高可用 k8s 1.29 一键安装脚本, 丝滑至极

在这里插入图片描述

博客原文

文章目录

- 集群配置
- - 配置清单
  - 集群规划
  - 集群网络规划
- 环境初始化
- - 主机配置
- 配置高可用ApiServer
- - 安装 nginx
  - 安装 Keepalived
- 安装脚本
- - 需要魔法的脚本
  - 不需要魔法的脚本
  - 配置自动补全
  - 加入其余节点
- 验证集群

集群配置

配置清单

OS： ubuntu 20.04
kubernetes： 1.29.1
Container Runtime：Containerd 1.7.11
CRI: runc 1.10
CNI: cni-plugin 1.4

集群规划

IP	Hostname	配置
192.168.254.130	master01	2C 4G 30G
192.168.254.131	master02	2C 4G 30G
192.168.254.132	node1	2C 4G 30G

集群网络规划

Pod 网络: 10.244.0.0/16
Service 网络: 10.96.0.0/12
Node 网络: 192.168.254.0/24

环境初始化

主机配置

ssh-keygen
ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.254.131
ssh-copy-id -i /root/.ssh/id_rsa.pub root@192.168.254.132# 将节点加入 hosts
cat << EOF >> /etc/hosts
192.168.254.130 master01
192.168.254.131 master02
192.168.254.132 node01
EOF

配置高可用ApiServer

安装 nginx

所有 master 节点都要操作

apt install nginx -y
systemctl status nginx# 修改 nginx 配置文件
cat /etc/nginx/nginx.conf
user user;
worker_processes auto;
pid /run/nginx.pid;
include /etc/nginx/modules-enabled/*.conf;events {worker_connections 768;# multi_accept on;
}#添加了stream 这一段，其他的保持默认即可
stream {log_format  main  '$remote_addr $upstream_addr - [$time_local] $status $upstream_bytes_sent';access_log  /var/log/nginx/k8s-access.log  main;upstream k8s-apiserver {server 192.168.254.130:6443;          #master01的IP和6443端口server 192.168.254.131:6443;          #master02的IP和6443端口}server {listen 16443;                                    #监听的是16443端口，因为nginx和master复用机器，所以不能是6443端口proxy_pass k8s-apiserver;                #使用proxy_pass模块进行反向代理}
}......# 重启 nginx 服务
systemctl restart nginx && systemctl enable nginx && systemctl status nginx# 端口检查
# netstat  -lntup| grep 16443
nc -l -p 16443
#nc: Address already in use

安装 Keepalived

所有 master 节点都要操作

apt install keepalived -y# 写入 nginx 检查脚本
cat << EOF > /etc/keepalived/nginx_check.sh
#!/bin/bash
#1、判断Nginx是否存活
counter=`ps -C nginx --no-header | wc -l`
if [ $counter -eq 0 ]; then#2、如果不存活则尝试启动Nginx./usr/local/nginx/sbin/nginxsleep 2#3、等待2秒后再次获取一次Nginx状态counter=`ps -C nginx --no-header | wc -l`#4、再次进行判断，如Nginx还不存活则停止Keepalived，让地址进行漂移if [ $counter -eq 0 ]; thenkillall keepalivedfi
fi
EOFchmod +x /etc/keepalived/nginx_check.sh

更改 master01 的 keepalived 配置:

cat << EOF > /etc/keepalived/keepalived.conf
global_defs {router_id LVS_DEVELvrrp_skip_check_adv_addrvrrp_garp_interval 0vrrp_gna_interval 0
}vrrp_script chk_nginx {script "/etc/keepalived/nginx_check.sh" ## 检测 nginx 状态的脚本路径interval 2              ## 检测时间间隔weight -20              ## 如果条件成立，权重-20
}vrrp_instance VI_1 {state MASTER                ##主节点为 MASTER，备份节点为 BACKUPinterface ens33             ##绑定 VIP 的网络接口，与本机IP地址所在网络接口相同virtual_router_id 100       ##虚拟路由id，主从节点必须保持一致priority 100                ##节点优先级，直范围0-254，MASTER 要比 BACKUP 高advert_int 1authentication {            ##设置验证信息，两个节点必须一致auth_type PASSauth_pass 123456}track_script {chk_nginx               ##执行 Nginx 监控}virtual_ipaddress {192.168.254.100          ##VIP，两个节点必须设置一样(可设置多个)}
}
EOFsystemctl restart keepalived && systemctl enable keepalived.service
ip a | grep 192.168.254.100

更改 master02 的 keepalived 配置:

cat << EOF > /etc/keepalived/keepalived.conf
global_defs {router_id LVS_DEVELvrrp_skip_check_adv_addrvrrp_garp_interval 0vrrp_gna_interval 0
}vrrp_script chk_nginx {script "/etc/keepalived/nginx_check.sh" ## 检测 nginx 状态的脚本路径interval 2              ## 检测时间间隔weight -20              ## 如果条件成立，权重-20
}vrrp_instance VI_1 {state BACKUP                ##主节点为 MASTER，备份节点为 BACKUPinterface ens33             ##绑定 VIP 的网络接口，与本机IP地址所在网络接口相同virtual_router_id 100       ##虚拟路由id，主从节点必须保持一致priority 90                ##节点优先级，直范围0-254，MASTER 要比 BACKUP 高advert_int 1authentication {            ##设置验证信息，两个节点必须一致auth_type PASSauth_pass 123456}track_script {chk_nginx               ##执行 Nginx 监控}virtual_ipaddress {192.168.254.100          ##VIP，两个节点必须设置一样(可设置多个)}
}
EOFsystemctl restart keepalived && systemctl enable keepalived.service
ip a | grep 192.168.254.100

安装脚本

**前置条件: ** 脚本中存在拉取国外资源, 需要你配置代理 ==> [如何让虚拟机拥有愉快网络环境](https://ai-feier.github.io/p/%E5%A6%82%E4%BD%95%E8%AE%A9%E8%99%9A%E6%8B%9F%E6%9C%BA%E6%8B%A5%E6%9C%89%E6%84%89%E5%BF%AB%E7%BD%91%E7%BB%9C%E7%8E%AF%E5%A2%83/)

需要:

虚拟机代理
apt 下载代理

需要魔法的脚本

在所有节点执行以下脚本

脚本功能:

时间同步
关闭 swap
启用内核模块
安装 ipvs 并启用内核参数
安装 containerd, runc, cni
更改 containerd 沙箱镜像和 cgroup 并且配置镜像加速
安装最新 kubelet, kubeadm, kubectl

注意: 请先通过export name=master01方式设置当前 node 的 hostname

install.sh:

export name=master01  # 改为你 hostname 的名称, 脚本中删除该行
#!/bin/bashhostnamectl set-hostname $name# 阿里源
mv /etc/apt/sources.list /etc/apt/sources.list.bak
cat <<EOF > /etc/apt/sources.list
deb https://mirrors.aliyun.com/ubuntu/ focal main restricted universe multiverse
deb-src https://mirrors.aliyun.com/ubuntu/ focal main restricted universe multiverse
deb https://mirrors.aliyun.com/ubuntu/ focal-security main restricted universe multiverse
deb-src https://mirrors.aliyun.com/ubuntu/ focal-security main restricted universe multiverse
deb https://mirrors.aliyun.com/ubuntu/ focal-updates main restricted universe multiverse
deb-src https://mirrors.aliyun.com/ubuntu/ focal-updates main restricted universe multiversedeb https://mirrors.aliyun.com/ubuntu/ focal-backports main restricted universe multiverse
deb-src https://mirrors.aliyun.com/ubuntu/ focal-backports main restricted universe multiverse
EOF
apt update# 时间同步
timedatectl set-timezone Asia/Shanghai
#安装chrony，联网同步时间
apt install chrony -y && systemctl enable --now chronyd# 禁用 swap
sudo swapoff -a && sed -i '/swap/s/^/#/' /etc/fstab# 安装 ipvs
apt install -y ipset ipvsadm# 配置需要的内核模块
cat <<EOF | sudo tee /etc/modules-load.d/k8s.conf
overlay
br_netfilter
EOF# 启动模块
sudo modprobe overlay
sudo modprobe br_netfiltercat <<EOF | sudo tee /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-iptables  = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.ipv4.ip_forward                 = 1
EOF# 是 sysctl 参数生效
sudo sysctl --system
# 检验是否配置成功
#lsmod | grep br_netfilter
#lsmod | grep overlay
#sysctl net.bridge.bridge-nf-call-iptables net.bridge.bridge-nf-call-ip6tables net.ipv4.ip_forward# 配置 ipvs 内核参数
cat <<EOF | sudo tee /etc/modules-load.d/ipvs.conf
ip_vs
ip_vs_rr
ip_vs_wrr
ip_vs_sh
nf_conntrack
EOF# 内核加载 ipvs
sudo modprobe ip_vs
sudo modprobe ip_vs_rr
sudo modprobe ip_vs_wrr
sudo modprobe ip_vs_sh
sudo modprobe nf_conntrack
# 确认ipvs模块加载
#lsmod |grep -e ip_vs -e nf_conntrack# 安装 Containerd
wget -c https://github.com/containerd/containerd/releases/download/v1.7.11/containerd-1.7.11-linux-amd64.tar.gz
tar -xzvf containerd-1.7.11-linux-amd64.tar.gz
#解压出来一个bin目录,containerd可执行文件都在bin目录里面
mv bin/* /usr/local/bin/
rm -rf bin#使用systemcd来管理containerd
cat << EOF > /usr/lib/systemd/system/containerd.service
[Unit]
Description=containerd container runtime
Documentation=https://containerd.io
After=network.target local-fs.target[Service]
ExecStartPre=-/sbin/modprobe overlay
ExecStart=/usr/local/bin/containerdType=notify
Delegate=yes
KillMode=process
Restart=always
RestartSec=5# Having non-zero Limit*s causes performance problems due to accounting overhead
# in the kernel. We recommend using cgroups to do container-local accounting.
LimitNPROC=infinity
LimitCORE=infinity# Comment TasksMax if your systemd version does not supports it.
# Only systemd 226 and above support this version.
TasksMax=infinity
OOMScoreAdjust=-999[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload && systemctl enable --now containerd 
#systemctl  status containerd# 安装 runc
#runc是容器运行时，runc实现了容器的init，run，create，ps...我们在运行容器所需要的cmd：
curl -LO https://github.com/opencontainers/runc/releases/download/v1.1.10/runc.amd64 && \
install -m 755 runc.amd64 /usr/local/sbin/runc# 安装 CNI plugins
wget -c https://github.com/containernetworking/plugins/releases/download/v1.4.0/cni-plugins-linux-amd64-v1.4.0.tgz
#根据官网的安装步骤来，创建一个目录用于存放cni插件
mkdir -p /opt/cni/bin
tar -xzvf  cni-plugins-linux-amd64-v1.4.0.tgz -C /opt/cni/bin/# 修改 Containd 配置
#修改containerd的配置，因为containerd默认从k8s官网拉取镜像
#创建一个目录用于存放containerd的配置文件
mkdir -p /etc/containerd
#把containerd配置导出到文件
containerd config default | sudo tee /etc/containerd/config.toml# 修改沙箱镜像
sed -i 's#sandbox_image = "registry.k8s.io/pause:.*"#sandbox_image = "registry.aliyuncs.com/google_containers/pause:3.9"#' /etc/containerd/config.toml
# 修改 cgroup 为 systemd
sed -i 's#SystemdCgroup = false#SystemdCgroup = true#' /etc/containerd/config.toml
# 配置镜像加速
sed -i 's#config_path = ""#config_path = "/etc/containerd/certs.d"#' /etc/containerd/config.toml# 配置 Containerd 镜像源
# docker hub镜像加速
mkdir -p /etc/containerd/certs.d/docker.io
cat > /etc/containerd/certs.d/docker.io/hosts.toml << EOF
server = "https://docker.io"
[host."https://dockerproxy.com"]capabilities = ["pull", "resolve"][host."https://docker.m.daocloud.io"]capabilities = ["pull", "resolve"][host."https://reg-mirror.qiniu.com"]capabilities = ["pull", "resolve"][host."https://registry.docker-cn.com"]capabilities = ["pull", "resolve"][host."http://hub-mirror.c.163.com"]capabilities = ["pull", "resolve"]EOF# k8s.gcr.io镜像加速
mkdir -p /etc/containerd/certs.d/k8s.gcr.io
tee /etc/containerd/certs.d/k8s.gcr.io/hosts.toml << 'EOF'
server = "https://k8s.gcr.io"[host."https://k8s-gcr.m.daocloud.io"]capabilities = ["pull", "resolve", "push"]
EOF#重启containerd
systemctl restart containerd 
#systemctl status containerd# 安装 kubeadm、kubelet、kubectl
# 安装依赖
sudo systemctl restart containerd
sudo apt-get update -y
sudo apt-get install -y apt-transport-https ca-certificates curl gpg mkdir -p /etc/apt/keyrings
curl -fsSL https://pkgs.k8s.io/core:/stable:/v1.29/deb/Release.key | sudo gpg --dearmor -o /etc/apt/keyrings/kubernetes-apt-keyring.gpg
echo 'deb [signed-by=/etc/apt/keyrings/kubernetes-apt-keyring.gpg] https://pkgs.k8s.io/core:/stable:/v1.29/deb/ /' | sudo tee /etc/apt/sources.list.d/kubernetes.listsudo apt-get update -y
sudo apt-get install -y kubelet kubeadm kubectl 
sudo apt-mark hold kubelet kubeadm kubectl# kubelet 开机自启
systemctl enable --now kubelet# 配置 crictl socket
crictl config  runtime-endpoint unix:///run/containerd/containerd.sock
crictl config image-endpoint unix:///run/containerd/containerd.sock

不需要魔法的脚本

前置:

下载我下载好的资源包

CSDN 资源 – 免费
阿里云 OSS
GitLab

资源列表:

资源	原始地址
Container Runtime：Containerd 1.7.11	https://github.com/containerd/containerd/releases/download/v1.7.11/containerd-1.7.11-linux-amd64.tar.gz
CRI: runc 1.10	https://github.com/opencontainers/runc/releases/download/v1.1.10/runc.amd64
CNI: cni-plugin 1.4	https://github.com/containernetworking/plugins/releases/download/v1.4.0/cni-plugins-linux-amd64-v1.4.0.tgz
calico 3.27 : tigera-operator.yaml	https://raw.githubusercontent.com/projectcalico/calico/v3.27.0/manifests/tigera-operator.yaml
calico 3.27 : custom-resources.yaml	https://raw.githubusercontent.com/projectcalico/calico/v3.27.0/manifests/custom-resources.yaml

下载资源:

wget -O k8s1.29.tar.gz https://blog-source-mkt.oss-cn-chengdu.aliyuncs.com/resources/k8s/kubeadm%20init/k8s1.29.tar.gz
tar xzvf k8s1.29.tar.gz
cd workdirexport name=master01  # 改为你 hostname 的名称

在所有节点执行以下脚本

脚本功能:

时间同步
关闭 swap
启用内核模块
安装 ipvs 并启用内核参数
安装 containerd, runc, cni
更改 containerd 沙箱镜像和 cgroup 并且配置镜像加速
安装最新 kubelet, kubeadm, kubectl

注意: 请先通过export name=master01方式设置当前 node 的 hostname

install.sh:

#!/bin/bashhostnamectl set-hostname $name# 阿里源
mv /etc/apt/sources.list /etc/apt/sources.list.bak
cat <<EOF > /etc/apt/sources.list
deb https://mirrors.aliyun.com/ubuntu/ focal main restricted universe multiverse
deb-src https://mirrors.aliyun.com/ubuntu/ focal main restricted universe multiverse
deb https://mirrors.aliyun.com/ubuntu/ focal-security main restricted universe multiverse
deb-src https://mirrors.aliyun.com/ubuntu/ focal-security main restricted universe multiverse
deb https://mirrors.aliyun.com/ubuntu/ focal-updates main restricted universe multiverse
deb-src https://mirrors.aliyun.com/ubuntu/ focal-updates main restricted universe multiversedeb https://mirrors.aliyun.com/ubuntu/ focal-backports main restricted universe multiverse
deb-src https://mirrors.aliyun.com/ubuntu/ focal-backports main restricted universe multiverse
EOF
apt update# 时间同步
timedatectl set-timezone Asia/Shanghai
#安装chrony，联网同步时间
apt install chrony -y && systemctl enable --now chronyd# 禁用 swap
sudo swapoff -a && sed -i '/swap/s/^/#/' /etc/fstab# 安装 ipvs
apt install -y ipset ipvsadm# 配置需要的内核模块
cat <<EOF | sudo tee /etc/modules-load.d/k8s.conf
overlay
br_netfilter
EOF# 启动模块
sudo modprobe overlay
sudo modprobe br_netfiltercat <<EOF | sudo tee /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-iptables  = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.ipv4.ip_forward                 = 1
EOF# 是 sysctl 参数生效
sudo sysctl --system
# 检验是否配置成功
#lsmod | grep br_netfilter
#lsmod | grep overlay
#sysctl net.bridge.bridge-nf-call-iptables net.bridge.bridge-nf-call-ip6tables net.ipv4.ip_forward# 配置 ipvs 内核参数
cat <<EOF | sudo tee /etc/modules-load.d/ipvs.conf
ip_vs
ip_vs_rr
ip_vs_wrr
ip_vs_sh
nf_conntrack
EOF# 内核加载 ipvs
sudo modprobe ip_vs
sudo modprobe ip_vs_rr
sudo modprobe ip_vs_wrr
sudo modprobe ip_vs_sh
sudo modprobe nf_conntrack
# 确认ipvs模块加载
#lsmod |grep -e ip_vs -e nf_conntrack# 安装 Containerd
#wget -c https://github.com/containerd/containerd/releases/download/v1.7.11/containerd-1.7.11-linux-amd64.tar.gz
tar -xzvf containerd-1.7.11-linux-amd64.tar.gz
#解压出来一个bin目录,containerd可执行文件都在bin目录里面
mv bin/* /usr/local/bin/
rm -rf bin#使用systemcd来管理containerd
cat << EOF > /usr/lib/systemd/system/containerd.service
[Unit]
Description=containerd container runtime
Documentation=https://containerd.io
After=network.target local-fs.target[Service]
ExecStartPre=-/sbin/modprobe overlay
ExecStart=/usr/local/bin/containerdType=notify
Delegate=yes
KillMode=process
Restart=always
RestartSec=5# Having non-zero Limit*s causes performance problems due to accounting overhead
# in the kernel. We recommend using cgroups to do container-local accounting.
LimitNPROC=infinity
LimitCORE=infinity# Comment TasksMax if your systemd version does not supports it.
# Only systemd 226 and above support this version.
TasksMax=infinity
OOMScoreAdjust=-999[Install]
WantedBy=multi-user.target
EOF
systemctl daemon-reload && systemctl enable --now containerd 
#systemctl  status containerd# 安装 runc
#runc是容器运行时，runc实现了容器的init，run，create，ps...我们在运行容器所需要的cmd：
#curl -LO https://github.com/opencontainers/runc/releases/download/v1.1.10/runc.amd64 && \
install -m 755 runc.amd64 /usr/local/sbin/runc# 安装 CNI plugins
#wget -c https://github.com/containernetworking/plugins/releases/download/v1.4.0/cni-plugins-linux-amd64-v1.4.0.tgz
#根据官网的安装步骤来，创建一个目录用于存放cni插件
mkdir -p /opt/cni/bin
tar -xzvf  cni-plugins-linux-amd64-v1.4.0.tgz -C /opt/cni/bin/# 修改 Containd 配置
#修改containerd的配置，因为containerd默认从k8s官网拉取镜像
#创建一个目录用于存放containerd的配置文件
mkdir -p /etc/containerd
#把containerd配置导出到文件
containerd config default | sudo tee /etc/containerd/config.toml# 修改沙箱镜像
sed -i 's#sandbox_image = "registry.k8s.io/pause:.*"#sandbox_image = "registry.aliyuncs.com/google_containers/pause:3.9"#' /etc/containerd/config.toml
# 修改 cgroup 为 systemd
sed -i 's#SystemdCgroup = false#SystemdCgroup = true#' /etc/containerd/config.toml
# 配置镜像加速
sed -i 's#config_path = ""#config_path = "/etc/containerd/certs.d"#' /etc/containerd/config.toml# 配置 Containerd 镜像源
# docker hub镜像加速
mkdir -p /etc/containerd/certs.d/docker.io
cat > /etc/containerd/certs.d/docker.io/hosts.toml << EOF
server = "https://docker.io"
[host."https://dockerproxy.com"]capabilities = ["pull", "resolve"][host."https://docker.m.daocloud.io"]capabilities = ["pull", "resolve"][host."https://reg-mirror.qiniu.com"]capabilities = ["pull", "resolve"][host."https://registry.docker-cn.com"]capabilities = ["pull", "resolve"][host."http://hub-mirror.c.163.com"]capabilities = ["pull", "resolve"]EOF# k8s.gcr.io镜像加速
mkdir -p /etc/containerd/certs.d/k8s.gcr.io
tee /etc/containerd/certs.d/k8s.gcr.io/hosts.toml << 'EOF'
server = "https://k8s.gcr.io"[host."https://k8s-gcr.m.daocloud.io"]capabilities = ["pull", "resolve", "push"]
EOF#重启containerd
systemctl restart containerd 
#systemctl status containerd# 安装 kubeadm、kubelet、kubectl
# 安装依赖
sudo apt-get update -y
sudo apt-get install -y apt-transport-https ca-certificates curl gpg mkdir -p /etc/apt/keyrings
curl -fsSL https://pkgs.k8s.io/core:/stable:/v1.29/deb/Release.key | sudo gpg --dearmor -o /etc/apt/keyrings/kubernetes-apt-keyring.gpg
echo 'deb [signed-by=/etc/apt/keyrings/kubernetes-apt-keyring.gpg] https://pkgs.k8s.io/core:/stable:/v1.29/deb/ /' | sudo tee /etc/apt/sources.list.d/kubernetes.listsudo apt-get update -y
sudo apt-get install -y kubelet kubeadm kubectl 
sudo apt-mark hold kubelet kubeadm kubectl# kubelet 开机自启
systemctl enable --now kubelet# 配置 crictl socket
crictl config  runtime-endpoint unix:///run/containerd.sock
crictl config image-endpoint unix:///run/containerd/containerd.sock

chmod +x install.sh
./install.sh

初始化 master01

暴露环境变量

export K8S_VERSION=1.29.1   # k8s 集群版本
export POD_CIDR=10.244.0.0/16   # pod 网段
export SERVICE_CIDR=10.96.0.0/12   # service 网段
export APISERVER_MASTER01=192.168.254.130   # master01 ip
export APISERVER_HA=192.168.254.100    # 集群 vip 地址
export APISERVER_HA_PORT=16443    # 集群 vip 地址

在你的主节点初始化集群(同样在 workdir/ 下)

# 命令行方式初始化, 后面需要手动更改 kube-proxy 为 ipvs 模式
# kubeadm init --apiserver-advertise-address=$APISERVER_MASTER01 --apiserver-bind-port=6443 --image-repository registry.aliyuncs.com/google_containers --kubernetes-version v1.29.1 --service-cidr=$SERVICE_CIDR --pod-network-cidr=$POD_CIDR --upload-certs# kubeadm config print init-defaults >Kubernetes-cluster.yaml  # kubeadm 默认配置
cat << EOF > Kubernetes-cluster.yaml
apiVersion: kubeadm.k8s.io/v1beta3
bootstrapTokens:
- groups:- system:bootstrappers:kubeadm:default-node-tokentoken: abcdef.0123456789abcdefttl: 24h0m0susages:- signing- authentication
kind: InitConfiguration
localAPIEndpoint:# 将此处IP地址替换为主节点IP ETCD容器会试图通过此地址绑定端口 如果主机不存在则会失败advertiseAddress: $APISERVER_MASTER01bindPort: 6443
nodeRegistration:criSocket: unix:///run/containerd/containerd.sockimagePullPolicy: IfNotPresentname: $name  # 节点 hostnametaints: null
---
# controlPlaneEndpoint 可配置高可用的 ApiServer
apiServer:timeoutForControlPlane: 4m0scertSANs: # 主节点IP- $APISERVER_HA- $APISERVER_MASTER01
apiVersion: kubeadm.k8s.io/v1beta3
controlPlaneEndpoint: "$APISERVER_HA:$APISERVER_HA_PORT"
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
dns: {}
etcd:  # 可使用外接 etcd 集群local:dataDir: /var/lib/etcd
imageRepository: registry.aliyuncs.com/google_containers  # 国内源
kind: ClusterConfiguration
kubernetesVersion: $K8S_VERSION
networking:dnsDomain: cluster.local# 增加配置 指定pod网段podSubnet: $POD_CIDRserviceSubnet: $SERVICE_CIDR
scheduler: {}
---
apiVersion: kubeproxy.config.k8s.io/v1alpha1
kind: KubeProxyConfiguration
mode: ipvs  # kubeproxy 使用 ipvs
---
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
cgroupDriver: systemd
EOFkubeadm init --config Kubernetes-cluster.yaml --upload-certsmkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config# 安装 calico
sed -i 's#cidr.*#cidr: '$POD_CIDR'#' custom-resources.yaml
kubectl create -f tigera-operator.yaml
kubectl create -f custom-resources.yaml

–upload-certs: 将控制平面证书上传到 kubeadm-certs Secret。

简单来说: 后面就不需要把集群证书拷贝到其他 master 节点

配置自动补全

apt install bash-completion -y
cat << EOF >> ~/.profile
alias k='kubectl'
source <(kubectl completion bash)
complete -F __start_kubectl k
EOFsource ~/.profile

加入其余节点

master02:

kubeadm join 192.168.254.100:16443 --token abcdef.0123456789abcdef \--discovery-token-ca-cert-hash sha256:6c9f43be739919e1e03abaa3d0deae00bc2400f77dc7574e338dc6460be2eab6 \--control-plane --certificate-key 02feec260870e7145d69b65d0252f1067768c193d9e8c4aba31ed1b1fa7aaba8

node01:

kubeadm join 192.168.254.100:16443 --token abcdef.0123456789abcdef \--discovery-token-ca-cert-hash sha256:6c9f43be739919e1e03abaa3d0deae00bc2400f77dc7574e338dc6460be2eab6

验证集群

$ k get po -A
NAMESPACE         NAME                                       READY   STATUS              RESTARTS   AGE
calico-system     calico-kube-controllers-75f84bf8b4-96hht   0/1     ContainerCreating   0          6m19s
calico-system     calico-node-4cd7c                          0/1     PodInitializing     0          105s
calico-system     calico-node-7z22c                          0/1     PodInitializing     0          109s
calico-system     calico-node-pcq8m                          0/1     Running             0          6m19s
calico-system     calico-typha-65b78b8f8d-r2qjn              1/1     Running             0          100s
calico-system     calico-typha-65b78b8f8d-vv4ph              1/1     Running             0          6m19s
calico-system     csi-node-driver-bsd66                      0/2     ContainerCreating   0          105s
calico-system     csi-node-driver-h465x                      0/2     ContainerCreating   0          109s
calico-system     csi-node-driver-htqj2                      0/2     ContainerCreating   0          6m19s
kube-system       coredns-857d9ff4c9-nk4kx                   1/1     Running             0          6m40s
kube-system       coredns-857d9ff4c9-w6zff                   1/1     Running             0          6m40s
kube-system       etcd-master01                              1/1     Running             0          6m53s
kube-system       etcd-master02                              1/1     Running             0          97s
kube-system       kube-apiserver-master01                    1/1     Running             0          6m53s
kube-system       kube-apiserver-master02                    1/1     Running             0          98s
kube-system       kube-controller-manager-master01           1/1     Running             0          6m53s
kube-system       kube-controller-manager-master02           1/1     Running             0          97s
kube-system       kube-proxy-7mwpd                           1/1     Running             0          109s
kube-system       kube-proxy-gfcqb                           1/1     Running             0          6m40s
kube-system       kube-proxy-vkkm4                           1/1     Running             0          105s
kube-system       kube-scheduler-master01                    1/1     Running             0          6m53s
kube-system       kube-scheduler-master02                    1/1     Running             0          99s
tigera-operator   tigera-operator-55585899bf-xssq5           1/1     Running             0          6m40s

参考:

https://kubernetes.io/zh-cn/docs/setup/production-environment/tools/kubeadm/install-kubeadm/
https://ai-feier.github.io/p/keepalived-nginx%E5%AE%9E%E7%8E%B0%E9%AB%98%E5%8F%AF%E7%94%A8apiserver/
https://blog.csdn.net/m0_51964671/article/details/135256571