#endif#if defined (CONFIG_CMD_LBCHK) && defined (LONBON_CHECK_RUNCMD)extern int run_lbcheck(int cmd);run_lbcheck(LONBON_CHECK_RUNCMD);
diff --git a/boot/common/cmd_lbbad.c b/boot/common/cmd_lbbad.c
new file mode 100755
index 000000000..5bfa4890c
--- /dev/null
+++ b/boot/common/cmd_lbbad.c
@@ -0,0 +1,503 @@
+#include <common.h>^M
+#include <command.h>^M
+#include <malloc.h>^M
+#include <nand.h>^M
+#include <u-boot/md5.h>^M
+#include <asm/io.h>^M
+#include <spi.h>^M
+#include <spi_flash.h>^M
+#if (1 == CONFIG_LONBON_LED) || (1 == LONBON_CMD_CHECK_2BTN_FOR_RESTORE)^M
+#include "../drivers/mstar/gpio/infinity2m/gpio.h"^M
+#include "../drivers/mstar/gpio/drvGPIO.h"^M
+#endif^M
+^M
+//#define LB_DEBUG^M
+^M
+#ifdef LB_DEBUG^M
+#define LBCHK_DEBUG(msg...)            printf(msg)^M
+#else^M
+#define LBCHK_DEBUG(msg...)            do{}while(0)^M
+#endif^M
+^M
+typedef int BOOL;^M
+^M
+#ifndef FALSE^M
+#define FALSE  0^M
+#endif^M
+^M
+#ifndef TRUE^M
+#define TRUE   1^M
+#endif^M
+^M
+#ifdef CONFIG_YAFFS2^M
+extern void cmd_yaffs_devconfig(char *mp, int flash_dev, int start_block, int end_block);^M
+extern void cmd_yaffs_mount(char *mp);^M
+extern void cmd_yaffs_umount(char *mp);^M
+extern void cmd_yaffs_mread_file(char *fn, char *addr);^M
+#endif^M
+^M
+#define BADBLOCK_MAX 200^M
+^M
+extern int lb_nand_get_badblock_number(ulong *badblock_list);^M
+extern int lbcmd_get_imagename_by_cmd(char* imgname, unsigned char cmd);^M
+extern int lonbon_get_partitions(const char *part_name, uint *part_offset, uint *part_size);^M
+extern int lonbon_get_partitions_name(uint *off, char *part_name, uint *part_offset, uint *part_size);^M
+extern int lb_nand_flash_partition_baseAddr(const char *part_name, uint *part_offset, uint *part_size);^M
+^M
+typedef struct {^M
+       int uboot;^M
+       int kernel;^M
+       int rootfs;^M
+       int backup;^M
+       int ro;^M
+       int rw;^M
+       int ipl;^M
+       int ipl_cust;^M
+       int logo;^M
+       int factory;^M
+       int lbcmd;^M
+       int lbflash;^M
+       int lbcfg;^M
+       int env;^M
+       int key_cust;^M
+} lb_bad_partition_t;^M
+^M
+int lonbon_set_badnum(int number)^M
+{^M
+       unsigned char  badnum[2];^M
+    if(number >= 0) {^M
+               memset(badnum,0,2);^M
+               badnum[0] = number + 0x30;^M
+               setenv("lb_badnum", (const char *)badnum);^M
+               run_command("saveenv", 0);^M
+               return 0;^M
+    }^M
+       return -1;^M
+}^M
+^M
+int lonbon_get_badnum(void)^M
+{^M
+       char * lb_badnum = getenv("lb_badnum");^M
+       unsigned char  badnum[2];^M
+^M
+    if(lb_badnum) {^M
+               badnum[0] = *lb_badnum - 0x30;^M
+               printf("old bad_block number= %d\n",badnum[0]);^M
+               return badnum[0];^M
+    }else{^M
+               printf("%s lb_badnum=null\n", __func__);^M
+               return -1;^M
+       }^M
+       return 0;^M
+}^M
+^M
+int lonbon_number_exist(int all_number, ulong *badblock_list, ulong number){^M
+       int i;^M
+       for(i=0; i < all_number; i++)^M
+       {^M
+               if(*(badblock_list+i) == number)^M
+               {^M
+                       return i;^M
+               }^M
+       }^M
+       return -1;^M
+}^M
+^M
+int lonbon_new_badblock(int all_number, ulong *badblock_list, int env_number, ulong *old_badblock_list,ulong *add_badblock_list)^M
+{^M
+       int i, j, k = 0;^M
+       bool flag;^M
+       for (i=0; i < all_number; i++){^M
+               flag = false;^M
+               for (j=0; j < all_number; j++){^M
+               if( badblock_list[i] == old_badblock_list[j] )^M
+               flag = true;^M
+               }^M
+^M
+               if(flag == false){^M
+               *(add_badblock_list + k) = badblock_list[i];^M
+               k++;^M
+               }^M
+^M
+       }^M
+^M
+       return 0;^M
+}^M
+^M
+^M
+int lonbon_get_bad_offset(int all_number, ulong *badblock_list, int number)^M
+{^M
+       int i;^M
+       char *lb_badoff = getenv("lb_badoff");^M
+       char badb_offset[1024]= {0};^M
+       ulong old_badb_list[all_number];^M
+       ulong *old_badblock_list = &old_badb_list[0];^M
+       ulong add_badb_list[all_number];^M
+       ulong *add_badblock_list = &add_badb_list[0];^M
+       char *lb_bad_off;^M
+       ulong num;^M
+^M
+       if(all_number == 0){^M
+       printf("%s not badblock_list\n", __func__);^M
+       return 0;^M
+       }^M
+^M
+       if(lb_badoff){^M
+               strcpy(badb_offset,lb_badoff);^M
+               lb_bad_off = strtok(badb_offset, "-");^M
+               num = simple_strtol(lb_bad_off, NULL, 16);^M
+               old_badb_list[0] = num;^M
+               for(i=1; i < all_number;i++ ){^M
+               lb_bad_off = strtok(NULL ,"-");^M
+               num = simple_strtol(lb_bad_off, NULL, 16);^M
+               old_badb_list[i] = num;^M
+               }^M
+       }^M
+       /* determine the partition location of the new bad block */^M
+       lonbon_new_badblock(all_number, badblock_list, number, old_badblock_list, add_badblock_list);^M
+       for(i=0; i < all_number; i++){^M
+       *(badblock_list + i) = 0;^M
+       }^M
+       for(i=0; i<number;i++){^M
+       *(badblock_list + i) = add_badb_list[i];^M
+       }^M
+^M
+       return 1;^M
+}^M
+^M
+int lonbon_set_bad_offset(int number, ulong *badblock_list)^M
+{^M
+       int i;^M
+       char commandline[10] = {0};^M
+       char badb_addr[1024]= {'0'};^M
+       if(number >= 0) {^M
+               if(number > 0) {^M
+                       for(i=0;i<number;i++){^M
+                       sprintf(commandline,"%08lx-", *(badblock_list+i));^M
+                       strcat(badb_addr,commandline);^M
+                       }^M
+               }^M
+               printf("lonbon_set_bad_offset badblock_list:%s\n",badb_addr);^M
+               setenv("lb_badoff", (const char *)badb_addr);^M
+               run_command("saveenv", 0);^M
+               return number;^M
+       }^M
+       return 0;^M
+}^M
+^M
+int lonbon_set_partitions(lb_bad_partition_t *lb_part, char *part_name)^M
+{^M
+       //printf("%s %s \n",__func__,part_name);^M
+       if(strcmp(part_name, "UBOOT0") == 0||strcmp(part_name, "UBOOT1") == 0){^M
+       lb_part->uboot += 1;^M
+       }else if(strcmp(part_name, "rootfs") == 0){^M
+       lb_part->rootfs  += 1;^M
+       }else if(strcmp(part_name, "KERNEL") == 0||strcmp(part_name, "RECOVERY") == 0){^M
+       lb_part->kernel  += 1;^M
+       }else if(strcmp(part_name, "backup") == 0){^M
+       lb_part->backup  += 1;^M
+       }else if(strcmp(part_name, "ro") == 0){^M
+       lb_part->ro  += 1;^M
+       }else if(strcmp(part_name, "rw") == 0){^M
+       lb_part->rw  += 1;^M
+       }else if(strcmp(part_name, "IPL0") == 0||strcmp(part_name, "IPL1") == 0){^M
+       lb_part->ipl  += 1;^M
+       }else if(strcmp(part_name, "IPL_CUST0") == 0||strcmp(part_name, "IPL_CUST1") == 0){^M
+       lb_part->ipl_cust  += 1;^M
+       }else if(strcmp(part_name, "LOGO") == 0){^M
+       lb_part->logo  += 1;^M
+       }else if(strcmp(part_name, "factory") == 0){^M
+       lb_part->factory  += 1;^M
+       }else if(strcmp(part_name, "lbcmd") == 0){^M
+       lb_part->lbcmd  += 1;;^M
+       }else if(strcmp(part_name, "lbflash") == 0||strcmp(part_name, "lbflash2") == 0){^M
+       lb_part->lbflash  += 1;^M
+       }else if(strcmp(part_name, "lbcfg") == 0||strcmp(part_name, "lbcfg2") == 0){^M
+       lb_part->lbcfg  += 1;^M
+       }else if(strcmp(part_name, "ENV") == 0||strcmp(part_name, "ENV1") == 0){^M
+       lb_part->env  += 1;^M
+       }else if(strcmp(part_name, "KEY_CUST") == 0){^M
+       lb_part->key_cust  += 1;^M
+       }else{^M
+       return -1;^M
+       }^M
+^M
+       return 0;^M
+}^M
+^M
+void lonbon_printf_bad(int num){^M
+^M
+       switch (num)^M
+       {^M
+               case 0: printf("\n");^M
+                               printf("##############################################################################\n");^M
+                               printf("##############################################################################\n");^M
+                               printf("############################ bad block list:##################################\n");^M
+                               break;^M
+               case 1: printf("\nstart all bad block list:\n");^M
+                               break;^M
+               case 2: printf("\n");^M
+                               printf("add bad block:\n");^M
+                               printf("\n");^M
+                               break;^M
+               case 3: printf("\n");^M
+                               printf("##############################################################################\n");^M
+                               printf("##############################################################################\n");^M
+                               printf("\n");^M
+                               break;^M
+       }^M
+^M
+}^M
+^M
+uint lonbon_get_pattition_firmware_size(char *fileName){^M
+               char *mntpoint = "/factory";^M
+               uint part_offset;^M
+               uint part_size;^M
+               int start_block;^M
+               int end_block;^M
+^M
+               char filename[100] = {0};^M
+               unsigned long addr= 0x21000000;^M
+               lb_nand_flash_partition_baseAddr("factory", &part_offset, &part_size);^M
+               if(!part_offset || !part_size) {^M
+                       printf("#ERROR: No factory partition is found\n");^M
+                       return -1;^M
+               }^M
+^M
+               start_block = part_offset/(128*1024); /* Nand flash block size is 128 KB */^M
+               end_block = (part_offset+part_size)/(128*1024)-1;^M
+^M
+               cmd_yaffs_devconfig(mntpoint,0,start_block,end_block);^M
+               cmd_yaffs_mount(mntpoint);^M
+               sprintf(filename, "%s/%s", mntpoint, fileName);^M
+               cmd_yaffs_mread_file(filename, (char *)addr);^M
+               char *str_env = getenv("filesize");^M
+               ulong filesize = simple_strtoul(str_env, NULL, 16);^M
+               size_t blocksize = nand_info[0].erasesize;^M
+               ulong wsize=(filesize/blocksize+1)*blocksize;^M
+               cmd_yaffs_umount(mntpoint);^M
+               printf("longbon  filename=%s  str_env=%s filesize=%lx wsize=%lx \n",filename,str_env,filesize,wsize);^M
+       return wsize;^M
+^M
+}^M
+^M
+int lonbon_pattition_firmware_size(unsigned char cmd, char *part_name, int bad_number)^M
+{^M
+       char firmware_name[32] = {0};^M
+       char *firmware_part_name = &firmware_name[0];^M
+       uint part_offset, part_size;^M
+       ulong firmware_size, firmware_size_bad;^M
+       size_t blocksize = nand_info[0].erasesize;^M
+^M
+       /* get firmware name */^M
+       lbcmd_get_imagename_by_cmd(firmware_part_name, cmd);^M
+       /* get firmware size */^M
+       firmware_size = lonbon_get_pattition_firmware_size(firmware_part_name);^M
+       /* the size after adding the bad block */^M
+       firmware_size_bad = firmware_size +( blocksize * bad_number);^M
+       /* get partitions total size */^M
+       lonbon_get_partitions(part_name, &part_offset, &part_size);^M
+^M
+       /* partitions total size > firmware size add bad block size */^M
+       if( part_size > firmware_size_bad)^M
+       {^M
+       printf("\nlonbon %s is OK! part_size=%x firmware_size_bad=%lx \n",__func__,part_size,firmware_size_bad);^M
+       return 1;^M
+       }^M
+       else {^M
+       printf("\nlonbon %s error!! part_size=%x firmware_size_bad=%lx \n",__func__,part_size,firmware_size_bad);^M
+       return -1;^M
+       }^M
+       return 0;^M
+}^M
+^M
+void lonbon_printf_bad_block(lb_bad_partition_t *lb_bad_partition, int number, ulong *bad_list, int new_number, ulong *new_bad_list){^M
+^M
+       int i, ret, flags = 0;^M
+       char write[20] = {' '};^M
+       char *write_t = &write[0];^M
+       char part_name[10] = {'0'};^M
+       char *part_name_t = &part_name[0];^M
+       ulong *badblock_list = bad_list;^M
+       char commandline[30] = {0};^M
+       uint lbflash_offset = 0,lbflash_size = 0;^M
+^M
+       if(new_number > 0){^M
+       lonbon_printf_bad(1);^M
+       }^M
+       for(i=0; i< number; i++){^M
+               memset(part_name,0,sizeof(part_name));^M
+               lonbon_get_partitions_name((uint *) *(badblock_list+i), part_name_t, &lbflash_offset, &lbflash_size);^M
+               printf("bad[%d]=0x%08lx name=%s off=0x%08x size=0x%08x end=0x%08x \n",^M
+                       i, *(badblock_list+i), part_name_t, lbflash_offset, lbflash_size ,(lbflash_offset +lbflash_size -1) );^M
+       }^M
+       if(new_number > 0){^M
+       lonbon_printf_bad(2);^M
+               for(i=0; i< new_number; i++){^M
+               printf(" 0x%08lx \n", *(new_bad_list + i));^M
+               }^M
+       }^M
+       if(lb_bad_partition->factory > 0){^M
+       printf("\n warn factory partition are bad blocks !!!\n\n");^M
+       }^M
+       if(lb_bad_partition->uboot > 0){^M
+       printf("\n warn uboot partition are bad blocks !!!\n\n");^M
+       ret = lonbon_pattition_firmware_size(1,"uboot",lb_bad_partition->uboot);^M
+               if(ret > 0){^M
+               strcat(write,"1 ");^M
+               flags++;^M
+               }else{^M
+               printf("\n%s error!!!uboot insufficient partition space !!!\n",__func__ );^M
+               }^M
+       }^M
+       if(lb_bad_partition->kernel > 0){^M
+       printf("\n warn kernel partition are bad blocks !!!\n\n");^M
+       ret = lonbon_pattition_firmware_size(2,"kernel",lb_bad_partition->kernel);^M
+               if(ret > 0){^M
+               strcat(write,"2 ");^M
+               flags++;^M
+               }else{^M
+               printf("\n%s error!!!kernel insufficient partition space !!!\n",__func__ );^M
+               }^M
+       }^M
+       if(lb_bad_partition->rootfs > 0){^M
+       printf("\n warn rootfs partition are bad blocks !!!\n\n");^M
+       ret = lonbon_pattition_firmware_size(3,"rootfs",lb_bad_partition->rootfs);^M
+               if(ret > 0){^M
+               strcat(write,"3 ");^M
+               flags++;^M
+               }else{^M
+               printf("\n%s error!!!rootfs insufficient partition space !!!\n",__func__ );^M
+               }^M
+       }^M
+       if(lb_bad_partition->backup > 0){^M
+       printf("\n warn backup partition are bad blocks !!!\n\n");^M
+       }^M
+       if(lb_bad_partition->ro > 0){^M
+       printf("\n warn ro partition are bad blocks !!!\n\n");^M
+       }^M
+       if(lb_bad_partition->rw > 0){^M
+       printf("\n warn rw partition are bad blocks !!!\n\n");^M
+       }^M
+       if(lb_bad_partition->ipl > 0){^M
+       printf("\n warn ipl partition are bad blocks !!!\n\n");^M
+       ret = lonbon_pattition_firmware_size(6,"ipl",lb_bad_partition->ipl);^M
+               if(ret > 0){^M
+               strcat(write,"6 ");^M
+               flags++;^M
+               }else{^M
+               printf("\n%s error!!!ipl insufficient partition space !!!\n",__func__ );^M
+               }^M
+       }^M
+       if(lb_bad_partition->ipl_cust > 0){^M
+       printf("\n warn ipl_cust partition are bad blocks !!!\n\n");^M
+       ret = lonbon_pattition_firmware_size(7,"ipl",lb_bad_partition->ipl_cust);^M
+               if(ret > 0){^M
+               strcat(write,"7 ");^M
+               flags++;^M
+               }else{^M
+               printf("\n%s error!!!ipl_cust insufficient partition space !!!\n",__func__ );^M
+               }^M
+       }^M
+       if(lb_bad_partition->logo > 0){^M
+       printf("\n warn logo partition are bad blocks !!!\n\n");^M
+       ret = lonbon_pattition_firmware_size(8,"logo",lb_bad_partition->logo);^M
+               if(ret > 0){^M
+               //run_command("lbupgrade write 8", 0);^M
+               strcat(write,"8 ");^M
+               flags++;^M
+               }else{^M
+               printf("\n%s error!!!logo insufficient partition space !!!\n",__func__ );^M
+               }^M
+       }^M
+^M
+       if (flags > 0){^M
+       sprintf(commandline,"lbupgrade write %s", write_t);^M
+       printf("\nlonbon %s run_command: %s !!!\n", __func__ , commandline);^M
+       run_command(commandline, 0);^M
+       }^M
+^M
+       lonbon_printf_bad(3);^M
+^M
+}^M
+^M
+/* bad block inspection */^M
+int run_lbbadblock(void) ^M
+{^M
+       lb_bad_partition_t lb_bad_partition ={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};^M
+       lb_bad_partition_t *lb_bad_partition_r = &lb_bad_partition;^M
+       int ret, i;^M
+       char part_name[10] = {'0'};^M
+       char *part_name_t = &part_name[0];^M
+       uint lbflash_offset = 0,lbflash_size = 0;^M
+       ulong badblock_list[BADBLOCK_MAX];^M
+       ulong *list_badblock = &badblock_list[0];^M
+       int badblock_number , lb_badnum;^M
+       bool new_badblock = false;^M
+^M
+       lonbon_printf_bad(0);^M
+       memset(badblock_list,0,sizeof(badblock_list));^M
+       badblock_number = lb_nand_get_badblock_number(list_badblock);^M
+       ulong bad_list[badblock_number];^M
+       ulong *bad_list_t = &bad_list[0];^M
+^M
+       for( i = 0; i < badblock_number; i++){^M
+       bad_list[i] = badblock_list[i];^M
+       }^M
+^M
+       if(badblock_number < 0){^M
+               printf("error! get badblock number failed! :%d\n",badblock_number);^M
+               return badblock_number;^M
+       }else{^M
+               printf("bad badblock  number: %d\n",badblock_number);^M
+       }^M
+^M
+       lb_badnum = lonbon_get_badnum();/* get lb_badnum */^M
+       if(lb_badnum < 0){ /* the first burning is not processed */^M
+^M
+               ret = lonbon_set_badnum(badblock_number);/* directly save the number of burned blocks */^M
+               if(ret < 0){^M
+               printf("error %s badblock_number=null\n",__func__);^M
+               }^M
+               printf("lonbon %s init badblock\n",__func__);^M
+               ret = lonbon_set_bad_offset(badblock_number, list_badblock);/* save bad block address*/^M
+               lonbon_printf_bad(3);^M
+               return 0;^M
+^M
+       }else{   /* after the second boot, go here */^M
+               if(badblock_number == lb_badnum){ /* equal means there are no bad blocks */^M
+                       printf("lonbon %s not new badblock\n",__func__);^M
+^M
+               }else{                            /* unequal means there are bad blocks */^M
+                       printf("%s new badblock number= %d\n",__func__, badblock_number - lb_badnum);^M
+                       ret = lonbon_set_badnum(badblock_number);^M
+                       if(ret < 0){^M
+                       printf("error %s badblock_number=null\n",__func__);^M
+                       }else{^M
+                       new_badblock = true; /* mark the newly added bad block symbol */^M
+                       }^M
+               }^M
+       }^M
+^M
+       if(new_badblock == true ){/* there are new bad blocks added */^M
+               /* Get env bad block address */^M
+               ret = lonbon_get_bad_offset(badblock_number, list_badblock ,badblock_number - lb_badnum);^M
+^M
+               for(i=0; i< badblock_number - lb_badnum; i++){^M
+                       memset(part_name,0,sizeof(part_name));^M
+                       lonbon_get_partitions_name((uint *) badblock_list[i], part_name_t, &lbflash_offset, &lbflash_size);^M
+                       ret = lonbon_set_partitions(lb_bad_partition_r, part_name_t);^M
+               }^M
+               printf("%s new_badblock=true\n",__func__);^M
+^M
+       }^M
+^M
+       lonbon_printf_bad_block(lb_bad_partition_r, badblock_number, bad_list_t, badblock_number - lb_badnum, list_badblock);^M
+^M
+       if(new_badblock == true){/* if a new bad block is added, restart and enter restore mode */^M
+               ret = lonbon_set_bad_offset(badblock_number, bad_list_t);/* save bad block address */^M
+               new_badblock = false;^M
+               run_command("reset", 0);^M
+       }^M
+       return 0;^M
+}^M
diff --git a/boot/common/cmd_mtdparts.c b/boot/common/cmd_mtdparts.c
index f6940a6f2..172750152 100755
--- a/boot/common/cmd_mtdparts.c
+++ b/boot/common/cmd_mtdparts.c
@@ -1331,6 +1331,63 @@ int lonbon_get_partitions(const char *part_name, uint *part_offset, uint *part_s}return -1;}
+
+int lonbon_strcpy_name(char *part_name,char *name)
+{
+       char str[10];
+       int len,i;
+               strcpy(str,name);
+               len = strlen(str);
+               for(i=0; i < len; i++){
+                       *(part_name+i) = str[i];
+               }
+       return 0;
+}
+/**
+* obtain the partition name of the address by passing it through.
+*/
+
+int lonbon_get_partitions_name(uint *off, char *part_name, uint *part_offset, uint *part_size)
+{
+       struct list_head *dentry, *pentry;
+       struct part_info *part;
+       struct mtd_device *dev;
+       int part_num;
+       uint *part_offset_closure;
+
+       if (!part_name) {
+               printf("the part name is empty\n");
+               //return -1;
+       }
+
+       if (list_empty(&devices)) {
+               printf("the partitions list is empty\n");
+               return -1;
+       }
+
+       if (mtdparts_init() != 0)
+               return -1;
+
+       list_for_each(dentry, &devices) {
+               dev = list_entry(dentry, struct mtd_device, link);
+               part_num = 0;
+               list_for_each(pentry, &dev->parts) {
+                       part = list_entry(pentry, struct part_info, link);
+                       //printf("%2d:%s 0x%08llx 0x%08llx\n",part_num, part->name, part->size,part->offset);
+                       part_offset_closure = part->offset + part->size;
+                       if(part_offset_closure > off){
+
+                                       lonbon_strcpy_name(part_name,part->name);
+                                       *part_offset = part->offset;
+                                       *part_size   = part->size;
+                                       return 0;
+                               }
+                               part_num++;
+               }
+       }
+       return -1;
+}
+#endif/*** Format and print out a partition list for each device from global device
diff --git a/boot/common/cmd_nand.c b/boot/common/cmd_nand.c
index 64b0bd26b..022696de3 100755
--- a/boot/common/cmd_nand.c
+++ b/boot/common/cmd_nand.c
@@ -718,10 +718,14 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])nand = &nand_info[dev];if (strcmp(cmd, "bad") == 0) {
-               printf("\nDevice %d bad blocks:\n", dev);
+               int j = 0;
+               //printf("\nDevice %d bad blocks:\n", dev);for (off = 0; off < nand->size; off += nand->erasesize)
-                       if (nand_block_isbad(nand, off))
+                       if (nand_block_isbad(nand, off)){printf("  %08llx\n", (unsigned long long)off);
+                               j++;
+                       }
+               printf("bad number %d blocks:\n", j);return 0;}@@ -1466,6 +1470,31 @@ static int lb_nand_erase(uint start_addr, uint part_size, uint length)return 0;}
+#define BADBLOCK_MAX 200
+int lb_nand_get_badblock_number(ulong *badblock_list)
+{
+       int j = 0;
+       ulong off,badblock_addr[BADBLOCK_MAX];
+       nand_info_t *nand = &nand_info[0];
+       char commandline[16];
+       char badb_addr[1024];
+       memset(badblock_addr,0,sizeof(badblock_addr));
+       memset(commandline,0,sizeof(commandline));
+       memset(badb_addr,0,sizeof(badb_addr));
+       printf("\n");
+       for (off = 0; off < nand->size; off += nand->erasesize)
+               if (nand_block_isbad(nand, off)){
+                       //printf("lonbon bad blocks  %08llx\n", (unsigned long long)off);
+                       badblock_addr[j] = off;
+                       j++;
+               }
+       printf("\n");
+       for(int i = 0; i < j; i++){
+       //printf("\nlonbon %08lx\n", badblock_addr[i]);
+       badblock_list[i] = badblock_addr[i];
+       }
+       return j;
+}int lb_nand_flash_partition_baseAddr(const char *part_name, uint *part_offset, uint *part_size){
@@ -1492,7 +1521,7 @@ int lb_nand_flash_partition_read(const char *part_name,char* buff,const int lengreturn -1;}-    ret=lb_nand_read(lbflash_offset,lbflash_size, length>lbflash_size?lbflash_size:len,(void *) buff);
+    ret = lb_nand_read(lbflash_offset,lbflash_size, length>lbflash_size?lbflash_size:len,(void *) buff);//_print_hex_string(buff,length); //TEST ONLYreturn ret;}
diff --git a/boot/include/configs/infinity2m.h b/boot/include/configs/infinity2m.h
index c5d5d8ea1..19a44747b 100755
--- a/boot/include/configs/infinity2m.h
+++ b/boot/include/configs/infinity2m.h
@@ -39,6 +39,7 @@#define LONBONVOIP#ifdef LONBONVOIP#define CONFIG_CMD_LBCHK
+#define CONFIG_CMD_LBBAD#define CONFIG_LB_MD5#define CONFIG_IDENT_STRING     " LonBon Technology "#define LONBONVOIP_REALM       "voip.lonbon.com"

========================================================================

第一次开机

 第二次开机

第N次开机后产生新坏块

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处:http://www.mzph.cn/news/889383.shtml

如若内容造成侵权/违法违规/事实不符,请联系多彩编程网进行投诉反馈email:809451989@qq.com,一经查实,立即删除!

相关文章

鸿蒙ArkTS如何实现数据可视化:饼状图/柱状图/折线图

鸿蒙数据可视化系列 在我们鸿蒙APP开发中&#xff0c;经常需要使用到一些图表的开发&#xff0c;本文主要介绍使用 McCharts 框架绘制柱状图的方法 配套指导视频地址&#xff1a;鸿蒙数据可视化系列-McCharts使用介绍_哔哩哔哩_bilibili 1. 第三方库介绍 1.1. McCharts Mc…

unity打包sdk热更新笔记

Unity3D项目Plugins目录组织 https://blog.csdn.net/linxinfa/article/details/102978005 IPreprocessBuild 继承提供打包前&#xff0c;打包后接口 BuildAssetBundles UnityWebRequest’s DownloadHandlerAssetBundle / LoadFromFile / LoadFromMemoryAsync 数据完整性校…

使用秘钥登录服务器

在我们测试或生产环境中&#xff0c;为了服务器安全性&#xff0c;有时可能需要以 SSH 密钥的方式登录服务器&#xff0c;接下来&#xff0c;将演示如何通过 SSH 私钥的方式来远程服务器。 一、远程服务器生成密钥对 1、首先在目标远程服务器下生成 SSH 密钥对 ssh-keygen然…

谷粒商城—分布式基础

1. 整体介绍 1)安装vagrant 2)安装Centos7 $ vagrant init centos/7 A `Vagrantfile` has been placed in this directory. You are now ready to `vagrant up` your first virtual environment! Please read the comments in the Vagrantfile as well as documentation on…

TimesFM(Time Series Foundation Model)安装(2)

TimesFM&#xff08;Time Series Foundation Model&#xff09;安装简介 readme TimesFM&#xff08;Time Series Foundation Model&#xff09;安装简介&#xff08;1&#xff09;-CSDN博客https://blog.csdn.net/chenchihwen/article/details/144359861?spm1001.2014.3001…

Cesium进阶教程——自定义图形、外观、绘图基础、现有着色器移植至Cesium、ShadowMapping、视频GIS、模型压平、卷帘

基础必看 https://blog.csdn.net/m0_55049655/article/details/139720401 参考路线 http://www.xt3d.online/tutorial/further/article.html 自定义图形 https://blog.csdn.net/m0_55049655/article/details/138908327 https://blog.csdn.net/m0_55049655/article/details/14…

国际荐酒师(香港)协会亮相第六届地博会助力中欧地标交流合作

国际荐酒师&#xff08;香港&#xff09;协会亮相第六届知交会暨地博会&#xff0c;助力中欧地理标志产品交流合作 12月9日&#xff0c;第六届粤港澳大湾区知识产权交易博览会暨国际地理标志产品交易博览会&#xff08;以下简称“第六届知交会暨地博会”&#xff09;在中新广州…

spring boot之@Import注解的应用

我们知道spring boot会通过ComponentScan定义包扫描路径进行业务定义的bean的加载&#xff0c;但是对于很多不在此包路径下定义的bean怎么办呢&#xff1f;比如其他jar包中定义的。这时候import就发挥作用了&#xff0c;通过它也可以实现bean的定义。具体是怎么做的呢&#xff…

【Liunx篇】基础开发工具 - vim

文章目录 一.vim的基本概念1.正常/命令模式2.插入模式3.底行模式/末行模式4.视图模式5.替换模式 二.vim的基本操作1.进入vim&#xff1a;2.退出vim: 三.vim正常模式命令集1.光标定位&#xff1a;2.复制/粘贴3.撤销4.剪切/删除5. 更改 四.vim底行模式命令集1.保存/退出2.调出行号…

Windows安装WSL子系统及docker,以及WSL和docker配置、使用及问题解决

在Windows操作系统中,Ubuntu子系统(也称为Windows Subsystem for Linux, WSL)为开发者提供了一个在Windows环境下运行Linux环境的平台。然而,有时用户在按照Ubuntu子系统或者使用WSL时,可能会遇到各种问题,下面总结一下解决方式。 想要在Windows上安装Docker(实际上是基…

【Golang】Go语言编程思想(六):Channel,第三节,使用Channel实现树的遍历

使用 Channel 实现树的遍历 tree 在此处简单回顾一下之前学过的二叉树遍历&#xff0c;首先新建一个名为 tree 的目录&#xff0c;并在其下对文件和子目录进行如下组织&#xff1a; 其中 node.go 存放的是 Node 的定义&#xff1a; package treeimport "fmt"type…

IDEA 2024 版本配置热部署

在实际开发过程中&#xff0c;每次修改代码就得将项目重启&#xff0c;重新部署&#xff0c;对于一些大型应用来说&#xff0c;重启时间需要花费大量的时间成本。对于一个后端开发者来说&#xff0c;重启过程确实很难受啊 采用下面三步骤可以完成 1.在IDEA中settings中搜索Debb…

【目标跟踪】DUT Anti-UAV数据集详细介绍

DUT Anti-UAV数据集是大连理工大学的团队公开的数据集&#xff08;DUT是他们学校的简称&#xff09;&#xff0c;其中包括了两个子数据集&#xff1a;目标检测和目标跟踪&#xff08;也就是说&#xff0c;目标检测和目标跟踪都可以用这个数据集&#xff09;。该数据集为可见光模…

经典多模态模型CLIP - 直观且详尽的解释

阅读原文 在本文中&#xff0c;您将了解“contrastive language-image pre-training”&#xff08;CLIP&#xff09;&#xff0c;这是一种创建视觉和语言表示的策略&#xff0c;效果非常好&#xff0c;可用于制作高度特定且性能卓越的分类器&#xff0c;而无需任何训练数据。本…

探索云原生安全解决方案的未来

我们是否充分意识到云端所面临的网络安全威胁&#xff1f; 在当今互联互通的世界中&#xff0c;维护安全的环境至关重要。云的出现扩大了潜在威胁的范围&#xff0c;因为它催生了机器身份&#xff08;称为非人类身份 (NHI)&#xff09;及其秘密。随着组织越来越多地转向云原生…

项目组件框架介绍[etcd]

文章目录 前言etcd安装Ubuntu 上通过包管理器安装通过源码安装配置 客户端开发包开发包的安装接口介绍添加一个键值对获取一个键值对租约保活机制监听 封装服务注册与发现服务注册服务发现 前言 Etcd 是一个 golang 编写的分布式、高可用的一致性键值存储系统&#xff0c;用于配…

在Windows 10中使用SSH远程连接服务器(附花生壳操作方法)

SSH 在 linux 中是一种重要的系统组件&#xff0c;用户可以使用 SSH 来远程连接 linux 系统的计算机&#xff0c;或者传输文件。不过在 win10 以前&#xff0c;windows 并不原生支持 SSH&#xff0c;需要借助第三方工具来使用 SSH 功能。而实际上&#xff0c;微软在 2015 年就曾…

【环境搭建】Jeecg-Boot v3.5.0 Docker搭建

前言 最近需要复现JeecgBoot的SQL注入漏洞&#xff0c;必须要搭建JeecgBoot v3.5.0这个版本才行&#xff0c;DockerHub没人push这个版本的&#xff0c;相关博客也比较少&#xff0c;所以自己来搭建&#xff0c;记录一下过程。 前置环境 Ubuntu 20.04Docker version 27.3.1do…

【人工智能基础06】人工神经网络(练习题):神经网络的计算、激活函数的选择与神经网络的退化

文章目录 1. 基于神经网络计算心理健康程度2. 添加激活函数的神经网络计算3. 使用神经网络预测小胖是否会变胖4. 激活函数选择的讨论5. 神经网络的设计6. 深度线性模型的表达能力线性模型7. 神经网络退化 主要讨论的内容 什么是人工神经网络&#xff0c;相关计算反向传播算法的…

STM32 串口收发文本数据包

单片机学习&#xff01; 目录 前言 一、文本数据包格式 二、串口收发文本数据包代码 三、代码解析 3.1 标志位清除 3.2 数据包接收 四、代码问题改进 总结 前言 本文介绍了串口收发文本数据包程序设计的思路并详解代码作用。 一、文本数据包格式 文本数据包的格式的定义…