1、下载gSOAP在gSOAP官网中可以找到最新的gSOAP安装包以及相关的文档gSOAP官网：http://www.cs.fsu.edu/~engelen/soap.htmlgSOAP下载地址：http://sourceforge.net/projects/gsoap2/files/
2、安装gSOAPa、解压zip压缩包命令：unzip gsoap_2.7.17.zipb、进入解压后生成的文件夹gsoap-2.7命令：cd gsoap-2.7/c、切换到root用户命令：su输入密码d、配置编译环境在gsoap-2.7/文件夹下有一个configure文件，执行它，自动配置编译环境命令：./configuree、编译连接命令：makef、安装gSOAP命令：make install可用wsdl2h或者soapcpp2查看gSOAP是否已经安装成功用命令whereis gsoap查看gSOAP安装到的位置
3、编写calc.h文件a、新建一个文件夹calc命令：mkdir calcb、进入calc命令：cd calcc、创建文件calc.h,在文件中写入以下内容，保存//gsoap ns service name: calc Simple calculator service//gsoap ns service style: rpc//gsoap ns service encoding: encoded//gsoap ns service namespace: http://localhost/calc.wsdl//gsoap ns service location: http://localhost/server.cgi//gsoap ns schema namespace: urn:calcint ns__add(double a, double b, double *result);int ns__sub(double a, double b, double *result);int ns__mul(double a, double b, double *result);int ns__div(double a, double b, double *result);int ns__pow(double a, double b, double *result);注意：a、以上的几行注释中，gsoap ns service不能删除，但可以修改b、ns__add等的ns后面是两个下划线
4、调用soapcpp2自动生成相关的文件(为了方便代码管理，在calc文件夹下新建一个soap)当前工作目录为calc/soap命令：soapcpp2 -i ../calc.h注意：可能会报错，一般是不知道gsoap相关include文件的位置，可以使用命令soapcpp2 -i ../calc.h -I /usr/include/gsoap
5、编写服务器端代码：server.cpp当前工作目录：calc#include "soap/soapcalcService.h"

	#include "soap/calc.nsmap"   //这个头文件不加的话，在链接的时候，stdsoap2.cpp里面会报无法引用namespaces#include <iostream>using namespace std;int main(int argc, char **argv) {calcService calc;int port = 65531;if (calc.run(port)) {cerr << "Calc service run failed" << endl;exit(0);}return 0;}int calcService::add(double a, double b, double* result) {*result = a + b;return SOAP_OK;}int calcService::sub(double a, double b, double* result) {*result = a - b;return SOAP_OK;}int calcService::mul(double a, double b, double* result) {*result = a * b;return SOAP_OK;}int calcService::div(double a, double b, double* result) {if (b) {*result = a / b;} else {return SOAP_FAULT;}return SOAP_OK;}int calcService::pow(double a, double b, double *result) {*result = ::pow(a, b);if (soap_errno == EDOM) {char *s = (char*) soap_malloc(this, 1024);sprintf(s, "Can't take the power of %f to %f", a, b);sprintf(s,"<error xmlns=\"http://tempuri.org/\">Can't take power of %f to %f</error>",a, b);return SOAP_FAULT;}return SOAP_OK;}6、编写客户端代码：client.cpp#include "soap/soapcalcProxy.h"#include "soap/calc.nsmap"#include <iostream>using namespace std;int main(int argc, char **argv) {double a = 4;double b = 2;double result;calcProxy calc;calc.soap_endpoint = "http://localhost:65531";calc.add(a,b,&result);cout<<a<<"+"<<b<<"="<<result<<endl;calc.sub(a,b,&result);cout<<a<<"-"<<b<<"="<<result<<endl;calc.mul(a,b,&result);cout<<a<<"*"<<b<<"="<<result<<endl;calc.div(a,b,&result);cout<<a<<"/"<<b<<"="<<result<<endl;calc.pow(a,b,&result);cout<<a<<"^"<<b<<"="<<result<<endl;return 0;}7、编写Makefile文件:makefile、sources.mk、subdir.mk、soap/subdir.mk、objects.mk新建bin文件夹当前工作目录：calc/bin#文件：makefileRM := rm -rf# 引入相关的生成文件-include sources.mk-include subdir.mk-include soap/subdir.mk-include objects.mkifneq ($(MAKECMDGOALS),clean)ifneq ($(strip $(C++_DEPS)),)-include $(C++_DEPS)endififneq ($(strip $(C_DEPS)),)-include $(C_DEPS)endififneq ($(strip $(CC_DEPS)),)-include $(CC_DEPS)endififneq ($(strip $(SERVER_CPP_DEPS)),)-include $(SERVER_CPP_DEPS)endififneq ($(strip $(CLIENT_CPP_DEPS)),)-include $(CLIENT_CPP_DEPS)endififneq ($(strip $(CXX_DEPS)),)-include $(CXX_DEPS)endififneq ($(strip $(C_UPPER_DEPS)),)-include $(C_UPPER_DEPS)endifendif# 生成目标all: server client# 相关工具server: $(SERVER_OBJS) $(USER_OBJS)@echo '创建目标: $@'g++  -o"server" $(SERVER_OBJS) $(USER_OBJS) $(LIBS)@echo '完成创建目标: $@'@echo "\n"client: $(CLIENT_OBJS) $(USER_OBJS)@echo '创建目标: $@'g++  -o"client" $(CLIENT_OBJS) $(USER_OBJS) $(LIBS)@echo '完成创建目标: $@'@echo "\n"# 清空临时文件clean:-$(RM) $(SERVER_OBJS)$(CLIENT_OBJS)$(C++_DEPS)$(C_DEPS)$(CC_DEPS)$(SERVER_CPP_DEPS)$(CLIENT_CPP_DEPS)$(EXECUTABLES)$(CXX_DEPS)$(C_UPPER_DEPS)-@echo "\n"cleanall:-$(RM) $(SERVER_OBJS)$(CLIENT_OBJS)$(C++_DEPS)$(C_DEPS)$(CC_DEPS)$(SERVER_CPP_DEPS)$(CLIENT_CPP_DEPS)$(EXECUTABLES)$(CXX_DEPS)$(C_UPPER_DEPS) server client-@echo "\n"cleanexe:-$(RM) server client-@echo "\n".PHONY: all clean dependents cleanall cleanexe
=====================================================================================================#文件：sources.mkO_SRCS := SERVER_CPP_SRCS := CLIENT_CPP_SRCS :=C_UPPER_SRCS := C_SRCS := S_UPPER_SRCS := OBJ_SRCS := ASM_SRCS := CXX_SRCS := C++_SRCS := CC_SRCS := SERVER_OBJS := CLIENT_OBJS :=C++_DEPS := C_DEPS := CC_DEPS := SERVER_CPP_DEPS := CLIENT_CPP_SRCS :=EXECUTABLES := CXX_DEPS := C_UPPER_DEPS := # 子目录SUBDIRS := \soap \. \
=====================================================================================================#文件：sources.mkO_SRCS := SERVER_CPP_SRCS := CLIENT_CPP_SRCS :=C_UPPER_SRCS := C_SRCS := S_UPPER_SRCS := OBJ_SRCS := ASM_SRCS := CXX_SRCS := C++_SRCS := CC_SRCS := SERVER_OBJS := CLIENT_OBJS :=C++_DEPS := C_DEPS := CC_DEPS := SERVER_CPP_DEPS := CLIENT_CPP_SRCS :=EXECUTABLES := CXX_DEPS := C_UPPER_DEPS := # 子目录SUBDIRS := \soap \. \=====================================================================================================#文件：subdir.mk# 生成的相关参数SERVER_CPP_SRCS += \../server.cppSERVER_OBJS += \./server.o SERVER_CPP_DEPS += \./server.d CLIENT_CPP_SRCS += \../client.cppCLIENT_OBJS += \./client.o CLIENT_CPP_DEPS += \./client.d # 根据.cpp文件生成.o文件%.o: ../%.cpp@echo '创建目标: $<'g++ -O0 -g3 -Wall -c -fmessage-length=0 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@:%.o=%.d)" -o"$@" "$<"@echo '完成创建目标: $<'@echo "\n"
=====================================================================================================#文件：soap/subdir.mk# 生成的相关参数SERVER_CPP_SRCS += \../soap/soapC.cpp \../soap/soapcalcService.cpp \/usr/include/gsoap/stdsoap2.cppSERVER_OBJS += \./soap/soapC.o \./soap/soapcalcService.o \./soap/stdsoap2.oSERVER_CPP_DEPS += \./soap/soapC.d \./soap/soapcalcService.d \./soap/stdsoap2.d CLIENT_CPP_SRCS += \../soap/soapC.cpp \../soap/soapcalcProxy.cpp \/usr/include/gsoap/stdsoap2.cppCLIENT_OBJS += \./soap/soapC.o \./soap/soapcalcProxy.o \./soap/stdsoap2.oCLIENT_CPP_DEPS += \./soap/soapC.d \./soap/soapcalcProxy.d \./soap/stdsoap2.d # 根据.cpp文件生成.o文件soap/%.o: ../soap/%.cpp@echo '创建目标: $<'g++ -O0 -g3 -Wall -c -fmessage-length=0 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@:%.o=%.d)" -o"$@" "$<"@echo '完成创建目标: $<'@echo "\n"soap/%.o:/usr/include/gsoap/%.cpp@echo '创建目标: $<'g++ -O0 -g3 -Wall -c -fmessage-length=0 -MMD -MP -MF"$(@:%.o=%.d)" -MT"$(@:%.o=%.d)" -o"$@" "$<"@echo '完成创建目标: $<'@echo "\n"
=====================================================================================================#文件：objects.mkUSER_OBJS :=LIBS :=
8、编译当前工作目录：calc/binmake
9、开启服务端./server
10、开启客户端./client
11、文件总览(3个目录, 42个文件)calc						// 根目录|-- bin						// 文件夹,存放makefile,以及生成的.o、.d、可执行文件|   |-- client|   |-- client.d|   |-- client.o|   |-- makefile|   |-- objects.mk|   |-- server|   |-- server.d|   |-- server.o|   |-- soap|   |   |-- soapcalcProxy.d|   |   |-- soapcalcProxy.o|   |   |-- soapcalcService.d|   |   |-- soapcalcService.o|   |   |-- soapC.d|   |   |-- soapC.o|   |   |-- stdsoap2.d|   |   |-- stdsoap2.o|   |   `-- subdir.mk|   |-- sources.mk|   `-- subdir.mk|-- calc.h					// calc.h|-- client.cpp				// 客户端|-- server.cpp				// 服务器端`-- soap					// 该文件夹存放命令soapcpp2 -i ../calc.h生成的文件|-- calc.add.req.xml|-- calc.add.res.xml|-- calc.div.req.xml|-- calc.div.res.xml|-- calc.mul.req.xml|-- calc.mul.res.xml|-- calc.nsmap|-- calc.pow.req.xml|-- calc.pow.res.xml|-- calc.sub.req.xml|-- calc.sub.res.xml|-- calc.wsdl|-- ns.xsd|-- soapcalcProxy.cpp|-- soapcalcProxy.h|-- soapcalcService.cpp|-- soapcalcService.h|-- soapC.cpp|-- soapH.h`-- soapStub.h