latex 中一个页面有很多图片，超出一页就显示不出来了：请问怎么让后续图片显示在一个新页面中？
图片显示代码如下每行显示三张：
\begin{figure}
\centering
\includegraphics[width=1.8 in]{images/Fig5_Sample11a.jpg}\quad
\includegraphics[width=1.8 in]{images/Fig5_Sample11b.jpg}\quad
\includegraphics[width=1.8 in]{images/Fig5_Sample11c.jpg}\\
(a)\qquad\qquad\qquad\qquad\qquad\qquad(b)\qquad\qquad\qquad(c)\\
\includegraphics[width=1.8 in]{images/Fig5_Sample12a.jpg}\quad
\includegraphics[width=1.8 in]{images/Fig5_Sample12b.jpg}\quad
\includegraphics[width=1.8 in]{images/Fig5_Sample12c.jpg}\\
(a)\qquad\qquad\qquad\qquad\qquad\qquad(b)\qquad\qquad\qquad(c)\\
\includegraphics[width=1.8 in]{images/Fig5_Sample21a.jpg}\quad
\includegraphics[width=1.8 in]{images/Fig5_Sample21b.jpg}\quad
\includegraphics[width=1.8 in]{images/Fig5_Sample21c.jpg}\\
(a)\qquad\qquad\qquad\qquad\qquad\qquad(b)\qquad\qquad\qquad(c)\\
\includegraphics[width=1.8 in]{images/Fig5_Sample31a.jpg}\quad
\includegraphics[width=1.8 in]{images/Fig5_Sample31b.jpg}\quad
\includegraphics[width=1.8 in]{images/Fig5_Sample31c.jpg}\\
(a)\qquad\qquad\qquad\qquad\qquad\qquad(b)\qquad\qquad\qquad(c)\\
\includegraphics[width=1.8 in]{images/Fig5_Sample42a.jpg}\quad
\includegraphics[width=1.8 in]{images/Fig5_Sample42b.jpg}\quad
\includegraphics[width=1.8 in]{images/Fig5_Sample42c.jpg}\\
(a)\qquad\qquad\qquad\qquad\qquad\qquad(b)\qquad\qquad\qquad(c)\\
\includegraphics[width=1.8 in]{images/Fig5_Sample51a.jpg}\quad
\includegraphics[width=1.8 in]{images/Fig5_Sample51b.jpg}\quad
\includegraphics[width=1.8 in]{images/Fig5_Sample51c.jpg}\\
(a)\qquad\qquad\qquad\qquad\qquad\qquad(b)\qquad\qquad\qquad(c)\\
\includegraphics[width=1.8 in]{images/Fig5_Sample61a.jpg}\quad
\includegraphics[width=1.8 in]{images/Fig5_Sample61b.jpg}\quad
\includegraphics[width=1.8 in]{images/Fig5_Sample61c.jpg}\\
(a)\qquad\qquad\qquad\qquad\qquad\qquad(b)\qquad\qquad\qquad(c)\\
\includegraphics[width=1.8 in]{images/Fig5_Sample71a.jpg}\quad
\includegraphics[width=1.8 in]{images/Fig5_Sample71b.jpg}\quad
\includegraphics[width=1.8 in]{images/Fig5_Sample71c.jpg}\\
(a)\qquad\qquad\qquad\qquad\qquad\qquad(b)\qquad\qquad\qquad(c)\\
\caption{ Filtering results. (a) The DSMs before filtering. (b) The referenced terrain provided by ISPRS. (c) Our method results. All of these shaded relief maps are derived by using Kriging interpolation in Surfer software. The grid size is 0.5 m. The searching radii for Samples 11, 12, 21, 31, 42, 51, 61 and 71 are 166 m, 167 m, 84.5 m, 119 m, 152 m, 244 m, 336 m and 226 m, respectively.}
\end{figure}
)
