FISCO-BCOS 在ARM系统架构搭建节点(国密版)

问题:

使用 fisco-bcos v2.9.1 搭建一个节点,批量上链1000条数据,在上链200条-400条数据之间节点会出现异常,导致后面数据不能上链。

系统环境

操作系统:统信

查看系统构架

ld -version

root@uos-PC:/# ld -version
GNU ld (GNU Binutils for Uos) 2.31.1
Copyright (C) 2018 Free Software Foundation, Inc.
这个程序是自由软件;您可以遵循GNU 通用公共授权版本 3 或
(您自行选择的) 稍后版本以再次散布它。
这个程序完全没有任何担保。

查看CPU

root@uos-PC:/# lscpu
Architecture:        aarch64
Byte Order:          Little Endian
CPU(s):              128
On-line CPU(s) list: 0-127
Thread(s) per core:  1
Core(s) per socket:  64
Socket(s):           2
NUMA node(s):        4
Vendor ID:           0x48
Model:               0
Model name:          HUAWEI Kunpeng 920 7261K
Stepping:            0x1
BogoMIPS:            200.00
L1d cache:           64K
L1i cache:           64K
L2 cache:            512K
L3 cache:            32768K
NUMA node0 CPU(s):   0-31
NUMA node1 CPU(s):   32-63
NUMA node2 CPU(s):   64-95
NUMA node3 CPU(s):   96-127
Flags:               half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt lpae evtstrm

查看硬件架构

uname -a

root@uos-PC:/# uname -a
Linux uos-PC 4.19.0-arm64-server #3017 SMP Thu Nov 12 19:54:04 CST 2020 aarch64 GNU/Linux

原因

tbb在国产机器上卡住了 (tbb是fisco依赖的一个并行库)

解决方案

fisco工程师基于v2.9.1个性没有用tbb的版本,通过下面的下载的版本可获取

 下载源码

git clone https://github.com/FISCO-BCOS/FISCO-BCOS -b without_tbb 

注:此版本基于v2.9.1调整 

安装依赖

sudo apt install -y g++ libssl-dev openssl cmake git build-essential autoconf texinfo flex patch bison libgmp-dev zlib1g-dev automake libtoolg

编译源码

cd FISCO-BCOS

mkdir -p build && cd build

cmake -DARCH_NATIVE=on ..

root@blockchan-test:/data/blockchain/fisco_without_tbb# cd FISCO-BCOS
root@blockchan-test:/data/blockchain/fisco_without_tbb/FISCO-BCOS# mkdir -p build && cd build/
root@blockchan-test:/data/blockchain/fisco_without_tbb/FISCO-BCOS/build# cmake -DARCH_NATIVE=on ..
-- The C compiler identification is GNU 8.3.0
-- The CXX compiler identification is GNU 8.3.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done------------------------------------------------------------------------
-- Configuring FISCO-BCOS 2.9.1
------------------------------------------------------------------------
-- CMake              Cmake version and location   3.13.4 (/usr/bin/cmake)
-- Compiler           C++ compiler version         GNU 8.3.0
-- CMAKE_BUILD_TYPE   Build type                   RelWithDebInfo
-- TARGET_PLATFORM    Target platform              Linux aarch64
-- BUILD_STATIC       Build static                 OFF
-- USE_HSM_SDF        Build SDF HSM                OFF
-- DEMO               Build demos                  OFF
-- TOOL               Build tools                  OFF
-- COVERAGE           Build code coverage          OFF
-- TESTS              Build tests                  OFF
-- APPLE              Apple Machine                
-- ARCH_NATIVE        Enable native code           ON
-- DEBUG                                           OFF
-- PROF                                            OFF
-------------------------------------------------------------------------- libssl include  : /data/blockchain/fisco_without_tbb/FISCO-BCOS/deps/src/tassl/include
-- libssl libraries: /data/blockchain/fisco_without_tbb/FISCO-BCOS/deps/src/tassl/libssl.a;/data/blockchain/fisco_without_tbb/FISCO-BCOS/deps/src/tassl/libcrypto.a;dl
-- Configuring done
-- Generating done
-- Build files have been written to: /data/blockchain/fisco_without_tbb/FISCO-BCOS/build
root@blockchan-test:/data/blockchain/fisco_without_tbb/FISCO-BCOS/build# 

若不设置,则编译时中间会报错 

root@blockchan-test:/home/blockchain/src/FISCO-BCOS/build# make -j2[  3%] Performing configure step for 'cryptopp'
[  3%] Built target jsoncpp
Scanning dependencies of target evmc
[  3%] Creating directories for 'evmc'
[  3%] Performing download step (download, verify and extract) for 'evmc'
-- Downloading...dst='/home/blockchain/src/FISCO-BCOS/deps/src/evmc-4ce1c3b3.tar.gz'timeout='none'
-- Using src='https://github.com/FISCO-BCOS/evmc/archive/4ce1c3b35346db162443a6975ac8801910533138.tar.gz'
CMake Error at /home/blockchain/src/FISCO-BCOS/deps/src/cryptopp-stamp/cryptopp-configure-RelWithDebInfo.cmake:16 (message):Command failed: 1'/usr/bin/cmake' '-DCMAKE_INSTALL_PREFIX=/home/blockchain/src/FISCO-BCOS/deps' '-DCMAKE_BUILD_TYPE=Release' '-DCMAKE_INSTALL_LIBDIR=lib' '-DCMAKE_POSITION_INDEPENDENT_CODE=OFF' '-DBUILD_SHARED=OFF' '-DBUILD_TESTING=OFF' '-DCMAKE_C_FLAGS='-march=x86-64 -mtune=generic -fvisibility=hidden -fvisibility-inlines-hidden'' '-DCMAKE_CXX_FLAGS='-march=x86-64 -mtune=generic -fvisibility=hidden -fvisibility-inlines-hidden'' '-DCMAKE_C_COMPILER=/usr/bin/cc' '-DCMAKE_CXX_COMPILER=/usr/bin/c++' '-GUnix Makefiles' '/home/blockchain/src/FISCO-BCOS/deps/src/cryptopp'

编译 

 make -j4 

root@blockchan-test:/data/blockchain/fisco_without_tbb/FISCO-BCOS/build# make -j4
Scanning dependencies of target evmc
Scanning dependencies of target jsoncpp
Scanning dependencies of target cryptopp
Scanning dependencies of target libvrf
[  0%] Performing download step (download, verify and extract) for 'libvrf'
[  0%] Completed 'jsoncpp'
[  0%] Completed 'evmc'
[  0%] Completed 'cryptopp'
-- verifying file...file='/data/blockchain/fisco_without_tbb/FISCO-BCOS/deps/src/libvrf-rust1.47_0303.tar.gz'
-- SHA256 hash of/data/blockchain/fisco_without_tbb/FISCO-BCOS/deps/src/libvrf-rust1.47_0303.tar.gzdoes not match expected valueexpected: 'afcd18e52b57516f92f7a7901c0bdedcc488e43dd8401d0e06cf0963db15bd07'actual: '9775d47d980ad08de8f481c5c5879ef11af8e301481aaf042db1d800f1088383'
-- File already exists but hash mismatch. Removing...
-- Downloading...dst='/data/blockchain/fisco_without_tbb/FISCO-BCOS/deps/src/libvrf-rust1.47_0303.tar.gz'timeout='none'
-- Using src='https://raw.githubusercontent.com/FISCO-BCOS/LargeFiles/master/libs/libvrf-rust1.47_0303.tar.gz'
[  2%] Built target jsoncpp
[  4%] Built target evmc
[  6%] Built target cryptopp
Scanning dependencies of target snappy
Scanning dependencies of target leveldb
Scanning dependencies of target BuildInfo.h
[  6%] Completed 'snappy'
[  6%] Completed 'leveldb'
[  8%] Built target snappy
[ 10%] Built target leveldb
Scanning dependencies of target tassl
Scanning dependencies of target mhd
[ 10%] Completed 'tassl'
[ 11%] Completed 'mhd'
[ 13%] Built target tassl
[ 14%] Built target mhd
Scanning dependencies of target tbb
Scanning dependencies of target paillier
[ 15%] Completed 'tbb'
[ 15%] Completed 'paillier'
[ 17%] Built target paillier
[ 18%] Built target tbb
Scanning dependencies of target mpir
Scanning dependencies of target secp256k1
[ 18%] Creating directories for 'mpir'
[ 18%] Completed 'secp256k1'
[ 20%] Built target secp256k1
Scanning dependencies of target mysqlclient
[ 20%] Completed 'mysqlclient'
[ 21%] Performing download step (download, verify and extract) for 'mpir'
[ 21%] Built target BuildInfo.h
[ 23%] Built target mysqlclient
Scanning dependencies of target jsonrpccpp
Scanning dependencies of target gperftools
[ 23%] Completed 'jsonrpccpp'
[ 23%] Completed 'gperftools'
[ 25%] Built target jsonrpccpp
[ 27%] Built target gperftools
Scanning dependencies of target GroupSigLib
Scanning dependencies of target evmone
[ 27%] Completed 'GroupSigLib'
[ 28%] Completed 'evmone'
[ 30%] Built target GroupSigLib
[ 32%] Built target evmone
Scanning dependencies of target rocksdb
Scanning dependencies of target boost
[ 32%] Completed 'rocksdb'
[ 32%] Completed 'boost'
[ 34%] Built target rocksdb
[ 36%] Built target boost
Scanning dependencies of target libzdb
Scanning dependencies of target devcore
[ 36%] Performing configure step for 'libzdb'
[ 36%] Building CXX object libdevcore/CMakeFiles/devcore.dir/Address.cpp.o
-- mpir download command succeeded.  See also /data/blockchain/fisco_without_tbb/FISCO-BCOS/build/deps/src/mpir-stamp/mpir-download-*.log
[ 36%] No patch step for 'mpir'
[ 36%] No update step for 'mpir'
[ 36%] Performing configure step for 'mpir'
-- libzdb configure command succeeded.  See also /data/blockchain/fisco_without_tbb/FISCO-BCOS/deps/src/libzdb-stamp/libzdb-configure-*.log
[ 36%] Performing build step for 'libzdb'
-- libzdb build command succeeded.  See also /data/blockchain/fisco_without_tbb/FISCO-BCOS/deps/src/libzdb-stamp/libzdb-build-*.log
[ 37%] No install step for 'libzdb'
[ 37%] Completed 'libzdb'
[ 38%] Built target libzdb
[ 38%] Building CXX object libdevcore/CMakeFiles/devcore.dir/Base64.cpp.o
[ 39%] Building CXX object libdevcore/CMakeFiles/devcore.dir/BasicLevelDB.cpp.o
-- mpir configure command succeeded.  See also /data/blockchain/fisco_without_tbb/FISCO-BCOS/build/deps/src/mpir-stamp/mpir-configure-*.log
[ 40%] Performing build step for 'mpir'
[ 40%] Building CXX object libdevcore/CMakeFiles/devcore.dir/Common.cpp.o
[ 40%] Building CXX object libdevcore/CMakeFiles/devcore.dir/CommonData.cpp.o
[ 40%] Building CXX object libdevcore/CMakeFiles/devcore.dir/CommonIO.cpp.o
[ 41%] Building CXX object libdevcore/CMakeFiles/devcore.dir/CommonJS.cpp.o
[ 41%] Building CXX object libdevcore/CMakeFiles/devcore.dir/FileSystem.cpp.o
[ 41%] Building CXX object libdevcore/CMakeFiles/devcore.dir/FixedHash.cpp.o
[ 42%] Building CXX object libdevcore/CMakeFiles/devcore.dir/LevelDB.cpp.o
[ 42%] Building CXX object libdevcore/CMakeFiles/devcore.dir/Log.cpp.o
[ 42%] Building CXX object libdevcore/CMakeFiles/devcore.dir/RLP.cpp.o
[ 42%] Building CXX object libdevcore/CMakeFiles/devcore.dir/SnappyCompress.cpp.o
[ 43%] Building CXX object libdevcore/CMakeFiles/devcore.dir/Timer.cpp.o
[ 43%] Building CXX object libdevcore/CMakeFiles/devcore.dir/TreeTopology.cpp.o
[ 43%] Building CXX object libdevcore/CMakeFiles/devcore.dir/TrieCommon.cpp.o
[ 43%] Building CXX object libdevcore/CMakeFiles/devcore.dir/TrieHash.cpp.o
[ 44%] Building CXX object libdevcore/CMakeFiles/devcore.dir/TrieHash2.cpp.o
-- mpir build command succeeded.  See also /data/blockchain/fisco_without_tbb/FISCO-BCOS/build/deps/src/mpir-stamp/mpir-build-*.log
[ 44%] Performing install step for 'mpir'
-- mpir install command succeeded.  See also /data/blockchain/fisco_without_tbb/FISCO-BCOS/build/deps/src/mpir-stamp/mpir-install-*.log
[ 45%] Completed 'mpir'
[ 45%] Built target mpir
[ 45%] Building CXX object libdevcore/CMakeFiles/devcore.dir/Worker.cpp.o
Scanning dependencies of target libff
[ 46%] Creating directories for 'libff'
[ 46%] Performing download step (download, verify and extract) for 'libff'
-- libff download command succeeded.  See also /data/blockchain/fisco_without_tbb/FISCO-BCOS/build/deps/src/libff-stamp/libff-download-*.log
[ 46%] No patch step for 'libff'
[ 46%] No update step for 'libff'
[ 47%] Performing configure step for 'libff'
-- libff configure command succeeded.  See also /data/blockchain/fisco_without_tbb/FISCO-BCOS/build/deps/src/libff-stamp/libff-configure-*.log
[ 47%] Performing build step for 'libff'
[ 47%] Linking CXX static library libdevcore.a
[ 47%] Built target devcore
Scanning dependencies of target flowlimit
Scanning dependencies of target stat
[ 47%] Building CXX object libflowlimit/CMakeFiles/flowlimit.dir/RPCQPSLimiter.cpp.o
[ 48%] Building CXX object libstat/CMakeFiles/stat.dir/ChannelNetworkStatHandler.cpp.o
[ 48%] Building CXX object libflowlimit/CMakeFiles/flowlimit.dir/RateLimiter.cpp.o
[ 48%] Building CXX object libstat/CMakeFiles/stat.dir/NetworkStatHandler.cpp.o
[ 49%] Linking CXX static library libflowlimit.a
[ 49%] Built target flowlimit
[ 49%] Linking CXX static library libstat.a
[ 49%] Built target stat
-- libff build command succeeded.  See also /data/blockchain/fisco_without_tbb/FISCO-BCOS/build/deps/src/libff-stamp/libff-build-*.log
[ 49%] Performing install step for 'libff'
-- libff install command succeeded.  See also /data/blockchain/fisco_without_tbb/FISCO-BCOS/build/deps/src/libff-stamp/libff-install-*.log
[ 49%] Completed 'libff'
[ 49%] Built target libff
Scanning dependencies of target devcrypto
[ 50%] Building CXX object libdevcrypto/CMakeFiles/devcrypto.dir/Blake2.cpp.o
[ 50%] Building CXX object libdevcrypto/CMakeFiles/devcrypto.dir/AES.cpp.o
[ 50%] Building CXX object libdevcrypto/CMakeFiles/devcrypto.dir/Common.cpp.o
[ 50%] Building CXX object libdevcrypto/CMakeFiles/devcrypto.dir/CryptoInterface.cpp.o
[ 51%] Building CXX object libdevcrypto/CMakeFiles/devcrypto.dir/ECDSASignature.cpp.o
[ 51%] Building CXX object libdevcrypto/CMakeFiles/devcrypto.dir/Hash.cpp.o
[ 51%] Building CXX object libdevcrypto/CMakeFiles/devcrypto.dir/LibFF.cpp.o
[ 51%] Building CXX object libdevcrypto/CMakeFiles/devcrypto.dir/SM2Signature.cpp.o
[ 52%] Building CXX object libdevcrypto/CMakeFiles/devcrypto.dir/SM3Hash.cpp.o
[ 52%] Building CXX object libdevcrypto/CMakeFiles/devcrypto.dir/SM4Crypto.cpp.o
[ 52%] Building CXX object libdevcrypto/CMakeFiles/devcrypto.dir/sm2/sm2.cpp.o
[ 53%] Building CXX object libdevcrypto/CMakeFiles/devcrypto.dir/sm3/sm3.cpp.o
[ 53%] Building CXX object libdevcrypto/CMakeFiles/devcrypto.dir/sm4/sm4.cpp.o
[ 53%] Linking CXX static library libdevcrypto.a
[ 53%] Built target devcrypto
Scanning dependencies of target network
Scanning dependencies of target ethcore
[ 54%] Building CXX object libethcore/CMakeFiles/ethcore.dir/ABI.cpp.o
[ 54%] Building CXX object libethcore/CMakeFiles/ethcore.dir/ABIParser.cpp.o
[ 54%] Building CXX object libnetwork/CMakeFiles/network.dir/ASIOInterface.cpp.o
[ 54%] Building CXX object libethcore/CMakeFiles/ethcore.dir/Block.cpp.o
[ 54%] Building CXX object libethcore/CMakeFiles/ethcore.dir/BlockHeader.cpp.o
[ 55%] Building CXX object libnetwork/CMakeFiles/network.dir/Common.cpp.o
[ 55%] Building CXX object libethcore/CMakeFiles/ethcore.dir/Common.cpp.o
[ 56%] Building CXX object libethcore/CMakeFiles/ethcore.dir/EVMFlags.cpp.o
[ 56%] Building CXX object libethcore/CMakeFiles/ethcore.dir/LogEntry.cpp.o
[ 56%] Building CXX object libnetwork/CMakeFiles/network.dir/Host.cpp.o
[ 56%] Building CXX object libethcore/CMakeFiles/ethcore.dir/PartiallyBlock.cpp.o
[ 56%] Building CXX object libnetwork/CMakeFiles/network.dir/PeerWhitelist.cpp.o
[ 57%] Building CXX object libethcore/CMakeFiles/ethcore.dir/Precompiled.cpp.o
[ 57%] Building CXX object libnetwork/CMakeFiles/network.dir/Session.cpp.o
[ 57%] Building CXX object libethcore/CMakeFiles/ethcore.dir/PrecompiledContract.cpp.o
[ 57%] Building CXX object libethcore/CMakeFiles/ethcore.dir/Transaction.cpp.o
[ 57%] Building CXX object libethcore/CMakeFiles/ethcore.dir/TransactionException.cpp.o
[ 58%] Building CXX object libethcore/CMakeFiles/ethcore.dir/TransactionReceipt.cpp.o
[ 58%] Building CXX object libethcore/CMakeFiles/ethcore.dir/TxsParallelParser.cpp.o
[ 59%] Linking CXX static library libnetwork.a
[ 59%] Built target network
Scanning dependencies of target p2p
[ 59%] Building CXX object libp2p/CMakeFiles/p2p.dir/P2PMessage.cpp.o
[ 59%] Building CXX object libp2p/CMakeFiles/p2p.dir/P2PMessageRC2.cpp.o
[ 59%] Linking CXX static library libethcore.a
[ 59%] Built target ethcore
[ 59%] Building CXX object libp2p/CMakeFiles/p2p.dir/P2PSession.cpp.o
[ 60%] Building CXX object libp2p/CMakeFiles/p2p.dir/Service.cpp.o
Scanning dependencies of target eventfilter
[ 60%] Building CXX object libeventfilter/CMakeFiles/eventfilter.dir/EventLogFilter.cpp.o
[ 61%] Building CXX object libeventfilter/CMakeFiles/eventfilter.dir/EventLogFilterManager.cpp.o
Scanning dependencies of target txpool
[ 62%] Building CXX object libtxpool/CMakeFiles/txpool.dir/CommonTransactionNonceCheck.cpp.o
[ 62%] Building CXX object libeventfilter/CMakeFiles/eventfilter.dir/EventLogFilterParams.cpp.o
[ 62%] Building CXX object libtxpool/CMakeFiles/txpool.dir/TransactionNonceCheck.cpp.o
[ 62%] Linking CXX static library libp2p.a
[ 62%] Built target p2p
[ 62%] Building CXX object libtxpool/CMakeFiles/txpool.dir/TxPool.cpp.o
[ 62%] Linking CXX static library libeventfilter.a
[ 62%] Built target eventfilter
[ 63%] Linking CXX static library libtxpool.a
[ 63%] Built target txpool
-- verifying file...file='/data/blockchain/fisco_without_tbb/FISCO-BCOS/deps/src/libvrf-rust1.47_0303.tar.gz'
-- Downloading... done
-- extracting...src='/data/blockchain/fisco_without_tbb/FISCO-BCOS/deps/src/libvrf-rust1.47_0303.tar.gz'dst='/data/blockchain/fisco_without_tbb/FISCO-BCOS/deps/src/libvrf'
-- extracting... [tar xfz]
-- extracting... [analysis]
-- extracting... [rename]
-- extracting... [clean up]
-- extracting... done
[ 64%] No update step for 'libvrf'
[ 64%] No patch step for 'libvrf'
[ 64%] No configure step for 'libvrf'
[ 64%] No build step for 'libvrf'
[ 65%] Performing install step for 'libvrf'
-- libvrf install command succeeded.  See also /data/blockchain/fisco_without_tbb/FISCO-BCOS/deps/src/libvrf-stamp/libvrf-install-*.log
[ 65%] Completed 'libvrf'
[ 65%] Built target libvrf
Scanning dependencies of target blockverifier
[ 65%] Building CXX object libblockverifier/CMakeFiles/blockverifier.dir/BlockVerifier.cpp.o
[ 66%] Building CXX object libblockverifier/CMakeFiles/blockverifier.dir/DAG.cpp.o
[ 66%] Building CXX object libblockverifier/CMakeFiles/blockverifier.dir/ExecutiveContext.cpp.o
[ 66%] Building CXX object libblockverifier/CMakeFiles/blockverifier.dir/ExecutiveContextFactory.cpp.o
[ 67%] Building CXX object libblockverifier/CMakeFiles/blockverifier.dir/TxDAG.cpp.o
[ 67%] Linking CXX static library libblockverifier.a
[ 67%] Built target blockverifier
Scanning dependencies of target executivecontext
[ 67%] Building CXX object libexecutive/CMakeFiles/executivecontext.dir/EVMHostContext.cpp.o
[ 67%] Building CXX object libexecutive/CMakeFiles/executivecontext.dir/EVMHostInterface.cpp.o
[ 67%] Building CXX object libexecutive/CMakeFiles/executivecontext.dir/EVMInstance.cpp.o
[ 68%] Building CXX object libexecutive/CMakeFiles/executivecontext.dir/Executive.cpp.o
[ 68%] Building CXX object libexecutive/CMakeFiles/executivecontext.dir/VMFactory.cpp.o
[ 68%] Linking CXX static library libexecutivecontext.a
[ 68%] Built target executivecontext
Scanning dependencies of target precompiled
[ 68%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/AccountInfoUtility.cpp.o
[ 69%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/CNSPrecompiled.cpp.o
[ 69%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/CRUDPrecompiled.cpp.o
[ 69%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/ChainGovernancePrecompiled.cpp.o
[ 70%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/Common.cpp.o
[ 70%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/ConditionPrecompiled.cpp.o
[ 70%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/ConsensusPrecompiled.cpp.o
[ 70%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/ContractLifeCyclePrecompiled.cpp.o
[ 71%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/EntriesPrecompiled.cpp.o
[ 71%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/EntryPrecompiled.cpp.o
[ 71%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/GasChargeManagePrecompiled.cpp.o
[ 71%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/KVTableFactoryPrecompiled.cpp.o
[ 72%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/KVTablePrecompiled.cpp.o
[ 72%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/ParallelConfigPrecompiled.cpp.o
[ 72%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/PermissionPrecompiled.cpp.o
[ 73%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/Precompiled.cpp.o
[ 73%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/PrecompiledGas.cpp.o
[ 73%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/SystemConfigPrecompiled.cpp.o
[ 73%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/TableFactoryPrecompiled.cpp.o
[ 74%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/TablePrecompiled.cpp.o
[ 74%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/WorkingSealerManagerImpl.cpp.o
[ 74%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/WorkingSealerManagerPrecompiled.cpp.o
[ 74%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/extension/CryptoPrecompiled.cpp.o
[ 75%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/extension/DagTransferPrecompiled.cpp.o
[ 75%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/extension/GroupSigPrecompiled.cpp.o
[ 75%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/extension/HelloWorldPrecompiled.cpp.o
[ 76%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/extension/PaillierPrecompiled.cpp.o
[ 76%] Building CXX object libprecompiled/CMakeFiles/precompiled.dir/extension/RingSigPrecompiled.cpp.o
[ 76%] Linking CXX static library libprecompiled.a
[ 76%] Built target precompiled
Scanning dependencies of target storage
[ 76%] Building CXX object libstorage/CMakeFiles/storage.dir/BasicRocksDB.cpp.o
[ 77%] Building CXX object libstorage/CMakeFiles/storage.dir/BinaryLogStorage.cpp.o
[ 77%] Building CXX object libstorage/CMakeFiles/storage.dir/BinLogHandler.cpp.o
[ 77%] Building CXX object libstorage/CMakeFiles/storage.dir/CachedStorage.cpp.o
[ 77%] Building CXX object libstorage/CMakeFiles/storage.dir/Common.cpp.o
[ 78%] Building CXX object libstorage/CMakeFiles/storage.dir/LevelDBStorage.cpp.o
[ 78%] Building CXX object libstorage/CMakeFiles/storage.dir/MemoryTable2.cpp.o
[ 78%] Building CXX object libstorage/CMakeFiles/storage.dir/MemoryTableFactory.cpp.o
/data/blockchain/fisco_without_tbb/FISCO-BCOS/libstorage/MemoryTable2.cpp: In member function ‘dev::storage::TableData::Ptr dev::storage::MemoryTable2::dumpWithoutOptimize()’:
/data/blockchain/fisco_without_tbb/FISCO-BCOS/libstorage/MemoryTable2.cpp:374:44: warning: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Wsign-compare]for (auto i = 0; i < _p.second->size(); ++i)~~^~~~~~~~~~~~~~~~~~~
/data/blockchain/fisco_without_tbb/FISCO-BCOS/libstorage/MemoryTable2.cpp: In member function ‘virtual dev::storage::TableData::Ptr dev::storage::MemoryTable2::dump()’:
/data/blockchain/fisco_without_tbb/FISCO-BCOS/libstorage/MemoryTable2.cpp:502:44: warning: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Wsign-compare]for (auto i = 0; i < _p.second->size(); ++i)~~^~~~~~~~~~~~~~~~~~~
[ 79%] Building CXX object libstorage/CMakeFiles/storage.dir/MemoryTableFactory2.cpp.o
[ 79%] Building CXX object libstorage/CMakeFiles/storage.dir/RocksDBStorage.cpp.o
[ 79%] Building CXX object libstorage/CMakeFiles/storage.dir/RocksDBStorageFactory.cpp.o
[ 79%] Building CXX object libstorage/CMakeFiles/storage.dir/SQLBasicAccess.cpp.o
[ 80%] Building CXX object libstorage/CMakeFiles/storage.dir/SQLConnectionPool.cpp.o
[ 80%] Building CXX object libstorage/CMakeFiles/storage.dir/SQLStorage.cpp.o
[ 80%] Building CXX object libstorage/CMakeFiles/storage.dir/ScalableStorage.cpp.o
[ 80%] Building CXX object libstorage/CMakeFiles/storage.dir/Table.cpp.o
[ 81%] Building CXX object libstorage/CMakeFiles/storage.dir/ZdbStorage.cpp.o
[ 81%] Linking CXX static library libstorage.a
[ 81%] Built target storage
Scanning dependencies of target blockchain
Scanning dependencies of target security
Scanning dependencies of target storagestate
[ 81%] Building CXX object libstoragestate/CMakeFiles/storagestate.dir/StorageState.cpp.o
[ 82%] Building CXX object libstoragestate/CMakeFiles/storagestate.dir/StorageStateFactory.cpp.o
[ 82%] Building CXX object libblockchain/CMakeFiles/blockchain.dir/BlockChainImp.cpp.o
[ 82%] Building CXX object libsecurity/CMakeFiles/security.dir/EncryptedFile.cpp.o
[ 83%] Building CXX object libsecurity/CMakeFiles/security.dir/EncryptedLevelDB.cpp.o
[ 83%] Building CXX object libsecurity/CMakeFiles/security.dir/KeyCenter.cpp.o
[ 83%] Linking CXX static library libstoragestate.a
[ 83%] Built target storagestate
[ 83%] Linking CXX static library libblockchain.a
[ 83%] Built target blockchain
Scanning dependencies of target sync
[ 83%] Building CXX object libsync/CMakeFiles/sync.dir/DownloadingBlockQueue.cpp.o
[ 83%] Building CXX object libsync/CMakeFiles/sync.dir/DownloadingTxsQueue.cpp.o
[ 84%] Building CXX object libsync/CMakeFiles/sync.dir/GossipBlockStatus.cpp.o
[ 84%] Linking CXX static library libsecurity.a
[ 84%] Built target security
Scanning dependencies of target mptstate
[ 84%] Building CXX object libmptstate/CMakeFiles/mptstate.dir/Account.cpp.o
[ 84%] Building CXX object libmptstate/CMakeFiles/mptstate.dir/Defaults.cpp.o
[ 84%] Building CXX object libsync/CMakeFiles/sync.dir/NodeTimeMaintenance.cpp.o
[ 84%] Building CXX object libmptstate/CMakeFiles/mptstate.dir/MPTState.cpp.o
[ 84%] Building CXX object libsync/CMakeFiles/sync.dir/RspBlockReq.cpp.o
[ 84%] Building CXX object libsync/CMakeFiles/sync.dir/SyncMaster.cpp.o
[ 85%] Building CXX object libmptstate/CMakeFiles/mptstate.dir/MPTStateFactory.cpp.o
[ 86%] Building CXX object libsync/CMakeFiles/sync.dir/SyncMsgEngine.cpp.o
[ 86%] Building CXX object libsync/CMakeFiles/sync.dir/SyncMsgPacket.cpp.o
[ 86%] Building CXX object libmptstate/CMakeFiles/mptstate.dir/MemoryDB.cpp.o
[ 86%] Building CXX object libmptstate/CMakeFiles/mptstate.dir/OverlayDB.cpp.o
[ 86%] Building CXX object libsync/CMakeFiles/sync.dir/SyncStatus.cpp.o
[ 87%] Building CXX object libsync/CMakeFiles/sync.dir/SyncTransaction.cpp.o
[ 88%] Building CXX object libmptstate/CMakeFiles/mptstate.dir/State.cpp.o
[ 88%] Building CXX object libsync/CMakeFiles/sync.dir/SyncTreeTopology.cpp.o
[ 88%] Linking CXX static library libsync.a
[ 88%] Built target sync
Scanning dependencies of target consensus
[ 88%] Linking CXX static library libmptstate.a
[ 88%] Built target mptstate
[ 88%] Building CXX object libconsensus/CMakeFiles/consensus.dir/ConsensusEngineBase.cpp.o
[ 89%] Building CXX object libconsensus/CMakeFiles/consensus.dir/Sealer.cpp.o
[ 89%] Building CXX object libconsensus/CMakeFiles/consensus.dir/pbft/PBFTEngine.cpp.o
[ 89%] Building CXX object libconsensus/CMakeFiles/consensus.dir/pbft/PBFTReqCache.cpp.o
[ 89%] Building CXX object libconsensus/CMakeFiles/consensus.dir/pbft/PBFTSealer.cpp.o
[ 90%] Building CXX object libconsensus/CMakeFiles/consensus.dir/pbft/PartiallyPBFTReqCache.cpp.o
[ 90%] Building CXX object libconsensus/CMakeFiles/consensus.dir/raft/RaftEngine.cpp.o
[ 90%] Building CXX object libconsensus/CMakeFiles/consensus.dir/raft/RaftSealer.cpp.o
[ 91%] Building CXX object libconsensus/CMakeFiles/consensus.dir/rotating_pbft/RPBFTReqCache.cpp.o
[ 91%] Building CXX object libconsensus/CMakeFiles/consensus.dir/rotating_pbft/RotatingPBFTEngine.cpp.o
[ 91%] Building CXX object libconsensus/CMakeFiles/consensus.dir/rotating_pbft/vrf_rpbft/VRFBasedrPBFTEngine.cpp.o
[ 91%] Building CXX object libconsensus/CMakeFiles/consensus.dir/rotating_pbft/vrf_rpbft/VRFBasedrPBFTSealer.cpp.o
[ 92%] Linking CXX static library libconsensus.a
[ 92%] Built target consensus
Scanning dependencies of target ledger
[ 93%] Building CXX object libledger/CMakeFiles/ledger.dir/DBInitializer.cpp.o
[ 93%] Building CXX object libledger/CMakeFiles/ledger.dir/Ledger.cpp.o
[ 93%] Building CXX object libledger/CMakeFiles/ledger.dir/LedgerManager.cpp.o
[ 93%] Building CXX object libledger/CMakeFiles/ledger.dir/LedgerParam.cpp.o
[ 94%] Linking CXX static library libledger.a
[ 94%] Built target ledger
Scanning dependencies of target initializer
[ 94%] Building CXX object libinitializer/CMakeFiles/initializer.dir/BoostLogInitializer.cpp.o
[ 94%] Building CXX object libinitializer/CMakeFiles/initializer.dir/GlobalConfigureInitializer.cpp.o
[ 95%] Building CXX object libinitializer/CMakeFiles/initializer.dir/Initializer.cpp.o
[ 95%] Building CXX object libinitializer/CMakeFiles/initializer.dir/LedgerInitializer.cpp.o
[ 95%] Building CXX object libinitializer/CMakeFiles/initializer.dir/P2PInitializer.cpp.o
[ 95%] Building CXX object libinitializer/CMakeFiles/initializer.dir/RPCInitializer.cpp.o
[ 96%] Building CXX object libinitializer/CMakeFiles/initializer.dir/SecureInitializer.cpp.o
[ 96%] Linking CXX static library libinitializer.a
[ 96%] Built target initializer
Scanning dependencies of target rpc
[ 96%] Building CXX object librpc/CMakeFiles/rpc.dir/Common.cpp.o
[ 97%] Building CXX object librpc/CMakeFiles/rpc.dir/JsonHelper.cpp.o
[ 97%] Building CXX object librpc/CMakeFiles/rpc.dir/Rpc.cpp.o
[ 97%] Building CXX object librpc/CMakeFiles/rpc.dir/SafeHttpServer.cpp.o
[ 98%] Building CXX object librpc/CMakeFiles/rpc.dir/StatisticProtocolServer.cpp.o
[ 98%] Linking CXX static library librpc.a
[ 98%] Built target rpc
Scanning dependencies of target channelserver
[ 98%] Building CXX object libchannelserver/CMakeFiles/channelserver.dir/ChannelRPCServer.cpp.o
[ 99%] Building CXX object libchannelserver/CMakeFiles/channelserver.dir/ChannelServer.cpp.o
[ 99%] Building CXX object libchannelserver/CMakeFiles/channelserver.dir/ChannelSession.cpp.o
[ 99%] Linking CXX static library libchannelserver.a
[ 99%] Built target channelserver
Scanning dependencies of target fisco-bcos
[ 99%] Building CXX object fisco-bcos/main/CMakeFiles/fisco-bcos.dir/main.cpp.o
[100%] Linking CXX executable ../../bin/fisco-bcos
[100%] Built target fisco-bcos

查看编译后的版本信息

编译后,文件在bin目录中

 cd bin

./fisco-bcos -v

root@blockchan-test:/data/blockchain/fisco_without_tbb/FISCO-BCOS/build# cd bin/
root@blockchan-test:/data/blockchain/fisco_without_tbb/FISCO-BCOS/build/bin# ./fisco-bcos -v
FISCO-BCOS Version : 2.9.1
Build Time         : 20231202 15:58:39
Build Type         : Linux/g++/RelWithDebInfo
Git Branch         : without-tbb
Git Commit Hash    : e7da1fc6867fcbdbeaedd5e71e49bc7e15fd9282

下载安装脚本

cd .. && cd ..
curl -#LO https://github.com/FISCO-BCOS/FISCO-BCOS/releases/download/v2.9.1/build_chain.sh && chmod u+x build_chain.sh 
root@blockchan-test:/data/blockchain/fisco_without_tbb# curl -#LO https://github.com/FISCO-BCOS/FISCO-BCOS/releases/download/v2.9.1/build_chain.sh && chmod u+x build_chain.sh
################################################################################################################################ 100.0%

生成节点 

生成一个国密版节点

bash build_chain.sh -l 127.0.0.1:1 -p 30300,20200,8545 -e FISCO-BCOS/build/bin/fisco-bcos -g -G 

root@blockchan-test:/data/blockchain/fisco_without_tbb# bash build_chain.sh -l 127.0.0.1:1 -p 30300,20200,8545 -e FISCO-BCOS/build/bin/fisco-bcos -g -G 
Checking fisco-bcos binary...
Binary check passed.
==============================================================
Generating CA key...
Generating Guomi CA key...
==============================================================
Generating keys and certificates ...
Processing IP=127.0.0.1 Total=1 Agency=agency Groups=1
==============================================================
Generating configuration files ...
Processing IP=127.0.0.1 Total=1 Agency=agency Groups=1
==============================================================
[INFO] FISCO-BCOS Path : FISCO-BCOS/build/bin/fisco-bcos
[INFO] Start Port      : 30300 20200 8545
[INFO] Server IP       : 127.0.0.1:1
[INFO] Output Dir      : /data/blockchain/fisco_without_tbb/nodes
[INFO] CA Path         : /data/blockchain/fisco_without_tbb/nodes/cert/
[INFO] Guomi CA Path   : /data/blockchain/fisco_without_tbb/nodes/gmcert/
[INFO] Guomi mode      : true
[INFO] SM channel      : true
==============================================================
[INFO] Execute the download_console.sh script in directory named by IP to get FISCO-BCOS console.
e.g.  bash /data/blockchain/fisco_without_tbb/nodes/127.0.0.1/download_console.sh -f
==============================================================
[INFO] All completed. Files in /data/blockchain/fisco_without_tbb/nodes

查看生成文件

root@blockchan-test:/data/blockchain/fisco_without_tbb# ls
build_chain.sh  FISCO-BCOS  gmcert.cnf  gmsm2.param  nodes
root@blockchan-test:/data/blockchain/fisco_without_tbb# tree nodes/
nodes/
├── 127.0.0.1
│   ├── download_bin.sh
│   ├── download_console.sh
│   ├── fisco-bcos
│   ├── node0
│   │   ├── conf
│   │   │   ├── channel_cert
│   │   │   │   ├── ca.crt
│   │   │   │   ├── node.crt
│   │   │   │   └── node.key
│   │   │   ├── gmca.crt
│   │   │   ├── gmennode.crt
│   │   │   ├── gmennode.key
│   │   │   ├── gmnode.crt
│   │   │   ├── gmnode.key
│   │   │   ├── gmnode.nodeid
│   │   │   ├── gmnode.serial
│   │   │   ├── group.1.genesis
│   │   │   ├── group.1.ini
│   │   │   └── origin_cert
│   │   │       ├── ca.crt
│   │   │       ├── node.crt
│   │   │       └── node.key
│   │   ├── config.ini
│   │   ├── scripts
│   │   │   ├── load_new_groups.sh
│   │   │   ├── monitor.sh
│   │   │   ├── reload_sdk_allowlist.sh
│   │   │   └── reload_whitelist.sh
│   │   ├── start.sh
│   │   └── stop.sh
│   ├── sdk
│   │   ├── ca.crt
│   │   ├── gm
│   │   │   ├── gmca.crt
│   │   │   ├── gmensdk.crt
│   │   │   ├── gmensdk.key
│   │   │   ├── gmsdk.crt
│   │   │   ├── gmsdk.key
│   │   │   └── gmsdk.publickey
│   │   ├── sdk.crt
│   │   └── sdk.key
│   ├── start_all.sh
│   └── stop_all.sh
├── cert
│   ├── agency
│   │   ├── agency.crt
│   │   ├── agency.key
│   │   ├── agency.srl
│   │   ├── ca.crt
│   │   ├── cert.cnf
│   │   └── channel
│   │       ├── ca.crt
│   │       ├── ca.key
│   │       └── ca.srl
│   ├── ca.crt
│   ├── ca.key
│   ├── ca.srl
│   └── cert.cnf
├── cert.cnf
└── gmcert├── agency-gm│   ├── gmagency.crt│   ├── gmagency.key│   ├── gmagency.srl│   ├── gmca.crt│   ├── gmcert.cnf│   └── gmsm2.param├── gmca.crt├── gmca.key├── gmca.srl├── gmcert.cnf└── gmsm2.param13 directories, 60 files

参考文档

FISCO BCOS 源码编译 — FISCO BCOS 2.0 v2.9.0 文档

搭建第一个区块链网络 — FISCO BCOS 2.0 v2.9.0 文档

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处:http://www.mzph.cn/news/190833.shtml

如若内容造成侵权/违法违规/事实不符,请联系多彩编程网进行投诉反馈email:809451989@qq.com,一经查实,立即删除!

相关文章

聊聊测试for Jeffky

什么是测试 测试是一个系统性的过程&#xff0c;它涉及到在已开发的软件中执行程序、应用工具和技术来评估其质量、功能和性能。这个过程的目的是发现并纠正程序中的错误&#xff0c;提高软件的可靠性和稳定性&#xff0c;以满足用户的需求。 测试的分类 什么是自动化测试 自动…

TCP报文解析

1.端口号 标记同一台计算机上的不同进程 源端口&#xff1a;占2个字节&#xff0c;源端口和IP的作用是标记报文的返回地址。 目的端口&#xff1a;占2个字节&#xff0c;指明接收方计算机上的应用程序接口。 TCP报头中的源端口号和目的端口号同IP报头中的源IP和目的IP唯一确定一…

《第一行代码:Android》第三版4.2常用控件的使用方法(1)

概述 本文主要讲解常用控件的使用&#xff0c;包括&#xff1a;TextView、Button、EditText、ImageView、ProgressBar、AlertDialog。 布局文件 布局文件是activity_main.xml,内容如下&#xff1a; <?xml version"1.0" encoding"utf-8"?> <…

re:Invent大会,亚马逊云科技为用户提供端到端的AI服务

11月末&#xff0c;若是你降落在拉斯维加斯麦卡伦国际机场&#xff0c;或许会在大厅里看到一排排AI企业和云厂商相关的夸张标语。走向出口的路上&#xff0c;你的身边会不断穿梭过穿着印有“AI21Lab”“Anthropic”等字样的AI企业员工。或许&#xff0c;你还会被机场工作人员主…

Linux MIPI 调试中常见的问题

一、概述 做嵌入式工作的小伙伴知道&#xff0c;有时候程序编写没有调试过程中费时&#xff0c;之间笔记里有 MIPI 摄像头驱动开发的过程&#xff0c;有需要的小伙伴可以参考&#xff1a;Linux RN6752 驱动编写。而我也是第一次琢磨 MIPI 协议&#xff0c;其中有很多不明白的地…

华清远见嵌入式学习——C++——作业4

作业要求&#xff1a; 代码&#xff1a; #include <iostream>using namespace std;class Stu {friend const Stu operator*(const Stu &L,const Stu &R);friend bool operator<(const Stu &L,const Stu &R);friend Stu operator-(Stu &L,const S…

【计算机概论 ①】- 电脑:辅助人脑的好工具

目录 一、电脑硬件的五大单元 二、一切设计的起点&#xff1a;CPU 的架构 三、其他单元的设备 四、运行流程 五、电脑的分类 六、电脑上面常用的计算单位&#xff08;容量、速度等&#xff09; 操作系统跟硬件有相当程度的关联性&#xff0c;所以&#xff0c;如果不了解一…

群晖Video Station 添加海报墙-新方法

海报墙 一般我们找到的都是mp4、mkv等格式的视频资源&#xff0c;而没有像上图这样的海报资源&#xff0c;那要怎样实现海报墙呢&#xff1f; 按照以前的方法&#xff0c;是可以通过The Movie Database的API Key来搜刮电影海报信息&#xff0c;但是现在这个方法不行了 现在介绍…

随想录二刷Day27——回溯

文章目录 回溯7. 组合总和8. 组合总和 II 回溯 7. 组合总和 39. 组合总和 思路&#xff1a; 基本的递归回溯&#xff0c;只不过这里递归树每层的起始索引位置变成了 i &#xff0c;而不是下一个元素的索引 i1&#xff0c;因为可以重复选择。 复杂度&#xff1a; O ( n 2 n ) …

Docker容器间网络共享

Docker容器间网络共享 1、新建网络2、容器绑定网卡3、验证 Docker环境中为了一套应用部署多个环境、并且不修改配置文件的情况下&#xff0c;做到一键部署。要求不同容器直接的网络交互&#xff0c;使用容器名称。 网络相关常用命令 #查看网络内部信息docker network inspect b…

eclipse中设置自动补齐代码

eclipse中设置自动补齐代码 01 在window里找到preference 02 在preference里搜索content assist 03 在Java的content assist设置 设置为.abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ 04 apply and close即可

R文件详细介绍、瘦身

R 文件可能是很多 Android 开发者既熟悉又陌生的存在。它无处不在&#xff0c;所有使用到资源的地方都离不开它。它又有些陌生&#xff0c;google 已经把它封装的很完美了&#xff0c;以至于很多开发者并不知道它是怎么工作的。那么我们今天就来揭开它神秘的面纱。 R.id 这是一…

8.整数转换为浮点数【2023.11.30】

1.问题描述 整数转换为浮点数。 2.解决思路 使用input函数读取输入的整数 input_int int(input()) #将整数转换为浮点数类型 output_float float(input_int) 3.代码实现 numint(input("请输入一个整数")) num1float(num) print(num1)4.运行结果

GD32 定时器输入捕获模式测量PWM占空比和频率

简介 利用GD32 定时器的PWM输入捕获模式来实现PWM波形的占空比和频率的测量。相应的简介可以参考GD32用户手册中关于定时器输入捕获的章节&#xff0c;PWM输入捕获模式是输入捕获模式的一个特例。(记录自己学习过程&#xff0c;如有错误请留言指出) 原理 如何利用定时器测量…

VUE设计与实现共读系列之ref的实现【响应式原理】

前言 我们先顺一下vue使用响应式数据的流程&#xff1a; vue 是通过 ref 和 reactive 来创建响应式值&#xff0c;改变响应式值&#xff0c;视图跟着发生变化。 我们今天就来看一下ref和reactive是如何实现的 准备 首先&#xff0c;打开ref函数的位置 我们可以看到一个被re…

SmartSoftHelp8,SQL语句优化,耗时,返回数据行,kb

SQL语句优化 SQL语句耗时测试&#xff0c;耗时优化 SQL语句查询返回数据行统计 SQL语句查询返回数据大小统计&#xff0c;kb 总量统计 下载地址&#xff1a;https://pan.baidu.com/s/1zBgeYsqWnSlNgiKPR2lUYg?pwd8888

施人玫瑰手留余香和影像组学、医学人工智能未来漫谈

今天收到进阶班学员的留言&#xff1a; 提示&#xff1a;本文有硬核软文嫌疑&#xff0c;请慎重阅读。“ 我用您给我们讲的CLEAR&#xff0c;与一个审稿人进行了battle。有理有据。评估下来&#xff0c;我感觉我们的文章还是挺符合CLEAR的。” 我从来不排斥在商言商&#xff0…

12月02日每日信息差

_灵感 &#x1f396; 六国入境免签首日2029人次享便利 &#x1f384; 国内首个超大规模“光伏气膜”项目在江苏投运 &#x1f30d; 东京将推出氢气交易市场 &#x1f30b; 中国疾控中心&#xff1a;建议尽早接种流感疫苗&#xff0c;尤其是老年人和儿童 &#x1f381; 偏高1.…

【Qt开发流程】之事件系统1:事件系统描述及键盘事件

Qt的事件系统 在Qt中&#xff0c;事件是对象&#xff0c;派生自抽象的QEvent类&#xff0c;它表示应用程序内部发生的事情或作为应用程序需要知道的外部活动的结果。事件可以由QObject子类的任何实例接收和处理&#xff0c;但它们与小部件特别相关。以下描述了在典型应用程序中…

基于ZLMediaKit的webrtc实时视频传输demo搭建

环境 ubuntu 20.04 ​ gcc version 9.4.0 ​ cmake version 3.16.3 部署ZLMediaKit流媒体服务器 安装openssl 首先可以检查一下自己的openssl的版本如果是1.1.1以上就可以忽略这一步 wget https://www.openssl.org/source/openssl-1.1.1k.tar.gz tar -xvzf openssl-1.1.1k…