目录
STM32作业设计
STM32作业实现(一)串口通信
STM32作业实现(二)串口控制led
STM32作业实现(三)串口控制有源蜂鸣器
STM32作业实现(四)光敏传感器
STM32作业实现(五)温湿度传感器dht11
STM32作业实现(六)闪存保存数据
STM32作业实现(七)OLED显示数据
STM32作业实现(八)触摸按键TPAD
STM32作业实现(九)驱动舵机
源码位置
开启IIC所需引脚(ssd1306)
编写ssd1306驱动文件
oled.h
#ifndef __OLED_H__
#define __OLED_H__#include "stm32f1xx_hal.h" //链接HAL库
/**************************************BMP图片声明图片格式为二位数组，下标分别对应图片的宽和高：BMP_xx[H/8][L];
**************************************/
extern const uint8_t BMP_Picture[32 / 8][32];/* 设置坐标点的状态 */
typedef enum
{SET_PIXEL = 0x01,RESET_PIXEL = 0x00,
} PixelStatus;/* 功能函数声明 */
// 写数据，硬件IIC使用
void HAL_I2C_WriteByte(uint8_t addr, uint8_t data);
// 写命令
void WriteCmd(uint8_t IIC_Command);
// 写数据
void WriteDat(uint8_t IIC_Data);
// 初始化OLED
void OLED_Init(void);
// 设置起始点坐标
void OLED_SetPos(unsigned char x, unsigned char y);
// 开启电荷泵
void OLED_ON(void);
// 关闭电荷泵
void OLED_OFF(void);
// 刷新缓冲区数据到GDDRAM
void OLED_RefreshRAM(void);
// 清除数据缓冲区OLED_RAM buffer
void OLED_ClearRAM(void);
// 全屏填充
void OLED_FullyFill(uint8_t fill_Data);
// 清屏
void OLED_FullyClear(void);
// 获得坐标像素点数据
PixelStatus OLED_GetPixel(int16_t x, int16_t y);/* 显示指定字符和图片时需要手动刷新缓冲区到GDDRAM* function list: OLED_ShowStr\OLED_ShowCN\OLED_Show_MixedCH\OLED_DrawBMP*/
// 显示英文字符串
void OLED_ShowStr(unsigned char x, unsigned char y, unsigned char *ch, unsigned char TextSize);
// 显示整数用的
void OLED_ShowStr1(unsigned char x, unsigned char y, int *ch, unsigned char j, unsigned char TextSize);
// 显示中文字符串
void OLED_ShowCN(unsigned char x, unsigned char y, unsigned char N);
// 全屏垂直滚动播放
void OLED_VerticalShift(void);
// 全屏水平滚动播放
void OLED_HorizontalShift(uint8_t direction);
// 全屏同时垂直和水平滚动播放
void OLED_VerticalAndHorizontalShift(uint8_t direction);
// 屏幕内容取反显示
void OLED_DisplayMode(uint8_t mode);
// 屏幕亮度调节
void OLED_IntensityControl(uint8_t intensity);
//--------------------------------------------------------------
// Prototype : void OLED_DrawBMP(unsigned char x0,unsigned char y0,unsigned char x1,unsigned char y1,unsigned char BMP[]);
// Calls :
// Parameters : x0,y0 -- 起始点坐标(x0:0~127, y0:0~7); x1,y1 -- 起点对角线(结束点)的坐标(x1:1~128,y1:1~8)
// Description : 显示BMP位图
//--------------------------------------------------------------
void OLED_DrawBMP(unsigned char x0, unsigned char y0, unsigned char x1, unsigned char y1, unsigned char BMP[]);#endifoled.c
#include "stm32f1xx_hal.h" //链接HAL库
#include "codetap.h" //字库文件
#include "oled.h" //声明/* 控制宏 */
#define LEFT 0x27
#define RIGHT 0x26
#define UP 0X29
#define DOWM 0x2A
#define ON 0xA7
#define OFF 0xA6/* IIC接口选择 */
#define IICx hi2c1
extern I2C_HandleTypeDef hi2c1; // HAL库使用，指定硬件IIC接口// oled显示尺寸
uint16_t const displayWidth = 130;
uint16_t const displayHeight = 64;/* OLED显存
[0]0 1 2 3 ... 127
[1]0 1 2 3 ... 127
[2]0 1 2 3 ... 127
[3]0 1 2 3 ... 127
[4]0 1 2 3 ... 127
[5]0 1 2 3 ... 127
[6]0 1 2 3 ... 127
[7]0 1 2 3 ... 127 */static uint8_t OLED_RAM[8][130]; // 定义GDDRAM缓存区/***************************************************I2C总线传出数据函数：addr : 要写入的地址（OLED的地址一般为0x40;指令地址为0x00）data : 要写入的数据
***************************************************/
void HAL_I2C_WriteByte(uint8_t addr, uint8_t data)
{uint8_t TxData[2] = {addr, data};HAL_I2C_Master_Transmit(&IICx, 0X78, (uint8_t *)TxData, 2, 10);
}/**************************************************************Prototype : void WriteCmd(uint8_t IIC_Command)Parameters : IIC_Commandreturn : noneDescription : 写命令（通过HAL_I2C_WriteByte中的HAL_I2C_Master_Transmit向0x00写入命令）
***************************************************************/
void WriteCmd(uint8_t IIC_Command)
{HAL_I2C_WriteByte(0x00, IIC_Command);
}/**************************************************************Prototype : void WriteDat(uint8_t IIC_Data)Parameters : IIC_Datareturn : noneDescription : 写数据（通过HAL_I2C_WriteByte中的HAL_I2C_Master_Transmit向0x40写入数据）
***************************************************************/
void WriteDat(uint8_t IIC_Data)
{HAL_I2C_WriteByte(0x40, IIC_Data);
}/**************************************************************Prototype : void OLED_Init(void)Parameters : nonereturn : noneDescription : 初始化OLED模块
***************************************************************/
void OLED_Init(void)
{HAL_Delay(500); // HAL延时函数WriteCmd(0xAE); // 关显示WriteCmd(0x20); // 设置内存寻址模式WriteCmd(0x10); // 00，水平寻址模式;01，垂直寻址模式;10，页面寻址模式(重置);11，无效WriteCmd(0xb0); // 为页面寻址模式设置页面开始地址，0-7WriteCmd(0x00); //---设置低列地址WriteCmd(0x10); //---设置高列地址WriteCmd(0xc8); // 设置COM输出扫描方向WriteCmd(0x40); //--设置起始行地址WriteCmd(0x81); //--set contrast control registerWriteCmd(0xff); // 亮度调节 0x00~0xffWriteCmd(0xa1); //--设置段重新映射0到127WriteCmd(0xa6); //--设置正常显示WriteCmd(0xa8); //--设置复用比(1 ~ 64)WriteCmd(0x3F); //WriteCmd(0xa4); // 0xa4,输出遵循RAM内容;0xa5,Output忽略RAM内容WriteCmd(0xd3); //-设置显示抵消WriteCmd(0x00); //-not offsetWriteCmd(0xd5); //--设置显示时钟分频/振荡器频率WriteCmd(0xf0); //--设置分率WriteCmd(0xd9); //--设置pre-charge时期WriteCmd(0x22); //WriteCmd(0xda); //--设置com大头针硬件配置WriteCmd(0x12);WriteCmd(0xdb); //--设置vcomhWriteCmd(0x20); // 0x20,0.77xVccWriteCmd(0x8d); //--设置DC-DCWriteCmd(0x14); //WriteCmd(0xaf); //--打开oled面板OLED_FullyClear(); // 清屏
}void OLED_SetPos(unsigned char x, unsigned char y) // 设置起始点坐标
{WriteCmd(0xb0 + y); // y表示字符在哪一行，把0.96寸的屏幕分成0~7行，8个像素// 为一行，总高度64个像素WriteCmd(((x & 0xf0) >> 4) | 0x10); // x表示oled屏的行像素起点位置，表示每个矩阵的左上角坐标WriteCmd((x & 0x0f) | 0x01);
}/**************************************************************Prototype : void OLED_ON(void)Parameters : nonereturn : noneDescription : 将OLED从休眠中唤醒
***************************************************************/
void OLED_ON(void)
{WriteCmd(0X8D); // 设置电荷泵WriteCmd(0X14); // 开启电荷泵WriteCmd(0XAF); // OLED唤醒
}/**************************************************************Prototype : void OLED_OFF(void)Parameters : nonereturn : noneDescription : 让OLED休眠 -- 休眠模式下,OLED功耗不到10uA
***************************************************************/
void OLED_OFF(void)
{WriteCmd(0X8D); // 设置电荷泵WriteCmd(0X10); // 关闭电荷泵WriteCmd(0XAE); // OLED休眠
}/**************************************************************Prototype : void OLED_RefreshRAM(void)Parameters : nonereturn : noneDescription : 全屏填充
***************************************************************/
void OLED_RefreshRAM(void)
{// 页寻址模式填充for (uint16_t m = 0; m < displayHeight / 8; m++){WriteCmd(0xb0 + m); // 设置页地址b0~b7WriteCmd(0x00); // 设置显示位置—列低地址00-0fWriteCmd(0x10); // 设置显示位置—列高地址10-1ffor (uint16_t n = 0; n < displayWidth; n++){WriteDat(OLED_RAM[m][n]);}}
}/**************************************************************Prototype : void OLED_ClearRAM(void)Parameters : nonereturn : noneDescription : 清除数据缓冲区
***************************************************************/
void OLED_ClearRAM(void)
{for (uint16_t m = 0; m < displayHeight / 8; m++){for (uint16_t n = 0; n < displayWidth; n++){OLED_RAM[m][n] = 0x00;}}
}/**************************************************************Prototype : void OLED_Fill(uint8_t fill_Data)Parameters : fill_Data 填充的1字节数据return : noneDescription : 全屏填充 0x00~0xff
***************************************************************/
void OLED_FullyFill(unsigned char fill_Data)
{for (uint16_t m = 0; m < displayHeight / 8; m++){for (uint16_t n = 0; n < displayWidth; n++){OLED_RAM[m][n] = fill_Data;}}OLED_RefreshRAM();
}/**************************************************************Prototype : void OLED_FullyClear(void)Parameters : nonereturn : noneDescription : 全屏清除
***************************************************************/
void OLED_FullyClear(void)
{OLED_FullyFill(RESET_PIXEL);
}/**************************************************************Prototype : void OLED_GetPixel(int16_t x, int16_t y)Parameters : x,y -- 起始点坐标(x:0~127, y:0~63);return : PixelStatus 像素点状态 SET_PIXEL = 1, RESET_PIXEL = 0Description : 获得坐标像素点数据（对于0.96寸的屏幕来说，没啥用）
***************************************************************/
PixelStatus OLED_GetPixel(int16_t x, int16_t y)
{if (OLED_RAM[y / 8][x] >> (y % 8) & 0x01)return SET_PIXEL;return RESET_PIXEL;
}/**************************************************************Prototype : void OLED_ShowStr1(unsigned char x, unsigned char y, int *ch,unsigned char s, unsigned char TextSize)Parameters : x,y -- 起始点坐标(x:0~127, y:0~63);*ch -- 要显示的数字;s----- 数字的位数TextSize -- 字符大小(1:6*8 ; 2:8*16)return : noneDescription : 显示codetab.h中的ASCII字符,有6*8和8*16可选择
***************************************************************/
void OLED_ShowStr1(unsigned char x, unsigned char y, int *ch, unsigned char s, unsigned char TextSize)
{unsigned char c = 0, i = 0, j = 0;switch (TextSize){case 1:{while (s--){c = (ch[j] + 16);if (x > 126){x = 0;y++;}OLED_SetPos(x, y);for (i = 0; i < 6; i++)WriteDat(F6x8[c][i]);x += 6;j++;}}break;case 2:{while (s--){c = (ch[j] + 16);if (x > 120){x = 0;y++;}OLED_SetPos(x, y);for (i = 0; i < 8; i++)WriteDat(F8X16[c * 16 + i]);OLED_SetPos(x, y + 1);for (i = 0; i < 8; i++)WriteDat(F8X16[c * 16 + i + 8]);x += 8;j++;}}break;}
}/**************************************************************Prototype : void OLED_ShowCN(int16_t x, int16_t y, uint8_t* n)Parameters : x,y -- 起始点坐标(x:0~127, y:0~7);N[]:汉字在codetab.h中的索引（就是第几行）return : noneDescription : 显示codetab.h中的汉字,16*16点阵
***************************************************************/void OLED_ShowCN(unsigned char x, unsigned char y, unsigned char N)
{unsigned char wm = 0;unsigned int adder = 32 * N;OLED_SetPos(x, y);for (wm = 0; wm < 16; wm++){WriteDat(F16x16[adder]);adder += 1;}OLED_SetPos(x, y + 1);for (wm = 0; wm < 16; wm++){WriteDat(F16x16[adder]);adder += 1;}
}
/**************************************************************Prototype : void OLED_FullyToggle(void)Parameters : nonereturn : noneDescription : 缓冲区数据取反后刷新到GDDRAM
***************************************************************/
void OLED_FullyToggle(void)
{for (uint16_t m = 0; m < displayHeight / 8; m++){for (uint16_t n = 0; n < displayWidth; n++){OLED_RAM[m][n] = ~OLED_RAM[m][n];}}OLED_RefreshRAM();
}/****************************************************************全屏垂直偏移,0->63方向方向垂直向上,范围0-63方向垂直向下,范围63-0
****************************************************************/
void OLED_VerticalShift(void)
{for (uint8_t i = 0; i < displayHeight; i++){WriteCmd(0xd3); // 设置显示偏移，0->63方向WriteCmd(i); // 偏移量HAL_Delay(40); // 延时时间}
}/****************************************************************屏幕内容水平全屏滚动播放左 LEFT 0x27右 RIGHT 0x26
****************************************************************/
void OLED_HorizontalShift(uint8_t direction){WriteCmd(direction); // 设置滚动方向WriteCmd(0x00); // 虚拟字节设置，默认为0x00WriteCmd(0x00); // 设置开始页地址WriteCmd(0x05); // 设置每个滚动步骤之间的时间间隔的帧频WriteCmd(0x07); // 设置结束页地址WriteCmd(0x00); // 虚拟字节设置，默认为0x00WriteCmd(0xff); // 虚拟字节设置，默认为0xffWriteCmd(0x2f); // 开启滚动-0x2f，禁用滚动-0x2e，禁用需要重写数据
}/****************************************************************屏幕内容垂直水平全屏滚动播放上 UP 0x29下 DOWN 0x2A
****************************************************************/
void OLED_VerticalAndHorizontalShift(uint8_t direction)
{WriteCmd(direction); // 设置滚动方向WriteCmd(0x00); // 虚拟字节设置，默认为0x00WriteCmd(0x00); // 设置开始页地址WriteCmd(0x05); // 设置每个滚动步骤之间的时间间隔的帧频WriteCmd(0x07); // 设置结束页地址WriteCmd(0x01); // 垂直滚动偏移量WriteCmd(0x2f); // 开启滚动-0x2f，禁用滚动-0x2e，禁用需要重写数据
}/****************************************************************屏幕内容取反显示开 ON 0xA7关 OFF 0xA6 默认此模式，设置像素点亮
****************************************************************/
void OLED_DisplayMode(uint8_t mode)
{WriteCmd(mode);
}/****************************************************************屏幕亮度调节intensity 0-255默认为0x7f
****************************************************************/
void OLED_IntensityControl(uint8_t intensity)
{WriteCmd(0x81);WriteCmd(intensity);
}
void OLED_DrawBMP(unsigned char x0, unsigned char y0, unsigned char x1, unsigned char y1, unsigned char BMP[]) // X0是图像的起始位置，y0是图像的起始行，X1是图像的宽度，Y1是图像的显示高度1~8；
{unsigned int j = 0;unsigned char x, y;if (y1 % 8 == 0)y = y1 / 8;elsey = y1 / 8 + 1;for (y = y0; y < y1; y++){OLED_SetPos(x0, y);for (x = x0; x < x1; x++){WriteDat(BMP[j++]);}}
}
/************************************************************Prototype : void OLED_ShowStr1(unsigned char x, unsigned char y, int *ch,unsigned char s, unsigned char TextSize)Parameters : x,y -- 起始点坐标(x:0~127, y:0~63);*ch -- 要显示的ASCII字符,可以直接传递字符串;TextSize -- 字符大小(1:6*8 ; 2:8*16)return : noneDescription : 显示codetab.h中的ASCII字符,有6*8和8*16可选择***********************************************************/
void OLED_ShowStr(unsigned char x, unsigned char y, unsigned char *ch, unsigned char TextSize)
{unsigned char c = 0, i = 0, j = 0;switch (TextSize){case 1:{while (ch[j] != '\0'){c = ch[j] - 32;if (x > 126){x = 0;y++;}OLED_SetPos(x, y);for (i = 0; i < 6; i++)WriteDat(F6x8[c][i]);x += 6;j++;}}break;case 2:{while (ch[j] != '\0'){c = ch[j] - 32;if (x > 120){x = 0;y++;}OLED_SetPos(x, y);for (i = 0; i < 8; i++)WriteDat(F8X16[c * 16 + i]);OLED_SetPos(x, y + 1);for (i = 0; i < 8; i++)WriteDat(F8X16[c * 16 + i + 8]);x += 8;j++;}}break;}
}设计字模文件使用 PCtoLCD2002 软件
配置如下
字库文件
codetap.h
/***************************16*16的点阵字体取模方式：共阴——列行式——逆向输出*********/
const unsigned char F16x16[] =
{
0x40,0x40,0x42,0xCC,0x00,0x04,0xF4,0x94,0x94,0xFF,0x94,0x94,0xF4,0x04,0x00,0x00,
0x00,0x40,0x20,0x1F,0x20,0x48,0x44,0x42,0x41,0x5F,0x41,0x42,0x44,0x48,0x40,0x00,//速00x00,0x00,0xFC,0x24,0x24,0x24,0xFC,0x25,0x26,0x24,0xFC,0x24,0x24,0x24,0x04,0x00,
0x40,0x30,0x8F,0x80,0x84,0x4C,0x55,0x25,0x25,0x25,0x55,0x4C,0x80,0x80,0x80,0x00,//度10x40,0x40,0x42,0x44,0x58,0xC0,0x40,0x7F,0x40,0xC0,0x50,0x48,0x46,0x40,0x40,0x00,
0x80,0x80,0x40,0x20,0x18,0x07,0x00,0x00,0x00,0x3F,0x40,0x40,0x40,0x40,0x78,0x00,//光20x00,0xFE,0x42,0x42,0x42,0xFE,0x00,0x42,0xA2,0x9E,0x82,0xA2,0xC2,0xBE,0x00,0x00,
0x80,0x6F,0x08,0x08,0x28,0xCF,0x00,0x00,0x2F,0xC8,0x08,0x08,0x28,0xCF,0x00,0x00,//照30x10,0x60,0x02,0x8C,0x00,0xFE,0x92,0x92,0x92,0x92,0x92,0x92,0xFE,0x00,0x00,0x00,
0x04,0x04,0x7E,0x01,0x44,0x48,0x50,0x7F,0x40,0x40,0x7F,0x50,0x48,0x44,0x40,0x00,//湿40x10,0x60,0x02,0x8C,0x00,0x00,0xFE,0x92,0x92,0x92,0x92,0x92,0xFE,0x00,0x00,0x00,
0x04,0x04,0x7E,0x01,0x40,0x7E,0x42,0x42,0x7E,0x42,0x7E,0x42,0x42,0x7E,0x40,0x00,//温50x00,0x00,0xFC,0x24,0x24,0x24,0xFC,0x25,0x26,0x24,0xFC,0x24,0x24,0x24,0x04,0x00,
0x40,0x30,0x8F,0x80,0x84,0x4C,0x55,0x25,0x25,0x25,0x55,0x4C,0x80,0x80,0x80,0x00,//度6};/************************************6*8的点阵************************************/
const unsigned char F6x8[][6] =
{0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 00x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 10x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 20x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 30x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 40x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 50x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 60x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 70x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 80x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 90x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 550x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};
/****************************************8*16的点阵************************************/
const unsigned char F8X16[]=
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 00x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 10x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 20x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 30x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 40xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 50x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 60x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 70x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 80x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 90x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 100x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 110x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 120x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 130x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 140x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 150x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 160x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 170x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 180x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 190x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 200x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 210x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 220x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 230x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 240x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 250x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 260x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 270x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 280x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 290x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 300x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 310xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 320x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 330x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 340xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 350x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 360x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 370x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 380xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 390x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 400x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 410x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 420x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 430x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 440x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 450x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 460xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 470x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 480xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 490x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 500x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 510x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 520x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 530x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 540xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 550x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 560x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 570x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 580x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 590x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 600x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 610x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 620x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 630x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 640x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 650x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 660x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 670x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 680x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 690x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 700x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 710x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 720x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 730x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 740x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 750x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 760x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 770x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 780x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 790x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 800x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 810x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 820x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 830x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 840x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 850x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 860x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 870x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 880x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 890x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 900x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 910x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 920x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 930x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};
![[数据集][目标检测]老鼠检测数据集VOC+YOLO格式4107张1类别](https://img-blog.csdnimg.cn/direct/9290e202057b41ab83eae6cfd8f50f0e.png)
