封装火灾报警线程实现智能家居中的火灾报警功能
mainPro.c（主函数）

#include <stdio.h>
#include "controlDevice.h"
#include "inputCommand.h"#include <pthread.h>struct Devices        *pdeviceHead  = NULL;         //设备工厂链表头struct Devices* findDeviceByName(struct Devices *phead,char *name)          //在设备链表中查找设备（语音和socket均可使用）
{struct Devices *tmp = phead;if(tmp == NULL){printf("The devicesLink is NULL");return NULL;}else{while(tmp != NULL){if(strcmp(tmp->deviceName,name) == 0){return tmp;}tmp = tmp->next;}return NULL;   }}void* fire_pthread(void *data)					//火灾报警线程处理函数
{struct Devices *fire;struct Devices *beep;int status;fire = findDeviceByName(pdeviceHead,"fire");        //从设备链表找出火灾检测和蜂鸣器beep = findDeviceByName(pdeviceHead,"beep");fire->deviceInit(fire->pinNum);                     beep->deviceInit(beep->pinNum);while(1){                                           //检测到火灾通过蜂鸣器报警status = fire->readStatus(fire->pinNum);if(status == 0){beep->open(beep->pinNum);printf("fire warning\n");delay(20000);}elsebeep->close(beep->pinNum);} int main()
{pthread_t fire_pth;if(wiringPiSetup()<0){//初始化wiringPi外设库printf("wiringPi Init failed\n");return -1;}//1.指令工厂初始化//2.设备控制工厂初始化pdeviceHead = addFireToDeviceLink(pdeviceHead);                 //将火灾检测加入设备链表pdeviceHead = addBeepToDeviceLink(pdeviceHead);                 //将蜂鸣器加入设备链表//3.线程池建立//3.3火灾线程ret = pthread_create(&fire_pth,NULL,fire_pthread,NULL);if (ret != 0) {printf("Failed to create firethread.\n");return -1;}//等待线程退出pthread_join(fire_pth,NULL);return 0;
}