小型企业网设计-课设实验-爆款实验

可以按照我的配置依次配置，成品打包文件，请@：Ensp888

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]un in en
Info: Information center is disabled.
[Huawei]#
[Huawei]sysname SW5
[SW5]#
[SW5]vlan batch 1 to 6 100
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW5]#
[SW5]stp region-configuration
[SW5-mst-region] region-name huawei
[SW5-mst-region] instance 1 vlan 1 to 3 100
[SW5-mst-region] instance 2 vlan 4 to 6
[SW5-mst-region] active region-configuration
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW5-mst-region]#
[SW5-mst-region]interface Ethernet0/0/1
[SW5-Ethernet0/0/1] port link-type trunk
[SW5-Ethernet0/0/1] port trunk allow-pass vlan 1 to 6 100
[SW5-Ethernet0/0/1]#
[SW5-Ethernet0/0/1]interface Ethernet0/0/2
[SW5-Ethernet0/0/2] port link-type access
[SW5-Ethernet0/0/2]#
[SW5-Ethernet0/0/2]interface Ethernet0/0/3
[SW5-Ethernet0/0/3] port link-type access
[SW5-Ethernet0/0/3] port default vlan 2
[SW5-Ethernet0/0/3]#
[SW5-Ethernet0/0/3]interface Ethernet0/0/4
[SW5-Ethernet0/0/4] port link-type access
[SW5-Ethernet0/0/4] port default vlan 3
[SW5-Ethernet0/0/4]
[Huawei]sysname SW6
[SW6]#
[SW6]vlan batch 1 to 6 100
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW6]#
[SW6]stp region-configuration
[SW6-mst-region] region-name huawei
[SW6-mst-region] instance 1 vlan 1 2 3 100 
[SW6-mst-region] instance 2 vlan 4 5 6
[SW6-mst-region] active region-configuration
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW6-mst-region]#
[SW6-mst-region]interface Ethernet0/0/1
[SW6-Ethernet0/0/1] port link-type trunk
[SW6-Ethernet0/0/1] port trunk allow-pass vlan 1 to 6 100
[SW6-Ethernet0/0/1]#
[SW6-Ethernet0/0/1]interface Ethernet0/0/2
[SW6-Ethernet0/0/2] port link-type access
[SW6-Ethernet0/0/2] port default vlan 4
[SW6-Ethernet0/0/2]#
[SW6-Ethernet0/0/2]interface Ethernet0/0/3
[SW6-Ethernet0/0/3] port link-type access
[SW6-Ethernet0/0/3] port default vlan 5
[SW6-Ethernet0/0/3]#
[SW6-Ethernet0/0/3]interface Ethernet0/0/4
[SW6-Ethernet0/0/4] port link-type access
[SW6-Ethernet0/0/4] port default vlan 6
[SW6-Ethernet0/0/4]
[Huawei]sysname SW7
[SW7]#
[SW7]vlan batch 1 to 6 100
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW7]#
[SW7]stp region-configuration
[SW7-mst-region] region-name huawei
[SW7-mst-region] instance 1 vlan 1 2 3 100 
[SW7-mst-region] instance 2 vlan 4 5 6
[SW7-mst-region] active region-configuration
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW7-mst-region]#
[SW7-mst-region]interface Ethernet0/0/4
[SW7-Ethernet0/0/4] port link-type trunk
[SW7-Ethernet0/0/4] port trunk allow-pass vlan 1 to 6 100
[SW7-Ethernet0/0/4]#
[SW7-Ethernet0/0/4]interface Ethernet0/0/2
[SW7-Ethernet0/0/2] port link-type access
[SW7-Ethernet0/0/2] port default vlan 100
[SW7-Ethernet0/0/2]#
[SW7-Ethernet0/0/2]interface Ethernet0/0/3
[SW7-Ethernet0/0/3] port link-type access
[SW7-Ethernet0/0/3] port default vlan 100
[SW7-Ethernet0/0/3]#
[SW7-Ethernet0/0/3]interface Ethernet0/0/1
[SW7-Ethernet0/0/1] port link-type access
[SW7-Ethernet0/0/1] port default vlan 100
[SW7-Ethernet0/0/1]
[Huawei]#
[Huawei]sysname SW3
[SW3]#
[SW3]vlan batch 1 to 6 100
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW3]#
[SW3]stp region-configuration
[SW3-mst-region] region-name huawei
[SW3-mst-region] instance 1 vlan 1 2 3 100 
[SW3-mst-region] instance 2 vlan 4 5 6
[SW3-mst-region] active region-configuration
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW3-mst-region]#
[SW3-mst-region]interface g0/0/3
[SW3-GigabitEthernet0/0/3] port link-type trunk
[SW3-GigabitEthernet0/0/3] port trunk allow-pass vlan 1 to 6 100
[SW3-GigabitEthernet0/0/3]#
[SW3-GigabitEthernet0/0/3]interface g0/0/2
[SW3-GigabitEthernet0/0/2] port link-type trunk
[SW3-GigabitEthernet0/0/2] port trunk allow-pass vlan 1 to 6 100
[SW3-GigabitEthernet0/0/2]#
[SW3-GigabitEthernet0/0/2]interface g0/0/1
[SW3-GigabitEthernet0/0/1] port link-type trunk
[SW3-GigabitEthernet0/0/1] port trunk allow-pass vlan 1 to 6 100
[SW3-GigabitEthernet0/0/1]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]un in en
Info: Information center is disabled.
[Huawei]#
[Huawei]sysname SW4
[SW4]#
[SW4]vlan batch 1 to 6 100
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW4]#
[SW4]stp region-configuration
[SW4-mst-region] region-name huawei
[SW4-mst-region] instance 1 vlan 1 2 3 100 
[SW4-mst-region] instance 2 vlan 4 5 6
[SW4-mst-region] active region-configuration
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW4-mst-region]#
[SW4-mst-region]interface g0/0/3
[SW4-GigabitEthernet0/0/3] port link-type trunk
[SW4-GigabitEthernet0/0/3] port trunk allow-pass vlan 1 to 6 100
[SW4-GigabitEthernet0/0/3]#
[SW4-GigabitEthernet0/0/3]interface g0/0/2
[SW4-GigabitEthernet0/0/2] port link-type trunk
[SW4-GigabitEthernet0/0/2] port trunk allow-pass vlan 1 to 6 100
[SW4-GigabitEthernet0/0/2]#
[SW4-GigabitEthernet0/0/2]interface g0/0/1
[SW4-GigabitEthernet0/0/1] port link-type trunk
[SW4-GigabitEthernet0/0/1] port trunk allow-pass vlan 1 to 6 100
[SW4-GigabitEthernet0/0/1]
[Huawei]#
[Huawei]sysname SW1
[SW1]#
[SW1]vlan batch 1 to 6 100 200
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW1]#
[SW1]stp region-configuration
[SW1-mst-region] region-name huawei
[SW1-mst-region] instance 1 vlan 1 2 3 100 
[SW1-mst-region] instance 2 vlan 4 5 6
[SW1-mst-region] active region-configuration
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW1-mst-region]#
[SW1-mst-region]stp in 1 ro pr 
[SW1]stp in 2 ro se 
[SW1]#
[SW1]interface g0/0/4
[SW1-GigabitEthernet0/0/4] port link-type trunk
[SW1-GigabitEthernet0/0/4] port trunk allow-pass vlan 1 to 6 100
[SW1-GigabitEthernet0/0/4]#
[SW1-GigabitEthernet0/0/4]interface g0/0/5
[SW1-GigabitEthernet0/0/5] port link-type trunk
[SW1-GigabitEthernet0/0/5] port trunk allow-pass vlan 1 to 6 100
[SW1-GigabitEthernet0/0/5]#
[SW1-GigabitEthernet0/0/5]interface eth 1
[SW1-Eth-Trunk1] mo lacp
[SW1-Eth-Trunk1] trunkport g0/0/2
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW1-Eth-Trunk1] trunkport g0/0/3
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW1-Eth-Trunk1] port link-type trunk
[SW1-Eth-Trunk1] port trunk allow-pass vlan 1 to 6 100
[SW1-Eth-Trunk1]interface g0/0/1
[SW1-GigabitEthernet0/0/1] port link-type access
[SW1-GigabitEthernet0/0/1] port default vlan 200
[SW1-GigabitEthernet0/0/1]
[SW1-GigabitEthernet0/0/1]q
[SW1]interface Vlanif1
[SW1-Vlanif1] ip address 172.16.1.252 255.255.255.0 
[SW1-Vlanif1] vrrp vrid 1 virtual-ip 172.16.1.254
[SW1-Vlanif1] vrrp vrid 1 priority 120
[SW1-Vlanif1] vrrp vrid 1 tra inte g0/0/1 re 30
[SW1-Vlanif1] vrrp vrid 1 pr t d 20
[SW1-Vlanif1]#
[SW1-Vlanif1]interface Vlanif2
[SW1-Vlanif2] ip address 172.16.2.252 255.255.255.0 
[SW1-Vlanif2] vrrp vrid 2 virtual-ip 172.16.2.254
[SW1-Vlanif2] vrrp vrid 2 priority 120
[SW1-Vlanif2] vrrp vrid 2 tra inte g0/0/1 re 30
[SW1-Vlanif2] vrrp vrid 2 pr t d 20
[SW1-Vlanif2]#
[SW1-Vlanif2]interface Vlanif3
[SW1-Vlanif3] ip address 172.16.3.252 255.255.255.0 
[SW1-Vlanif3] vrrp vrid 3 virtual-ip 172.16.3.254
[SW1-Vlanif3] vrrp vrid 3 priority 120
[SW1-Vlanif3] vrrp vrid 3 tra inte g0/0/1 re 30
[SW1-Vlanif3] vrrp vrid 3 pr t d 20
[SW1-Vlanif3]#
[SW1-Vlanif3]interface Vlanif100
[SW1-Vlanif100] ip address 172.16.100.252 255.255.255.0 
[SW1-Vlanif100] vrrp vrid 100 virtual-ip 172.16.100.254
[SW1-Vlanif100] vrrp vrid 100 priority 120
[SW1-Vlanif100] vrrp vrid 100 tra inte g0/0/1 re 30
[SW1-Vlanif100] vrrp vrid 100 pr t d 20
[SW1-Vlanif100]inte vlan 200
[SW1-Vlanif200]ip ad 172.16.10.2 24
[SW1-Vlanif200]q
[SW1] ospf 1 rou 1.1.1.1             
[SW1-ospf-1] area 0.0.0.0                   
[SW1-ospf-1-area-0.0.0.0]  network 172.16.10.0 0.0.0.255 
[SW1-ospf-1-area-0.0.0.0] area 0.0.0.1                   
[SW1-ospf-1-area-0.0.0.1]  network 172.16.1.0 0.0.0.255  
[SW1-ospf-1-area-0.0.0.1]  network 172.16.2.0 0.0.0.255  
[SW1-ospf-1-area-0.0.0.1]  network 172.16.3.0 0.0.0.255  
[SW1-ospf-1-area-0.0.0.1]  network 172.16.4.0 0.0.0.255  
[SW1-ospf-1-area-0.0.0.1]  network 172.16.5.0 0.0.0.255  
[SW1-ospf-1-area-0.0.0.1]  network 172.16.6.0 0.0.0.255  
[SW1-ospf-1-area-0.0.0.1]  network 172.16.100.0 0.0.0.255
[SW1-ospf-1-area-0.0.0.1]新增dhcp
[SW1]dhcp en 
Info: The operation may take a few seconds. Please wait for a moment.done.
[SW1]ip po vlan1
Info:It's successful to create an IP address pool.
[SW1-ip-pool-vlan1]net 172.16.1.0 ma 24
[SW1-ip-pool-vlan1]ga 172.16.1.254
[SW1-ip-pool-vlan1]dns 172.16.100.249
[SW1-ip-pool-vlan1]
[SW1-ip-pool-vlan1]ip po vlan2
Info:It's successful to create an IP address pool.
[SW1-ip-pool-vlan2]net 172.16.2.0 ma 24
[SW1-ip-pool-vlan2]ga 172.16.2.254
[SW1-ip-pool-vlan2]dns 172.16.100.249
[SW1-ip-pool-vlan2]
[SW1-ip-pool-vlan2]ip po vlan3
Info:It's successful to create an IP address pool.
[SW1-ip-pool-vlan3]net 172.16.3.0 ma 24
[SW1-ip-pool-vlan3]ga 172.16.3.254
[SW1-ip-pool-vlan3]dns 172.16.100.249
[SW1-ip-pool-vlan3]
[SW1-ip-pool-vlan3]ip po vlan4
Info:It's successful to create an IP address pool.
[SW1-ip-pool-vlan4]net 172.16.4.0 ma 24
[SW1-ip-pool-vlan4]ga 172.16.4.254
[SW1-ip-pool-vlan4]dns 172.16.100.249
[SW1-ip-pool-vlan4]
[SW1-ip-pool-vlan4]ip po vlan5
Info:It's successful to create an IP address pool.
[SW1-ip-pool-vlan5]net 172.16.5.0 ma 24
[SW1-ip-pool-vlan5]ga 172.16.5.254
[SW1-ip-pool-vlan5]dns 172.16.100.249
[SW1-ip-pool-vlan5]
[SW1-ip-pool-vlan5]ip po vlan6
Info:It's successful to create an IP address pool.
[SW1-ip-pool-vlan6]net 172.16.6.0 ma 24
[SW1-ip-pool-vlan6]ga 172.16.6.254
[SW1-ip-pool-vlan6]dns 172.16.100.249
[SW1-ip-pool-vlan6]
[SW1-ip-pool-vlan6]inte vlan 1
[SW1-Vlanif1]dhcp se gl
[SW1-Vlanif1]inte vlan 2
[SW1-Vlanif2]dhcp se gl
[SW1-Vlanif2]inte vlan 3
[SW1-Vlanif3]dhcp se gl
[SW1-Vlanif3]inte vlan 4
[SW1-Vlanif4]dhcp se gl
[SW1-Vlanif4]inte vlan 5
[SW1-Vlanif5]dhcp se gl
[SW1-Vlanif5]inte vlan 6
[SW1-Vlanif6]dhcp se gl
[SW1-Vlanif6]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]un in en
Info: Information center is disabled.
[Huawei]#
[Huawei]sysname SW2
[SW2]#
[SW2]vlan batch 1 to 6 100 200
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW2]#
[SW2]stp region-configuration
[SW2-mst-region] region-name huawei
[SW2-mst-region] instance 1 vlan 1 2 3 100 
[SW2-mst-region] instance 2 vlan 4 5 6
[SW2-mst-region] active region-configuration
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW2-mst-region]#
[SW2-mst-region]stp in 2 ro pr 
[SW2]stp in 1 ro se 
[SW2]#
[SW2]interface g0/0/4
[SW2-GigabitEthernet0/0/4] port link-type trunk
[SW2-GigabitEthernet0/0/4] port trunk allow-pass vlan 1 to 6 100
[SW2-GigabitEthernet0/0/4]#
[SW2-GigabitEthernet0/0/4]interface g0/0/5
[SW2-GigabitEthernet0/0/5] port link-type trunk
[SW2-GigabitEthernet0/0/5] port trunk allow-pass vlan 1 to 6 100
[SW2-GigabitEthernet0/0/5]#
[SW2-GigabitEthernet0/0/5]interface eth 1
[SW2-Eth-Trunk1] mo lacp
[SW2-Eth-Trunk1] trunkport g0/0/2
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW2-Eth-Trunk1] trunkport g0/0/3
Info: This operation may take a few seconds. Please wait for a moment...done.
[SW2-Eth-Trunk1] port link-type trunk
[SW2-Eth-Trunk1] port trunk allow-pass vlan 1 to 6 100
[SW2-Eth-Trunk1]#
[SW2-Eth-Trunk1]interface g0/0/1
[SW2-GigabitEthernet0/0/1] port link-type access
[SW2-GigabitEthernet0/0/1] port default vlan 200
[SW2-GigabitEthernet0/0/1]
[SW2-GigabitEthernet0/0/1]q
[SW2]interface Vlanif1
[SW2-Vlanif1] ip address 172.16.1.253 255.255.255.0 
[SW2-Vlanif1] vrrp vrid 1 virtual-ip 172.16.1.254
[SW2-Vlanif1]#
[SW2-Vlanif1]interface Vlanif2
[SW2-Vlanif2] ip address 172.16.2.253 255.255.255.0 
[SW2-Vlanif2] vrrp vrid 2 virtual-ip 172.16.2.254
[SW2-Vlanif2]#
[SW2-Vlanif2]interface Vlanif3
[SW2-Vlanif3] ip address 172.16.3.253 255.255.255.0 
[SW2-Vlanif3] vrrp vrid 3 virtual-ip 172.16.3.254
[SW2-Vlanif3]#
[SW2-Vlanif3]interface Vlanif100
[SW2-Vlanif100] ip address 172.16.100.253 255.255.255.0 
[SW2-Vlanif100] vrrp vrid 100 virtual-ip 172.16.100.254
[SW2-Vlanif100]#
[SW2-Vlanif100]interface Vlanif4
[SW2-Vlanif4] ip address 172.16.4.253 255.255.255.0 
[SW2-Vlanif4] vrrp vrid 4 virtual-ip 172.16.4.254   
[SW2-Vlanif4] vrrp vrid 4 priority 120
[SW2-Vlanif4] vrrp vrid 4 tra inte g0/0/1 re 30
[SW2-Vlanif4] vrrp vrid 4 pr t d 20
[SW2-Vlanif4]#
[SW2-Vlanif4]interface Vlanif5
[SW2-Vlanif5] ip address 172.16.5.253 255.255.255.0 
[SW2-Vlanif5] vrrp vrid 5 virtual-ip 172.16.5.254
[SW2-Vlanif5] vrrp vrid 5 priority 120
[SW2-Vlanif5] vrrp vrid 5 tra inte g0/0/1 re 30
[SW2-Vlanif5] vrrp vrid 5 pr t d 20
[SW2-Vlanif5]#
[SW2-Vlanif5]interface Vlanif6
[SW2-Vlanif6] ip address 172.16.6.253 255.255.255.0 
[SW2-Vlanif6] vrrp vrid 6 virtual-ip 172.16.6.254
[SW2-Vlanif6] vrrp vrid 6 priority 120
[SW2-Vlanif6] vrrp vrid 6 tra inte g0/0/1 re 30
[SW2-Vlanif6] vrrp vrid 6 pr t d 20
[SW2-Vlanif6]inte vlan 200
[SW2-Vlanif200]ip ad 172.16.11.2 24
[SW2-Vlanif200]q
[SW2]
[SW2] ospf 1 rou 2.2.2.2             
[SW2-ospf-1] area 0.0.0.0                   
[SW2-ospf-1-area-0.0.0.0]  network 172.16.11.0 0.0.0.255 
[SW2-ospf-1-area-0.0.0.0] area 0.0.0.1                   
[SW2-ospf-1-area-0.0.0.1]  network 172.16.1.0 0.0.0.255  
[SW2-ospf-1-area-0.0.0.1]  network 172.16.2.0 0.0.0.255  
[SW2-ospf-1-area-0.0.0.1]  network 172.16.3.0 0.0.0.255  
[SW2-ospf-1-area-0.0.0.1]  network 172.16.4.0 0.0.0.255  
[SW2-ospf-1-area-0.0.0.1]  network 172.16.5.0 0.0.0.255  
[SW2-ospf-1-area-0.0.0.1]  network 172.16.6.0 0.0.0.255  
[SW2-ospf-1-area-0.0.0.1]  network 172.16.100.0 0.0.0.255
[SW2-ospf-1-area-0.0.0.1]
新增dhcp
[SW2]dhcp en 
Info: The operation may take a few seconds. Please wait for a moment.done.
[SW2]ip po vlan1
Info:It's successful to create an IP address pool.
[SW2-ip-pool-vlan1]net 172.16.1.0 ma 24
[SW2-ip-pool-vlan1]ga 172.16.1.254
[SW2-ip-pool-vlan1]dns 172.16.100.249
[SW2-ip-pool-vlan1]
[SW2-ip-pool-vlan1]ip po vlan2
Info:It's successful to create an IP address pool.
[SW2-ip-pool-vlan2]net 172.16.2.0 ma 24
[SW2-ip-pool-vlan2]ga 172.16.2.254
[SW2-ip-pool-vlan2]dns 172.16.100.249
[SW2-ip-pool-vlan2]
[SW2-ip-pool-vlan2]ip po vlan3
Info:It's successful to create an IP address pool.
[SW2-ip-pool-vlan3]net 172.16.3.0 ma 24
[SW2-ip-pool-vlan3]ga 172.16.3.254
[SW2-ip-pool-vlan3]dns 172.16.100.249
[SW2-ip-pool-vlan3]
[SW2-ip-pool-vlan3]ip po vlan4
Info:It's successful to create an IP address pool.
[SW2-ip-pool-vlan4]net 172.16.4.0 ma 24
[SW2-ip-pool-vlan4]ga 172.16.4.254
[SW2-ip-pool-vlan4]dns 172.16.100.249
[SW2-ip-pool-vlan4]
[SW2-ip-pool-vlan4]ip po vlan5
Info:It's successful to create an IP address pool.
[SW2-ip-pool-vlan5]net 172.16.5.0 ma 24
[SW2-ip-pool-vlan5]ga 172.16.5.254
[SW2-ip-pool-vlan5]dns 172.16.100.249
[SW2-ip-pool-vlan5]
[SW2-ip-pool-vlan5]ip po vlan6
Info:It's successful to create an IP address pool.
[SW2-ip-pool-vlan6]net 172.16.6.0 ma 24
[SW2-ip-pool-vlan6]ga 172.16.6.254
[SW2-ip-pool-vlan6]dns 172.16.100.249
[SW2-ip-pool-vlan6]
[SW2-ip-pool-vlan6]inte vlan 1
[SW2-Vlanif1]dhcp se gl
[SW2-Vlanif1]inte vlan 2
[SW2-Vlanif2]dhcp se gl
[SW2-Vlanif2]inte vlan 3
[SW2-Vlanif3]dhcp se gl
[SW2-Vlanif3]inte vlan 4
[SW2-Vlanif4]dhcp se gl
[SW2-Vlanif4]inte vlan 5
[SW2-Vlanif5]dhcp se gl
[SW2-Vlanif5]inte vlan 6
[SW2-Vlanif6]dhcp se gl
[SW2-Vlanif6]

<Huawei>sys                             
Enter system view, return user view with Ctrl+Z.
[Huawei]
[Huawei]un in en                        
Info: Information center is disabled.
[Huawei]
[Huawei]sys AR1                         
[AR1]
[AR1]inte g0/0/0                     
[AR1-GigabitEthernet0/0/0]
[AR1-GigabitEthernet0/0/0]ip ad 172.16.10.1 24            
[AR1-GigabitEthernet0/0/0]
[AR1-GigabitEthernet0/0/0]inte g0/0/1                     
[AR1-GigabitEthernet0/0/1]
[AR1-GigabitEthernet0/0/1]ip ad 172.16.11.1 24            
[AR1-GigabitEthernet0/0/1]
[AR1-GigabitEthernet0/0/1]acl 2000                        
[AR1-acl-basic-2000]
[AR1-acl-basic-2000]ru pe so 172.16.0.0 0.0.255.255 
[AR1-acl-basic-2000]
[AR1-acl-basic-2000]inte g0/0/2                     
[AR1-GigabitEthernet0/0/2]
[AR1-GigabitEthernet0/0/2]ip ad 200.1.1.1 24              
[AR1-GigabitEthernet0/0/2]
[AR1-GigabitEthernet0/0/2]nat ou 2000                     
[AR1-GigabitEthernet0/0/2]
[AR1-GigabitEthernet0/0/2]                                
[AR1-GigabitEthernet0/0/2]
[AR1-GigabitEthernet0/0/2]ip route-sta 0.0.0.0 0 200.1.1.2
[AR1]
[AR1]                                
[AR1]
[AR1] ospf 1 rou 3.3.3.3             
[AR1-ospf-1]
[AR1-ospf-1]default-route-adv               
[AR1-ospf-1]
[AR1-ospf-1] area 0.0.0.0                   
[AR1-ospf-1-area-0.0.0.0]
[AR1-ospf-1-area-0.0.0.0]  network 172.16.10.0 0.0.0.255 
[AR1-ospf-1-area-0.0.0.0]
[AR1-ospf-1-area-0.0.0.0]  network 172.16.11.0 0.0.0.255 
[AR1-ospf-1-area-0.0.0.0]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]
[Huawei]un in en 
Info: Information center is disabled.
[Huawei]
[Huawei]sys ISP
[ISP]
[ISP]inte g0/0/0
[ISP-GigabitEthernet0/0/0]
[ISP-GigabitEthernet0/0/0]ip ad 200.1.1.2 24
[ISP-GigabitEthernet0/0/0]
[ISP-GigabitEthernet0/0/0]inte g0/0/1
[ISP-GigabitEthernet0/0/1]
[ISP-GigabitEthernet0/0/1]ip ad 210.1.1.2 24
[ISP-GigabitEthernet0/0/1]

本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：http://www.mzph.cn/news/586376.shtml

如若内容造成侵权/违法违规/事实不符，请联系多彩编程网进行投诉反馈email:809451989@qq.com，一经查实，立即删除！

相关文章

2007-2022年上市公司华证ESG工具变量数据（原始数据+处理代码+结果）

2007-2022年上市公司华证ESG工具变量数据（原始数据+处理代码+结果）

2007-2022年上市公司华证ESG工具变量数据&#xff08;原始数据处理代码结果&#xff09; 1、时间&#xff1a;2007-2022年 2、范围&#xff1a;上市公司 3、指标&#xff1a;证券代码、id、证券简称、year、华证_ESG综合评级、华证_ESG赋值 、华证_ESG综合得分、华证_E评级、…
阅读更多...
Mysql 容易忘的 sql 指令总结

Mysql 容易忘的 sql 指令总结

目录 一、操作数据库的基本指令 二、查询语句的指令 1、基本查询语句 2、模糊查询 3、分支查询 4、 分组查询 5、分组查询 6、基本查询总结&#xff1a; 7、子查询 8、连接查询 三、MySQL中的常用函数 1、时间函数 2、字符串函数 3、聚合函数 4、运算函数 四、表…
阅读更多...
基于FPGA的数字电路（PWM脉宽调制）

基于FPGA的数字电路（PWM脉宽调制）

一.PWM的制作原理 假如我们有一个锯齿波&#xff0c;然后在锯齿波上设置一个阈值&#xff08;黑色水平虚线&#xff09;&#xff0c;凡是大于该阈值时输出均为高电平&#xff0c;反之则为低电平&#xff0c;这样我们是不是就得到一个PWM信号呢&#xff1f;如果我们想调整它的占…
阅读更多...
【Spring】spring的容器创建

【Spring】spring的容器创建

目录 控制反转IOC 依赖注入DI 创建spring的容器方式&#xff1a; 思考&#xff1a; spring整合Junit4 控制反转IOC 把对象的创建和对象之间的调用过程&#xff0c;交给Spring管理&#xff0c;IOC是容器&#xff0c;是思想。&#xff01;&#xff01;&#xff01; 依赖注入…
阅读更多...
算法导论复习（十三）最大流

算法导论复习（十三）最大流

前面一个写从哪里来的&#xff0c;第二个是还可以加多少流量&#xff0c;检查完的画下划线 找到一条增广链以后就对这条链上的数据进行处理 看看反向如何处理 还可以进行第三次检查 最后不能增加了就是最后的结果了
阅读更多...
Java关键字（1）

Java关键字（1）

Java中的关键字是指被编程语言保留用于特定用途的单词。这些关键字不能用作变量名或标识符。以下是Java中的一些关键字&#xff1a; public&#xff1a;表示公共的&#xff0c;可以被任何类访问。 private&#xff1a;表示私有的&#xff0c;只能被定义该关键字的类访问。 cl…
阅读更多...
超详细YOLOv8姿态检测全程概述：环境、训练、验证与预测详解

超详细YOLOv8姿态检测全程概述：环境、训练、验证与预测详解

目录 yolov8导航 YOLOv8&#xff08;附带各种任务详细说明链接&#xff09; 搭建环境说明 不同版本模型性能对比 不同版本对比 参数解释 模型解释 训练 训练示意代码 训练数据与.yaml配置方法 .yaml配置 数据集路径 标签数据说明 训练参数说明 训练过程示意及输出…
阅读更多...
系列六、Consul

系列六、Consul

一、Consul 1.1、概述 Consul是一套开源的分布式服务发现和配置管理系统&#xff0c;由HashiCorp公司用Go语言开发。他提供了微服务系统中的服务治理、配置中心、控制总线等功能。这些功能中的每一个功能都可以单独使用&#xff0c;也可以一起使用以构建全方位的服务网格&…
阅读更多...
【Web】vulhub-httpd apache解析漏洞复现(1)

【Web】vulhub-httpd apache解析漏洞复现(1)

目录 ①CVE-2017-15715 ②apache_parsing_vulnerability ①CVE-2017-15715 贴出源码&#xff1a; <?php if(isset($_FILES[file])) {$name basename($_POST[name]);$ext pathinfo($name,PATHINFO_EXTENSION);if(in_array($ext, [php, php3, php4, php5, phtml, pht]))…
阅读更多...
Oracle VirtualBox中Linux系统基本使用方法——备赛笔记——2024全国职业院校技能大赛“大数据应用开发”赛项

Oracle VirtualBox中Linux系统基本使用方法——备赛笔记——2024全国职业院校技能大赛“大数据应用开发”赛项

前言 小北的这篇博客介绍的是关于用VirtualBox中下载好的ubuntu系统中&#xff0c;为搭建Hadoop平台所做的命令操作准备&#xff0c;希望能帮助不会的人有指引作用。 没有安装好VirtualBox中的ubuntu系统以及创建Hadoop账户的请参考小北之前的三篇博客&#xff1a; ubuntu18…
阅读更多...
申请虚拟VISA卡Fomepay教程

申请虚拟VISA卡Fomepay教程

fomepay 用下面的注册链接直达 https://gpt.fomepay.com/#/pages/login/index?dS21BA1 或者扫描下面图片的二维码直达注册 注册后尽量随用随充值不建议放大量现金在里面。
阅读更多...
Java基础02-Java编程基础

Java基础02-Java编程基础

文章目录 变量&#xff08;Variables&#xff09;局部变量和成员变量局部变量&#xff08;Local Variables&#xff09;成员变量&#xff08;Instance Variables&#xff09; 标识符&#xff08;Identifiers&#xff09;八种基本数据类型原始数据类型&#xff08;Primitive Dat…
阅读更多...
uniapp中组件库的丰富NumberBox 步进器的用法

uniapp中组件库的丰富NumberBox 步进器的用法

目录 基本使用 #步长设置 #限制输入范围 #限制只能输入整数 #禁用 #固定小数位数 #异步变更 #自定义颜色和大小 #自定义 slot API #Props #Events #Slots 基本使用 通过v-model绑定value初始值&#xff0c;此值是双向绑定的&#xff0c;无需在回调中将返回的数值重…
阅读更多...
linux安装python

linux安装python

文章目录 前言一、下载安装包二、安装1.安装依赖2.解压3.安装4.软链接5.验证 总结 前言 本篇文章介绍linux环境下安装python。 一、下载安装包 下载地址&#xff1a;官方网站 我们以最新的标准版为例 二、安装 1.安装依赖 yum -y install openssl-devel ncurses-devel li…
阅读更多...
服务号和订阅号哪个好

服务号和订阅号哪个好

服务号和订阅号有什么区别&#xff1f;服务号转为订阅号有哪些作用&#xff1f;在推送频率上来看&#xff0c;服务号每月能推送四条消息&#xff0c;而订阅号可以每天&#xff08;24小时&#xff09;推送一条消息。如果企业开通公众号的目的是提供服务&#xff0c;例如售前资讯…
阅读更多...
动态规划 | 鸡蛋问题 | 元旦假期来点“蛋”题

动态规划 | 鸡蛋问题 | 元旦假期来点“蛋”题

文章目录 鸡蛋掉落 - 两枚鸡蛋题目描述动态规划解法问题分析程序代码 鸡蛋掉落题目描述问题分析程序代码复杂度分析 鸡蛋掉落 - 两枚鸡蛋 题目描述 原题链接 给你 2 枚相同 的鸡蛋&#xff0c;和一栋从第 1 层到第 n 层共有 n 层楼的建筑。 已知存在楼层 f &#xff0c;满足 …
阅读更多...
2022年全球运维大会（GOPS深圳站）-核心PPT资料下载

2022年全球运维大会（GOPS深圳站）-核心PPT资料下载

一、峰会简介 GOPS 主要面向运维行业的中高端技术人员&#xff0c;包括运维、开发、测试、架构师等群体。目的在于帮助IT技术从业者系统学习了解相关知识体系&#xff0c;让创新技术推动社会进步。您将会看到国内外知名企业的相关技术案例&#xff0c;也能与国内顶尖的技术专家…
阅读更多...
【数据结构】链式家族的成员——循环链表与静态链表

【数据结构】链式家族的成员——循环链表与静态链表

循环链表与静态链表 导言一、循环链表1.1 循环单链表1.2 循环双链表 二、静态链表2.1 静态链表的创建2.2 静态链表的初始化2.3 小结 结语 导言 大家好&#xff01;很高兴又和大家见面啦&#xff01;&#xff01;&#xff01; 经过前面的介绍&#xff0c;相信大家对链式家族的…
阅读更多...
软件测试/测试开发丨Mac Appium环境搭建

软件测试/测试开发丨Mac Appium环境搭建

Mac 上 Appium 环境搭建 安装 nodejs 与 npm 安装方式与 windows 类似 &#xff0c;官网下载对应的 mac 版本的安装包&#xff0c;双击即可安装&#xff0c;无须配置环境变量。官方下载地址&#xff1a;https://nodejs.org/en/download/ 安装 appium Appium 分为两个版本&a…
阅读更多...
【Transformer】深入理解Transformer模型1——初步认识了解

【Transformer】深入理解Transformer模型1——初步认识了解

前言 Transformer模型出自论文&#xff1a;《Attention is All You Need》 2017年 近年来&#xff0c;在自然语言处理领域和图像处理领域&#xff0c;Transformer模型都受到了极为广泛的关注&#xff0c;很多模型中都用到了Transformer或者是Transformer模型的变体&#xff0…
阅读更多...
推荐文章
最新文章

Copyright @ 2022~2023