这是用光盘里的uImage的输出信息：
U-Boot# tftp 0x82000000 bakuImage
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.0.231; our IP address is 192.168.0.224
Filename 'bakuImage'.
Load address: 0x82000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################
795.9 KiB/s
done
Bytes transferred = 3163680 (304620 hex)
U-Boot# bootm
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Arago/3.2.0-psp04.06.00.08.sdk/a
Created: 2012-07-26 22:16:33 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3163616 Bytes = 3 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 3.2.0 (jenkins@sdit-build01) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #1 Thu Jul 26 17:16:27 CDT 2012
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: am335xevm
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at arch/arm/mach-omap2/clkt_clksel.c:194 omap2_clksel_recalc+0xd0/0x130()
[ 0.000000] clock: Could not find fieldval 0 for clock dpll_core_m6_ck parent dpll_core_x2_ck
[ 0.000000] Modules linked in:
[ 0.000000] Backtrace:
[ 0.000000] [] (dump_backtrace+0x0/0x110) from [] (dump_stack+0x18/0x1c)
[ 0.000000] r6:c0508f3c r5:000000c2 r4:c05dde80 r3:c05fe6c8
[ 0.000000] [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x5c/0x6c)
[ 0.000000] [] (warn_slowpath_common+0x0/0x6c) from [] (warn_slowpath_fmt+0x38/0x40)
[ 0.000000] r8:c0772440 r7:00000001 r6:00000002 r5:c05ef580 r4:00000000
[ 0.000000] r3:00000009
[ 0.000000] [] (warn_slowpath_fmt+0x0/0x40) from [] (omap2_clksel_recalc+0xd0/0x130)
[ 0.000000] r3:00000000 r2:c0509114
[ 0.000000] [] (omap2_clksel_recalc+0x0/0x130) from [] (propagate_rate+0x34/0x54)
[ 0.000000] r7:c05e256c r6:c05e256c r5:c05ef480 r4:c05ef580
[ 0.000000] [] (propagate_rate+0x0/0x54) from [] (propagate_rate+0x40/0x54)
之后省略很多输出信息
