华为eNSP网络模拟器

华为eNSP网络模拟器安装详细教程（2024）

华为eNSP网络模拟器安装详细教程（2024）_ensp安装-CSDN博客

eNSP设备基础配置

eNSP设备基础配置_ensp中路由器交换机pc机配置ip地址-CSDN博客

ENSP学习

ENSP学习-CSDN博客

【华为eNSP模拟器】交换机原理与基础命令_交换机模拟器-CSDN博客

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys
[Huawei]sysname SW
[SW]inter e
Apr 11 2024 14:26:14-08:00 SW DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 4, the ch
ange loop count is 0, and the maximum number of records i
[SW]inter e0/0/1
[SW-Ethernet0/0/1]q
[SW]vlan 10
[SW-vlan10]
Apr 11 2024 14:29:24-08:00 SW DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 5, the ch
ange loop count is 0, and the maximum number of records is 4095.
[SW-vlan10]q
[SW]interface gi
[SW]interface GigabitEthernet
^
Error:Incomplete command found at '^' position.
[SW]inter gi
[SW]inter GigabitEthernet 0/0/1
[SW-GigabitEthernet0/0/1]port link-type access
[SW-GigabitEthernet0/0/1]
Apr 11 2024 14:30:24-08:00 SW DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 6, the ch
ange loop count is 0, and the maximum number of records is 4095.
[SW-GigabitEthernet0/0/1]port default vlan 10
[SW-GigabitEthernet0/0/1]q
[SW]port default vlan 10
Apr 11 2024 14:30:44-08:00 SW DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 7, the ch
ange loop count is 0, and the maximum number of records is 4095.
^
Error:Ambiguous command found at '^' position.
[SW]inter GigabitEthernet 0/0/2
[SW-GigabitEthernet0/0/2]port link-type access
[SW-GigabitEthernet0/0/2]
Apr 11 2024 14:31:14-08:00 SW DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 8, the ch
ange loop count is 0, and the maximum number of records is 4095.
[SW-GigabitEthernet0/0/2]default vlan 10
^
Error: Unrecognized command found at '^' position.
[SW-GigabitEthernet0/0/2]port default vlan 10
[SW-GigabitEthernet0/0/2]
Apr 11 2024 14:31:54-08:00 SW DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 9, the ch
ange loop count is 0, and the maximum number of records is 4095.
[SW-GigabitEthernet0/0/2]q
[SW]mac-ad
[SW]mac-address 5489-985C-5FA4 gi
[SW]mac-address 5489-985C-5FA4 gi
^
Error: Unrecognized command found at '^' position.
[SW]mac-address static 5489-985C-5FA4 gi
^
Error:Incomplete command found at '^' position.
[SW]mac-address static 5489-985C-5FA4 gi
[SW]mac-address static 5489-985C-5FA4 GigabitEthernet 0/0/1 vlan 10
[SW]
Apr 11 2024 14:35:04-08:00 SW DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 10, the c
hange loop count is 0, and the maximum number of records is 4095.
[SW]mac-address static 5489-9836-06DF GigabitEthernet 0/0/2 vlan 10
[SW]
Apr 11 2024 14:38:54-08:00 SW DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 11, the c
hange loop count is 0, and the maximum number of records is 4095.
[SW]undo
[SW]undo d
[SW]undo dhcp-snooping
[SW]undo dldp
[SW]undo dns
[SW]undo drop
[SW]undo drop-profile
[SW]undo dhcp
[SW]undo dot1x
[SW]undo diffserv
[SW]undo domain
[SW]undo dhcpv6
[SW]undo dsa
[SW]undo debugging
[SW]undo dhcp-snooping
[SW]undo dldp
[SW]undo dns
[SW]undo drop
[SW]undo drop-profile
[SW]undo dhcp
[SW]undo ter
[SW]undo terminal
[SW]undo terminal m
[SW]undo terminal monitor
^
Error: Unrecognized command found at '^' position.
[SW]q
<SW>undo terminal monitor
Info: Current terminal monitor is off.
<SW>sys
Enter system view, return user view with Ctrl+Z.
[SW]disp
[SW]display s
[SW]display stp
[SW]display sub-vlan
[SW]display super-vlan
[SW]display sep
[SW]display synchronization-result
[SW]display smart-link
[SW]display snmp-agent
[SW]display storm-control
[SW]display service-scheme
[SW]display startup
[SW]display saved-configuration
[SW]display ssh
[SW]display scp-client
[SW]display schedule
[SW]display script-string
[SW]display stp
[SW]display sub-vlan
[SW]display super-vlan
[SW]display sep
[SW]display synchronization-result
[SW]display smart-link
[SW]display snmp-agent
[SW]display storm-control
[SW]display service-scheme
[SW]display startup
[SW]display saved-configuration
[SW]disp hi
[SW]disp history-command
port link-type access
default vlan 10
port default vlan 10
mac-address 5489-985C-5FA4 gi
mac-address static 5489-985C-5FA4 gi
mac-address static 5489-985C-5FA4 GigabitEthernet 0/0/1 vlan 10
mac-address static 5489-9836-06DF GigabitEthernet 0/0/2 vlan 10
q
undo terminal monitor
sys
[SW]

The device is running!

<Huawei>undo terminal mon
<Huawei>undo terminal monitor
Info: Current terminal monitor is off.
<Huawei>disp his
<Huawei>disp history-command
undo display
undo terminal monitor
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys
[Huawei]sysname s5700
[s5700]vlan 10
[s5700-vlan10]disp hi
[s5700-vlan10]disp history-command
undo display
undo terminal monitor
disp history-command
sys
sysname s5700
vlan 10
[s5700-vlan10]q
[s5700]disp history-command
undo display
undo terminal monitor
sys
sysname s5700
vlan 10
disp history-command
q
[s5700]display inter
[s5700]display interface brief
PHY: Physical
*down: administratively down
(l): loopback
(s): spoofing
(b): BFD down
(e): ETHOAM down
(dl): DLDP down
(d): Dampening Suppressed
InUti/OutUti: input utility/output utility
Interface PHY Protocol InUti OutUti inErrors outErrors
GigabitEthernet0/0/1 up up 0% 0% 0 0
GigabitEthernet0/0/2 up up 0% 0% 0 0
GigabitEthernet0/0/3 down down 0% 0% 0 0

Error: Wrong parameter found at '^' position.
[s5700]inte
[s5700]interface G
[s5700]interface GigabitEthernet 0/0/1
[s5700-GigabitEthernet0/0/1]port link-type access
[s5700-GigabitEthernet0/0/1]port default vlan 10
[s5700-GigabitEthernet0/0/1]q
[s5700]inte

[s5700]inter
[s5700]interface G
[s5700]interface GigabitEthernet 0/0/2
[s5700-GigabitEthernet0/0/2]port link-type access
[s5700-GigabitEthernet0/0/2]port def
[s5700-GigabitEthernet0/0/2]port default vlan 10
[s5700-GigabitEthernet0/0/2]q

[s5700]disp history-command
vlan 10
disp history-command
display interface brief
interface ge0/0/1
interface GigabitEthernet 0/0/1
interface GE0/0/2
interface GigabitEthernet 0/0/2
port link-type access
port default vlan 10
q

Error: Unrecognized command found at '^' position.
[s5700]disp mac-a
[s5700]disp mac-address
MAC address table of slot 0:
-------------------------------------------------------------------------------
MAC Address VLAN/ PEVLAN CEVLAN Port Type LSP/LSR-ID
VSI/SI MAC-Tunnel
-------------------------------------------------------------------------------
5489-98dd-1c17 10 - - GE0/0/1 dynamic 0/-
5489-981f-4294 10 - - GE0/0/2 dynamic 0/-
-------------------------------------------------------------------------------
Total matching items on slot 0 displayed = 2

[s5700]disp h
[s5700]disp hwtacacs-server
[s5700]disp history-command
interface ge0/0/1
interface GigabitEthernet 0/0/1
interface GE0/0/2
interface GigabitEthernet 0/0/2
port link-type access
port default vlan 10
q
disp history-command
arp -a
disp mac-address

<s5700>display history-command
port link-type access
port default vlan 10
arp -a
disp mac-address
disp history-command
disp history-command all
disp history-command 20
history-command 100

Error: Unrecognized command found at '^' position.
<s5700>sys

[s5700]q

<s5700>sys
Enter system view, return user view with Ctrl+Z.
[s5700]inte g
[s5700]inte GigabitEthernet 0/0/1
[s5700-GigabitEthernet0/0/1]q
[s5700]mac
[s5700]mac-
[s5700]mac-address static 54-89-98-DD-1C-1
<s5700>sys
Enter system view, return user view with Ctrl+Z.
[s5700]mac-a
[s5700]mac-address s
[s5700]mac-address static 5489-98DD-1C17 g
[s5700]mac-address static 5489-98DD-1C17 GigabitEthernet 0/0/1 vlan 10
[s5700]mac-address static 5489-981F-4294 g
[s5700]mac-address static 5489-981F-4294 GigabitEthernet 0/0/2 vlan 10
[s5700]mac-a
[s5700]mac-address dis
[s5700]disp mac-a
[s5700]disp mac-address
MAC address table of slot 0:
-------------------------------------------------------------------------------
MAC Address VLAN/ PEVLAN CEVLAN Port Type LSP/LSR-ID
VSI/SI MAC-Tunnel
-------------------------------------------------------------------------------
5489-981f-4294 10 - - GE0/0/2 static -
5489-98dd-1c17 10 - - GE0/0/1 static -
-------------------------------------------------------------------------------
Total matching items on slot 0 displayed = 2

[s5700]