【LuatOS】简单案例网页点灯

材料

硬件：合宙ESP32C3简约版，BH1750光照度模块，0.96寸OLED(4P_IIC)，杜邦线若干

接线：

ESP32C3.GND — OLED.GND — BH1750.GND

ESP32C3.3.3V — OLED.VCC — BH1750.VCC

ESP32C3.GPIO5 — OLED.SCL — BH1750.SCL

ESP32C3.GPIO4 — OLED.SDA — BH1750.SDA

LED灯是调用板载的gpio12/gpio13

功能

连接上ESP32C3开启的AP站点，能通过网页交互数据控制LED
采集BH1750的光强度数据，给单片机做判断
OLED上显示采集到的光强度数据，和当前LED灯的控制模式(自动或手动)
灯光的控制模式分成两种

自动模式：根据光强度数据来自动调整灯光亮度

手动模式：通过网页端控制灯光亮度

程序

main.lua

-- LuaTools需要PROJECT和VERSION这两个信息
PROJECT = "Demo"
VERSION = "1.0.0"-- 引入必要的库文件(lua编写), 内部库不需要require
sys = require("sys")
-- sys库的强力补充,增加任务通知之类的
sysplus = require("sysplus")
local bh1750 = require "bh1750"-- 全局变量
_G.BH1750_DATA = 0
_G.LedPwm_Data = 0
_G.LedMode = 0-- 初始化LED灯, 开发板上左右2个led分别是gpio12/gpio13
local LED_PWM = gpio.setup(12, 0, gpio.PULLUP)
local LED_RUN = gpio.setup(13, 0, gpio.PULLUP)-- 任务0--运行闪烁LED
function Task0_RunLed()log.info("Task0_RunLed_OK")while true doLED_RUN(0)sys.wait(500)LED_RUN(1)sys.wait(500)end
end-- 任务1--OLED显示
function Task1_OLED()log.info("Task1_OLED_Init")-- 初始化硬件i2c的ssd1306u8g2.begin({ic = "ssd1306",direction = 0,mode="i2c_hw",i2c_id = 0,i2c_speed = i2c.FAST}) u8g2.SetFontMode(1)u8g2.ClearBuffer()u8g2.SetFont(u8g2.font_opposansm10)log.info("Task1_OLED_OK")u8g2.SendBuffer()while true dou8g2.ClearBuffer()u8g2.DrawUTF8("RealTime", 30, 14)-- 显示光感u8g2.DrawUTF8("SunData: " .. string.format("%.2f", _G.BH1750_DATA), 0, 32)-- 控制模式u8g2.DrawUTF8("ConMode: " .. _G.LedMode, 0, 50)u8g2.SendBuffer()sys.wait(10)end
end-- 任务2--WIFI站点
function Task2_WiFI()log.info("Task2_WiFI_Init")wlan.init()-- 设置为AP模式, 广播ssid, 接收wifi客户端的链接wlan.setMode(wlan.AP)wlan.createAP("ESP32C3_AP_Mode", "12345678")log.info("Task2_WiFI_OK")-- 80端口监听事件log.info("WIFI_status:",wlan.ready())httpsrv.start(80,function(client, method, uri, headers, body)log.info("httpsrv",method, uri, json.encode(headers), body)if uri == "/led/1" then-- LED_PWM(1)_G.LedPwm_Data = 100return 200, {},"ok"elseif uri == "/led/0" then-- LED_PWM(0)_G.LedPwm_Data = 0return 200, {},"ok"elseif uri == "/mode/0" then_G.LedMode = 0return 200, {},"ok"elseif uri == "/mode/1" then_G.LedMode = 1return 200, {},"ok"-- elseif uri:find("/led_pwm/") thenelseif string.find(uri,"/led_pwm/") thenlog.info("YS:" .. string.match(uri,"%d+"))_G.LedPwm_Data = string.match(uri,"%d+")  end-- 无响应返回return 404, {}, "Not Found" .. uriend)log.info("WIFI_status:",wlan.ready())while true dosys.wait(500)end
end-- 任务3--BH1750光感
function Task3_BH1750()log.info("Task3_BH1750_OK")i2c.setup(0,i2c.FAST)bh1750.init(0)--初始化,传入i2c_idwhile 1 dolocal bh1750_data = bh1750.read_light()_G.BH1750_DATA = bh1750_datalog.info("bh1750_read_light", bh1750_data)sys.wait(1000)end
end-- 任务4--LED调光
function Task4_LEDPWM()log.info("Task4_LEDPWM_Init")-- pwm.open(12, 1000, 50)log.info("Task4_LEDPWM_OK")while true doif _G.LedMode == 0 then         -- 手动模式pwm.open(12, 1000, _G.LedPwm_Data) -- 频率1000hz, 占空比0-100elseif _G.LedMode == 1 then     -- 自动模式if _G.BH1750_DATA > 1000 then-- 强光pwm.open(12, 1000, 0)elseif _G.BH1750_DATA > 50 then-- 正常光pwm.open(12, 1000, 40)else-- 较暗pwm.open(12, 1000, 80)endendsys.wait(10)end
end-- 编写用户主事件 --
function MainTask()log.info("MainTask_OK")-- 引导任务创建 --sys.taskInit(Task0_RunLed)sys.taskInit(Task1_OLED)sys.taskInit(Task2_WiFI)sys.taskInit(Task3_BH1750)sys.taskInit(Task4_LEDPWM)
endsys.taskInit(MainTask)
sys.run()

index.html

<!DOCTYPE html>
<html>
<header><meta charset="utf-8" /><title>智能控制</title><script type="text/javascript">const progress = document.getElementById('progress');function Mode() {// 0.手动模式 1.自动模式console.log(document.getElementById('ModeText').innerText);  if (document.getElementById('ModeText').innerText.includes('手动模式')) {document.getElementById("ModeText").innerText = '自动模式'fetch("/mode/" + "1")} else {document.getElementById("ModeText").innerText = '手动模式'fetch("/mode/" + "0")}   }function led(key) {fetch("/led/" + key)document.getElementById("SunValue").innerHTML = 100 * keydocument.getElementById('progress').value = 100 * key}function myFunction() {// 获取进度条当前值  document.getElementById("SunValue").innerHTML = document.getElementById('progress').value;fetch("/led_pwm/" + document.getElementById('progress').value)}</script><style>body {display: flex;justify-content: center;align-items: center;}.Box {text-align: center;width: 80%;height: 80%;position: absolute;top: 50%;left: 50%;transform: translate(-50%, -50%);background-color: aqua;border-radius: 3%;}.ButBox,.RanBox {height: auto;}h2 {font-size: 100px;margin: 30px 20px;}p {font-size: 60px;}button {font-size: 50px;}#progress {width: 300px;/* 设置宽度 */height: 100px;/* 设置高度 */}</style>
</header><body><div class="Box"><!-- 任务：自动或手动模式 --><h2>灯光亮度控制</h2><div class="ModeBox"><p>当前模式：<span><u id="ModeText" onclick="Mode()" >手动模式</u></span></p></div><div class="ButBox"><!-- <span>手动控制</span> --><p><button onclick="led(1)">LED亮</button><button onclick="led(0)">LED灭</button></p></div><div class="RanBox"><!-- <h2>灯光亮度</h2> --><p id="SunValue">0</p><input type="range" id="progress" min="0" max="100" value="0" oninput="myFunction()"></div></div></div>
</body></html>