多盘配置


<path>/var/lib/clickhouse/</path><storage_configuration><disks><disk_name_1><path>/mnt/A123456/data/</path></disk_name_1></disks><policies><policy_name_1><volumes><volume_name_0><disk>disk_name_1</disk></volume_name_0></volumes></policy_name_1></policies>
</storage_configuration>

但是还有个位置，zk的多副本配置了怎么弄，还有就是如何读data。

查看存储策略

select policy_name,volume_name,disks from system.storage_policies


┌─policy_name───┬─volume_name───┬─disks───────────┐
│ default       │ default       │ ['default']     │
│ policy_name_1 │ volume_name_0 │ ['disk_name_1'] │
└───────────────┴───────────────┴─────────────────┘

生成mergeTree表写数据

CREATE TABLE myFirstReplacingMT
(`key` Int64,`someCol` String,`eventTime` DateTime
)
ENGINE = ReplacingMergeTree
ORDER BY key SETTINGS storage_policy = 'policy_name_1';INSERT INTO myFirstReplacingMT Values (1, 'first', '2020-01-01 01:01:01');
INSERT INTO myFirstReplacingMT Values (1, 'second', '2020-01-01 00:00:00');

查看位置

SELECTname,data_paths,metadata_path,storage_policy
FROM system.tables
WHERE name LIKE 'myFir%'

从文件导入

换一个简单的表 test_batch

CREATE TABLE test_batch (a Int64,b Int64) 
ENGINE = ReplacingMergeTree() ORDER BY a

由clickhouse-local生成数据

sudo echo -e "1,2\n2,3" | clickhouse-local --input-format "CSV" -S "a Int64,b Int64" -N "tmp_table" -q "CREATE TABLE test_batch (a Int64,b Int64) ENGINE = ReplacingMergeTree() ORDER BY a;INSERT INTO TABLE test_batch SELECT a,b FROM tmp_table;" --logger.console --path /tmp/test/testlocal/

ls testlocal/data/_local/test_batch/all_1_1_0/

checksums.txt  columns.txt  count.txt  data.bin  data.cmrk3  default_compression_codec.txt  metadata_version.txt  primary.cidx  serialization.json

拷贝到server上，查看一下存储位置

SELECTname,data_paths,metadata_path,storage_policy
FROM system.tables
WHERE name LIKE 'test_batch%'

拷贝到data_paths下detached文件夹

 sudo cp -r ./testlocal/data/_local/test_batch/all_1_1_0/ /mnt/xxx/data/store/xxx/detached/

然后在service上：

ALTER TABLE test_batch ATTACH PART 'all_1_1_0';

导入进去了，看看分区（我这里已经重复操作了3次，也就是导入了3次）


SELECTpartition,name,active
FROM system.parts
WHERE table = 'test_batch'Query id: 111┌─partition─┬─name──────┬─active─┐
│ tuple()   │ all_1_1_0 │      1 │
│ tuple()   │ all_2_2_0 │      1 │
│ tuple()   │ all_3_3_0 │      1 │
└───────────┴───────────┴────────┘