CRTMPServer 在CentOS 64-bit下的编译
http://blog.csdn.net/qiuchangyong/article/details/52848942
==========================================
一、Centos 用 wget 下载需要的软件
wget http://www.cmake.org/files/v2.8/cmake-2.8.6.tar.gz
二、安装 cmake
tar zxvf cmake-2.8.4.tar.gz
cd cmake-2.8.6
./bootstrap
gmake
gmake install
这样cmake就安装好了
三、编译crtmpserver
Here are the steps necessary for getting the server up and running. For installing the dependencies please consultthis.
- check out the source code from svn repository:
$ svn co --username anonymous https://svn.rtmpd.com/crtmpserver/trunk crtmpserver
Hit Enter key when prompted for password (this parameter is empty)
我发现这个目前不能用了，所以通过之前下载好的源码压缩包来编译的。
- go to the builders directory
$ cd crtmpserver/builders/cmake
- make sure everything is clean by doing
$ sh cleanup.sh
Note: This is necessary when updating the sources or you run into troubles like missing libraries reported by cmake
- generate the makefile using cmake
$ cmake .
Notice the “space dot”
- start the actual building process
$ make
At this point, if no errors occurred, you should have a working binary.
实际在编译时，遇到的问题是：
这是依赖的lua库编译的问题，重新编译lua库，给src/Makefile的CFLAGS变量加上-fPIC再重新编译即可。
四、运行服务器
If you are here from previous steps (compiling), you should already be in the right directory which isbuilders/cmake relative to the directory where the sources are located. Enter the following command:
$ ./crtmpserver/crtmpserver ./crtmpserver/crtmpserver.lua
五、发布
将cmake目录拷贝到发布的设备的/usr/local/bin/rtmpd下，同时将所有的*.so文件拷贝到cmake下，即可运行
六、后台运行
在后台运行：$ ./crtmpserver/crtmpserver ./crtmpserver/crtmpserver.lua &
查询后台运行所有进程：$ ps -al
查询后台运行进程： ps -ef | grep crtmpserver
用kill -9 (你的进程号)就可以关掉了
本文参考http://blog.sina.com.cn/s/blog_8337d0c50100v61j.html整理而得。
