目的：telnet远程管理设备
LSW1配置

[Huawei]int Vlanif 1
[Huawei-Vlanif1]ip add 1.1.1.1 24
[Huawei-Vlanif1]q
[Huawei]user-interface vty 0 4
[Huawei-ui-vty0-4]authentication-mode aaa
[Huawei-ui-vty0-4]q
[Huawei]aaa
[Huawei-aaa]local-user admin password cipher admin
[Huawei-aaa]local-user admin service-type telnet
[Huawei-aaa]local-user admin privilege level 15
[Huawei]telnet server enable
[Huawei]int GigabitEthernet 0/0/1
[Huawei-GigabitEthernet0/0/1]port link-type access
[Huawei-GigabitEthernet0/0/1]port default vlan 1

Cloud1配置







注意：
如果没有1.1.1.2这块刚刚配置的回环网卡可以先卸载WinPcap_4_1_3.exe再重装WinPcap_4_1_3.exe，重新打开eNSP Cloud1就能识别到回环网卡了

物理机测试：成功远程到华为交换机