Linux中的磁盘挂载与取消

前言
磁盘挂载
- 查看分区信息
- 分区设置
- 格式化
- 磁盘挂载
- 持久化挂载点配置
取消磁盘挂载
- 查看已挂载的磁盘
- 取消挂载

前言

今天准备给一台PVE设备添加一块磁盘，踩了点小坑：磁盘挂载后重启后发现磁盘没有被挂载，于是整理记录一番。

磁盘挂载

查看分区信息

运行fdisk -l命令来查看系统中可用的磁盘分区信息

root@pve:/mnt# fdisk -l
Disk /dev/sda: 59.63 GiB, 64023257088 bytes, 125045424 sectors
Disk model: SanDisk SSD P4 6
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 4CF9B57E-4721-4752-8C97-292DD2E20AC9Device       Start       End   Sectors  Size Type
/dev/sda1       34      2047      2014 1007K BIOS boot
/dev/sda2     2048   1050623   1048576  512M EFI System
/dev/sda3  1050624 125045390 123994767 59.1G Linux LVMDisk /dev/mapper/pve-swap: 4 GiB, 4294967296 bytes, 8388608 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytesDisk /dev/mapper/pve-root: 55.12 GiB, 59185823744 bytes, 115597312 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytesDisk /dev/sdc: 111.79 GiB, 120034123776 bytes, 234441648 sectors
Disk model:  Z700 120GB     
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0xc5957d6aDevice     Boot Start       End   Sectors   Size Id Type
/dev/sdc1  *     2048 234440703 234438656 111.8G  7 HPFS/NTFS/exFAT
root@pve:/mnt#

信息说明：

这里有2个磁盘：sda磁盘有3个分区，sdc磁盘有一个分区

/dev/sda: /dev/sda1/dev/sda2/dev/sda3/dev/sdc:/dev/sdc1

分区设置

sdc磁盘设备是使用USB连接，使用fdisk /dev/sdc命令进行分区设置

执行命令后进入分区界面，按照提示操作：

输入m：查看帮助信息输入n：创建一个新分区输入p：显示磁盘分区表的信息，包括分区号、起始扇区、大小等输入w：写入保存分区设置

具体执行信息如下：

root@pve:/mnt# fdisk /dev/sdcWelcome to fdisk (util-linux 2.36.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.Command (m for help): mHelp:DOS (MBR)a   toggle a bootable flagb   edit nested BSD disklabelc   toggle the dos compatibility flagGenericd   delete a partitionF   list free unpartitioned spacel   list known partition typesn   add a new partitionp   print the partition tablet   change a partition typev   verify the partition tablei   print information about a partitionMiscm   print this menuu   change display/entry unitsx   extra functionality (experts only)ScriptI   load disk layout from sfdisk script fileO   dump disk layout to sfdisk script fileSave & Exitw   write table to disk and exitq   quit without saving changesCreate a new labelg   create a new empty GPT partition tableG   create a new empty SGI (IRIX) partition tableo   create a new empty DOS partition tables   create a new empty Sun partition tableCommand (m for help): n
All space for primary partitions is in use.Command (m for help): p
Disk /dev/sdc: 111.79 GiB, 120034123776 bytes, 234441648 sectors
Disk model:  Z700 120GB     
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0xc5957d6aDevice     Boot Start       End   Sectors   Size Id Type
/dev/sdc1  *     2048 234440703 234438656 111.8G  7 HPFS/NTFS/exFATCommand (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.

格式化

将磁盘格式化为ext4格式

mkfs -t ext4 /dev/sdc1

磁盘挂载

创建/mnt/sdc1目录

mkdir -p /mnt/sdc1

将/mnt/sdc1分区挂载在 /mnt/sdc1上

mount -t ext4 /dev/sdc1 /mnt/sdc1

持久化挂载点配置

在磁盘挂载后重启后发现磁盘没有被挂载，是由于挂载点配置不正确或者没有进行持久化设置导致。

将/mnt/sdc1挂载写入到系统启动项

echo /dev/sdc1 /mnt/sdc1 ext4 defaults 1 2 >> /etc/fstab

检查/etc/fstab配置文件：

/etc/fstab文件用于存储系统启动时要挂载的磁盘信息和挂载点设置

root@pve:/mnt# vi /etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/pve/root / ext4 errors=remount-ro 0 1
UUID=D11C-D304 /boot/efi vfat defaults 0 1
/dev/pve/swap none swap sw 0 0
proc /proc proc defaults 0 0
/dev/sdc1 /mnt/sdc1 ext4 defaults 0 1

取消磁盘挂载

要取消挂载磁盘，可以使用umount命令。

查看已挂载的磁盘

使用以下命令查看当前已挂载的磁盘和对应的挂载点：

root@pve:/mnt# mount
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1694612k,nr_inodes=423653,mode=755,inode64)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,nodev,noexec,relatime,size=345664k,mode=755,inode64)
/dev/sda2 on /boot/efi type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdc1 on /mnt/sdc1 type ext4 (rw,relatime)