在 LCD 驱动的时候发现，linux logo一直弄不出来，猜想可能是因为uImage的问题，就看了一眼 uImage 时间：

​

  我现在的时间是

，那可能就是没有更新make的时候没有更新，就上网搜了一下用下面的命令输出 uImage：make uImage，

CALL
scripts/checksyscalls.sh
CALLscripts/atonic/check-atomics.shCHKinclude/generated/ compile.h
Kernel: arch/arm/boot/ Image is readyKernel: arch/arm/boot/zImage is readymultiple (or no) load addresses:
This is incompatible with uImages
Specify LOADADDR on the commandline to build an uImage
arch/arm/boot/Makefile:90: recipe for target 'arch/arn/boot/uInage’ failedmake[1]:***[arch/arm/boot/uImage] Error 1
arch/aro/Makefile:342: recipe for target 'uInage' failed make:***「uInage] Error 2

  

​

  这其实说的没有指定加载地址，指定加载地址即可。

  执行这条指令就成功了（千万注意加载地址是否正确）：make ARCH=arm LOADADDR=0xc2000000 uImage