DIFF:=EMA(CLOSE,12) - EMA(CLOSE,26);
DEA := EMA(DIFF,9);
MACD := 2*(DIFF-DEA);
xg:cross(diff,dea) and dea>-1.0 and dea<0.5 and CLOSE>ref(CLOSE,1) and CLOSE>=ma(c,60);
或：
DIF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIF,9);
XG:DIF>0 AND DEA>0 AND CROSS(DIF,DEA);
2、0轴上方二次金叉的选股公式：
JC:IF(SUM(IF(MACD>0 AND CROSS(MACD.DIF,MACD.DEA),1,0),0)-HHV(IF(IF(CROSS(MACD.DEA,0),1,0),
SUM(IF(MACD>0 AND CROSS(MACD.DIF,MACD.DEA),1,0),0),0),0)=2 AND SUM(IF(MACD>0 AND CROSS(MACD.DIF,MACD.DEA),1,0),
0)>REF(SUM(IF(MACD>0 AND CROSS(MACD.DIF,MACD.DEA),1,0),0),1),10,0);
3.0轴下方一次金叉的选股公式：
DIFF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD:=(DIFF-DEA)*2;
低位金叉:CROSS(DIFF,DEA) AND DIFF
4、0轴下方二次金叉且第二次金叉高于第一次金叉：
DIF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIF,9);
AA:=BARSLAST(REF(CROSS(DIF,DEA),1));
二次金叉:CROSS(DIF,DEA) AND DIF>REF(DIF,AA+1) AND AA<20 AND DIF<0;
5、0轴下方二次金叉选股公式：
DIFF:=EMA(CLOSE,12) - EMA(CLOSE,26); DEA:=EMA(DIFF,9);
MACD:=2*(DIFF-DEA);
A:=IF(CROSS(0,DEA),1,0);
A1:=IF(DIFF<0 AND CROSS(DIFF,DEA),1,0);
SS:=IF(A,SUM(A1,0),0);
SSB:=HHV(SS,0);
SSS:=SUM(A1,0);
JC:IF(SSS-SSB=2 AND SSS>REF(SSS,1),10,0);
6、缩量横盘突破选股：
WH01:=(HHV(C,10)-LLV(C,10))/LLV(C,10)*100<=10;
WH02:=SUM(VOL,10)/CAPITAL*100<45;
WH03:=REF(WH01,1);
WH04:=HHVBARS(HIGH,55)>20 OR C=HHV(H,55);
WH05:=WH02 AND WH03 AND WH04 AND C>REF(HHV(H,10),1);
WH05 AND REF(NOT(WH05),1);
7、均线、KDJ、MACD金叉的预警选股公式
完全符合以下条件：
1、5日线上穿10日线
2、MACD金叉
3、KDJ金叉(KDJ数值由9、3、3调整为8、2、2)
4、成交量指标金叉
通达信预警选股公式
A1:=CROSS(MA(C,5),MA(C,10));
A2:=CROSS(MACD.DIF,MACD.DEA);
A3:=CROSS(KDJ.K(8,2,2),KDJ.D(8,2,2));
A4:=CROSS(MA(V,5),MA(V,10));
XG:A1 AND A2 AND A3 AND 4;
三金叉选股完整源码，绝无未来函数
均线、成交量、MACD同时金叉
MA1:=MA(CLOSE,5);
MA2:=MA(CLOSE,10);
AA:=CROSS(MA1,MA2);
AAA:=COUNT(AA,3)>=1;
T1:=MA(VOL,5);
T2:=MA(VOL,10);
BB:=CROSS(T1,T2);
BBB:=COUNT(BB,3)>=1;
DIF:=EMA(CLOSE,12) - EMA(CLOSE,26);
DEA:=EMA(DIF,9);
MACD:=(DIF-DEA)*2;
CC:=CROSS(DIF,DEA);
CCC:=COUNT(CC,3)>=1;
三金:=AAA AND BBB AND CCC;
三金叉:FILTER(三金,3),COLORFF00FF;
使用说明：该选股公式适合超级短线，快进快出具有一定的风险因素，此时的股价往往处于拉高拔升阶段。
要求使用者特别关注股价所处的位置，如果过于高位防止庄家诱多。低位可大胆搏杀，短期回档被套也有回旋余地。
8、四线粘合
N1:=5;N2:=10;N3:=20;M:=1;
MA1:=MA(C,N1);MA2:=MA(C,N2);MA3:=MA(C,N3);
A3:=V>REF(V,1)*1.5 AND V>MA(V,5);
MAX(MA1,MAX(MA2,MA3))/MIN(MA1,MIN(MA2,MA3))<1+0.01*M
AND C>O AND V> REF(V,1) AND FINANCE(7)<=300000000
AND A3 AND CAPITAL<=300000000;
9、均线粘合
M:=1;
M5:=MA(CLOSE,5);
M10:=MA(CLOSE,10);
M20:=MA(CLOSE,20);
K1:=MAX(MAX(M5,M10),MAX(M10,M20));
K2:=MIN(MIN(M5,M10),MIN(M10,M20));
A:=MAX(M5,MAX(M10,M20))/MIN(M5,MIN(M10,M20))<1+0.01*M;
A1:=(K1/K2-1)<0.005;
A2:=(K1/K2-1)<0.005;
A3:=V>REF(V,1)*1.5 AND V>MA(V,5);
XG:A AND A1 AND A2 AND A3 ;
10、多线粘合
V0:=EMA(C,5);
V1:=EMA(C,10);
V2:=EMA(C,15);
V3:=EMA(C,30);
V4:=EMA(C,60);
M1:=1000*V1/V4<=1015 AND 1000*V1/V4>=975;
M2:=1000*V2/V4<=1020 AND 1000*V2/V4>=980;
M3:=1000*V3/V4<=1015 AND 1000*V3/V4>=985;
M4:=M1 AND M2 AND M3 AND CROSS(V0,V1);
M5:=M1 AND M2 AND M3 AND CROSS(V0,V3);
M4 OR M5;
